u-boot/arch/arm/cpu/armv7/sunxi/usbc.c
Hans de Goede a90e77dbeb sunxi: usbc: Add support for usb-vbus0 controller by axp drivebus pin
The axp221 / axp223's N_VBUSEN pin can be configured as an output rather
then an input, and this is used on some boards to control usb-vbus0, add
support for this.

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: Ian Campbell <ijc@hellion.org.uk>
2015-01-14 14:56:40 +01:00

272 lines
6.2 KiB
C

/*
* Sunxi usb-controller code shared between the ehci and musb controllers
*
* Copyright (C) 2014 Roman Byshko
*
* Roman Byshko <rbyshko@gmail.com>
*
* Based on code from
* Allwinner Technology Co., Ltd. <www.allwinnertech.com>
*
* SPDX-License-Identifier: GPL-2.0+
*/
#include <asm/arch/clock.h>
#include <asm/arch/cpu.h>
#include <asm/arch/usbc.h>
#include <asm/gpio.h>
#include <asm/io.h>
#include <common.h>
#ifdef CONFIG_AXP152_POWER
#include <axp152.h>
#endif
#ifdef CONFIG_AXP209_POWER
#include <axp209.h>
#endif
#ifdef CONFIG_AXP221_POWER
#include <axp221.h>
#endif
#define SUNXI_USB_PMU_IRQ_ENABLE 0x800
#define SUNXI_USB_CSR 0x404
#define SUNXI_USB_PASSBY_EN 1
#define SUNXI_EHCI_AHB_ICHR8_EN (1 << 10)
#define SUNXI_EHCI_AHB_INCR4_BURST_EN (1 << 9)
#define SUNXI_EHCI_AHB_INCRX_ALIGN_EN (1 << 8)
#define SUNXI_EHCI_ULPI_BYPASS_EN (1 << 0)
static struct sunxi_usbc_hcd {
struct usb_hcd *hcd;
int usb_rst_mask;
int ahb_clk_mask;
int gpio_vbus;
int irq;
int id;
} sunxi_usbc_hcd[] = {
{
.usb_rst_mask = CCM_USB_CTRL_PHY0_RST | CCM_USB_CTRL_PHY0_CLK,
.ahb_clk_mask = 1 << AHB_GATE_OFFSET_USB0,
#if defined CONFIG_MACH_SUN6I || defined CONFIG_MACH_SUN8I
.irq = 71,
#else
.irq = 38,
#endif
.id = 0,
},
{
.usb_rst_mask = CCM_USB_CTRL_PHY1_RST | CCM_USB_CTRL_PHY1_CLK,
.ahb_clk_mask = 1 << AHB_GATE_OFFSET_USB_EHCI0,
#if defined CONFIG_MACH_SUN6I || defined CONFIG_MACH_SUN8I
.irq = 72,
#else
.irq = 39,
#endif
.id = 1,
},
#if (CONFIG_USB_MAX_CONTROLLER_COUNT > 1)
{
.usb_rst_mask = CCM_USB_CTRL_PHY2_RST | CCM_USB_CTRL_PHY2_CLK,
.ahb_clk_mask = 1 << AHB_GATE_OFFSET_USB_EHCI1,
#ifdef CONFIG_MACH_SUN6I
.irq = 74,
#else
.irq = 40,
#endif
.id = 2,
}
#endif
};
static int enabled_hcd_count;
static bool use_axp_drivebus(int index)
{
return index == 0 &&
strcmp(CONFIG_USB0_VBUS_PIN, "axp_drivebus") == 0;
}
void *sunxi_usbc_get_io_base(int index)
{
switch (index) {
case 0:
return (void *)SUNXI_USB0_BASE;
case 1:
return (void *)SUNXI_USB1_BASE;
case 2:
return (void *)SUNXI_USB2_BASE;
default:
return NULL;
}
}
static int get_vbus_gpio(int index)
{
if (use_axp_drivebus(index))
return -1;
switch (index) {
case 0: return sunxi_name_to_gpio(CONFIG_USB0_VBUS_PIN);
case 1: return sunxi_name_to_gpio(CONFIG_USB1_VBUS_PIN);
case 2: return sunxi_name_to_gpio(CONFIG_USB2_VBUS_PIN);
}
return -1;
}
static void usb_phy_write(struct sunxi_usbc_hcd *sunxi_usbc, int addr,
int data, int len)
{
int j = 0, usbc_bit = 0;
void *dest = sunxi_usbc_get_io_base(0) + SUNXI_USB_CSR;
usbc_bit = 1 << (sunxi_usbc->id * 2);
for (j = 0; j < len; j++) {
/* set the bit address to be written */
clrbits_le32(dest, 0xff << 8);
setbits_le32(dest, (addr + j) << 8);
clrbits_le32(dest, usbc_bit);
/* set data bit */
if (data & 0x1)
setbits_le32(dest, 1 << 7);
else
clrbits_le32(dest, 1 << 7);
setbits_le32(dest, usbc_bit);
clrbits_le32(dest, usbc_bit);
data >>= 1;
}
}
static void sunxi_usb_phy_init(struct sunxi_usbc_hcd *sunxi_usbc)
{
/* The following comments are machine
* translated from Chinese, you have been warned!
*/
/* Regulation 45 ohms */
if (sunxi_usbc->id == 0)
usb_phy_write(sunxi_usbc, 0x0c, 0x01, 1);
/* adjust PHY's magnitude and rate */
usb_phy_write(sunxi_usbc, 0x20, 0x14, 5);
/* threshold adjustment disconnect */
#if defined CONFIG_MACH_SUN4I || defined CONFIG_MACH_SUN6I
usb_phy_write(sunxi_usbc, 0x2a, 3, 2);
#else
usb_phy_write(sunxi_usbc, 0x2a, 2, 2);
#endif
return;
}
static void sunxi_usb_passby(struct sunxi_usbc_hcd *sunxi_usbc, int enable)
{
unsigned long bits = 0;
void *addr = sunxi_usbc_get_io_base(sunxi_usbc->id) +
SUNXI_USB_PMU_IRQ_ENABLE;
bits = SUNXI_EHCI_AHB_ICHR8_EN |
SUNXI_EHCI_AHB_INCR4_BURST_EN |
SUNXI_EHCI_AHB_INCRX_ALIGN_EN |
SUNXI_EHCI_ULPI_BYPASS_EN;
if (enable)
setbits_le32(addr, bits);
else
clrbits_le32(addr, bits);
return;
}
int sunxi_usbc_request_resources(int index)
{
struct sunxi_usbc_hcd *sunxi_usbc = &sunxi_usbc_hcd[index];
sunxi_usbc->gpio_vbus = get_vbus_gpio(index);
if (sunxi_usbc->gpio_vbus != -1)
return gpio_request(sunxi_usbc->gpio_vbus, "usbc_vbus");
return 0;
}
int sunxi_usbc_free_resources(int index)
{
struct sunxi_usbc_hcd *sunxi_usbc = &sunxi_usbc_hcd[index];
if (sunxi_usbc->gpio_vbus != -1)
return gpio_free(sunxi_usbc->gpio_vbus);
return 0;
}
void sunxi_usbc_enable(int index)
{
struct sunxi_usbc_hcd *sunxi_usbc = &sunxi_usbc_hcd[index];
struct sunxi_ccm_reg *ccm = (struct sunxi_ccm_reg *)SUNXI_CCM_BASE;
/* enable common PHY only once */
if (enabled_hcd_count == 0)
setbits_le32(&ccm->usb_clk_cfg, CCM_USB_CTRL_PHYGATE);
setbits_le32(&ccm->usb_clk_cfg, sunxi_usbc->usb_rst_mask);
setbits_le32(&ccm->ahb_gate0, sunxi_usbc->ahb_clk_mask);
#if defined CONFIG_MACH_SUN6I || defined CONFIG_MACH_SUN8I
setbits_le32(&ccm->ahb_reset0_cfg, sunxi_usbc->ahb_clk_mask);
#endif
sunxi_usb_phy_init(sunxi_usbc);
if (sunxi_usbc->id != 0)
sunxi_usb_passby(sunxi_usbc, SUNXI_USB_PASSBY_EN);
enabled_hcd_count++;
}
void sunxi_usbc_disable(int index)
{
struct sunxi_usbc_hcd *sunxi_usbc = &sunxi_usbc_hcd[index];
struct sunxi_ccm_reg *ccm = (struct sunxi_ccm_reg *)SUNXI_CCM_BASE;
if (sunxi_usbc->id != 0)
sunxi_usb_passby(sunxi_usbc, !SUNXI_USB_PASSBY_EN);
#if defined CONFIG_MACH_SUN6I || defined CONFIG_MACH_SUN8I
clrbits_le32(&ccm->ahb_reset0_cfg, sunxi_usbc->ahb_clk_mask);
#endif
clrbits_le32(&ccm->ahb_gate0, sunxi_usbc->ahb_clk_mask);
clrbits_le32(&ccm->usb_clk_cfg, sunxi_usbc->usb_rst_mask);
/* disable common PHY only once, for the last enabled hcd */
if (enabled_hcd_count == 1)
clrbits_le32(&ccm->usb_clk_cfg, CCM_USB_CTRL_PHYGATE);
enabled_hcd_count--;
}
void sunxi_usbc_vbus_enable(int index)
{
struct sunxi_usbc_hcd *sunxi_usbc = &sunxi_usbc_hcd[index];
#ifdef AXP_DRIVEBUS
if (use_axp_drivebus(index))
axp_drivebus_enable();
#endif
if (sunxi_usbc->gpio_vbus != -1)
gpio_direction_output(sunxi_usbc->gpio_vbus, 1);
}
void sunxi_usbc_vbus_disable(int index)
{
struct sunxi_usbc_hcd *sunxi_usbc = &sunxi_usbc_hcd[index];
#ifdef AXP_DRIVEBUS
if (use_axp_drivebus(index))
axp_drivebus_disable();
#endif
if (sunxi_usbc->gpio_vbus != -1)
gpio_direction_output(sunxi_usbc->gpio_vbus, 0);
}