mirror of
https://github.com/AsahiLinux/u-boot
synced 2024-11-14 08:57:58 +00:00
dce6538f5d
Two Indentation fixes. Catch requests for full-duplex transfers when driver configured for half-duplex operation only. Signed-off-by: Nick Thompson <nick.thompson@ge.com> Signed-off-by: Sandeep Paulraj <s-paulraj@ti.com>
296 lines
7.5 KiB
C
296 lines
7.5 KiB
C
/*
|
|
* Copyright (C) 2009 Texas Instruments Incorporated - http://www.ti.com/
|
|
*
|
|
* Driver for SPI controller on DaVinci. Based on atmel_spi.c
|
|
* by Atmel Corporation
|
|
*
|
|
* Copyright (C) 2007 Atmel Corporation
|
|
*
|
|
* See file CREDITS for list of people who contributed to this
|
|
* project.
|
|
*
|
|
* This program is free software; you can redistribute it and/or
|
|
* modify it under the terms of the GNU General Public License as
|
|
* published by the Free Software Foundation; either version 2 of
|
|
* the License, or (at your option) any later version.
|
|
*
|
|
* This program is distributed in the hope that it will be useful,
|
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
* GNU General Public License for more details.
|
|
*
|
|
* You should have received a copy of the GNU General Public License
|
|
* along with this program; if not, write to the Free Software
|
|
* Foundation, Inc., 59 Temple Place, Suite 330, Boston,
|
|
* MA 02111-1307 USA
|
|
*/
|
|
#include <common.h>
|
|
#include <spi.h>
|
|
#include <malloc.h>
|
|
#include <asm/io.h>
|
|
#include <asm/arch/hardware.h>
|
|
#include "davinci_spi.h"
|
|
|
|
void spi_init()
|
|
{
|
|
/* do nothing */
|
|
}
|
|
|
|
struct spi_slave *spi_setup_slave(unsigned int bus, unsigned int cs,
|
|
unsigned int max_hz, unsigned int mode)
|
|
{
|
|
struct davinci_spi_slave *ds;
|
|
|
|
if (!spi_cs_is_valid(bus, cs))
|
|
return NULL;
|
|
|
|
ds = malloc(sizeof(*ds));
|
|
if (!ds)
|
|
return NULL;
|
|
|
|
ds->slave.bus = bus;
|
|
ds->slave.cs = cs;
|
|
ds->regs = (struct davinci_spi_regs *)CONFIG_SYS_SPI_BASE;
|
|
ds->freq = max_hz;
|
|
|
|
return &ds->slave;
|
|
}
|
|
|
|
void spi_free_slave(struct spi_slave *slave)
|
|
{
|
|
struct davinci_spi_slave *ds = to_davinci_spi(slave);
|
|
|
|
free(ds);
|
|
}
|
|
|
|
int spi_claim_bus(struct spi_slave *slave)
|
|
{
|
|
struct davinci_spi_slave *ds = to_davinci_spi(slave);
|
|
unsigned int scalar;
|
|
|
|
/* Enable the SPI hardware */
|
|
writel(SPIGCR0_SPIRST_MASK, &ds->regs->gcr0);
|
|
udelay(1000);
|
|
writel(SPIGCR0_SPIENA_MASK, &ds->regs->gcr0);
|
|
|
|
/* Set master mode, powered up and not activated */
|
|
writel(SPIGCR1_MASTER_MASK | SPIGCR1_CLKMOD_MASK, &ds->regs->gcr1);
|
|
|
|
/* CS, CLK, SIMO and SOMI are functional pins */
|
|
writel((SPIPC0_EN0FUN_MASK | SPIPC0_CLKFUN_MASK |
|
|
SPIPC0_DOFUN_MASK | SPIPC0_DIFUN_MASK), &ds->regs->pc0);
|
|
|
|
/* setup format */
|
|
scalar = ((CONFIG_SYS_SPI_CLK / ds->freq) - 1) & 0xFF;
|
|
|
|
/*
|
|
* Use following format:
|
|
* character length = 8,
|
|
* clock signal delayed by half clk cycle,
|
|
* clock low in idle state - Mode 0,
|
|
* MSB shifted out first
|
|
*/
|
|
writel(8 | (scalar << SPIFMT_PRESCALE_SHIFT) |
|
|
(1 << SPIFMT_PHASE_SHIFT), &ds->regs->fmt0);
|
|
|
|
/*
|
|
* Including a minor delay. No science here. Should be good even with
|
|
* no delay
|
|
*/
|
|
writel((50 << SPI_C2TDELAY_SHIFT) |
|
|
(50 << SPI_T2CDELAY_SHIFT), &ds->regs->delay);
|
|
|
|
/* default chip select register */
|
|
writel(SPIDEF_CSDEF0_MASK, &ds->regs->def);
|
|
|
|
/* no interrupts */
|
|
writel(0, &ds->regs->int0);
|
|
writel(0, &ds->regs->lvl);
|
|
|
|
/* enable SPI */
|
|
writel((readl(&ds->regs->gcr1) | SPIGCR1_SPIENA_MASK), &ds->regs->gcr1);
|
|
|
|
return 0;
|
|
}
|
|
|
|
void spi_release_bus(struct spi_slave *slave)
|
|
{
|
|
struct davinci_spi_slave *ds = to_davinci_spi(slave);
|
|
|
|
/* Disable the SPI hardware */
|
|
writel(SPIGCR0_SPIRST_MASK, &ds->regs->gcr0);
|
|
}
|
|
|
|
/*
|
|
* This functions needs to act like a macro to avoid pipeline reloads in the
|
|
* loops below. Use always_inline. This gains us about 160KiB/s and the bloat
|
|
* appears to be zero bytes (da830).
|
|
*/
|
|
__attribute__((always_inline))
|
|
static inline u32 davinci_spi_xfer_data(struct davinci_spi_slave *ds, u32 data)
|
|
{
|
|
u32 buf_reg_val;
|
|
|
|
/* send out data */
|
|
writel(data, &ds->regs->dat1);
|
|
|
|
/* wait for the data to clock in/out */
|
|
while ((buf_reg_val = readl(&ds->regs->buf)) & SPIBUF_RXEMPTY_MASK)
|
|
;
|
|
|
|
return buf_reg_val;
|
|
}
|
|
|
|
static int davinci_spi_read(struct spi_slave *slave, unsigned int len,
|
|
u8 *rxp, unsigned long flags)
|
|
{
|
|
struct davinci_spi_slave *ds = to_davinci_spi(slave);
|
|
unsigned int data1_reg_val;
|
|
|
|
/* enable CS hold, CS[n] and clear the data bits */
|
|
data1_reg_val = ((1 << SPIDAT1_CSHOLD_SHIFT) |
|
|
(slave->cs << SPIDAT1_CSNR_SHIFT));
|
|
|
|
/* wait till TXFULL is deasserted */
|
|
while (readl(&ds->regs->buf) & SPIBUF_TXFULL_MASK)
|
|
;
|
|
|
|
/* preload the TX buffer to avoid clock starvation */
|
|
writel(data1_reg_val, &ds->regs->dat1);
|
|
|
|
/* keep reading 1 byte until only 1 byte left */
|
|
while ((len--) > 1)
|
|
*rxp++ = davinci_spi_xfer_data(ds, data1_reg_val);
|
|
|
|
/* clear CS hold when we reach the end */
|
|
if (flags & SPI_XFER_END)
|
|
data1_reg_val &= ~(1 << SPIDAT1_CSHOLD_SHIFT);
|
|
|
|
/* read the last byte */
|
|
*rxp = davinci_spi_xfer_data(ds, data1_reg_val);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int davinci_spi_write(struct spi_slave *slave, unsigned int len,
|
|
const u8 *txp, unsigned long flags)
|
|
{
|
|
struct davinci_spi_slave *ds = to_davinci_spi(slave);
|
|
unsigned int data1_reg_val;
|
|
|
|
/* enable CS hold and clear the data bits */
|
|
data1_reg_val = ((1 << SPIDAT1_CSHOLD_SHIFT) |
|
|
(slave->cs << SPIDAT1_CSNR_SHIFT));
|
|
|
|
/* wait till TXFULL is deasserted */
|
|
while (readl(&ds->regs->buf) & SPIBUF_TXFULL_MASK)
|
|
;
|
|
|
|
/* preload the TX buffer to avoid clock starvation */
|
|
if (len > 2) {
|
|
writel(data1_reg_val | *txp++, &ds->regs->dat1);
|
|
len--;
|
|
}
|
|
|
|
/* keep writing 1 byte until only 1 byte left */
|
|
while ((len--) > 1)
|
|
davinci_spi_xfer_data(ds, data1_reg_val | *txp++);
|
|
|
|
/* clear CS hold when we reach the end */
|
|
if (flags & SPI_XFER_END)
|
|
data1_reg_val &= ~(1 << SPIDAT1_CSHOLD_SHIFT);
|
|
|
|
/* write the last byte */
|
|
davinci_spi_xfer_data(ds, data1_reg_val | *txp);
|
|
|
|
return 0;
|
|
}
|
|
|
|
#ifndef CONFIG_SPI_HALF_DUPLEX
|
|
static int davinci_spi_read_write(struct spi_slave *slave, unsigned int len,
|
|
u8 *rxp, const u8 *txp, unsigned long flags)
|
|
{
|
|
struct davinci_spi_slave *ds = to_davinci_spi(slave);
|
|
unsigned int data1_reg_val;
|
|
|
|
/* enable CS hold and clear the data bits */
|
|
data1_reg_val = ((1 << SPIDAT1_CSHOLD_SHIFT) |
|
|
(slave->cs << SPIDAT1_CSNR_SHIFT));
|
|
|
|
/* wait till TXFULL is deasserted */
|
|
while (readl(&ds->regs->buf) & SPIBUF_TXFULL_MASK)
|
|
;
|
|
|
|
/* keep reading and writing 1 byte until only 1 byte left */
|
|
while ((len--) > 1)
|
|
*rxp++ = davinci_spi_xfer_data(ds, data1_reg_val | *txp++);
|
|
|
|
/* clear CS hold when we reach the end */
|
|
if (flags & SPI_XFER_END)
|
|
data1_reg_val &= ~(1 << SPIDAT1_CSHOLD_SHIFT);
|
|
|
|
/* read and write the last byte */
|
|
*rxp = davinci_spi_xfer_data(ds, data1_reg_val | *txp);
|
|
|
|
return 0;
|
|
}
|
|
#endif
|
|
|
|
int spi_xfer(struct spi_slave *slave, unsigned int bitlen,
|
|
const void *dout, void *din, unsigned long flags)
|
|
{
|
|
unsigned int len;
|
|
|
|
if (bitlen == 0)
|
|
/* Finish any previously submitted transfers */
|
|
goto out;
|
|
|
|
/*
|
|
* It's not clear how non-8-bit-aligned transfers are supposed to be
|
|
* represented as a stream of bytes...this is a limitation of
|
|
* the current SPI interface - here we terminate on receiving such a
|
|
* transfer request.
|
|
*/
|
|
if (bitlen % 8) {
|
|
/* Errors always terminate an ongoing transfer */
|
|
flags |= SPI_XFER_END;
|
|
goto out;
|
|
}
|
|
|
|
len = bitlen / 8;
|
|
|
|
if (!dout)
|
|
return davinci_spi_read(slave, len, din, flags);
|
|
else if (!din)
|
|
return davinci_spi_write(slave, len, dout, flags);
|
|
#ifndef CONFIG_SPI_HALF_DUPLEX
|
|
else
|
|
return davinci_spi_read_write(slave, len, din, dout, flags);
|
|
#else
|
|
printf("SPI full duplex transaction requested with "
|
|
"CONFIG_SPI_HALF_DUPLEX defined.\n");
|
|
flags |= SPI_XFER_END;
|
|
#endif
|
|
|
|
out:
|
|
if (flags & SPI_XFER_END) {
|
|
u8 dummy = 0;
|
|
davinci_spi_write(slave, 1, &dummy, flags);
|
|
}
|
|
return 0;
|
|
}
|
|
|
|
int spi_cs_is_valid(unsigned int bus, unsigned int cs)
|
|
{
|
|
return bus == 0 && cs == 0;
|
|
}
|
|
|
|
void spi_cs_activate(struct spi_slave *slave)
|
|
{
|
|
/* do nothing */
|
|
}
|
|
|
|
void spi_cs_deactivate(struct spi_slave *slave)
|
|
{
|
|
/* do nothing */
|
|
}
|