mirror of
https://github.com/AsahiLinux/u-boot
synced 2024-12-11 05:42:58 +00:00
83d290c56f
When U-Boot started using SPDX tags we were among the early adopters and there weren't a lot of other examples to borrow from. So we picked the area of the file that usually had a full license text and replaced it with an appropriate SPDX-License-Identifier: entry. Since then, the Linux Kernel has adopted SPDX tags and they place it as the very first line in a file (except where shebangs are used, then it's second line) and with slightly different comment styles than us. In part due to community overlap, in part due to better tag visibility and in part for other minor reasons, switch over to that style. This commit changes all instances where we have a single declared license in the tag as both the before and after are identical in tag contents. There's also a few places where I found we did not have a tag and have introduced one. Signed-off-by: Tom Rini <trini@konsulko.com>
129 lines
3 KiB
C
129 lines
3 KiB
C
/* SPDX-License-Identifier: GPL-2.0+ */
|
|
/*
|
|
* iPAQ h2200 board configuration
|
|
*
|
|
* Copyright (C) 2012 Lukasz Dalek <luk0104@gmail.com>
|
|
*/
|
|
|
|
#ifndef __CONFIG_H
|
|
#define __CONFIG_H
|
|
|
|
#define CONFIG_MACH_TYPE MACH_TYPE_H2200
|
|
|
|
#define CONFIG_CPU_PXA25X 1
|
|
|
|
#define CONFIG_NR_DRAM_BANKS 1
|
|
#define PHYS_SDRAM_1 0xa0000000 /* SDRAM Bank #1 */
|
|
#define PHYS_SDRAM_1_SIZE 0x04000000 /* 64 MB */
|
|
|
|
#define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM_1
|
|
#define CONFIG_SYS_SDRAM_SIZE PHYS_SDRAM_1_SIZE
|
|
|
|
#define CONFIG_SYS_INIT_SP_ADDR 0xfffff800
|
|
|
|
#define CONFIG_ENV_SIZE 0x00040000
|
|
#define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + 128*1024)
|
|
|
|
#define CONFIG_SYS_LOAD_ADDR 0xa3000000 /* default load address */
|
|
|
|
/*
|
|
* iPAQ 1st stage bootloader loads 2nd stage bootloader
|
|
* at address 0xa0040000 but bootloader requires header
|
|
* which is 0x1000 long.
|
|
*
|
|
* --- Header begin ---
|
|
* .word 0xea0003fe ; b 0x1000
|
|
*
|
|
* .org 0x40
|
|
* .ascii "ECEC"
|
|
*
|
|
* .org 0x1000
|
|
* --- Header end ---
|
|
*/
|
|
|
|
/*
|
|
* Static chips
|
|
*/
|
|
|
|
#define CONFIG_SYS_MSC0_VAL 0x246c7ffc
|
|
#define CONFIG_SYS_MSC1_VAL 0x7ff07ff0
|
|
#define CONFIG_SYS_MSC2_VAL 0x7ff07ff0
|
|
|
|
/*
|
|
* PCMCIA and CF Interfaces
|
|
*/
|
|
|
|
#define CONFIG_SYS_MECR_VAL 0x00000000
|
|
#define CONFIG_SYS_MCMEM0_VAL 0x00000000
|
|
#define CONFIG_SYS_MCMEM1_VAL 0x00000000
|
|
#define CONFIG_SYS_MCATT0_VAL 0x00000000
|
|
#define CONFIG_SYS_MCATT1_VAL 0x00000000
|
|
#define CONFIG_SYS_MCIO0_VAL 0x00000000
|
|
#define CONFIG_SYS_MCIO1_VAL 0x00000000
|
|
|
|
#define CONFIG_SYS_FLYCNFG_VAL 0x00000000
|
|
#define CONFIG_SYS_SXCNFG_VAL 0x00040004
|
|
|
|
#define CONFIG_SYS_MDREFR_VAL 0x0099E018
|
|
#define CONFIG_SYS_MDCNFG_VAL 0x01C801CB
|
|
#define CONFIG_SYS_MDMRS_VAL 0x00220022
|
|
|
|
#define CONFIG_SYS_PSSR_VAL 0x00000000
|
|
#define CONFIG_SYS_CKEN 0x00004840
|
|
#define CONFIG_SYS_CCCR 0x00000161
|
|
|
|
/*
|
|
* GPIOs
|
|
*/
|
|
|
|
#define CONFIG_SYS_GPSR0_VAL 0x01000000
|
|
#define CONFIG_SYS_GPSR1_VAL 0x00000000
|
|
#define CONFIG_SYS_GPSR2_VAL 0x00010000
|
|
|
|
#define CONFIG_SYS_GPCR0_VAL 0x00000000
|
|
#define CONFIG_SYS_GPCR1_VAL 0x00000000
|
|
#define CONFIG_SYS_GPCR2_VAL 0x00000000
|
|
|
|
#define CONFIG_SYS_GPDR0_VAL 0xF7E38C00
|
|
#define CONFIG_SYS_GPDR1_VAL 0xBCFFBF83
|
|
#define CONFIG_SYS_GPDR2_VAL 0x000157FF
|
|
|
|
#define CONFIG_SYS_GAFR0_L_VAL 0x80401000
|
|
#define CONFIG_SYS_GAFR0_U_VAL 0x00000112
|
|
#define CONFIG_SYS_GAFR1_L_VAL 0x600A9550
|
|
#define CONFIG_SYS_GAFR1_U_VAL 0x0005AAAA
|
|
#define CONFIG_SYS_GAFR2_L_VAL 0x20000000
|
|
#define CONFIG_SYS_GAFR2_U_VAL 0x00000000
|
|
|
|
/*
|
|
* Serial port
|
|
*/
|
|
#define CONFIG_FFUART
|
|
|
|
#define CONFIG_SYS_BAUDRATE_TABLE { 9600, 38400, 115200 }
|
|
|
|
#define CONFIG_SETUP_MEMORY_TAGS
|
|
#define CONFIG_CMDLINE_TAG
|
|
#define CONFIG_INITRD_TAG
|
|
|
|
/* Monitor Command Prompt */
|
|
|
|
#define CONFIG_USB_DEV_PULLUP_GPIO 33
|
|
/* USB VBUS GPIO 3 */
|
|
|
|
#define CONFIG_BOOTCOMMAND \
|
|
"setenv downloaded 0 ; while test $downloaded -eq 0 ; do " \
|
|
"if bootp ; then setenv downloaded 1 ; fi ; done ; " \
|
|
"source :script ; " \
|
|
"bootm ; "
|
|
|
|
#define CONFIG_USB_GADGET_PXA2XX
|
|
#define CONFIG_USB_ETH_SUBSET
|
|
|
|
#define CONFIG_USBNET_DEV_ADDR "de:ad:be:ef:00:01"
|
|
#define CONFIG_EXTRA_ENV_SETTINGS \
|
|
"stdin=serial\0" \
|
|
"stdout=serial\0" \
|
|
"stderr=serial\0"
|
|
|
|
#endif /* __CONFIG_H */
|