u-boot/arch/arm/include/asm/arch-omap3/sys_proto.h
Lokesh Vutla 702395073f ARM: OMAP3+: Detect reset type
Certain modules are not affected by means of
a warm reset and need not be configured again.
Adding an API to detect the reset reason warm/cold.

This will be used to skip the module configurations
that are retained across a warm reset.

Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
Signed-off-by: R Sricharan <r.sricharan@ti.com>
2012-07-07 14:07:34 +02:00

78 lines
2.2 KiB
C

/*
* (C) Copyright 2004-2008
* Texas Instruments, <www.ti.com>
* Richard Woodruff <r-woodruff2@ti.com>
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License as
* published by the Free Software Foundation; either version 2 of
* the License, or (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR /PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston,
* MA 02111-1307 USA
*/
#ifndef _SYS_PROTO_H_
#define _SYS_PROTO_H_
typedef struct {
u32 mtype;
char *board_string;
char *nand_string;
} omap3_sysinfo;
struct emu_hal_params {
u32 num_params;
u32 param1;
};
void prcm_init(void);
void per_clocks_enable(void);
void ehci_clocks_enable(void);
void memif_init(void);
void sdrc_init(void);
void do_sdrc_init(u32, u32);
void get_board_mem_timings(u32 *mcfg, u32 *ctrla, u32 *ctrlb, u32 *rfr_ctrl,
u32 *mr);
void identify_nand_chip(int *mfr, int *id);
void emif4_init(void);
void gpmc_init(void);
void enable_gpmc_cs_config(const u32 *gpmc_config, struct gpmc_cs *cs, u32 base,
u32 size);
void watchdog_init(void);
void set_muxconf_regs(void);
u32 get_cpu_family(void);
u32 get_cpu_rev(void);
u32 get_sku_id(void);
u32 get_sysboot_value(void);
u32 is_gpmc_muxed(void);
u32 get_gpmc0_type(void);
u32 get_gpmc0_width(void);
u32 is_running_in_sdram(void);
u32 is_running_in_sram(void);
u32 is_running_in_flash(void);
u32 get_device_type(void);
void secureworld_exit(void);
void try_unlock_memory(void);
u32 get_boot_type(void);
void invalidate_dcache(u32);
void sr32(void *, u32, u32, u32);
u32 wait_on_value(u32, u32, void *, u32);
void sdelay(unsigned long);
void make_cs1_contiguous(void);
void omap_nand_switch_ecc(int);
void power_init_r(void);
void dieid_num_r(void);
void do_omap3_emu_romcode_call(u32 service_id, u32 parameters);
void omap3_gp_romcode_call(u32 service_id, u32 parameter);
u32 warm_reset(void);
#endif