u-boot/drivers/spi/npcm_fiu_spi.c
Jim Liu 0514227e19 spi: npcm-fiu: add regulator feature and remove set clock
NPCM7xx/NPCM8xx default is boot from flash.
removed set clock feature due to reliability and security.
the clock will set by bootblock or tip.

Signed-off-by: Jim Liu <JJLIU0@nuvoton.com>
Reviewed-by: Jagan Teki <jagan@amarulasolutions.com>
2023-04-25 23:01:48 +05:30

433 lines
11 KiB
C

// SPDX-License-Identifier: GPL-2.0+
/*
* Copyright (c) 2022 Nuvoton Technology Corp.
* NPCM Flash Interface Unit(FIU) SPI master controller driver.
*/
#include <clk.h>
#include <dm.h>
#include <spi.h>
#include <spi-mem.h>
#include <linux/bitfield.h>
#include <linux/log2.h>
#include <linux/iopoll.h>
#include <power/regulator.h>
#define DW_SIZE 4
#define CHUNK_SIZE 16
#define XFER_TIMEOUT 1000000
/* FIU UMA Configuration Register (UMA_CFG) */
#define UMA_CFG_RDATSIZ_MASK GENMASK(28, 24)
#define UMA_CFG_DBSIZ_MASK GENMASK(23, 21)
#define UMA_CFG_WDATSIZ_MASK GENMASK(20, 16)
#define UMA_CFG_ADDSIZ_MASK GENMASK(13, 11)
#define UMA_CFG_RDBPCK_MASK GENMASK(9, 8)
#define UMA_CFG_DBPCK_MASK GENMASK(7, 6)
#define UMA_CFG_WDBPCK_MASK GENMASK(5, 4)
#define UMA_CFG_ADBPCK_MASK GENMASK(3, 2)
#define UMA_CFG_CMBPCK_MASK GENMASK(1, 0)
#define UMA_CFG_CMDSIZ_SHIFT 10
/* FIU UMA Control and Status Register (UMA_CTS) */
#define UMA_CTS_SW_CS BIT(16)
#define UMA_CTS_EXEC_DONE BIT(0)
#define UMA_CTS_RDYST BIT(24)
#define UMA_CTS_DEV_NUM_MASK GENMASK(9, 8)
/* Direct Write Configuration Register */
#define DWR_CFG_WBURST_MASK GENMASK(25, 24)
#define DWR_CFG_ADDSIZ_MASK GENMASK(17, 16)
#define DWR_CFG_ABPCK_MASK GENMASK(11, 10)
#define DRW_CFG_DBPCK_MASK GENMASK(9, 8)
#define DRW_CFG_WRCMD 2
enum {
DWR_WBURST_1_BYTE,
DWR_WBURST_16_BYTE = 3,
};
enum {
DWR_ADDSIZ_24_BIT,
DWR_ADDSIZ_32_BIT,
};
enum {
DWR_ABPCK_BIT_PER_CLK,
DWR_ABPCK_2_BIT_PER_CLK,
DWR_ABPCK_4_BIT_PER_CLK,
};
enum {
DWR_DBPCK_BIT_PER_CLK,
DWR_DBPCK_2_BIT_PER_CLK,
DWR_DBPCK_4_BIT_PER_CLK,
};
struct npcm_fiu_regs {
unsigned int drd_cfg;
unsigned int dwr_cfg;
unsigned int uma_cfg;
unsigned int uma_cts;
unsigned int uma_cmd;
unsigned int uma_addr;
unsigned int prt_cfg;
unsigned char res1[4];
unsigned int uma_dw0;
unsigned int uma_dw1;
unsigned int uma_dw2;
unsigned int uma_dw3;
unsigned int uma_dr0;
unsigned int uma_dr1;
unsigned int uma_dr2;
unsigned int uma_dr3;
unsigned int prt_cmd0;
unsigned int prt_cmd1;
unsigned int prt_cmd2;
unsigned int prt_cmd3;
unsigned int prt_cmd4;
unsigned int prt_cmd5;
unsigned int prt_cmd6;
unsigned int prt_cmd7;
unsigned int prt_cmd8;
unsigned int prt_cmd9;
unsigned int stuff[4];
unsigned int fiu_cfg;
};
struct npcm_fiu_priv {
struct npcm_fiu_regs *regs;
};
static int npcm_fiu_spi_set_speed(struct udevice *bus, uint speed)
{
return 0;
}
static int npcm_fiu_spi_set_mode(struct udevice *bus, uint mode)
{
return 0;
}
static inline void activate_cs(struct npcm_fiu_regs *regs, int cs)
{
writel(FIELD_PREP(UMA_CTS_DEV_NUM_MASK, cs), &regs->uma_cts);
}
static inline void deactivate_cs(struct npcm_fiu_regs *regs, int cs)
{
writel(FIELD_PREP(UMA_CTS_DEV_NUM_MASK, cs) | UMA_CTS_SW_CS, &regs->uma_cts);
}
static int fiu_uma_read(struct udevice *bus, u8 *buf, u32 size)
{
struct npcm_fiu_priv *priv = dev_get_priv(bus);
struct npcm_fiu_regs *regs = priv->regs;
u32 data_reg[4];
u32 val;
int ret;
/* Set data size */
writel(FIELD_PREP(UMA_CFG_RDATSIZ_MASK, size), &regs->uma_cfg);
/* Initiate the read */
writel(readl(&regs->uma_cts) | UMA_CTS_EXEC_DONE, &regs->uma_cts);
/* Wait for completion */
ret = readl_poll_timeout(&regs->uma_cts, val,
!(val & UMA_CTS_EXEC_DONE), XFER_TIMEOUT);
if (ret) {
printf("npcm_fiu: read timeout\n");
return ret;
}
/* Copy data from data registers */
if (size)
data_reg[0] = readl(&regs->uma_dr0);
if (size > DW_SIZE)
data_reg[1] = readl(&regs->uma_dr1);
if (size > DW_SIZE * 2)
data_reg[2] = readl(&regs->uma_dr2);
if (size > DW_SIZE * 3)
data_reg[3] = readl(&regs->uma_dr3);
memcpy(buf, data_reg, size);
return 0;
}
static int fiu_uma_write(struct udevice *bus, const u8 *buf, u32 size)
{
struct npcm_fiu_priv *priv = dev_get_priv(bus);
struct npcm_fiu_regs *regs = priv->regs;
u32 data_reg[4];
u32 val;
int ret;
/* Set data size */
writel(FIELD_PREP(UMA_CFG_WDATSIZ_MASK, size), &regs->uma_cfg);
/* Write data to data registers */
memcpy(data_reg, buf, size);
if (size)
writel(data_reg[0], &regs->uma_dw0);
if (size > DW_SIZE)
writel(data_reg[1], &regs->uma_dw1);
if (size > DW_SIZE * 2)
writel(data_reg[2], &regs->uma_dw2);
if (size > DW_SIZE * 3)
writel(data_reg[3], &regs->uma_dw3);
/* Initiate the transaction */
writel(readl(&regs->uma_cts) | UMA_CTS_EXEC_DONE, &regs->uma_cts);
/* Wait for completion */
ret = readl_poll_timeout(&regs->uma_cts, val,
!(val & UMA_CTS_EXEC_DONE), XFER_TIMEOUT);
if (ret)
printf("npcm_fiu: write timeout\n");
return ret;
}
static int npcm_fiu_spi_xfer(struct udevice *dev, unsigned int bitlen,
const void *dout, void *din, unsigned long flags)
{
struct udevice *bus = dev->parent;
struct npcm_fiu_priv *priv = dev_get_priv(bus);
struct npcm_fiu_regs *regs = priv->regs;
struct dm_spi_slave_plat *slave_plat =
dev_get_parent_plat(dev);
const u8 *tx = dout;
u8 *rx = din;
int bytes = bitlen / 8;
int ret = 0;
int len;
if (flags & SPI_XFER_BEGIN)
activate_cs(regs, slave_plat->cs);
while (bytes) {
len = (bytes > CHUNK_SIZE) ? CHUNK_SIZE : bytes;
if (tx) {
ret = fiu_uma_write(bus, tx, len);
if (ret)
break;
tx += len;
} else {
ret = fiu_uma_read(bus, rx, len);
if (ret)
break;
rx += len;
}
bytes -= len;
}
if (flags & SPI_XFER_END)
deactivate_cs(regs, slave_plat->cs);
return ret;
}
static int npcm_fiu_uma_operation(struct npcm_fiu_priv *priv, const struct spi_mem_op *op,
u32 addr, const u8 *tx, u8 *rx, u32 nbytes, bool started)
{
struct npcm_fiu_regs *regs = priv->regs;
u32 uma_cfg = 0, val;
u32 data_reg[4];
int ret;
debug("fiu_uma: opcode 0x%x, dir %d, addr 0x%x, %d bytes\n",
op->cmd.opcode, op->data.dir, addr, nbytes);
debug(" buswidth cmd:%d, addr:%d, dummy:%d, data:%d\n",
op->cmd.buswidth, op->addr.buswidth, op->dummy.buswidth,
op->data.buswidth);
debug(" size cmd:%d, addr:%d, dummy:%d, data:%d\n",
1, op->addr.nbytes, op->dummy.nbytes, op->data.nbytes);
debug(" tx %p, rx %p\n", tx, rx);
if (!started) {
/* Send cmd/addr in the begin of an transaction */
writel(op->cmd.opcode, &regs->uma_cmd);
uma_cfg |= FIELD_PREP(UMA_CFG_CMBPCK_MASK, ilog2(op->cmd.buswidth)) |
(1 << UMA_CFG_CMDSIZ_SHIFT);
/* Configure addr bytes */
if (op->addr.nbytes) {
uma_cfg |= FIELD_PREP(UMA_CFG_ADBPCK_MASK, ilog2(op->addr.buswidth)) |
FIELD_PREP(UMA_CFG_ADDSIZ_MASK, op->addr.nbytes);
writel(addr, &regs->uma_addr);
}
/* Configure dummy bytes */
if (op->dummy.nbytes)
uma_cfg |= FIELD_PREP(UMA_CFG_DBPCK_MASK, ilog2(op->dummy.buswidth)) |
FIELD_PREP(UMA_CFG_DBSIZ_MASK, op->dummy.nbytes);
}
/* Set data bus width and data size */
if (op->data.dir == SPI_MEM_DATA_IN && nbytes)
uma_cfg |= FIELD_PREP(UMA_CFG_RDBPCK_MASK, ilog2(op->data.buswidth)) |
FIELD_PREP(UMA_CFG_RDATSIZ_MASK, nbytes);
else if (op->data.dir == SPI_MEM_DATA_OUT && nbytes)
uma_cfg |= FIELD_PREP(UMA_CFG_WDBPCK_MASK, ilog2(op->data.buswidth)) |
FIELD_PREP(UMA_CFG_WDATSIZ_MASK, nbytes);
writel(uma_cfg, &regs->uma_cfg);
if (op->data.dir == SPI_MEM_DATA_OUT && nbytes) {
memcpy(data_reg, tx, nbytes);
if (nbytes)
writel(data_reg[0], &regs->uma_dw0);
if (nbytes > DW_SIZE)
writel(data_reg[1], &regs->uma_dw1);
if (nbytes > DW_SIZE * 2)
writel(data_reg[2], &regs->uma_dw2);
if (nbytes > DW_SIZE * 3)
writel(data_reg[3], &regs->uma_dw3);
}
/* Initiate the transaction */
writel(readl(&regs->uma_cts) | UMA_CTS_EXEC_DONE, &regs->uma_cts);
/* Wait for completion */
ret = readl_poll_timeout(&regs->uma_cts, val,
!(val & UMA_CTS_EXEC_DONE), XFER_TIMEOUT);
if (ret) {
printf("npcm_fiu: UMA op timeout\n");
return ret;
}
if (op->data.dir == SPI_MEM_DATA_IN && nbytes) {
if (nbytes)
data_reg[0] = readl(&regs->uma_dr0);
if (nbytes > DW_SIZE)
data_reg[1] = readl(&regs->uma_dr1);
if (nbytes > DW_SIZE * 2)
data_reg[2] = readl(&regs->uma_dr2);
if (nbytes > DW_SIZE * 3)
data_reg[3] = readl(&regs->uma_dr3);
memcpy(rx, data_reg, nbytes);
}
return 0;
}
static int npcm_fiu_exec_op(struct spi_slave *slave,
const struct spi_mem_op *op)
{
struct udevice *bus = slave->dev->parent;
struct npcm_fiu_priv *priv = dev_get_priv(bus);
struct npcm_fiu_regs *regs = priv->regs;
struct dm_spi_slave_plat *slave_plat = dev_get_parent_plat(slave->dev);
u32 bytes, len, addr;
const u8 *tx;
u8 *rx;
bool started = false;
int ret;
bytes = op->data.nbytes;
addr = (u32)op->addr.val;
if (!bytes) {
activate_cs(regs, slave_plat->cs);
ret = npcm_fiu_uma_operation(priv, op, addr, NULL, NULL, 0, false);
deactivate_cs(regs, slave_plat->cs);
return ret;
}
tx = op->data.buf.out;
rx = op->data.buf.in;
/*
* Use SW-control CS for write to extend the transaction and
* keep the Write Enable state.
* Use HW-control CS for read to avoid clock and timing issues.
*/
if (op->data.dir == SPI_MEM_DATA_OUT)
activate_cs(regs, slave_plat->cs);
else
writel(FIELD_PREP(UMA_CTS_DEV_NUM_MASK, slave_plat->cs) | UMA_CTS_SW_CS,
&regs->uma_cts);
while (bytes) {
len = (bytes > CHUNK_SIZE) ? CHUNK_SIZE : bytes;
ret = npcm_fiu_uma_operation(priv, op, addr, tx, rx, len, started);
if (ret)
return ret;
/* CS is kept low for uma write, extend the transaction */
if (op->data.dir == SPI_MEM_DATA_OUT)
started = true;
bytes -= len;
addr += len;
if (tx)
tx += len;
if (rx)
rx += len;
}
if (op->data.dir == SPI_MEM_DATA_OUT)
deactivate_cs(regs, slave_plat->cs);
return 0;
}
static int npcm_fiu_spi_probe(struct udevice *bus)
{
struct npcm_fiu_priv *priv = dev_get_priv(bus);
struct udevice *vqspi_supply;
int vqspi_uv;
priv->regs = (struct npcm_fiu_regs *)dev_read_addr_ptr(bus);
if (IS_ENABLED(CONFIG_DM_REGULATOR)) {
device_get_supply_regulator(bus, "vqspi-supply", &vqspi_supply);
vqspi_uv = dev_read_u32_default(bus, "vqspi-microvolt", 0);
/* Set IO voltage */
if (vqspi_supply && vqspi_uv)
regulator_set_value(vqspi_supply, vqspi_uv);
}
return 0;
}
static int npcm_fiu_spi_bind(struct udevice *bus)
{
struct npcm_fiu_regs *regs;
if (dev_read_bool(bus, "nuvoton,spix-mode")) {
regs = dev_read_addr_ptr(bus);
if (!regs)
return -EINVAL;
/* Setup direct write cfg for SPIX */
writel(FIELD_PREP(DWR_CFG_WBURST_MASK, DWR_WBURST_16_BYTE) |
FIELD_PREP(DWR_CFG_ADDSIZ_MASK, DWR_ADDSIZ_24_BIT) |
FIELD_PREP(DWR_CFG_ABPCK_MASK, DWR_ABPCK_4_BIT_PER_CLK) |
FIELD_PREP(DRW_CFG_DBPCK_MASK, DWR_DBPCK_4_BIT_PER_CLK) |
DRW_CFG_WRCMD, &regs->dwr_cfg);
}
return 0;
}
static const struct spi_controller_mem_ops npcm_fiu_mem_ops = {
.exec_op = npcm_fiu_exec_op,
};
static const struct dm_spi_ops npcm_fiu_spi_ops = {
.xfer = npcm_fiu_spi_xfer,
.set_speed = npcm_fiu_spi_set_speed,
.set_mode = npcm_fiu_spi_set_mode,
.mem_ops = &npcm_fiu_mem_ops,
};
static const struct udevice_id npcm_fiu_spi_ids[] = {
{ .compatible = "nuvoton,npcm845-fiu" },
{ .compatible = "nuvoton,npcm750-fiu" },
{ }
};
U_BOOT_DRIVER(npcm_fiu_spi) = {
.name = "npcm_fiu_spi",
.id = UCLASS_SPI,
.of_match = npcm_fiu_spi_ids,
.ops = &npcm_fiu_spi_ops,
.priv_auto = sizeof(struct npcm_fiu_priv),
.probe = npcm_fiu_spi_probe,
.bind = npcm_fiu_spi_bind,
};