mirror of
https://github.com/AsahiLinux/u-boot
synced 2024-11-08 06:04:34 +00:00
808cea90f5
This mvebu axp platform always uses fixed 250 MHz TCLK. So specify this CONFIG_SYS_TCLK option in msys section of global file soc.h file instead of manual configuration in every board file. Now every #if-#else case of soc.h file defines CONFIG_SYS_TCLK, so remove useless default CONFIG_SYS_TCLK value from the end of soc.h file. Signed-off-by: Pali Rohár <pali@kernel.org> Reviewed-by: Stefan Roese <sr@denx.de>
95 lines
2.4 KiB
C
95 lines
2.4 KiB
C
/* SPDX-License-Identifier: GPL-2.0+ */
|
|
/*
|
|
* Copyright (C) 2014 Stefan Roese <sr@denx.de>
|
|
*/
|
|
|
|
#ifndef _CONFIG_SYNOLOGY_DS414_H
|
|
#define _CONFIG_SYNOLOGY_DS414_H
|
|
|
|
/* Vendor kernel expects this MACH_TYPE */
|
|
#define CONFIG_MACH_TYPE 3036
|
|
|
|
/*
|
|
* High Level Configuration Options (easy to change)
|
|
*/
|
|
|
|
/*
|
|
* TEXT_BASE needs to be below 16MiB, since this area is scrubbed
|
|
* for DDR ECC byte filling in the SPL before loading the main
|
|
* U-Boot into it.
|
|
*/
|
|
|
|
/* I2C */
|
|
#define CONFIG_SYS_I2C_LEGACY
|
|
#define CONFIG_SYS_I2C_MVTWSI
|
|
#define CONFIG_I2C_MVTWSI_BASE0 MVEBU_TWSI_BASE
|
|
#define CONFIG_SYS_I2C_SLAVE 0x0
|
|
#define CONFIG_SYS_I2C_SPEED 100000
|
|
|
|
/* PCIe support */
|
|
#ifndef CONFIG_SPL_BUILD
|
|
#define CONFIG_PCI_SCAN_SHOW
|
|
#endif
|
|
|
|
/* USB/EHCI/XHCI configuration */
|
|
#define CONFIG_EHCI_IS_TDI
|
|
|
|
/*
|
|
* mv-common.h should be defined after CMD configs since it used them
|
|
* to enable certain macros
|
|
*/
|
|
#include "mv-common.h"
|
|
|
|
/*
|
|
* Memory layout while starting into the bin_hdr via the
|
|
* BootROM:
|
|
*
|
|
* 0x4000.4000 - 0x4003.4000 headers space (192KiB)
|
|
* 0x4000.4030 bin_hdr start address
|
|
* 0x4003.4000 - 0x4004.7c00 BootROM memory allocations (15KiB)
|
|
* 0x4007.fffc BootROM stack top
|
|
*
|
|
* The address space between 0x4007.fffc and 0x400f.fff is not locked in
|
|
* L2 cache thus cannot be used.
|
|
*/
|
|
|
|
/* SPL */
|
|
/* Defines for SPL */
|
|
#define CONFIG_SPL_MAX_SIZE ((128 << 10) - 0x4030)
|
|
|
|
#define CONFIG_SPL_BSS_START_ADDR (0x40000000 + (128 << 10))
|
|
#define CONFIG_SPL_BSS_MAX_SIZE (16 << 10)
|
|
|
|
#ifdef CONFIG_SPL_BUILD
|
|
#define CONFIG_SYS_MALLOC_SIMPLE
|
|
#endif
|
|
|
|
#define CONFIG_SPL_STACK (0x40000000 + ((192 - 16) << 10))
|
|
#define CONFIG_SPL_BOOTROM_SAVE (CONFIG_SPL_STACK + 4)
|
|
|
|
/* DS414 bus width is 32bits */
|
|
#define CONFIG_DDR_32BIT
|
|
|
|
/* Default Environment */
|
|
#define CONFIG_LOADADDR 0x80000
|
|
#define CONFIG_BOOTCOMMAND \
|
|
"sf probe; " \
|
|
"sf read ${loadaddr} 0xd0000 0x2d0000; " \
|
|
"sf read ${ramdisk_addr_r} 0x3a0000 0x430000; " \
|
|
"bootm ${loadaddr} ${ramdisk_addr_r}"
|
|
|
|
#define CONFIG_EXTRA_ENV_SETTINGS \
|
|
"initrd_high=0xffffffff\0" \
|
|
"ramdisk_addr_r=0x8000000\0" \
|
|
"usb0Mode=host\0usb1Mode=host\0usb2Mode=device\0" \
|
|
"ethmtu=1500\0eth1mtu=1500\0" \
|
|
"update_uboot=sf probe; dhcp; " \
|
|
"mw.b ${loadaddr} 0x0 0xd0000; " \
|
|
"tftpboot ${loadaddr} u-boot-spl.kwb; " \
|
|
"sf update ${loadaddr} 0x0 0xd0000\0"
|
|
|
|
|
|
/* increase autoneg timeout, my NIC sucks */
|
|
#define PHY_ANEG_TIMEOUT 16000
|
|
|
|
#endif /* _CONFIG_SYNOLOGY_DS414_H */
|