mirror of
https://github.com/AsahiLinux/u-boot
synced 2024-12-16 08:13:17 +00:00
23b1d8e24a
imx8mm-u-boot.dtsi passes the ATF load address via the 'entry' and 'load' properties. Remove the step that performs the ATF_LOAD_ADDR export, which is now unneeded. Signed-off-by: Fabio Estevam <festevam@denx.de> Reviewed-by: Patrick Wildt <patrick@blueri.se>
104 lines
2.4 KiB
ReStructuredText
104 lines
2.4 KiB
ReStructuredText
.. SPDX-License-Identifier: GPL-2.0+
|
|
|
|
Verdin iMX8M Mini Module
|
|
========================
|
|
|
|
Quick Start
|
|
-----------
|
|
|
|
- Build the ARM trusted firmware binary
|
|
- Get the DDR firmware
|
|
- Build U-Boot
|
|
- Flash to eMMC
|
|
- Boot
|
|
|
|
Get and Build the ARM Trusted Firmware (Trusted Firmware A)
|
|
-----------------------------------------------------------
|
|
|
|
.. code-block:: bash
|
|
|
|
$ echo "Downloading and building TF-A..."
|
|
$ git clone https://git.trustedfirmware.org/TF-A/trusted-firmware-a.git
|
|
$ cd trusted-firmware-a
|
|
|
|
Then build ATF (TF-A):
|
|
|
|
.. code-block:: bash
|
|
|
|
$ make PLAT=imx8mm IMX_BOOT_UART_BASE=0x30860000 bl31
|
|
$ cp build/imx8mm/release/bl31.bin ../
|
|
|
|
Get the DDR Firmware
|
|
--------------------
|
|
|
|
.. code-block:: bash
|
|
|
|
$ cd ..
|
|
$ wget https://www.nxp.com/lgfiles/NMG/MAD/YOCTO/firmware-imx-8.10.1.bin
|
|
$ chmod +x firmware-imx-8.10.1.bin
|
|
$ ./firmware-imx-8.10.1.bin
|
|
$ cp firmware-imx-8.10.1/firmware/ddr/synopsys/lpddr4*.bin ./
|
|
|
|
Build U-Boot
|
|
------------
|
|
.. code-block:: bash
|
|
|
|
$ export CROSS_COMPILE=aarch64-linux-gnu-
|
|
$ make verdin-imx8mm_defconfig
|
|
$ make
|
|
|
|
Flash to eMMC
|
|
-------------
|
|
|
|
.. code-block:: bash
|
|
|
|
> tftpboot ${loadaddr} flash.bin
|
|
> setexpr blkcnt ${filesize} + 0x1ff && setexpr blkcnt ${blkcnt} / 0x200
|
|
> mmc dev 0 1 && mmc write ${loadaddr} 0x2 ${blkcnt}
|
|
|
|
As a convenience, instead of the last two commands one may also use the update
|
|
U-Boot wrapper:
|
|
|
|
.. code-block:: bash
|
|
|
|
> run update_uboot
|
|
|
|
Boot
|
|
----
|
|
|
|
ATF, U-Boot proper and u-boot.dtb images are packed into FIT image,
|
|
which is loaded and parsed by SPL.
|
|
|
|
Boot sequence is:
|
|
|
|
* SPL ---> ATF (TF-A) ---> U-Boot proper
|
|
|
|
Output:
|
|
|
|
.. code-block:: bash
|
|
|
|
U-Boot SPL 2021.10-rc2-00028-gee010ba1129 (Aug 23 2021 - 16:56:02 +0200)
|
|
Normal Boot
|
|
WDT: Started with servicing (60s timeout)
|
|
Trying to boot from MMC1
|
|
NOTICE: BL31: v2.2(release):rel_imx_5.4.70_2.3.2_rc1-5-g835a8f67b
|
|
NOTICE: BL31: Built : 18:02:12, Aug 16 2021
|
|
|
|
|
|
U-Boot 2021.10-rc2-00028-gee010ba1129 (Aug 23 2021 - 16:56:02 +0200)
|
|
|
|
CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz
|
|
Reset cause: POR
|
|
DRAM: 2 GiB
|
|
WDT: Started with servicing (60s timeout)
|
|
MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2
|
|
Loading Environment from MMC... OK
|
|
In: serial
|
|
Out: serial
|
|
Err: serial
|
|
Model: Toradex Verdin iMX8M Mini Quad 2GB Wi-Fi / BT IT V1.1A, Serial# 06760554
|
|
Carrier: Toradex Verdin Development Board V1.1A, Serial# 10754333
|
|
Setting variant to wifi
|
|
Net: eth0: ethernet@30be0000
|
|
Hit any key to stop autoboot: 0
|
|
Verdin iMX8MM #
|