u-boot/board/freescale/t102xrdb/cpld.h
Shengzhou Liu 48c6f328f0 powerpc/t1024rdb: Add T1024 RDB board support
T1024RDB is a Freescale Reference Design Board that hosts the T1024 SoC.

T1024RDB board Overview
-----------------------
- T1024 SoC integrating two 64-bit e5500 cores up to 1.4GHz
- CoreNet fabric supporting coherent and noncoherent transactions with
  prioritization and bandwidth allocation
- 32-/64-bit DDR3L SDRAM memory controller with ECC and interleaving support
- Accelerator: DPAA components consist of FMan, BMan, QMan, DCE and SEC
- Ethernet interfaces:
  - Two 10M/100M/1G RGMII ports on-board
  - one 10Gbps XFI interface
- PCIe: Three PCIe controllers: one PCIe Slot and two Mini-PCIe connectors.
- SerDes: 4 lanes up to 10.3125GHz
- IFC: 128MB NOR Flash, 512MB NAND Flash and CPLD
- eSPI: 64MB N25Q512 SPI flash.
- Deep Sleep power implementaion (wakeup from GPIO/Timer/Ethernet/USB)
- USB: Two  Type-A USB2.0 ports with internal PHY
- eSDHC: Support SD, SDHC, SDXC and MMC/eMMC
- I2C: Four I2C controllers
- UART: Two UART serial ports

Signed-off-by: Shengzhou Liu <Shengzhou.Liu@freescale.com>
[York Sun: Fix ft_board_setup() type, fix MAINTAINERS for SECURE_BOOT
	   Fix Kconfig by adding SUPPORT_SPL]
Reviewed-by: York Sun <yorksun@freescale.com>
2014-12-05 08:06:15 -08:00

45 lines
1.6 KiB
C

/**
* Copyright 2014 Freescale Semiconductor
*
* SPDX-License-Identifier: GPL-2.0+
*
*/
struct cpld_data {
u8 cpld_ver; /* 0x00 - CPLD Major Revision Register */
u8 cpld_ver_sub; /* 0x01 - CPLD Minor Revision Register */
u8 hw_ver; /* 0x02 - Hardware Revision Register */
u8 sw_ver; /* 0x03 - Software Revision register */
u8 res0[12]; /* 0x04 - 0x0F - not used */
u8 reset_ctl1; /* 0x10 - Reset control Register1 */
u8 reset_ctl2; /* 0x11 - Reset control Register2 */
u8 int_status; /* 0x12 - Interrupt status Register */
u8 flash_csr; /* 0x13 - Flash control and status register */
u8 fan_ctl_status; /* 0x14 - Fan control and status register */
u8 led_ctl_status; /* 0x15 - LED control and status register */
u8 sfp_ctl_status; /* 0x16 - SFP control and status register */
u8 misc_ctl_status; /* 0x17 - Miscellanies ctrl & status register*/
u8 boot_override; /* 0x18 - Boot override register */
u8 boot_config1; /* 0x19 - Boot config override register*/
u8 boot_config2; /* 0x1A - Boot config override register*/
} cpld_data_t;
/* Pointer to the CPLD register set */
u8 cpld_read(unsigned int reg);
void cpld_write(unsigned int reg, u8 value);
#define CPLD_READ(reg) cpld_read(offsetof(struct cpld_data, reg))
#define CPLD_WRITE(reg, value)\
cpld_write(offsetof(struct cpld_data, reg), value)
/* CPLD on IFC */
#define CPLD_LBMAP_MASK 0x3F
#define CPLD_BANK_SEL_MASK 0x07
#define CPLD_BANK_OVERRIDE 0x40
#define CPLD_LBMAP_ALTBANK 0x44 /* BANK OR | BANK 4 */
#define CPLD_LBMAP_DFLTBANK 0x40 /* BANK OR | BANK 0 */
#define CPLD_LBMAP_RESET 0xFF
#define CPLD_LBMAP_SHIFT 0x03
#define CPLD_BOOT_SEL 0x80