u-boot/lib/Makefile
Bryan O'Donoghue 32ce6179fb optee: Add lib entries for sharing OPTEE code across ports
This patch adds code to lib to enable sharing of useful OPTEE code between
board-ports and architectures. The code on lib/optee/optee.c comes from the
TI omap2 port. Eventually the OMAP2 code will be patched to include the
shared code. The intention here is to add more useful OPTEE specific code
as more functionality gets added.

Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Cc: Harinarayan Bhatta <harinarayan@ti.com>
Cc: Andrew F. Davis <afd@ti.com>
Cc: Tom Rini <trini@konsulko.com>
Cc: Kever Yang <kever.yang@rock-chips.com>
Cc: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
Cc: Peng Fan <peng.fan@nxp.com>
Tested-by: Peng Fan <peng.fan@nxp.com>
2018-03-19 16:14:23 -04:00

109 lines
2.9 KiB
Makefile

#
# (C) Copyright 2000-2006
# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
#
# SPDX-License-Identifier: GPL-2.0+
#
ifndef CONFIG_SPL_BUILD
obj-$(CONFIG_EFI) += efi/
obj-$(CONFIG_EFI_LOADER) += efi_driver/
obj-$(CONFIG_EFI_LOADER) += efi_loader/
obj-$(CONFIG_EFI_LOADER) += efi_selftest/
obj-$(CONFIG_LZMA) += lzma/
obj-$(CONFIG_BZIP2) += bzip2/
obj-$(CONFIG_TIZEN) += tizen/
obj-$(CONFIG_FIT) += libfdt/
obj-$(CONFIG_OF_LIVE) += of_live.o
obj-$(CONFIG_CMD_DHRYSTONE) += dhry/
obj-$(CONFIG_ARCH_AT91) += at91/
obj-$(CONFIG_OPTEE) += optee/
obj-$(CONFIG_AES) += aes.o
obj-y += charset.o
obj-$(CONFIG_USB_TTY) += circbuf.o
obj-y += crc7.o
obj-y += crc8.o
obj-y += crc16.o
obj-$(CONFIG_ERRNO_STR) += errno_str.o
obj-$(CONFIG_FIT) += fdtdec_common.o
obj-$(CONFIG_TEST_FDTDEC) += fdtdec_test.o
obj-$(CONFIG_GZIP_COMPRESSED) += gzip.o
obj-$(CONFIG_GENERATE_SMBIOS_TABLE) += smbios.o
obj-y += initcall.o
obj-$(CONFIG_LMB) += lmb.o
obj-y += ldiv.o
obj-$(CONFIG_LZ4) += lz4_wrapper.o
obj-$(CONFIG_MD5) += md5.o
obj-y += net_utils.o
obj-$(CONFIG_PHYSMEM) += physmem.o
obj-y += qsort.o
obj-y += rc4.o
obj-$(CONFIG_SUPPORT_EMMC_RPMB) += sha256.o
obj-$(CONFIG_TPM) += tpm.o
obj-$(CONFIG_RBTREE) += rbtree.o
obj-$(CONFIG_BITREVERSE) += bitrev.o
obj-y += list_sort.o
endif
obj-$(CONFIG_RSA) += rsa/
obj-$(CONFIG_SHA1) += sha1.o
obj-$(CONFIG_SHA256) += sha256.o
obj-$(CONFIG_$(SPL_)ZLIB) += zlib/
obj-$(CONFIG_$(SPL_)GZIP) += gunzip.o
obj-$(CONFIG_$(SPL_)LZO) += lzo/
obj-$(CONFIG_$(SPL_TPL_)SAVEENV) += qsort.o
obj-$(CONFIG_$(SPL_TPL_)OF_LIBFDT) += libfdt/
ifneq ($(CONFIG_$(SPL_TPL_)BUILD)$(CONFIG_$(SPL_TPL_)OF_PLATDATA),yy)
obj-$(CONFIG_$(SPL_TPL_)OF_CONTROL) += fdtdec_common.o
obj-$(CONFIG_$(SPL_TPL_)OF_CONTROL) += fdtdec.o
endif
ifdef CONFIG_SPL_BUILD
obj-$(CONFIG_SPL_YMODEM_SUPPORT) += crc16.o
obj-$(CONFIG_SPL_NET_SUPPORT) += net_utils.o
endif
obj-$(CONFIG_ADDR_MAP) += addr_map.o
obj-y += hashtable.o
obj-y += errno.o
obj-y += display_options.o
CFLAGS_display_options.o := $(if $(BUILD_TAG),-DBUILD_TAG='"$(BUILD_TAG)"')
obj-$(CONFIG_BCH) += bch.o
obj-y += crc32.o
obj-$(CONFIG_CRC32C) += crc32c.o
obj-y += ctype.o
obj-y += div64.o
obj-y += hang.o
obj-y += linux_compat.o
obj-y += linux_string.o
obj-y += membuff.o
obj-$(CONFIG_REGEX) += slre.o
obj-y += string.o
obj-y += tables_csum.o
obj-y += time.o
obj-$(CONFIG_TRACE) += trace.o
obj-$(CONFIG_LIB_UUID) += uuid.o
obj-$(CONFIG_LIB_RAND) += rand.o
ifdef CONFIG_SPL_BUILD
ifdef CONFIG_TPL_BUILD
SERIAL_SUPPORT := $(CONFIG_TPL_SERIAL_SUPPORT)
else
SERIAL_SUPPORT := $(CONFIG_SPL_SERIAL_SUPPORT)
endif
# SPL U-Boot may use full-printf, tiny-printf or none at all
ifdef CONFIG_USE_TINY_PRINTF
obj-$(SERIAL_SUPPORT) += tiny-printf.o panic.o strto.o
else
obj-$(SERIAL_SUPPORT) += vsprintf.o panic.o strto.o strmhz.o
endif
else
# Main U-Boot always uses the full printf support
obj-y += vsprintf.o panic.o strto.o strmhz.o
endif
subdir-ccflags-$(CONFIG_CC_OPTIMIZE_LIBS_FOR_SPEED) += -O2