mirror of
https://github.com/AsahiLinux/u-boot
synced 2024-12-30 06:53:09 +00:00
48d1fb92a9
In case the i.MX8M Plus starts from eMMC BOOT1/BOOT2 HW partitions, the flash.bin container is stored at offset 0 from the start, that means the fitImage itb is at offset 0x2c0 instead of 0x300 sectors from the start. Handle this difference in custom spl_mmc_get_uboot_raw_sector() . Signed-off-by: Marek Vasut <marex@denx.de> Reviewed-by: Peng Fan <peng.fan@nxp.com> Reviewed-by: Jaehoon Chung <jh80.chung@samsung.com>
138 lines
3.4 KiB
C
138 lines
3.4 KiB
C
// SPDX-License-Identifier: GPL-2.0+
|
|
/*
|
|
* Copyright 2022 Marek Vasut <marex@denx.de>
|
|
*/
|
|
|
|
#include <common.h>
|
|
#include <hang.h>
|
|
#include <image.h>
|
|
#include <init.h>
|
|
#include <spl.h>
|
|
|
|
#include <asm-generic/gpio.h>
|
|
#include <asm/arch/clock.h>
|
|
#include <asm/arch/ddr.h>
|
|
#include <asm/arch/imx8mp_pins.h>
|
|
#include <asm/arch/sys_proto.h>
|
|
#include <asm/io.h>
|
|
#include <asm/mach-imx/boot_mode.h>
|
|
|
|
#include <dm/uclass.h>
|
|
#include <dm/device.h>
|
|
#include <dm/uclass-internal.h>
|
|
#include <dm/device-internal.h>
|
|
|
|
#include <power/pmic.h>
|
|
#include <power/pca9450.h>
|
|
|
|
#include "lpddr4_timing.h"
|
|
|
|
#include "../common/common.h"
|
|
|
|
DECLARE_GLOBAL_DATA_PTR;
|
|
|
|
int data_modul_imx_edm_sbc_board_power_init(void)
|
|
{
|
|
struct udevice *dev;
|
|
int ret;
|
|
|
|
ret = pmic_get("pmic@25", &dev);
|
|
if (ret == -ENODEV) {
|
|
puts("Failed to get PMIC\n");
|
|
return 0;
|
|
}
|
|
if (ret != 0)
|
|
return ret;
|
|
|
|
/* BUCKxOUT_DVS0/1 control BUCK123 output. */
|
|
pmic_reg_write(dev, PCA9450_BUCK123_DVS, 0x29);
|
|
|
|
/* Increase VDD_SOC to typical value 0.95V before first DRAM access. */
|
|
if (IS_ENABLED(CONFIG_IMX8M_VDD_SOC_850MV))
|
|
/* Set DVS0 to 0.85V for special case. */
|
|
pmic_reg_write(dev, PCA9450_BUCK1OUT_DVS0, 0x14);
|
|
else
|
|
pmic_reg_write(dev, PCA9450_BUCK1OUT_DVS0, 0x1c);
|
|
|
|
/* Set DVS1 to 0.85v for suspend. */
|
|
pmic_reg_write(dev, PCA9450_BUCK1OUT_DVS1, 0x14);
|
|
|
|
/*
|
|
* Enable DVS control through PMIC_STBY_REQ and
|
|
* set B1_ENMODE=1 (ON by PMIC_ON_REQ=H).
|
|
*/
|
|
pmic_reg_write(dev, PCA9450_BUCK1CTRL, 0x59);
|
|
|
|
/* Kernel uses OD/OD frequency for SoC. */
|
|
|
|
/* To avoid timing risk from SoC to ARM, increase VDD_ARM to OD voltage 0.95V */
|
|
pmic_reg_write(dev, PCA9450_BUCK2OUT_DVS0, 0x1c);
|
|
|
|
/* Set LDO4 and CONFIG2 to enable the I2C level translator. */
|
|
pmic_reg_write(dev, PCA9450_LDO4CTRL, 0x59);
|
|
pmic_reg_write(dev, PCA9450_CONFIG2, 0x1);
|
|
|
|
return 0;
|
|
}
|
|
|
|
int spl_board_boot_device(enum boot_device boot_dev_spl)
|
|
{
|
|
if (boot_dev_spl == SPI_NOR_BOOT) /* SPI NOR */
|
|
return BOOT_DEVICE_SPI;
|
|
|
|
if (boot_dev_spl == MMC3_BOOT) /* eMMC */
|
|
return BOOT_DEVICE_MMC2;
|
|
|
|
return BOOT_DEVICE_MMC1; /* SD */
|
|
}
|
|
|
|
void board_boot_order(u32 *spl_boot_list)
|
|
{
|
|
int boot_device = spl_boot_device();
|
|
|
|
spl_boot_list[0] = boot_device; /* 1:SD 2:eMMC 8:SPI NOR */
|
|
|
|
if (boot_device == BOOT_DEVICE_SPI) { /* SPI, eMMC, SD */
|
|
spl_boot_list[1] = BOOT_DEVICE_MMC2; /* eMMC */
|
|
spl_boot_list[2] = BOOT_DEVICE_MMC1; /* SD */
|
|
} else if (boot_device == BOOT_DEVICE_MMC1) { /* SD, eMMC, SPI */
|
|
spl_boot_list[1] = BOOT_DEVICE_MMC2; /* eMMC */
|
|
spl_boot_list[2] = BOOT_DEVICE_SPI; /* SPI */
|
|
} else { /* eMMC, SPI, SD */
|
|
spl_boot_list[1] = BOOT_DEVICE_SPI; /* SPI */
|
|
spl_boot_list[2] = BOOT_DEVICE_MMC1; /* SD */
|
|
}
|
|
|
|
spl_boot_list[3] = BOOT_DEVICE_UART; /* YModem */
|
|
spl_boot_list[4] = BOOT_DEVICE_NONE;
|
|
}
|
|
|
|
unsigned long spl_mmc_get_uboot_raw_sector(struct mmc *mmc, unsigned long sect)
|
|
{
|
|
const u32 boot_dev = spl_boot_device();
|
|
int part;
|
|
|
|
if (boot_dev == BOOT_DEVICE_MMC2) { /* eMMC */
|
|
part = spl_mmc_emmc_boot_partition(mmc);
|
|
if (part == 1 || part == 2) /* eMMC BOOT1/BOOT2 HW partitions */
|
|
return sect - 0x40;
|
|
}
|
|
|
|
return sect;
|
|
}
|
|
|
|
static struct dram_timing_info *dram_timing_info[8] = {
|
|
&dmo_imx8mp_sbc_dram_timing_32_32, /* 32 Gbit x32 */
|
|
NULL, /* 32 Gbit x16 */
|
|
NULL, /* 16 Gbit x32 */
|
|
NULL, /* 16 Gbit x16 */
|
|
NULL, /* 8 Gbit x32 */
|
|
NULL, /* 8 Gbit x16 */
|
|
NULL, /* INVALID */
|
|
NULL, /* INVALID */
|
|
};
|
|
|
|
void board_init_f(ulong dummy)
|
|
{
|
|
dmo_board_init_f(MX8MP_PAD_GPIO1_IO02__WDOG1_WDOG_B, dram_timing_info);
|
|
}
|