mirror of
https://github.com/AsahiLinux/u-boot
synced 2024-11-16 17:58:23 +00:00
07add22cab
K3 J721E: * DMA support. * MMC and ADMA support. * EEPROM support. * J721e High Security EVM support. * USB DT nodes K3 AM654: * Fixed boot due to pmic probe error. * USB support and DT nodes. * ADMA support DRA7xx/AM57xx: * BBAI board support * Clean up of net platform code under board/ti AM33/AM43/Davinci: * Reduce SPL size for omap3 boards. * SPL DT support for da850-lcdk * PLL divider fix for AM335x
1072 lines
31 KiB
C
1072 lines
31 KiB
C
// SPDX-License-Identifier: GPL-2.0+
|
|
/*
|
|
* (C) Copyright 2013
|
|
* Texas Instruments Incorporated, <www.ti.com>
|
|
*
|
|
* Lokesh Vutla <lokeshvutla@ti.com>
|
|
*
|
|
* Based on previous work by:
|
|
* Aneesh V <aneesh@ti.com>
|
|
* Steve Sakoman <steve@sakoman.com>
|
|
*/
|
|
#include <common.h>
|
|
#include <env.h>
|
|
#include <fdt_support.h>
|
|
#include <init.h>
|
|
#include <spl.h>
|
|
#include <palmas.h>
|
|
#include <sata.h>
|
|
#include <serial.h>
|
|
#include <linux/string.h>
|
|
#include <asm/gpio.h>
|
|
#include <usb.h>
|
|
#include <linux/usb/gadget.h>
|
|
#include <asm/omap_common.h>
|
|
#include <asm/omap_sec_common.h>
|
|
#include <asm/arch/gpio.h>
|
|
#include <asm/arch/dra7xx_iodelay.h>
|
|
#include <asm/emif.h>
|
|
#include <asm/arch/sys_proto.h>
|
|
#include <asm/arch/mmc_host_def.h>
|
|
#include <asm/arch/sata.h>
|
|
#include <dwc3-uboot.h>
|
|
#include <dwc3-omap-uboot.h>
|
|
#include <i2c.h>
|
|
#include <ti-usb-phy-uboot.h>
|
|
|
|
#include "mux_data.h"
|
|
#include "../common/board_detect.h"
|
|
|
|
#define board_is_dra76x_evm() board_ti_is("DRA76/7x")
|
|
#define board_is_dra74x_evm() board_ti_is("5777xCPU")
|
|
#define board_is_dra72x_evm() board_ti_is("DRA72x-T")
|
|
#define board_is_dra71x_evm() board_ti_is("DRA79x,D")
|
|
#define board_is_dra74x_revh_or_later() (board_is_dra74x_evm() && \
|
|
(strncmp("H", board_ti_get_rev(), 1) <= 0))
|
|
#define board_is_dra72x_revc_or_later() (board_is_dra72x_evm() && \
|
|
(strncmp("C", board_ti_get_rev(), 1) <= 0))
|
|
#define board_ti_get_emif_size() board_ti_get_emif1_size() + \
|
|
board_ti_get_emif2_size()
|
|
|
|
DECLARE_GLOBAL_DATA_PTR;
|
|
|
|
/* GPIO 7_11 */
|
|
#define GPIO_DDR_VTT_EN 203
|
|
|
|
#define SYSINFO_BOARD_NAME_MAX_LEN 37
|
|
|
|
/* I2C I/O Expander */
|
|
#define NAND_PCF8575_ADDR 0x21
|
|
#define NAND_PCF8575_I2C_BUS_NUM 0
|
|
|
|
const struct omap_sysinfo sysinfo = {
|
|
"Board: UNKNOWN(DRA7 EVM) REV UNKNOWN\n"
|
|
};
|
|
|
|
static const struct emif_regs emif1_ddr3_532_mhz_1cs = {
|
|
.sdram_config_init = 0x61851ab2,
|
|
.sdram_config = 0x61851ab2,
|
|
.sdram_config2 = 0x08000000,
|
|
.ref_ctrl = 0x000040F1,
|
|
.ref_ctrl_final = 0x00001035,
|
|
.sdram_tim1 = 0xCCCF36B3,
|
|
.sdram_tim2 = 0x308F7FDA,
|
|
.sdram_tim3 = 0x427F88A8,
|
|
.read_idle_ctrl = 0x00050000,
|
|
.zq_config = 0x0007190B,
|
|
.temp_alert_config = 0x00000000,
|
|
.emif_ddr_phy_ctlr_1_init = 0x0024400B,
|
|
.emif_ddr_phy_ctlr_1 = 0x0E24400B,
|
|
.emif_ddr_ext_phy_ctrl_1 = 0x10040100,
|
|
.emif_ddr_ext_phy_ctrl_2 = 0x00910091,
|
|
.emif_ddr_ext_phy_ctrl_3 = 0x00950095,
|
|
.emif_ddr_ext_phy_ctrl_4 = 0x009B009B,
|
|
.emif_ddr_ext_phy_ctrl_5 = 0x009E009E,
|
|
.emif_rd_wr_lvl_rmp_win = 0x00000000,
|
|
.emif_rd_wr_lvl_rmp_ctl = 0x80000000,
|
|
.emif_rd_wr_lvl_ctl = 0x00000000,
|
|
.emif_rd_wr_exec_thresh = 0x00000305
|
|
};
|
|
|
|
static const struct emif_regs emif2_ddr3_532_mhz_1cs = {
|
|
.sdram_config_init = 0x61851B32,
|
|
.sdram_config = 0x61851B32,
|
|
.sdram_config2 = 0x08000000,
|
|
.ref_ctrl = 0x000040F1,
|
|
.ref_ctrl_final = 0x00001035,
|
|
.sdram_tim1 = 0xCCCF36B3,
|
|
.sdram_tim2 = 0x308F7FDA,
|
|
.sdram_tim3 = 0x427F88A8,
|
|
.read_idle_ctrl = 0x00050000,
|
|
.zq_config = 0x0007190B,
|
|
.temp_alert_config = 0x00000000,
|
|
.emif_ddr_phy_ctlr_1_init = 0x0024400B,
|
|
.emif_ddr_phy_ctlr_1 = 0x0E24400B,
|
|
.emif_ddr_ext_phy_ctrl_1 = 0x10040100,
|
|
.emif_ddr_ext_phy_ctrl_2 = 0x00910091,
|
|
.emif_ddr_ext_phy_ctrl_3 = 0x00950095,
|
|
.emif_ddr_ext_phy_ctrl_4 = 0x009B009B,
|
|
.emif_ddr_ext_phy_ctrl_5 = 0x009E009E,
|
|
.emif_rd_wr_lvl_rmp_win = 0x00000000,
|
|
.emif_rd_wr_lvl_rmp_ctl = 0x80000000,
|
|
.emif_rd_wr_lvl_ctl = 0x00000000,
|
|
.emif_rd_wr_exec_thresh = 0x00000305
|
|
};
|
|
|
|
static const struct emif_regs emif_1_regs_ddr3_666_mhz_1cs_dra_es1 = {
|
|
.sdram_config_init = 0x61862B32,
|
|
.sdram_config = 0x61862B32,
|
|
.sdram_config2 = 0x08000000,
|
|
.ref_ctrl = 0x0000514C,
|
|
.ref_ctrl_final = 0x0000144A,
|
|
.sdram_tim1 = 0xD113781C,
|
|
.sdram_tim2 = 0x30717FE3,
|
|
.sdram_tim3 = 0x409F86A8,
|
|
.read_idle_ctrl = 0x00050000,
|
|
.zq_config = 0x5007190B,
|
|
.temp_alert_config = 0x00000000,
|
|
.emif_ddr_phy_ctlr_1_init = 0x0024400D,
|
|
.emif_ddr_phy_ctlr_1 = 0x0E24400D,
|
|
.emif_ddr_ext_phy_ctrl_1 = 0x10040100,
|
|
.emif_ddr_ext_phy_ctrl_2 = 0x00A400A4,
|
|
.emif_ddr_ext_phy_ctrl_3 = 0x00A900A9,
|
|
.emif_ddr_ext_phy_ctrl_4 = 0x00B000B0,
|
|
.emif_ddr_ext_phy_ctrl_5 = 0x00B000B0,
|
|
.emif_rd_wr_lvl_rmp_win = 0x00000000,
|
|
.emif_rd_wr_lvl_rmp_ctl = 0x80000000,
|
|
.emif_rd_wr_lvl_ctl = 0x00000000,
|
|
.emif_rd_wr_exec_thresh = 0x00000305
|
|
};
|
|
|
|
const struct emif_regs emif_1_regs_ddr3_666_mhz_1cs_dra_es2 = {
|
|
.sdram_config_init = 0x61862BB2,
|
|
.sdram_config = 0x61862BB2,
|
|
.sdram_config2 = 0x00000000,
|
|
.ref_ctrl = 0x0000514D,
|
|
.ref_ctrl_final = 0x0000144A,
|
|
.sdram_tim1 = 0xD1137824,
|
|
.sdram_tim2 = 0x30B37FE3,
|
|
.sdram_tim3 = 0x409F8AD8,
|
|
.read_idle_ctrl = 0x00050000,
|
|
.zq_config = 0x5007190B,
|
|
.temp_alert_config = 0x00000000,
|
|
.emif_ddr_phy_ctlr_1_init = 0x0824400E,
|
|
.emif_ddr_phy_ctlr_1 = 0x0E24400E,
|
|
.emif_ddr_ext_phy_ctrl_1 = 0x04040100,
|
|
.emif_ddr_ext_phy_ctrl_2 = 0x006B009F,
|
|
.emif_ddr_ext_phy_ctrl_3 = 0x006B00A2,
|
|
.emif_ddr_ext_phy_ctrl_4 = 0x006B00A8,
|
|
.emif_ddr_ext_phy_ctrl_5 = 0x006B00A8,
|
|
.emif_rd_wr_lvl_rmp_win = 0x00000000,
|
|
.emif_rd_wr_lvl_rmp_ctl = 0x80000000,
|
|
.emif_rd_wr_lvl_ctl = 0x00000000,
|
|
.emif_rd_wr_exec_thresh = 0x00000305
|
|
};
|
|
|
|
const struct emif_regs emif1_ddr3_532_mhz_1cs_2G = {
|
|
.sdram_config_init = 0x61851ab2,
|
|
.sdram_config = 0x61851ab2,
|
|
.sdram_config2 = 0x08000000,
|
|
.ref_ctrl = 0x000040F1,
|
|
.ref_ctrl_final = 0x00001035,
|
|
.sdram_tim1 = 0xCCCF36B3,
|
|
.sdram_tim2 = 0x30BF7FDA,
|
|
.sdram_tim3 = 0x427F8BA8,
|
|
.read_idle_ctrl = 0x00050000,
|
|
.zq_config = 0x0007190B,
|
|
.temp_alert_config = 0x00000000,
|
|
.emif_ddr_phy_ctlr_1_init = 0x0024400B,
|
|
.emif_ddr_phy_ctlr_1 = 0x0E24400B,
|
|
.emif_ddr_ext_phy_ctrl_1 = 0x10040100,
|
|
.emif_ddr_ext_phy_ctrl_2 = 0x00910091,
|
|
.emif_ddr_ext_phy_ctrl_3 = 0x00950095,
|
|
.emif_ddr_ext_phy_ctrl_4 = 0x009B009B,
|
|
.emif_ddr_ext_phy_ctrl_5 = 0x009E009E,
|
|
.emif_rd_wr_lvl_rmp_win = 0x00000000,
|
|
.emif_rd_wr_lvl_rmp_ctl = 0x80000000,
|
|
.emif_rd_wr_lvl_ctl = 0x00000000,
|
|
.emif_rd_wr_exec_thresh = 0x00000305
|
|
};
|
|
|
|
const struct emif_regs emif2_ddr3_532_mhz_1cs_2G = {
|
|
.sdram_config_init = 0x61851B32,
|
|
.sdram_config = 0x61851B32,
|
|
.sdram_config2 = 0x08000000,
|
|
.ref_ctrl = 0x000040F1,
|
|
.ref_ctrl_final = 0x00001035,
|
|
.sdram_tim1 = 0xCCCF36B3,
|
|
.sdram_tim2 = 0x308F7FDA,
|
|
.sdram_tim3 = 0x427F88A8,
|
|
.read_idle_ctrl = 0x00050000,
|
|
.zq_config = 0x0007190B,
|
|
.temp_alert_config = 0x00000000,
|
|
.emif_ddr_phy_ctlr_1_init = 0x0024400B,
|
|
.emif_ddr_phy_ctlr_1 = 0x0E24400B,
|
|
.emif_ddr_ext_phy_ctrl_1 = 0x10040100,
|
|
.emif_ddr_ext_phy_ctrl_2 = 0x00910091,
|
|
.emif_ddr_ext_phy_ctrl_3 = 0x00950095,
|
|
.emif_ddr_ext_phy_ctrl_4 = 0x009B009B,
|
|
.emif_ddr_ext_phy_ctrl_5 = 0x009E009E,
|
|
.emif_rd_wr_lvl_rmp_win = 0x00000000,
|
|
.emif_rd_wr_lvl_rmp_ctl = 0x80000000,
|
|
.emif_rd_wr_lvl_ctl = 0x00000000,
|
|
.emif_rd_wr_exec_thresh = 0x00000305
|
|
};
|
|
|
|
const struct emif_regs emif_1_regs_ddr3_666_mhz_1cs_dra76 = {
|
|
.sdram_config_init = 0x61862B32,
|
|
.sdram_config = 0x61862B32,
|
|
.sdram_config2 = 0x00000000,
|
|
.ref_ctrl = 0x0000514C,
|
|
.ref_ctrl_final = 0x0000144A,
|
|
.sdram_tim1 = 0xD113783C,
|
|
.sdram_tim2 = 0x30B47FE3,
|
|
.sdram_tim3 = 0x409F8AD8,
|
|
.read_idle_ctrl = 0x00050000,
|
|
.zq_config = 0x5007190B,
|
|
.temp_alert_config = 0x00000000,
|
|
.emif_ddr_phy_ctlr_1_init = 0x0824400D,
|
|
.emif_ddr_phy_ctlr_1 = 0x0E24400D,
|
|
.emif_ddr_ext_phy_ctrl_1 = 0x04040100,
|
|
.emif_ddr_ext_phy_ctrl_2 = 0x006B009F,
|
|
.emif_ddr_ext_phy_ctrl_3 = 0x006B00A2,
|
|
.emif_ddr_ext_phy_ctrl_4 = 0x006B00A8,
|
|
.emif_ddr_ext_phy_ctrl_5 = 0x006B00A8,
|
|
.emif_rd_wr_lvl_rmp_win = 0x00000000,
|
|
.emif_rd_wr_lvl_rmp_ctl = 0x80000000,
|
|
.emif_rd_wr_lvl_ctl = 0x00000000,
|
|
.emif_rd_wr_exec_thresh = 0x00000305
|
|
};
|
|
|
|
const struct emif_regs emif_2_regs_ddr3_666_mhz_1cs_dra76 = {
|
|
.sdram_config_init = 0x61862B32,
|
|
.sdram_config = 0x61862B32,
|
|
.sdram_config2 = 0x00000000,
|
|
.ref_ctrl = 0x0000514C,
|
|
.ref_ctrl_final = 0x0000144A,
|
|
.sdram_tim1 = 0xD113781C,
|
|
.sdram_tim2 = 0x30B47FE3,
|
|
.sdram_tim3 = 0x409F8AD8,
|
|
.read_idle_ctrl = 0x00050000,
|
|
.zq_config = 0x5007190B,
|
|
.temp_alert_config = 0x00000000,
|
|
.emif_ddr_phy_ctlr_1_init = 0x0824400D,
|
|
.emif_ddr_phy_ctlr_1 = 0x0E24400D,
|
|
.emif_ddr_ext_phy_ctrl_1 = 0x04040100,
|
|
.emif_ddr_ext_phy_ctrl_2 = 0x006B009F,
|
|
.emif_ddr_ext_phy_ctrl_3 = 0x006B00A2,
|
|
.emif_ddr_ext_phy_ctrl_4 = 0x006B00A8,
|
|
.emif_ddr_ext_phy_ctrl_5 = 0x006B00A8,
|
|
.emif_rd_wr_lvl_rmp_win = 0x00000000,
|
|
.emif_rd_wr_lvl_rmp_ctl = 0x80000000,
|
|
.emif_rd_wr_lvl_ctl = 0x00000000,
|
|
.emif_rd_wr_exec_thresh = 0x00000305
|
|
};
|
|
|
|
void emif_get_reg_dump(u32 emif_nr, const struct emif_regs **regs)
|
|
{
|
|
u64 ram_size;
|
|
|
|
ram_size = board_ti_get_emif_size();
|
|
|
|
switch (omap_revision()) {
|
|
case DRA752_ES1_0:
|
|
case DRA752_ES1_1:
|
|
case DRA752_ES2_0:
|
|
switch (emif_nr) {
|
|
case 1:
|
|
if (ram_size > CONFIG_MAX_MEM_MAPPED)
|
|
*regs = &emif1_ddr3_532_mhz_1cs_2G;
|
|
else
|
|
*regs = &emif1_ddr3_532_mhz_1cs;
|
|
break;
|
|
case 2:
|
|
if (ram_size > CONFIG_MAX_MEM_MAPPED)
|
|
*regs = &emif2_ddr3_532_mhz_1cs_2G;
|
|
else
|
|
*regs = &emif2_ddr3_532_mhz_1cs;
|
|
break;
|
|
}
|
|
break;
|
|
case DRA762_ABZ_ES1_0:
|
|
case DRA762_ACD_ES1_0:
|
|
case DRA762_ES1_0:
|
|
if (emif_nr == 1)
|
|
*regs = &emif_1_regs_ddr3_666_mhz_1cs_dra76;
|
|
else
|
|
*regs = &emif_2_regs_ddr3_666_mhz_1cs_dra76;
|
|
break;
|
|
case DRA722_ES1_0:
|
|
case DRA722_ES2_0:
|
|
case DRA722_ES2_1:
|
|
if (ram_size < CONFIG_MAX_MEM_MAPPED)
|
|
*regs = &emif_1_regs_ddr3_666_mhz_1cs_dra_es1;
|
|
else
|
|
*regs = &emif_1_regs_ddr3_666_mhz_1cs_dra_es2;
|
|
break;
|
|
default:
|
|
*regs = &emif1_ddr3_532_mhz_1cs;
|
|
}
|
|
}
|
|
|
|
static const struct dmm_lisa_map_regs lisa_map_dra7_1536MB = {
|
|
.dmm_lisa_map_0 = 0x0,
|
|
.dmm_lisa_map_1 = 0x80640300,
|
|
.dmm_lisa_map_2 = 0xC0500220,
|
|
.dmm_lisa_map_3 = 0xFF020100,
|
|
.is_ma_present = 0x1
|
|
};
|
|
|
|
static const struct dmm_lisa_map_regs lisa_map_2G_x_2 = {
|
|
.dmm_lisa_map_0 = 0x0,
|
|
.dmm_lisa_map_1 = 0x0,
|
|
.dmm_lisa_map_2 = 0x80600100,
|
|
.dmm_lisa_map_3 = 0xFF020100,
|
|
.is_ma_present = 0x1
|
|
};
|
|
|
|
const struct dmm_lisa_map_regs lisa_map_dra7_2GB = {
|
|
.dmm_lisa_map_0 = 0x0,
|
|
.dmm_lisa_map_1 = 0x0,
|
|
.dmm_lisa_map_2 = 0x80740300,
|
|
.dmm_lisa_map_3 = 0xFF020100,
|
|
.is_ma_present = 0x1
|
|
};
|
|
|
|
/*
|
|
* DRA722 EVM EMIF1 2GB CONFIGURATION
|
|
* EMIF1 4 devices of 512Mb x 8 Micron
|
|
*/
|
|
const struct dmm_lisa_map_regs lisa_map_2G_x_4 = {
|
|
.dmm_lisa_map_0 = 0x0,
|
|
.dmm_lisa_map_1 = 0x0,
|
|
.dmm_lisa_map_2 = 0x80700100,
|
|
.dmm_lisa_map_3 = 0xFF020100,
|
|
.is_ma_present = 0x1
|
|
};
|
|
|
|
void emif_get_dmm_regs(const struct dmm_lisa_map_regs **dmm_lisa_regs)
|
|
{
|
|
u64 ram_size;
|
|
|
|
ram_size = board_ti_get_emif_size();
|
|
|
|
switch (omap_revision()) {
|
|
case DRA762_ABZ_ES1_0:
|
|
case DRA762_ACD_ES1_0:
|
|
case DRA762_ES1_0:
|
|
case DRA752_ES1_0:
|
|
case DRA752_ES1_1:
|
|
case DRA752_ES2_0:
|
|
if (ram_size > CONFIG_MAX_MEM_MAPPED)
|
|
*dmm_lisa_regs = &lisa_map_dra7_2GB;
|
|
else
|
|
*dmm_lisa_regs = &lisa_map_dra7_1536MB;
|
|
break;
|
|
case DRA722_ES1_0:
|
|
case DRA722_ES2_0:
|
|
case DRA722_ES2_1:
|
|
default:
|
|
if (ram_size < CONFIG_MAX_MEM_MAPPED)
|
|
*dmm_lisa_regs = &lisa_map_2G_x_2;
|
|
else
|
|
*dmm_lisa_regs = &lisa_map_2G_x_4;
|
|
break;
|
|
}
|
|
}
|
|
|
|
struct vcores_data dra752_volts = {
|
|
.mpu.value[OPP_NOM] = VDD_MPU_DRA7_NOM,
|
|
.mpu.efuse.reg[OPP_NOM] = STD_FUSE_OPP_VMIN_MPU_NOM,
|
|
.mpu.efuse.reg_bits = DRA752_EFUSE_REGBITS,
|
|
.mpu.addr = TPS659038_REG_ADDR_SMPS12,
|
|
.mpu.pmic = &tps659038,
|
|
.mpu.abb_tx_done_mask = OMAP_ABB_MPU_TXDONE_MASK,
|
|
|
|
.eve.value[OPP_NOM] = VDD_EVE_DRA7_NOM,
|
|
.eve.value[OPP_OD] = VDD_EVE_DRA7_OD,
|
|
.eve.value[OPP_HIGH] = VDD_EVE_DRA7_HIGH,
|
|
.eve.efuse.reg[OPP_NOM] = STD_FUSE_OPP_VMIN_DSPEVE_NOM,
|
|
.eve.efuse.reg[OPP_OD] = STD_FUSE_OPP_VMIN_DSPEVE_OD,
|
|
.eve.efuse.reg[OPP_HIGH] = STD_FUSE_OPP_VMIN_DSPEVE_HIGH,
|
|
.eve.efuse.reg_bits = DRA752_EFUSE_REGBITS,
|
|
.eve.addr = TPS659038_REG_ADDR_SMPS45,
|
|
.eve.pmic = &tps659038,
|
|
.eve.abb_tx_done_mask = OMAP_ABB_EVE_TXDONE_MASK,
|
|
|
|
.gpu.value[OPP_NOM] = VDD_GPU_DRA7_NOM,
|
|
.gpu.value[OPP_OD] = VDD_GPU_DRA7_OD,
|
|
.gpu.value[OPP_HIGH] = VDD_GPU_DRA7_HIGH,
|
|
.gpu.efuse.reg[OPP_NOM] = STD_FUSE_OPP_VMIN_GPU_NOM,
|
|
.gpu.efuse.reg[OPP_OD] = STD_FUSE_OPP_VMIN_GPU_OD,
|
|
.gpu.efuse.reg[OPP_HIGH] = STD_FUSE_OPP_VMIN_GPU_HIGH,
|
|
.gpu.efuse.reg_bits = DRA752_EFUSE_REGBITS,
|
|
.gpu.addr = TPS659038_REG_ADDR_SMPS6,
|
|
.gpu.pmic = &tps659038,
|
|
.gpu.abb_tx_done_mask = OMAP_ABB_GPU_TXDONE_MASK,
|
|
|
|
.core.value[OPP_NOM] = VDD_CORE_DRA7_NOM,
|
|
.core.efuse.reg[OPP_NOM] = STD_FUSE_OPP_VMIN_CORE_NOM,
|
|
.core.efuse.reg_bits = DRA752_EFUSE_REGBITS,
|
|
.core.addr = TPS659038_REG_ADDR_SMPS7,
|
|
.core.pmic = &tps659038,
|
|
|
|
.iva.value[OPP_NOM] = VDD_IVA_DRA7_NOM,
|
|
.iva.value[OPP_OD] = VDD_IVA_DRA7_OD,
|
|
.iva.value[OPP_HIGH] = VDD_IVA_DRA7_HIGH,
|
|
.iva.efuse.reg[OPP_NOM] = STD_FUSE_OPP_VMIN_IVA_NOM,
|
|
.iva.efuse.reg[OPP_OD] = STD_FUSE_OPP_VMIN_IVA_OD,
|
|
.iva.efuse.reg[OPP_HIGH] = STD_FUSE_OPP_VMIN_IVA_HIGH,
|
|
.iva.efuse.reg_bits = DRA752_EFUSE_REGBITS,
|
|
.iva.addr = TPS659038_REG_ADDR_SMPS8,
|
|
.iva.pmic = &tps659038,
|
|
.iva.abb_tx_done_mask = OMAP_ABB_IVA_TXDONE_MASK,
|
|
};
|
|
|
|
struct vcores_data dra76x_volts = {
|
|
.mpu.value[OPP_NOM] = VDD_MPU_DRA7_NOM,
|
|
.mpu.efuse.reg[OPP_NOM] = STD_FUSE_OPP_VMIN_MPU_NOM,
|
|
.mpu.efuse.reg_bits = DRA752_EFUSE_REGBITS,
|
|
.mpu.addr = LP87565_REG_ADDR_BUCK01,
|
|
.mpu.pmic = &lp87565,
|
|
.mpu.abb_tx_done_mask = OMAP_ABB_MPU_TXDONE_MASK,
|
|
|
|
.eve.value[OPP_NOM] = VDD_EVE_DRA7_NOM,
|
|
.eve.value[OPP_OD] = VDD_EVE_DRA7_OD,
|
|
.eve.value[OPP_HIGH] = VDD_EVE_DRA7_HIGH,
|
|
.eve.efuse.reg[OPP_NOM] = STD_FUSE_OPP_VMIN_DSPEVE_NOM,
|
|
.eve.efuse.reg[OPP_OD] = STD_FUSE_OPP_VMIN_DSPEVE_OD,
|
|
.eve.efuse.reg[OPP_HIGH] = STD_FUSE_OPP_VMIN_DSPEVE_HIGH,
|
|
.eve.efuse.reg_bits = DRA752_EFUSE_REGBITS,
|
|
.eve.addr = TPS65917_REG_ADDR_SMPS1,
|
|
.eve.pmic = &tps659038,
|
|
.eve.abb_tx_done_mask = OMAP_ABB_EVE_TXDONE_MASK,
|
|
|
|
.gpu.value[OPP_NOM] = VDD_GPU_DRA7_NOM,
|
|
.gpu.value[OPP_OD] = VDD_GPU_DRA7_OD,
|
|
.gpu.value[OPP_HIGH] = VDD_GPU_DRA7_HIGH,
|
|
.gpu.efuse.reg[OPP_NOM] = STD_FUSE_OPP_VMIN_GPU_NOM,
|
|
.gpu.efuse.reg[OPP_OD] = STD_FUSE_OPP_VMIN_GPU_OD,
|
|
.gpu.efuse.reg[OPP_HIGH] = STD_FUSE_OPP_VMIN_GPU_HIGH,
|
|
.gpu.efuse.reg_bits = DRA752_EFUSE_REGBITS,
|
|
.gpu.addr = LP87565_REG_ADDR_BUCK23,
|
|
.gpu.pmic = &lp87565,
|
|
.gpu.abb_tx_done_mask = OMAP_ABB_GPU_TXDONE_MASK,
|
|
|
|
.core.value[OPP_NOM] = VDD_CORE_DRA7_NOM,
|
|
.core.efuse.reg[OPP_NOM] = STD_FUSE_OPP_VMIN_CORE_NOM,
|
|
.core.efuse.reg_bits = DRA752_EFUSE_REGBITS,
|
|
.core.addr = TPS65917_REG_ADDR_SMPS3,
|
|
.core.pmic = &tps659038,
|
|
|
|
.iva.value[OPP_NOM] = VDD_IVA_DRA7_NOM,
|
|
.iva.value[OPP_OD] = VDD_IVA_DRA7_OD,
|
|
.iva.value[OPP_HIGH] = VDD_IVA_DRA7_HIGH,
|
|
.iva.efuse.reg[OPP_NOM] = STD_FUSE_OPP_VMIN_IVA_NOM,
|
|
.iva.efuse.reg[OPP_OD] = STD_FUSE_OPP_VMIN_IVA_OD,
|
|
.iva.efuse.reg[OPP_HIGH] = STD_FUSE_OPP_VMIN_IVA_HIGH,
|
|
.iva.efuse.reg_bits = DRA752_EFUSE_REGBITS,
|
|
.iva.addr = TPS65917_REG_ADDR_SMPS4,
|
|
.iva.pmic = &tps659038,
|
|
.iva.abb_tx_done_mask = OMAP_ABB_IVA_TXDONE_MASK,
|
|
};
|
|
|
|
struct vcores_data dra722_volts = {
|
|
.mpu.value[OPP_NOM] = VDD_MPU_DRA7_NOM,
|
|
.mpu.efuse.reg[OPP_NOM] = STD_FUSE_OPP_VMIN_MPU_NOM,
|
|
.mpu.efuse.reg_bits = DRA752_EFUSE_REGBITS,
|
|
.mpu.addr = TPS65917_REG_ADDR_SMPS1,
|
|
.mpu.pmic = &tps659038,
|
|
.mpu.abb_tx_done_mask = OMAP_ABB_MPU_TXDONE_MASK,
|
|
|
|
.core.value[OPP_NOM] = VDD_CORE_DRA7_NOM,
|
|
.core.efuse.reg[OPP_NOM] = STD_FUSE_OPP_VMIN_CORE_NOM,
|
|
.core.efuse.reg_bits = DRA752_EFUSE_REGBITS,
|
|
.core.addr = TPS65917_REG_ADDR_SMPS2,
|
|
.core.pmic = &tps659038,
|
|
|
|
/*
|
|
* The DSPEVE, GPU and IVA rails are usually grouped on DRA72x
|
|
* designs and powered by TPS65917 SMPS3, as on the J6Eco EVM.
|
|
*/
|
|
.gpu.value[OPP_NOM] = VDD_GPU_DRA7_NOM,
|
|
.gpu.value[OPP_OD] = VDD_GPU_DRA7_OD,
|
|
.gpu.value[OPP_HIGH] = VDD_GPU_DRA7_HIGH,
|
|
.gpu.efuse.reg[OPP_NOM] = STD_FUSE_OPP_VMIN_GPU_NOM,
|
|
.gpu.efuse.reg[OPP_OD] = STD_FUSE_OPP_VMIN_GPU_OD,
|
|
.gpu.efuse.reg[OPP_HIGH] = STD_FUSE_OPP_VMIN_GPU_HIGH,
|
|
.gpu.efuse.reg_bits = DRA752_EFUSE_REGBITS,
|
|
.gpu.addr = TPS65917_REG_ADDR_SMPS3,
|
|
.gpu.pmic = &tps659038,
|
|
.gpu.abb_tx_done_mask = OMAP_ABB_GPU_TXDONE_MASK,
|
|
|
|
.eve.value[OPP_NOM] = VDD_EVE_DRA7_NOM,
|
|
.eve.value[OPP_OD] = VDD_EVE_DRA7_OD,
|
|
.eve.value[OPP_HIGH] = VDD_EVE_DRA7_HIGH,
|
|
.eve.efuse.reg[OPP_NOM] = STD_FUSE_OPP_VMIN_DSPEVE_NOM,
|
|
.eve.efuse.reg[OPP_OD] = STD_FUSE_OPP_VMIN_DSPEVE_OD,
|
|
.eve.efuse.reg[OPP_HIGH] = STD_FUSE_OPP_VMIN_DSPEVE_HIGH,
|
|
.eve.efuse.reg_bits = DRA752_EFUSE_REGBITS,
|
|
.eve.addr = TPS65917_REG_ADDR_SMPS3,
|
|
.eve.pmic = &tps659038,
|
|
.eve.abb_tx_done_mask = OMAP_ABB_EVE_TXDONE_MASK,
|
|
|
|
.iva.value[OPP_NOM] = VDD_IVA_DRA7_NOM,
|
|
.iva.value[OPP_OD] = VDD_IVA_DRA7_OD,
|
|
.iva.value[OPP_HIGH] = VDD_IVA_DRA7_HIGH,
|
|
.iva.efuse.reg[OPP_NOM] = STD_FUSE_OPP_VMIN_IVA_NOM,
|
|
.iva.efuse.reg[OPP_OD] = STD_FUSE_OPP_VMIN_IVA_OD,
|
|
.iva.efuse.reg[OPP_HIGH] = STD_FUSE_OPP_VMIN_IVA_HIGH,
|
|
.iva.efuse.reg_bits = DRA752_EFUSE_REGBITS,
|
|
.iva.addr = TPS65917_REG_ADDR_SMPS3,
|
|
.iva.pmic = &tps659038,
|
|
.iva.abb_tx_done_mask = OMAP_ABB_IVA_TXDONE_MASK,
|
|
};
|
|
|
|
struct vcores_data dra718_volts = {
|
|
/*
|
|
* In the case of dra71x GPU MPU and CORE
|
|
* are all powered up by BUCK0 of LP873X PMIC
|
|
*/
|
|
.mpu.value[OPP_NOM] = VDD_MPU_DRA7_NOM,
|
|
.mpu.efuse.reg[OPP_NOM] = STD_FUSE_OPP_VMIN_MPU_NOM,
|
|
.mpu.efuse.reg_bits = DRA752_EFUSE_REGBITS,
|
|
.mpu.addr = LP873X_REG_ADDR_BUCK0,
|
|
.mpu.pmic = &lp8733,
|
|
.mpu.abb_tx_done_mask = OMAP_ABB_MPU_TXDONE_MASK,
|
|
|
|
.core.value[OPP_NOM] = VDD_CORE_DRA7_NOM,
|
|
.core.efuse.reg[OPP_NOM] = STD_FUSE_OPP_VMIN_CORE_NOM,
|
|
.core.efuse.reg_bits = DRA752_EFUSE_REGBITS,
|
|
.core.addr = LP873X_REG_ADDR_BUCK0,
|
|
.core.pmic = &lp8733,
|
|
|
|
.gpu.value[OPP_NOM] = VDD_GPU_DRA7_NOM,
|
|
.gpu.efuse.reg[OPP_NOM] = STD_FUSE_OPP_VMIN_GPU_NOM,
|
|
.gpu.efuse.reg_bits = DRA752_EFUSE_REGBITS,
|
|
.gpu.addr = LP873X_REG_ADDR_BUCK0,
|
|
.gpu.pmic = &lp8733,
|
|
.gpu.abb_tx_done_mask = OMAP_ABB_GPU_TXDONE_MASK,
|
|
|
|
/*
|
|
* The DSPEVE and IVA rails are grouped on DRA71x-evm
|
|
* and are powered by BUCK1 of LP873X PMIC
|
|
*/
|
|
.eve.value[OPP_NOM] = VDD_EVE_DRA7_NOM,
|
|
.eve.value[OPP_HIGH] = VDD_EVE_DRA7_HIGH,
|
|
.eve.efuse.reg[OPP_NOM] = STD_FUSE_OPP_VMIN_DSPEVE_NOM,
|
|
.eve.efuse.reg[OPP_HIGH] = STD_FUSE_OPP_VMIN_DSPEVE_HIGH,
|
|
.eve.efuse.reg_bits = DRA752_EFUSE_REGBITS,
|
|
.eve.addr = LP873X_REG_ADDR_BUCK1,
|
|
.eve.pmic = &lp8733,
|
|
.eve.abb_tx_done_mask = OMAP_ABB_EVE_TXDONE_MASK,
|
|
|
|
.iva.value[OPP_NOM] = VDD_IVA_DRA7_NOM,
|
|
.iva.value[OPP_HIGH] = VDD_IVA_DRA7_HIGH,
|
|
.iva.efuse.reg[OPP_NOM] = STD_FUSE_OPP_VMIN_IVA_NOM,
|
|
.iva.efuse.reg[OPP_HIGH] = STD_FUSE_OPP_VMIN_IVA_HIGH,
|
|
.iva.efuse.reg_bits = DRA752_EFUSE_REGBITS,
|
|
.iva.addr = LP873X_REG_ADDR_BUCK1,
|
|
.iva.pmic = &lp8733,
|
|
.iva.abb_tx_done_mask = OMAP_ABB_IVA_TXDONE_MASK,
|
|
};
|
|
|
|
int get_voltrail_opp(int rail_offset)
|
|
{
|
|
int opp;
|
|
|
|
switch (rail_offset) {
|
|
case VOLT_MPU:
|
|
opp = DRA7_MPU_OPP;
|
|
/* DRA71x supports only OPP_NOM for MPU */
|
|
if (board_is_dra71x_evm())
|
|
opp = OPP_NOM;
|
|
break;
|
|
case VOLT_CORE:
|
|
opp = DRA7_CORE_OPP;
|
|
/* DRA71x supports only OPP_NOM for CORE */
|
|
if (board_is_dra71x_evm())
|
|
opp = OPP_NOM;
|
|
break;
|
|
case VOLT_GPU:
|
|
opp = DRA7_GPU_OPP;
|
|
/* DRA71x supports only OPP_NOM for GPU */
|
|
if (board_is_dra71x_evm())
|
|
opp = OPP_NOM;
|
|
break;
|
|
case VOLT_EVE:
|
|
opp = DRA7_DSPEVE_OPP;
|
|
/*
|
|
* DRA71x does not support OPP_OD for EVE.
|
|
* If OPP_OD is selected by menuconfig, fallback
|
|
* to OPP_NOM.
|
|
*/
|
|
if (board_is_dra71x_evm() && opp == OPP_OD)
|
|
opp = OPP_NOM;
|
|
break;
|
|
case VOLT_IVA:
|
|
opp = DRA7_IVA_OPP;
|
|
/*
|
|
* DRA71x does not support OPP_OD for IVA.
|
|
* If OPP_OD is selected by menuconfig, fallback
|
|
* to OPP_NOM.
|
|
*/
|
|
if (board_is_dra71x_evm() && opp == OPP_OD)
|
|
opp = OPP_NOM;
|
|
break;
|
|
default:
|
|
opp = OPP_NOM;
|
|
}
|
|
|
|
return opp;
|
|
}
|
|
|
|
/**
|
|
* @brief board_init
|
|
*
|
|
* @return 0
|
|
*/
|
|
int board_init(void)
|
|
{
|
|
gpmc_init();
|
|
gd->bd->bi_boot_params = (0x80000000 + 0x100); /* boot param addr */
|
|
|
|
return 0;
|
|
}
|
|
|
|
int dram_init_banksize(void)
|
|
{
|
|
u64 ram_size;
|
|
|
|
ram_size = board_ti_get_emif_size();
|
|
|
|
gd->bd->bi_dram[0].start = CONFIG_SYS_SDRAM_BASE;
|
|
gd->bd->bi_dram[0].size = get_effective_memsize();
|
|
if (ram_size > CONFIG_MAX_MEM_MAPPED) {
|
|
gd->bd->bi_dram[1].start = 0x200000000;
|
|
gd->bd->bi_dram[1].size = ram_size - CONFIG_MAX_MEM_MAPPED;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
#if CONFIG_IS_ENABLED(DM_USB) && CONFIG_IS_ENABLED(OF_CONTROL)
|
|
static int device_okay(const char *path)
|
|
{
|
|
int node;
|
|
|
|
node = fdt_path_offset(gd->fdt_blob, path);
|
|
if (node < 0)
|
|
return 0;
|
|
|
|
return fdtdec_get_is_enabled(gd->fdt_blob, node);
|
|
}
|
|
#endif
|
|
|
|
int board_late_init(void)
|
|
{
|
|
#ifdef CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG
|
|
char *name = "unknown";
|
|
|
|
if (is_dra72x()) {
|
|
if (board_is_dra72x_revc_or_later())
|
|
name = "dra72x-revc";
|
|
else if (board_is_dra71x_evm())
|
|
name = "dra71x";
|
|
else
|
|
name = "dra72x";
|
|
} else if (is_dra76x_abz()) {
|
|
name = "dra76x_abz";
|
|
} else if (is_dra76x_acd()) {
|
|
name = "dra76x_acd";
|
|
} else {
|
|
name = "dra7xx";
|
|
}
|
|
|
|
set_board_info_env(name);
|
|
|
|
/*
|
|
* Default FIT boot on HS devices. Non FIT images are not allowed
|
|
* on HS devices.
|
|
*/
|
|
if (get_device_type() == HS_DEVICE)
|
|
env_set("boot_fit", "1");
|
|
|
|
omap_die_id_serial();
|
|
omap_set_fastboot_vars();
|
|
|
|
/*
|
|
* Hook the LDO1 regulator to EN pin. This applies only to LP8733
|
|
* Rest all regulators are hooked to EN Pin at reset.
|
|
*/
|
|
if (board_is_dra71x_evm())
|
|
palmas_i2c_write_u8(LP873X_I2C_SLAVE_ADDR, 0x9, 0x7);
|
|
#endif
|
|
#if CONFIG_IS_ENABLED(DM_USB) && CONFIG_IS_ENABLED(OF_CONTROL)
|
|
if (device_okay("/ocp/omap_dwc3_1@48880000"))
|
|
enable_usb_clocks(0);
|
|
if (device_okay("/ocp/omap_dwc3_2@488c0000"))
|
|
enable_usb_clocks(1);
|
|
#endif
|
|
return 0;
|
|
}
|
|
|
|
#ifdef CONFIG_SPL_BUILD
|
|
void do_board_detect(void)
|
|
{
|
|
int rc;
|
|
|
|
rc = ti_i2c_eeprom_dra7_get(CONFIG_EEPROM_BUS_ADDRESS,
|
|
CONFIG_EEPROM_CHIP_ADDRESS);
|
|
if (rc)
|
|
printf("ti_i2c_eeprom_init failed %d\n", rc);
|
|
}
|
|
|
|
#else
|
|
|
|
void do_board_detect(void)
|
|
{
|
|
char *bname = NULL;
|
|
int rc;
|
|
|
|
rc = ti_i2c_eeprom_dra7_get(CONFIG_EEPROM_BUS_ADDRESS,
|
|
CONFIG_EEPROM_CHIP_ADDRESS);
|
|
if (rc)
|
|
printf("ti_i2c_eeprom_init failed %d\n", rc);
|
|
|
|
if (board_is_dra74x_evm()) {
|
|
bname = "DRA74x EVM";
|
|
} else if (board_is_dra72x_evm()) {
|
|
bname = "DRA72x EVM";
|
|
} else if (board_is_dra71x_evm()) {
|
|
bname = "DRA71x EVM";
|
|
} else if (board_is_dra76x_evm()) {
|
|
bname = "DRA76x EVM";
|
|
} else {
|
|
/* If EEPROM is not populated */
|
|
if (is_dra72x())
|
|
bname = "DRA72x EVM";
|
|
else
|
|
bname = "DRA74x EVM";
|
|
}
|
|
|
|
if (bname)
|
|
snprintf(sysinfo.board_string, SYSINFO_BOARD_NAME_MAX_LEN,
|
|
"Board: %s REV %s\n", bname, board_ti_get_rev());
|
|
}
|
|
#endif /* CONFIG_SPL_BUILD */
|
|
|
|
void vcores_init(void)
|
|
{
|
|
if (board_is_dra74x_evm()) {
|
|
*omap_vcores = &dra752_volts;
|
|
} else if (board_is_dra72x_evm()) {
|
|
*omap_vcores = &dra722_volts;
|
|
} else if (board_is_dra71x_evm()) {
|
|
*omap_vcores = &dra718_volts;
|
|
} else if (board_is_dra76x_evm()) {
|
|
*omap_vcores = &dra76x_volts;
|
|
} else {
|
|
/* If EEPROM is not populated */
|
|
if (is_dra72x())
|
|
*omap_vcores = &dra722_volts;
|
|
else
|
|
*omap_vcores = &dra752_volts;
|
|
}
|
|
}
|
|
|
|
void set_muxconf_regs(void)
|
|
{
|
|
do_set_mux32((*ctrl)->control_padconf_core_base,
|
|
early_padconf, ARRAY_SIZE(early_padconf));
|
|
}
|
|
|
|
#if defined(CONFIG_MTD_RAW_NAND)
|
|
static int nand_sw_detect(void)
|
|
{
|
|
int rc;
|
|
uchar data[2];
|
|
struct udevice *dev;
|
|
|
|
rc = i2c_get_chip_for_busnum(NAND_PCF8575_I2C_BUS_NUM,
|
|
NAND_PCF8575_ADDR, 0, &dev);
|
|
if (rc)
|
|
return -1;
|
|
|
|
rc = dm_i2c_read(dev, 0, (uint8_t *)&data, sizeof(data));
|
|
if (rc)
|
|
return -1;
|
|
|
|
/* We are only interested in P10 and P11 on PCF8575 which is equal to
|
|
* bits 8 and 9.
|
|
*/
|
|
data[1] = data[1] & 0x3;
|
|
|
|
/* Ensure only P11 is set and P10 is cleared. This ensures only
|
|
* NAND (P10) is configured and not NOR (P11) which are both low
|
|
* true signals. NAND and NOR settings should not be enabled at
|
|
* the same time.
|
|
*/
|
|
if (data[1] == 0x2)
|
|
return 0;
|
|
|
|
return -1;
|
|
}
|
|
#else
|
|
int nand_sw_detect(void)
|
|
{
|
|
return -1;
|
|
}
|
|
#endif
|
|
|
|
#ifdef CONFIG_IODELAY_RECALIBRATION
|
|
void recalibrate_iodelay(void)
|
|
{
|
|
struct pad_conf_entry const *pads, *delta_pads = NULL;
|
|
struct iodelay_cfg_entry const *iodelay;
|
|
int npads, niodelays, delta_npads = 0;
|
|
int ret;
|
|
|
|
switch (omap_revision()) {
|
|
case DRA722_ES1_0:
|
|
case DRA722_ES2_0:
|
|
case DRA722_ES2_1:
|
|
pads = dra72x_core_padconf_array_common;
|
|
npads = ARRAY_SIZE(dra72x_core_padconf_array_common);
|
|
if (board_is_dra71x_evm()) {
|
|
pads = dra71x_core_padconf_array;
|
|
npads = ARRAY_SIZE(dra71x_core_padconf_array);
|
|
iodelay = dra71_iodelay_cfg_array;
|
|
niodelays = ARRAY_SIZE(dra71_iodelay_cfg_array);
|
|
/* If SW8 on the EVM is set to enable NAND then
|
|
* overwrite the pins used by VOUT3 with NAND.
|
|
*/
|
|
if (!nand_sw_detect()) {
|
|
delta_pads = dra71x_nand_padconf_array;
|
|
delta_npads =
|
|
ARRAY_SIZE(dra71x_nand_padconf_array);
|
|
} else {
|
|
delta_pads = dra71x_vout3_padconf_array;
|
|
delta_npads =
|
|
ARRAY_SIZE(dra71x_vout3_padconf_array);
|
|
}
|
|
|
|
} else if (board_is_dra72x_revc_or_later()) {
|
|
delta_pads = dra72x_rgmii_padconf_array_revc;
|
|
delta_npads =
|
|
ARRAY_SIZE(dra72x_rgmii_padconf_array_revc);
|
|
iodelay = dra72_iodelay_cfg_array_revc;
|
|
niodelays = ARRAY_SIZE(dra72_iodelay_cfg_array_revc);
|
|
} else {
|
|
delta_pads = dra72x_rgmii_padconf_array_revb;
|
|
delta_npads =
|
|
ARRAY_SIZE(dra72x_rgmii_padconf_array_revb);
|
|
iodelay = dra72_iodelay_cfg_array_revb;
|
|
niodelays = ARRAY_SIZE(dra72_iodelay_cfg_array_revb);
|
|
}
|
|
break;
|
|
case DRA752_ES1_0:
|
|
case DRA752_ES1_1:
|
|
pads = dra74x_core_padconf_array;
|
|
npads = ARRAY_SIZE(dra74x_core_padconf_array);
|
|
iodelay = dra742_es1_1_iodelay_cfg_array;
|
|
niodelays = ARRAY_SIZE(dra742_es1_1_iodelay_cfg_array);
|
|
break;
|
|
case DRA762_ACD_ES1_0:
|
|
case DRA762_ES1_0:
|
|
pads = dra76x_core_padconf_array;
|
|
npads = ARRAY_SIZE(dra76x_core_padconf_array);
|
|
iodelay = dra76x_es1_0_iodelay_cfg_array;
|
|
niodelays = ARRAY_SIZE(dra76x_es1_0_iodelay_cfg_array);
|
|
break;
|
|
default:
|
|
case DRA752_ES2_0:
|
|
case DRA762_ABZ_ES1_0:
|
|
pads = dra74x_core_padconf_array;
|
|
npads = ARRAY_SIZE(dra74x_core_padconf_array);
|
|
iodelay = dra742_es2_0_iodelay_cfg_array;
|
|
niodelays = ARRAY_SIZE(dra742_es2_0_iodelay_cfg_array);
|
|
/* Setup port1 and port2 for rgmii with 'no-id' mode */
|
|
clrset_spare_register(1, 0, RGMII2_ID_MODE_N_MASK |
|
|
RGMII1_ID_MODE_N_MASK);
|
|
break;
|
|
}
|
|
/* Setup I/O isolation */
|
|
ret = __recalibrate_iodelay_start();
|
|
if (ret)
|
|
goto err;
|
|
|
|
/* Do the muxing here */
|
|
do_set_mux32((*ctrl)->control_padconf_core_base, pads, npads);
|
|
|
|
/* Now do the weird minor deltas that should be safe */
|
|
if (delta_npads)
|
|
do_set_mux32((*ctrl)->control_padconf_core_base,
|
|
delta_pads, delta_npads);
|
|
|
|
if (is_dra76x())
|
|
/* Set mux for MCAN instead of DCAN1 */
|
|
clrsetbits_le32((*ctrl)->control_core_control_spare_rw,
|
|
MCAN_SEL_ALT_MASK, MCAN_SEL);
|
|
|
|
/* Setup IOdelay configuration */
|
|
ret = do_set_iodelay((*ctrl)->iodelay_config_base, iodelay, niodelays);
|
|
err:
|
|
/* Closeup.. remove isolation */
|
|
__recalibrate_iodelay_end(ret);
|
|
}
|
|
#endif
|
|
|
|
#if defined(CONFIG_MMC)
|
|
int board_mmc_init(bd_t *bis)
|
|
{
|
|
omap_mmc_init(0, 0, 0, -1, -1);
|
|
omap_mmc_init(1, 0, 0, -1, -1);
|
|
return 0;
|
|
}
|
|
|
|
void board_mmc_poweron_ldo(uint voltage)
|
|
{
|
|
if (board_is_dra71x_evm()) {
|
|
if (voltage == LDO_VOLT_3V0)
|
|
voltage = 0x19;
|
|
else if (voltage == LDO_VOLT_1V8)
|
|
voltage = 0xa;
|
|
lp873x_mmc1_poweron_ldo(voltage);
|
|
} else if (board_is_dra76x_evm()) {
|
|
palmas_mmc1_poweron_ldo(LDO4_VOLTAGE, LDO4_CTRL, voltage);
|
|
} else {
|
|
palmas_mmc1_poweron_ldo(LDO1_VOLTAGE, LDO1_CTRL, voltage);
|
|
}
|
|
}
|
|
|
|
static const struct mmc_platform_fixups dra7x_es1_1_mmc1_fixups = {
|
|
.hw_rev = "rev11",
|
|
.unsupported_caps = MMC_CAP(MMC_HS_200) |
|
|
MMC_CAP(UHS_SDR104),
|
|
.max_freq = 96000000,
|
|
};
|
|
|
|
static const struct mmc_platform_fixups dra7x_es1_1_mmc23_fixups = {
|
|
.hw_rev = "rev11",
|
|
.unsupported_caps = MMC_CAP(MMC_HS_200) |
|
|
MMC_CAP(UHS_SDR104) |
|
|
MMC_CAP(UHS_SDR50),
|
|
.max_freq = 48000000,
|
|
};
|
|
|
|
const struct mmc_platform_fixups *platform_fixups_mmc(uint32_t addr)
|
|
{
|
|
switch (omap_revision()) {
|
|
case DRA752_ES1_0:
|
|
case DRA752_ES1_1:
|
|
if (addr == OMAP_HSMMC1_BASE)
|
|
return &dra7x_es1_1_mmc1_fixups;
|
|
else
|
|
return &dra7x_es1_1_mmc23_fixups;
|
|
default:
|
|
return NULL;
|
|
}
|
|
}
|
|
#endif
|
|
|
|
#if defined(CONFIG_SPL_BUILD) && defined(CONFIG_SPL_OS_BOOT)
|
|
int spl_start_uboot(void)
|
|
{
|
|
/* break into full u-boot on 'c' */
|
|
if (serial_tstc() && serial_getc() == 'c')
|
|
return 1;
|
|
|
|
#ifdef CONFIG_SPL_ENV_SUPPORT
|
|
env_init();
|
|
env_load();
|
|
if (env_get_yesno("boot_os") != 1)
|
|
return 1;
|
|
#endif
|
|
|
|
return 0;
|
|
}
|
|
#endif
|
|
|
|
#ifdef CONFIG_BOARD_EARLY_INIT_F
|
|
/* VTT regulator enable */
|
|
static inline void vtt_regulator_enable(void)
|
|
{
|
|
if (omap_hw_init_context() == OMAP_INIT_CONTEXT_UBOOT_AFTER_SPL)
|
|
return;
|
|
|
|
/* Do not enable VTT for DRA722 or DRA76x */
|
|
if (is_dra72x() || is_dra76x())
|
|
return;
|
|
|
|
/*
|
|
* EVM Rev G and later use gpio7_11 for DDR3 termination.
|
|
* This is safe enough to do on older revs.
|
|
*/
|
|
gpio_request(GPIO_DDR_VTT_EN, "ddr_vtt_en");
|
|
gpio_direction_output(GPIO_DDR_VTT_EN, 1);
|
|
}
|
|
|
|
int board_early_init_f(void)
|
|
{
|
|
vtt_regulator_enable();
|
|
return 0;
|
|
}
|
|
#endif
|
|
|
|
#if defined(CONFIG_OF_LIBFDT) && defined(CONFIG_OF_BOARD_SETUP)
|
|
int ft_board_setup(void *blob, bd_t *bd)
|
|
{
|
|
ft_cpu_setup(blob, bd);
|
|
|
|
return 0;
|
|
}
|
|
#endif
|
|
|
|
#ifdef CONFIG_SPL_LOAD_FIT
|
|
int board_fit_config_name_match(const char *name)
|
|
{
|
|
if (is_dra72x()) {
|
|
if (board_is_dra71x_evm()) {
|
|
if (!strcmp(name, "dra71-evm"))
|
|
return 0;
|
|
}else if(board_is_dra72x_revc_or_later()) {
|
|
if (!strcmp(name, "dra72-evm-revc"))
|
|
return 0;
|
|
} else if (!strcmp(name, "dra72-evm")) {
|
|
return 0;
|
|
}
|
|
} else if (is_dra76x_acd() && !strcmp(name, "dra76-evm")) {
|
|
return 0;
|
|
} else if (!is_dra72x() && !is_dra76x_acd() &&
|
|
!strcmp(name, "dra7-evm")) {
|
|
return 0;
|
|
}
|
|
|
|
return -1;
|
|
}
|
|
#endif
|
|
|
|
#if CONFIG_IS_ENABLED(FASTBOOT) && !CONFIG_IS_ENABLED(ENV_IS_NOWHERE)
|
|
int fastboot_set_reboot_flag(void)
|
|
{
|
|
printf("Setting reboot to fastboot flag ...\n");
|
|
env_set("dofastboot", "1");
|
|
env_save();
|
|
return 0;
|
|
}
|
|
#endif
|
|
|
|
#ifdef CONFIG_TI_SECURE_DEVICE
|
|
void board_fit_image_post_process(void **p_image, size_t *p_size)
|
|
{
|
|
secure_boot_verify_image(p_image, p_size);
|
|
}
|
|
|
|
void board_tee_image_process(ulong tee_image, size_t tee_size)
|
|
{
|
|
secure_tee_install((u32)tee_image);
|
|
}
|
|
|
|
U_BOOT_FIT_LOADABLE_HANDLER(IH_TYPE_TEE, board_tee_image_process);
|
|
#endif
|