mirror of
https://github.com/AsahiLinux/u-boot
synced 2024-11-06 13:14:27 +00:00
83d290c56f
When U-Boot started using SPDX tags we were among the early adopters and there weren't a lot of other examples to borrow from. So we picked the area of the file that usually had a full license text and replaced it with an appropriate SPDX-License-Identifier: entry. Since then, the Linux Kernel has adopted SPDX tags and they place it as the very first line in a file (except where shebangs are used, then it's second line) and with slightly different comment styles than us. In part due to community overlap, in part due to better tag visibility and in part for other minor reasons, switch over to that style. This commit changes all instances where we have a single declared license in the tag as both the before and after are identical in tag contents. There's also a few places where I found we did not have a tag and have introduced one. Signed-off-by: Tom Rini <trini@konsulko.com>
177 lines
4.4 KiB
C
177 lines
4.4 KiB
C
// SPDX-License-Identifier: GPL-2.0+
|
|
/*
|
|
* (C) Copyright 2012-2013
|
|
* Texas Instruments, <www.ti.com>
|
|
*/
|
|
#include <config.h>
|
|
#include <palmas.h>
|
|
|
|
void palmas_init_settings(void)
|
|
{
|
|
#ifdef CONFIG_PALMAS_SMPS7_FPWM
|
|
int err;
|
|
/*
|
|
* Set SMPS7 (1.8 V I/O supply on platforms with TWL6035/37) to
|
|
* forced PWM mode. This reduces noise (but affects efficiency).
|
|
*/
|
|
u8 val = SMPS_MODE_SLP_FPWM | SMPS_MODE_ACT_FPWM;
|
|
err = palmas_i2c_write_u8(TWL603X_CHIP_P1, SMPS7_CTRL, val);
|
|
if (err)
|
|
printf("palmas: could not force PWM for SMPS7: err = %d\n",
|
|
err);
|
|
#endif
|
|
}
|
|
|
|
#if defined(CONFIG_OMAP54XX)
|
|
int lp873x_mmc1_poweron_ldo(uint voltage)
|
|
{
|
|
if (palmas_i2c_write_u8(LP873X_LDO1_ADDR, LP873X_LDO1_VOLTAGE,
|
|
voltage)) {
|
|
printf("lp873x: could not set LDO1 voltage.\n");
|
|
return 1;
|
|
}
|
|
/* TURN ON LDO1 */
|
|
if (palmas_i2c_write_u8(LP873X_LDO1_ADDR, LP873X_LDO1_CTRL,
|
|
LP873X_LDO_CTRL_EN | LP873X_LDO_CTRL_RDIS_EN)) {
|
|
printf("lp873x: could not turn on LDO1.\n");
|
|
return 1;
|
|
}
|
|
return 0;
|
|
|
|
}
|
|
#endif
|
|
|
|
int palmas_mmc1_poweron_ldo(uint ldo_volt, uint ldo_ctrl, uint voltage)
|
|
{
|
|
u8 val = 0;
|
|
|
|
#if defined(CONFIG_DRA7XX)
|
|
int ret;
|
|
|
|
ret = palmas_i2c_write_u8(TPS65903X_CHIP_P1, ldo_volt, voltage);
|
|
if (ret) {
|
|
printf("tps65903x: could not set LDO1 voltage.\n");
|
|
return ret;
|
|
}
|
|
/* TURN ON LDO1 */
|
|
val = RSC_MODE_SLEEP | RSC_MODE_ACTIVE;
|
|
ret = palmas_i2c_write_u8(TPS65903X_CHIP_P1, ldo_ctrl, val);
|
|
if (ret) {
|
|
printf("tps65903x: could not turn on LDO1.\n");
|
|
return ret;
|
|
}
|
|
return 0;
|
|
#else
|
|
/*
|
|
* We assume that this is a OMAP543X + TWL603X board:
|
|
* Set TWL6035/37 LDO9 to 3.0 V
|
|
*/
|
|
val = LDO_VOLT_3V0;
|
|
return twl603x_mmc1_set_ldo9(val);
|
|
#endif
|
|
}
|
|
|
|
/*
|
|
* On some OMAP5 + TWL603X hardware the SD card socket and LDO9_IN are
|
|
* powered by an external 3.3 V regulator, while the output of LDO9
|
|
* supplies VDDS_SDCARD for the OMAP5 interface only. This implies that
|
|
* LDO9 could be set to 'bypass' mode when required (e.g. for 3.3 V cards).
|
|
*/
|
|
int twl603x_mmc1_set_ldo9(u8 vsel)
|
|
{
|
|
u8 cval = 0, vval = 0; /* Off by default */
|
|
int err;
|
|
|
|
if (vsel) {
|
|
/* Turn on */
|
|
if (vsel > LDO_VOLT_3V3) {
|
|
/* Put LDO9 in bypass */
|
|
cval = LDO9_BYP_EN | RSC_MODE_SLEEP | RSC_MODE_ACTIVE;
|
|
vval = LDO_VOLT_3V3;
|
|
} else {
|
|
cval = RSC_MODE_SLEEP | RSC_MODE_ACTIVE;
|
|
vval = vsel & 0x3f;
|
|
}
|
|
}
|
|
err = palmas_i2c_write_u8(TWL603X_CHIP_P1, LDO9_VOLTAGE, vval);
|
|
if (err) {
|
|
printf("twl603x: could not set LDO9 %s: err = %d\n",
|
|
vsel > LDO_VOLT_3V3 ? "bypass" : "voltage", err);
|
|
return err;
|
|
}
|
|
err = palmas_i2c_write_u8(TWL603X_CHIP_P1, LDO9_CTRL, cval);
|
|
if (err)
|
|
printf("twl603x: could not turn %s LDO9: err = %d\n",
|
|
cval ? "on" : "off", err);
|
|
return err;
|
|
}
|
|
|
|
#ifdef CONFIG_PALMAS_AUDPWR
|
|
/*
|
|
* Turn audio codec power and 32 kHz clock on/off. Use for
|
|
* testing OMAP543X + TWL603X + TWL604X boards only.
|
|
*/
|
|
int twl603x_audio_power(u8 on)
|
|
{
|
|
u8 cval = 0, vval = 0, c32k = 0;
|
|
int err;
|
|
|
|
if (on) {
|
|
vval = SMPS_VOLT_2V1;
|
|
cval = SMPS_MODE_SLP_AUTO | SMPS_MODE_ACT_AUTO;
|
|
c32k = RSC_MODE_SLEEP | RSC_MODE_ACTIVE;
|
|
}
|
|
/* Set SMPS9 to 2.1 V (for TWL604x), or to 0 (off) */
|
|
err = palmas_i2c_write_u8(TWL603X_CHIP_P1, SMPS9_VOLTAGE, vval);
|
|
if (err) {
|
|
printf("twl603x: could not set SMPS9 voltage: err = %d\n",
|
|
err);
|
|
return err;
|
|
}
|
|
/* Turn on or off SMPS9 */
|
|
err = palmas_i2c_write_u8(TWL603X_CHIP_P1, SMPS9_CTRL, cval);
|
|
if (err) {
|
|
printf("twl603x: could not turn SMPS9 %s: err = %d\n",
|
|
cval ? "on" : "off", err);
|
|
return err;
|
|
}
|
|
/* Output 32 kHz clock on or off */
|
|
err = palmas_i2c_write_u8(TWL603X_CHIP_P1, CLK32KGAUDIO_CTRL, c32k);
|
|
if (err)
|
|
printf("twl603x: could not turn CLK32KGAUDIO %s: err = %d\n",
|
|
c32k ? "on" : "off", err);
|
|
return err;
|
|
}
|
|
#endif
|
|
|
|
#ifdef CONFIG_PALMAS_USB_SS_PWR
|
|
/**
|
|
* @brief palmas_enable_ss_ldo - Configure EVM board specific configurations
|
|
* for the USB Super speed SMPS10 regulator.
|
|
*
|
|
* @return 0
|
|
*/
|
|
int palmas_enable_ss_ldo(void)
|
|
{
|
|
/* Enable smps10 regulator */
|
|
return palmas_i2c_write_u8(TWL603X_CHIP_P1, SMPS10_CTRL,
|
|
SMPS10_MODE_ACTIVE_D);
|
|
}
|
|
#endif
|
|
|
|
/*
|
|
* Enable/disable back-up battery (or super cap) charging on TWL6035/37.
|
|
* Please use defined BB_xxx values.
|
|
*/
|
|
int twl603x_enable_bb_charge(u8 bb_fields)
|
|
{
|
|
u8 val = bb_fields & 0x0f;
|
|
int err;
|
|
|
|
val |= (VRTC_EN_SLP | VRTC_EN_OFF | VRTC_PWEN);
|
|
err = palmas_i2c_write_u8(TWL603X_CHIP_P1, BB_VRTC_CTRL, val);
|
|
if (err)
|
|
printf("twl603x: could not set BB_VRTC_CTRL to 0x%02x: err = %d\n",
|
|
val, err);
|
|
return err;
|
|
}
|