u-boot/arch/arm/cpu/armv7/stv0991/clock.c
Vikas Manocha 2ce4eaf4c8 stv0991: enable ethernet support
Signed-off-by: Vikas Manocha <vikas.manocha@st.com>
2014-12-09 15:16:19 -05:00

41 lines
976 B
C

/*
* (C) Copyright 2014
* Vikas Manocha, ST Micoelectronics, vikas.manocha@st.com.
*
* SPDX-License-Identifier: GPL-2.0+
*/
#include <asm/io.h>
#include <asm/arch/hardware.h>
#include <asm/arch/stv0991_cgu.h>
#include<asm/arch/stv0991_periph.h>
static struct stv0991_cgu_regs *const stv0991_cgu_regs = \
(struct stv0991_cgu_regs *) (CGU_BASE_ADDR);
void enable_pll1(void)
{
/* pll1 already configured for 1000Mhz, just need to enable it */
writel(readl(&stv0991_cgu_regs->pll1_ctrl) & ~(0x01),
&stv0991_cgu_regs->pll1_ctrl);
}
void clock_setup(int peripheral)
{
switch (peripheral) {
case UART_CLOCK_CFG:
writel(UART_CLK_CFG, &stv0991_cgu_regs->uart_freq);
break;
case ETH_CLOCK_CFG:
enable_pll1();
writel(ETH_CLK_CFG, &stv0991_cgu_regs->eth_freq);
/* Clock selection for ethernet tx_clk & rx_clk*/
writel((readl(&stv0991_cgu_regs->eth_ctrl) & ETH_CLK_MASK)
| ETH_CLK_CTRL, &stv0991_cgu_regs->eth_ctrl);
break;
default:
break;
}
}