mirror of
https://github.com/AsahiLinux/u-boot
synced 2024-11-18 02:38:56 +00:00
c69cda25c9
Rename this to be consistent with the change from 'platdata'. Signed-off-by: Simon Glass <sjg@chromium.org>
656 lines
16 KiB
C
656 lines
16 KiB
C
// SPDX-License-Identifier: GPL-2.0+
|
|
/*
|
|
* MediaTek ethernet IP driver for U-Boot
|
|
*
|
|
* Copyright (C) 2018 Stefan Roese <sr@denx.de>
|
|
*
|
|
* This code is mostly based on the code extracted from this MediaTek
|
|
* github repository:
|
|
*
|
|
* https://github.com/MediaTek-Labs/linkit-smart-uboot.git
|
|
*
|
|
* I was not able to find a specific license or other developers
|
|
* copyrights here, so I can't add them here.
|
|
*/
|
|
|
|
#include <common.h>
|
|
#include <cpu_func.h>
|
|
#include <dm.h>
|
|
#include <log.h>
|
|
#include <malloc.h>
|
|
#include <miiphy.h>
|
|
#include <net.h>
|
|
#include <reset.h>
|
|
#include <wait_bit.h>
|
|
#include <asm/cache.h>
|
|
#include <asm/io.h>
|
|
#include <linux/bitfield.h>
|
|
#include <linux/bitops.h>
|
|
#include <linux/delay.h>
|
|
#include <linux/err.h>
|
|
|
|
/* Ethernet frame engine register */
|
|
#define PDMA_RELATED 0x0800
|
|
|
|
#define TX_BASE_PTR0 (PDMA_RELATED + 0x000)
|
|
#define TX_MAX_CNT0 (PDMA_RELATED + 0x004)
|
|
#define TX_CTX_IDX0 (PDMA_RELATED + 0x008)
|
|
#define TX_DTX_IDX0 (PDMA_RELATED + 0x00c)
|
|
|
|
#define RX_BASE_PTR0 (PDMA_RELATED + 0x100)
|
|
#define RX_MAX_CNT0 (PDMA_RELATED + 0x104)
|
|
#define RX_CALC_IDX0 (PDMA_RELATED + 0x108)
|
|
|
|
#define PDMA_GLO_CFG (PDMA_RELATED + 0x204)
|
|
#define PDMA_RST_IDX (PDMA_RELATED + 0x208)
|
|
#define DLY_INT_CFG (PDMA_RELATED + 0x20c)
|
|
|
|
#define SDM_RELATED 0x0c00
|
|
|
|
#define SDM_MAC_ADRL (SDM_RELATED + 0x0c) /* MAC address LSB */
|
|
#define SDM_MAC_ADRH (SDM_RELATED + 0x10) /* MAC Address MSB */
|
|
|
|
#define RST_DTX_IDX0 BIT(0)
|
|
#define RST_DRX_IDX0 BIT(16)
|
|
|
|
#define TX_DMA_EN BIT(0)
|
|
#define TX_DMA_BUSY BIT(1)
|
|
#define RX_DMA_EN BIT(2)
|
|
#define RX_DMA_BUSY BIT(3)
|
|
#define TX_WB_DDONE BIT(6)
|
|
|
|
/* Ethernet switch register */
|
|
#define MT7628_SWITCH_FCT0 0x0008
|
|
#define MT7628_SWITCH_PFC1 0x0014
|
|
#define MT7628_SWITCH_PVIDC0 0x0040
|
|
#define MT7628_SWITCH_PVIDC1 0x0044
|
|
#define MT7628_SWITCH_PVIDC2 0x0048
|
|
#define MT7628_SWITCH_PVIDC3 0x004c
|
|
#define MT7628_SWITCH_VMSC0 0x0070
|
|
#define MT7628_SWITCH_FPA 0x0084
|
|
#define MT7628_SWITCH_SOCPC 0x008c
|
|
#define MT7628_SWITCH_POC0 0x0090
|
|
#define MT7628_SWITCH_POC2 0x0098
|
|
#define MT7628_SWITCH_SGC 0x009c
|
|
#define MT7628_SWITCH_PCR0 0x00c0
|
|
#define PCR0_PHY_ADDR GENMASK(4, 0)
|
|
#define PCR0_PHY_REG GENMASK(12, 8)
|
|
#define PCR0_WT_PHY_CMD BIT(13)
|
|
#define PCR0_RD_PHY_CMD BIT(14)
|
|
#define PCR0_WT_DATA GENMASK(31, 16)
|
|
|
|
#define MT7628_SWITCH_PCR1 0x00c4
|
|
#define PCR1_WT_DONE BIT(0)
|
|
#define PCR1_RD_RDY BIT(1)
|
|
#define PCR1_RD_DATA GENMASK(31, 16)
|
|
|
|
#define MT7628_SWITCH_FPA1 0x00c8
|
|
#define MT7628_SWITCH_FCT2 0x00cc
|
|
#define MT7628_SWITCH_SGC2 0x00e4
|
|
#define MT7628_SWITCH_BMU_CTRL 0x0110
|
|
|
|
/* rxd2 */
|
|
#define RX_DMA_DONE BIT(31)
|
|
#define RX_DMA_LSO BIT(30)
|
|
#define RX_DMA_PLEN0 GENMASK(29, 16)
|
|
#define RX_DMA_TAG BIT(15)
|
|
|
|
struct fe_rx_dma {
|
|
unsigned int rxd1;
|
|
unsigned int rxd2;
|
|
unsigned int rxd3;
|
|
unsigned int rxd4;
|
|
} __packed __aligned(4);
|
|
|
|
#define TX_DMA_PLEN0 GENMASK(29, 16)
|
|
#define TX_DMA_LS1 BIT(14)
|
|
#define TX_DMA_LS0 BIT(30)
|
|
#define TX_DMA_DONE BIT(31)
|
|
|
|
#define TX_DMA_INS_VLAN_MT7621 BIT(16)
|
|
#define TX_DMA_INS_VLAN BIT(7)
|
|
#define TX_DMA_INS_PPPOE BIT(12)
|
|
#define TX_DMA_PN GENMASK(26, 24)
|
|
|
|
struct fe_tx_dma {
|
|
unsigned int txd1;
|
|
unsigned int txd2;
|
|
unsigned int txd3;
|
|
unsigned int txd4;
|
|
} __packed __aligned(4);
|
|
|
|
#define NUM_RX_DESC 256
|
|
#define NUM_TX_DESC 4
|
|
#define NUM_PHYS 5
|
|
|
|
#define PADDING_LENGTH 60
|
|
|
|
#define MTK_QDMA_PAGE_SIZE 2048
|
|
|
|
#define CONFIG_MDIO_TIMEOUT 100
|
|
#define CONFIG_DMA_STOP_TIMEOUT 100
|
|
#define CONFIG_TX_DMA_TIMEOUT 100
|
|
|
|
struct mt7628_eth_dev {
|
|
void __iomem *base; /* frame engine base address */
|
|
void __iomem *eth_sw_base; /* switch base address */
|
|
|
|
struct mii_dev *bus;
|
|
|
|
struct fe_tx_dma *tx_ring;
|
|
struct fe_rx_dma *rx_ring;
|
|
|
|
u8 *rx_buf[NUM_RX_DESC];
|
|
|
|
/* Point to the next RXD DMA wants to use in RXD Ring0 */
|
|
int rx_dma_idx;
|
|
/* Point to the next TXD in TXD Ring0 CPU wants to use */
|
|
int tx_dma_idx;
|
|
|
|
struct reset_ctl rst_ephy;
|
|
|
|
struct phy_device *phy;
|
|
|
|
int wan_port;
|
|
};
|
|
|
|
static int mt7628_eth_free_pkt(struct udevice *dev, uchar *packet, int length);
|
|
|
|
static int mdio_wait_read(struct mt7628_eth_dev *priv, u32 mask, bool mask_set)
|
|
{
|
|
void __iomem *base = priv->eth_sw_base;
|
|
int ret;
|
|
|
|
ret = wait_for_bit_le32(base + MT7628_SWITCH_PCR1, mask, mask_set,
|
|
CONFIG_MDIO_TIMEOUT, false);
|
|
if (ret) {
|
|
printf("MDIO operation timeout!\n");
|
|
return -ETIMEDOUT;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int mii_mgr_read(struct mt7628_eth_dev *priv,
|
|
u32 phy_addr, u32 phy_register, u32 *read_data)
|
|
{
|
|
void __iomem *base = priv->eth_sw_base;
|
|
u32 status = 0;
|
|
u32 ret;
|
|
|
|
*read_data = 0xffff;
|
|
/* Make sure previous read operation is complete */
|
|
ret = mdio_wait_read(priv, PCR1_RD_RDY, false);
|
|
if (ret)
|
|
return ret;
|
|
|
|
writel(PCR0_RD_PHY_CMD |
|
|
FIELD_PREP(PCR0_PHY_REG, phy_register) |
|
|
FIELD_PREP(PCR0_PHY_ADDR, phy_addr),
|
|
base + MT7628_SWITCH_PCR0);
|
|
|
|
/* Make sure previous read operation is complete */
|
|
ret = mdio_wait_read(priv, PCR1_RD_RDY, true);
|
|
if (ret)
|
|
return ret;
|
|
|
|
status = readl(base + MT7628_SWITCH_PCR1);
|
|
*read_data = FIELD_GET(PCR1_RD_DATA, status);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int mii_mgr_write(struct mt7628_eth_dev *priv,
|
|
u32 phy_addr, u32 phy_register, u32 write_data)
|
|
{
|
|
void __iomem *base = priv->eth_sw_base;
|
|
u32 data;
|
|
int ret;
|
|
|
|
/* Make sure previous write operation is complete */
|
|
ret = mdio_wait_read(priv, PCR1_WT_DONE, false);
|
|
if (ret)
|
|
return ret;
|
|
|
|
data = FIELD_PREP(PCR0_WT_DATA, write_data) |
|
|
FIELD_PREP(PCR0_PHY_REG, phy_register) |
|
|
FIELD_PREP(PCR0_PHY_ADDR, phy_addr) |
|
|
PCR0_WT_PHY_CMD;
|
|
writel(data, base + MT7628_SWITCH_PCR0);
|
|
|
|
return mdio_wait_read(priv, PCR1_WT_DONE, true);
|
|
}
|
|
|
|
static int mt7628_mdio_read(struct mii_dev *bus, int addr, int devad, int reg)
|
|
{
|
|
u32 val;
|
|
int ret;
|
|
|
|
ret = mii_mgr_read(bus->priv, addr, reg, &val);
|
|
if (ret)
|
|
return ret;
|
|
|
|
return val;
|
|
}
|
|
|
|
static int mt7628_mdio_write(struct mii_dev *bus, int addr, int devad, int reg,
|
|
u16 value)
|
|
{
|
|
return mii_mgr_write(bus->priv, addr, reg, value);
|
|
}
|
|
|
|
static void mt7628_ephy_init(struct mt7628_eth_dev *priv)
|
|
{
|
|
int i;
|
|
|
|
mii_mgr_write(priv, 0, 31, 0x2000); /* change G2 page */
|
|
mii_mgr_write(priv, 0, 26, 0x0000);
|
|
|
|
for (i = 0; i < 5; i++) {
|
|
mii_mgr_write(priv, i, 31, 0x8000); /* change L0 page */
|
|
mii_mgr_write(priv, i, 0, 0x3100);
|
|
|
|
/* EEE disable */
|
|
mii_mgr_write(priv, i, 30, 0xa000);
|
|
mii_mgr_write(priv, i, 31, 0xa000); /* change L2 page */
|
|
mii_mgr_write(priv, i, 16, 0x0606);
|
|
mii_mgr_write(priv, i, 23, 0x0f0e);
|
|
mii_mgr_write(priv, i, 24, 0x1610);
|
|
mii_mgr_write(priv, i, 30, 0x1f15);
|
|
mii_mgr_write(priv, i, 28, 0x6111);
|
|
}
|
|
|
|
/* 100Base AOI setting */
|
|
mii_mgr_write(priv, 0, 31, 0x5000); /* change G5 page */
|
|
mii_mgr_write(priv, 0, 19, 0x004a);
|
|
mii_mgr_write(priv, 0, 20, 0x015a);
|
|
mii_mgr_write(priv, 0, 21, 0x00ee);
|
|
mii_mgr_write(priv, 0, 22, 0x0033);
|
|
mii_mgr_write(priv, 0, 23, 0x020a);
|
|
mii_mgr_write(priv, 0, 24, 0x0000);
|
|
mii_mgr_write(priv, 0, 25, 0x024a);
|
|
mii_mgr_write(priv, 0, 26, 0x035a);
|
|
mii_mgr_write(priv, 0, 27, 0x02ee);
|
|
mii_mgr_write(priv, 0, 28, 0x0233);
|
|
mii_mgr_write(priv, 0, 29, 0x000a);
|
|
mii_mgr_write(priv, 0, 30, 0x0000);
|
|
|
|
/* Fix EPHY idle state abnormal behavior */
|
|
mii_mgr_write(priv, 0, 31, 0x4000); /* change G4 page */
|
|
mii_mgr_write(priv, 0, 29, 0x000d);
|
|
mii_mgr_write(priv, 0, 30, 0x0500);
|
|
}
|
|
|
|
static void rt305x_esw_init(struct mt7628_eth_dev *priv)
|
|
{
|
|
void __iomem *base = priv->eth_sw_base;
|
|
void __iomem *reg;
|
|
u32 val = 0, pvid;
|
|
int i;
|
|
|
|
/*
|
|
* FC_RLS_TH=200, FC_SET_TH=160
|
|
* DROP_RLS=120, DROP_SET_TH=80
|
|
*/
|
|
writel(0xc8a07850, base + MT7628_SWITCH_FCT0);
|
|
writel(0x00000000, base + MT7628_SWITCH_SGC2);
|
|
writel(0x00405555, base + MT7628_SWITCH_PFC1);
|
|
writel(0x00007f7f, base + MT7628_SWITCH_POC0);
|
|
writel(0x00007f7f, base + MT7628_SWITCH_POC2); /* disable VLAN */
|
|
writel(0x0002500c, base + MT7628_SWITCH_FCT2);
|
|
/* hashing algorithm=XOR48, aging interval=300sec */
|
|
writel(0x0008a301, base + MT7628_SWITCH_SGC);
|
|
writel(0x02404040, base + MT7628_SWITCH_SOCPC);
|
|
|
|
/* Ext PHY Addr=0x1f */
|
|
writel(0x3f502b28, base + MT7628_SWITCH_FPA1);
|
|
writel(0x00000000, base + MT7628_SWITCH_FPA);
|
|
/* 1us cycle number=125 (FE's clock=125Mhz) */
|
|
writel(0x7d000000, base + MT7628_SWITCH_BMU_CTRL);
|
|
|
|
/* LAN/WAN partition, WAN port will be unusable in u-boot network */
|
|
if (priv->wan_port >= 0 && priv->wan_port < 6) {
|
|
for (i = 0; i < 8; i++) {
|
|
pvid = i == priv->wan_port ? 2 : 1;
|
|
reg = base + MT7628_SWITCH_PVIDC0 + (i / 2) * 4;
|
|
if (i % 2 == 0) {
|
|
val = pvid;
|
|
} else {
|
|
val |= (pvid << 12);
|
|
writel(val, reg);
|
|
}
|
|
}
|
|
|
|
val = 0xffff407f;
|
|
val |= 1 << (8 + priv->wan_port);
|
|
val &= ~(1 << priv->wan_port);
|
|
writel(val, base + MT7628_SWITCH_VMSC0);
|
|
}
|
|
|
|
/* Reset PHY */
|
|
reset_assert(&priv->rst_ephy);
|
|
reset_deassert(&priv->rst_ephy);
|
|
mdelay(10);
|
|
|
|
mt7628_ephy_init(priv);
|
|
}
|
|
|
|
static void eth_dma_start(struct mt7628_eth_dev *priv)
|
|
{
|
|
void __iomem *base = priv->base;
|
|
|
|
setbits_le32(base + PDMA_GLO_CFG, TX_WB_DDONE | RX_DMA_EN | TX_DMA_EN);
|
|
}
|
|
|
|
static void eth_dma_stop(struct mt7628_eth_dev *priv)
|
|
{
|
|
void __iomem *base = priv->base;
|
|
int ret;
|
|
|
|
clrbits_le32(base + PDMA_GLO_CFG, TX_WB_DDONE | RX_DMA_EN | TX_DMA_EN);
|
|
|
|
/* Wait for DMA to stop */
|
|
ret = wait_for_bit_le32(base + PDMA_GLO_CFG,
|
|
RX_DMA_BUSY | TX_DMA_BUSY, false,
|
|
CONFIG_DMA_STOP_TIMEOUT, false);
|
|
if (ret)
|
|
printf("DMA stop timeout error!\n");
|
|
}
|
|
|
|
static int mt7628_eth_write_hwaddr(struct udevice *dev)
|
|
{
|
|
struct mt7628_eth_dev *priv = dev_get_priv(dev);
|
|
void __iomem *base = priv->base;
|
|
u8 *addr = ((struct eth_pdata *)dev_get_plat(dev))->enetaddr;
|
|
u32 val;
|
|
|
|
/* Set MAC address. */
|
|
val = addr[0];
|
|
val = (val << 8) | addr[1];
|
|
writel(val, base + SDM_MAC_ADRH);
|
|
|
|
val = addr[2];
|
|
val = (val << 8) | addr[3];
|
|
val = (val << 8) | addr[4];
|
|
val = (val << 8) | addr[5];
|
|
writel(val, base + SDM_MAC_ADRL);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int mt7628_eth_send(struct udevice *dev, void *packet, int length)
|
|
{
|
|
struct mt7628_eth_dev *priv = dev_get_priv(dev);
|
|
void __iomem *base = priv->base;
|
|
int ret;
|
|
int idx;
|
|
int i;
|
|
|
|
idx = priv->tx_dma_idx;
|
|
|
|
/* Pad message to a minimum length */
|
|
if (length < PADDING_LENGTH) {
|
|
char *p = (char *)packet;
|
|
|
|
for (i = 0; i < PADDING_LENGTH - length; i++)
|
|
p[length + i] = 0;
|
|
length = PADDING_LENGTH;
|
|
}
|
|
|
|
/* Check if buffer is ready for next TX DMA */
|
|
ret = wait_for_bit_le32(&priv->tx_ring[idx].txd2, TX_DMA_DONE, true,
|
|
CONFIG_TX_DMA_TIMEOUT, false);
|
|
if (ret) {
|
|
printf("TX: DMA still busy on buffer %d\n", idx);
|
|
return ret;
|
|
}
|
|
|
|
flush_dcache_range((u32)packet, (u32)packet + length);
|
|
|
|
priv->tx_ring[idx].txd1 = CPHYSADDR(packet);
|
|
priv->tx_ring[idx].txd2 &= ~TX_DMA_PLEN0;
|
|
priv->tx_ring[idx].txd2 |= FIELD_PREP(TX_DMA_PLEN0, length);
|
|
priv->tx_ring[idx].txd2 &= ~TX_DMA_DONE;
|
|
|
|
idx = (idx + 1) % NUM_TX_DESC;
|
|
|
|
/* Make sure the writes executed at this place */
|
|
wmb();
|
|
writel(idx, base + TX_CTX_IDX0);
|
|
|
|
priv->tx_dma_idx = idx;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int mt7628_eth_recv(struct udevice *dev, int flags, uchar **packetp)
|
|
{
|
|
struct mt7628_eth_dev *priv = dev_get_priv(dev);
|
|
u32 rxd_info;
|
|
int length;
|
|
int idx;
|
|
|
|
idx = priv->rx_dma_idx;
|
|
|
|
rxd_info = priv->rx_ring[idx].rxd2;
|
|
if ((rxd_info & RX_DMA_DONE) == 0)
|
|
return -EAGAIN;
|
|
|
|
length = FIELD_GET(RX_DMA_PLEN0, priv->rx_ring[idx].rxd2);
|
|
if (length == 0 || length > MTK_QDMA_PAGE_SIZE) {
|
|
printf("%s: invalid length (%d bytes)\n", __func__, length);
|
|
mt7628_eth_free_pkt(dev, NULL, 0);
|
|
return -EIO;
|
|
}
|
|
|
|
*packetp = priv->rx_buf[idx];
|
|
invalidate_dcache_range((u32)*packetp, (u32)*packetp + length);
|
|
|
|
priv->rx_ring[idx].rxd4 = 0;
|
|
priv->rx_ring[idx].rxd2 = RX_DMA_LSO;
|
|
|
|
/* Make sure the writes executed at this place */
|
|
wmb();
|
|
|
|
return length;
|
|
}
|
|
|
|
static int mt7628_eth_free_pkt(struct udevice *dev, uchar *packet, int length)
|
|
{
|
|
struct mt7628_eth_dev *priv = dev_get_priv(dev);
|
|
void __iomem *base = priv->base;
|
|
int idx;
|
|
|
|
idx = priv->rx_dma_idx;
|
|
|
|
/* Move point to next RXD which wants to alloc */
|
|
writel(idx, base + RX_CALC_IDX0);
|
|
|
|
/* Update to Next packet point that was received */
|
|
idx = (idx + 1) % NUM_RX_DESC;
|
|
|
|
priv->rx_dma_idx = idx;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int mt7628_eth_start(struct udevice *dev)
|
|
{
|
|
struct mt7628_eth_dev *priv = dev_get_priv(dev);
|
|
void __iomem *base = priv->base;
|
|
uchar packet[MTK_QDMA_PAGE_SIZE];
|
|
uchar *packetp;
|
|
int ret;
|
|
int i;
|
|
|
|
for (i = 0; i < NUM_RX_DESC; i++) {
|
|
memset((void *)&priv->rx_ring[i], 0, sizeof(priv->rx_ring[0]));
|
|
priv->rx_ring[i].rxd2 |= RX_DMA_LSO;
|
|
priv->rx_ring[i].rxd1 = CPHYSADDR(priv->rx_buf[i]);
|
|
}
|
|
|
|
for (i = 0; i < NUM_TX_DESC; i++) {
|
|
memset((void *)&priv->tx_ring[i], 0, sizeof(priv->tx_ring[0]));
|
|
priv->tx_ring[i].txd2 = TX_DMA_LS0 | TX_DMA_DONE;
|
|
priv->tx_ring[i].txd4 = FIELD_PREP(TX_DMA_PN, 1);
|
|
}
|
|
|
|
priv->rx_dma_idx = 0;
|
|
priv->tx_dma_idx = 0;
|
|
|
|
/* Make sure the writes executed at this place */
|
|
wmb();
|
|
|
|
/* disable delay interrupt */
|
|
writel(0, base + DLY_INT_CFG);
|
|
|
|
clrbits_le32(base + PDMA_GLO_CFG, 0xffff0000);
|
|
|
|
/* Tell the adapter where the TX/RX rings are located. */
|
|
writel(CPHYSADDR(&priv->rx_ring[0]), base + RX_BASE_PTR0);
|
|
writel(CPHYSADDR((u32)&priv->tx_ring[0]), base + TX_BASE_PTR0);
|
|
|
|
writel(NUM_RX_DESC, base + RX_MAX_CNT0);
|
|
writel(NUM_TX_DESC, base + TX_MAX_CNT0);
|
|
|
|
writel(priv->tx_dma_idx, base + TX_CTX_IDX0);
|
|
writel(RST_DTX_IDX0, base + PDMA_RST_IDX);
|
|
|
|
writel(NUM_RX_DESC - 1, base + RX_CALC_IDX0);
|
|
writel(RST_DRX_IDX0, base + PDMA_RST_IDX);
|
|
|
|
/* Make sure the writes executed at this place */
|
|
wmb();
|
|
eth_dma_start(priv);
|
|
|
|
if (priv->phy) {
|
|
ret = phy_startup(priv->phy);
|
|
if (ret)
|
|
return ret;
|
|
|
|
if (!priv->phy->link)
|
|
return -EAGAIN;
|
|
}
|
|
|
|
/*
|
|
* The integrated switch seems to queue some received ethernet
|
|
* packets in some FIFO. Lets read the already queued packets
|
|
* out by using the receive routine, so that these old messages
|
|
* are dropped before the new xfer starts.
|
|
*/
|
|
packetp = &packet[0];
|
|
while (mt7628_eth_recv(dev, 0, &packetp) != -EAGAIN)
|
|
mt7628_eth_free_pkt(dev, packetp, 0);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static void mt7628_eth_stop(struct udevice *dev)
|
|
{
|
|
struct mt7628_eth_dev *priv = dev_get_priv(dev);
|
|
|
|
eth_dma_stop(priv);
|
|
}
|
|
|
|
static int mt7628_eth_probe(struct udevice *dev)
|
|
{
|
|
struct mt7628_eth_dev *priv = dev_get_priv(dev);
|
|
struct mii_dev *bus;
|
|
int poll_link_phy;
|
|
int ret;
|
|
int i;
|
|
|
|
/* Save frame-engine base address for later use */
|
|
priv->base = dev_remap_addr_index(dev, 0);
|
|
if (IS_ERR(priv->base))
|
|
return PTR_ERR(priv->base);
|
|
|
|
/* Save switch base address for later use */
|
|
priv->eth_sw_base = dev_remap_addr_index(dev, 1);
|
|
if (IS_ERR(priv->eth_sw_base))
|
|
return PTR_ERR(priv->eth_sw_base);
|
|
|
|
/* Reset controller */
|
|
ret = reset_get_by_name(dev, "ephy", &priv->rst_ephy);
|
|
if (ret) {
|
|
pr_err("unable to find reset controller for ethernet PHYs\n");
|
|
return ret;
|
|
}
|
|
|
|
/* WAN port will be isolated from LAN ports */
|
|
priv->wan_port = dev_read_u32_default(dev, "mediatek,wan-port", -1);
|
|
|
|
/* Put rx and tx rings into KSEG1 area (uncached) */
|
|
priv->tx_ring = (struct fe_tx_dma *)
|
|
KSEG1ADDR(memalign(ARCH_DMA_MINALIGN,
|
|
sizeof(*priv->tx_ring) * NUM_TX_DESC));
|
|
priv->rx_ring = (struct fe_rx_dma *)
|
|
KSEG1ADDR(memalign(ARCH_DMA_MINALIGN,
|
|
sizeof(*priv->rx_ring) * NUM_RX_DESC));
|
|
|
|
for (i = 0; i < NUM_RX_DESC; i++)
|
|
priv->rx_buf[i] = memalign(PKTALIGN, MTK_QDMA_PAGE_SIZE);
|
|
|
|
bus = mdio_alloc();
|
|
if (!bus) {
|
|
printf("Failed to allocate MDIO bus\n");
|
|
return -ENOMEM;
|
|
}
|
|
|
|
bus->read = mt7628_mdio_read;
|
|
bus->write = mt7628_mdio_write;
|
|
snprintf(bus->name, sizeof(bus->name), dev->name);
|
|
bus->priv = (void *)priv;
|
|
|
|
ret = mdio_register(bus);
|
|
if (ret)
|
|
return ret;
|
|
|
|
poll_link_phy = dev_read_u32_default(dev, "mediatek,poll-link-phy", -1);
|
|
if (poll_link_phy >= 0) {
|
|
if (poll_link_phy >= NUM_PHYS) {
|
|
pr_err("invalid phy %d for poll-link-phy\n",
|
|
poll_link_phy);
|
|
return ret;
|
|
}
|
|
|
|
priv->phy = phy_connect(bus, poll_link_phy, dev,
|
|
PHY_INTERFACE_MODE_MII);
|
|
if (!priv->phy) {
|
|
pr_err("failed to probe phy %d\n", poll_link_phy);
|
|
return -ENODEV;
|
|
}
|
|
|
|
priv->phy->advertising = priv->phy->supported;
|
|
phy_config(priv->phy);
|
|
}
|
|
|
|
/* Switch configuration */
|
|
rt305x_esw_init(priv);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static const struct eth_ops mt7628_eth_ops = {
|
|
.start = mt7628_eth_start,
|
|
.send = mt7628_eth_send,
|
|
.recv = mt7628_eth_recv,
|
|
.free_pkt = mt7628_eth_free_pkt,
|
|
.stop = mt7628_eth_stop,
|
|
.write_hwaddr = mt7628_eth_write_hwaddr,
|
|
};
|
|
|
|
static const struct udevice_id mt7628_eth_ids[] = {
|
|
{ .compatible = "mediatek,mt7628-eth" },
|
|
{ }
|
|
};
|
|
|
|
U_BOOT_DRIVER(mt7628_eth) = {
|
|
.name = "mt7628_eth",
|
|
.id = UCLASS_ETH,
|
|
.of_match = mt7628_eth_ids,
|
|
.probe = mt7628_eth_probe,
|
|
.ops = &mt7628_eth_ops,
|
|
.priv_auto = sizeof(struct mt7628_eth_dev),
|
|
.plat_auto = sizeof(struct eth_pdata),
|
|
};
|