mirror of
https://github.com/AsahiLinux/u-boot
synced 2024-12-05 11:00:15 +00:00
7601686c60
Remove CONFIG_P1010RDB_PA and CONFIG_P1010RDB_PB and split TARGET_P1010RDB to TARGET_P1010RDB_PA and TARGET_P1010RDB_PB in Kconfig. Signed-off-by: York Sun <york.sun@nxp.com>
571 lines
13 KiB
C
571 lines
13 KiB
C
/*
|
|
* Copyright 2010-2011 Freescale Semiconductor, Inc.
|
|
*
|
|
* SPDX-License-Identifier: GPL-2.0+
|
|
*/
|
|
|
|
#include <common.h>
|
|
#include <asm/processor.h>
|
|
#include <asm/mmu.h>
|
|
#include <asm/cache.h>
|
|
#include <asm/immap_85xx.h>
|
|
#include <asm/io.h>
|
|
#include <miiphy.h>
|
|
#include <libfdt.h>
|
|
#include <fdt_support.h>
|
|
#include <fsl_mdio.h>
|
|
#include <tsec.h>
|
|
#include <mmc.h>
|
|
#include <netdev.h>
|
|
#include <pci.h>
|
|
#include <asm/fsl_serdes.h>
|
|
#include <fsl_ifc.h>
|
|
#include <asm/fsl_pci.h>
|
|
#include <hwconfig.h>
|
|
#include <i2c.h>
|
|
|
|
DECLARE_GLOBAL_DATA_PTR;
|
|
|
|
#define GPIO4_PCIE_RESET_SET 0x08000000
|
|
#define MUX_CPLD_CAN_UART 0x00
|
|
#define MUX_CPLD_TDM 0x01
|
|
#define MUX_CPLD_SPICS0_FLASH 0x00
|
|
#define MUX_CPLD_SPICS0_SLIC 0x02
|
|
#define PMUXCR1_IFC_MASK 0x00ffff00
|
|
#define PMUXCR1_SDHC_MASK 0x00fff000
|
|
#define PMUXCR1_SDHC_ENABLE 0x00555000
|
|
|
|
enum {
|
|
MUX_TYPE_IFC,
|
|
MUX_TYPE_SDHC,
|
|
MUX_TYPE_SPIFLASH,
|
|
MUX_TYPE_TDM,
|
|
MUX_TYPE_CAN,
|
|
MUX_TYPE_CS0_NOR,
|
|
MUX_TYPE_CS0_NAND,
|
|
};
|
|
|
|
enum {
|
|
I2C_READ_BANK,
|
|
I2C_READ_PCB_VER,
|
|
};
|
|
|
|
static uint sd_ifc_mux;
|
|
|
|
struct cpld_data {
|
|
u8 cpld_ver; /* cpld revision */
|
|
#if defined(CONFIG_TARGET_P1010RDB_PA)
|
|
u8 pcba_ver; /* pcb revision number */
|
|
u8 twindie_ddr3;
|
|
u8 res1[6];
|
|
u8 bank_sel; /* NOR Flash bank */
|
|
u8 res2[5];
|
|
u8 usb2_sel;
|
|
u8 res3[1];
|
|
u8 porsw_sel;
|
|
u8 tdm_can_sel;
|
|
u8 spi_cs0_sel; /* SPI CS0 SLIC/SPI Flash */
|
|
u8 por0; /* POR Options */
|
|
u8 por1; /* POR Options */
|
|
u8 por2; /* POR Options */
|
|
u8 por3; /* POR Options */
|
|
#elif defined(CONFIG_TARGET_P1010RDB_PB)
|
|
u8 rom_loc;
|
|
#endif
|
|
};
|
|
|
|
int board_early_init_f(void)
|
|
{
|
|
ccsr_gpio_t *pgpio = (void *)(CONFIG_SYS_MPC85xx_GPIO_ADDR);
|
|
struct fsl_ifc ifc = {(void *)CONFIG_SYS_IFC_ADDR, (void *)NULL};
|
|
/* Clock configuration to access CPLD using IFC(GPCM) */
|
|
setbits_be32(&ifc.gregs->ifc_gcr, 1 << IFC_GCR_TBCTL_TRN_TIME_SHIFT);
|
|
/*
|
|
* Reset PCIe slots via GPIO4
|
|
*/
|
|
setbits_be32(&pgpio->gpdir, GPIO4_PCIE_RESET_SET);
|
|
setbits_be32(&pgpio->gpdat, GPIO4_PCIE_RESET_SET);
|
|
|
|
return 0;
|
|
}
|
|
|
|
int board_early_init_r(void)
|
|
{
|
|
const unsigned int flashbase = CONFIG_SYS_FLASH_BASE;
|
|
int flash_esel = find_tlb_idx((void *)flashbase, 1);
|
|
|
|
/*
|
|
* Remap Boot flash region to caching-inhibited
|
|
* so that flash can be erased properly.
|
|
*/
|
|
|
|
/* Flush d-cache and invalidate i-cache of any FLASH data */
|
|
flush_dcache();
|
|
invalidate_icache();
|
|
|
|
if (flash_esel == -1) {
|
|
/* very unlikely unless something is messed up */
|
|
puts("Error: Could not find TLB for FLASH BASE\n");
|
|
flash_esel = 2; /* give our best effort to continue */
|
|
} else {
|
|
/* invalidate existing TLB entry for flash */
|
|
disable_tlb(flash_esel);
|
|
}
|
|
|
|
set_tlb(1, flashbase, CONFIG_SYS_FLASH_BASE_PHYS,
|
|
MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G,
|
|
0, flash_esel, BOOKE_PAGESZ_16M, 1);
|
|
|
|
set_tlb(1, flashbase + 0x1000000,
|
|
CONFIG_SYS_FLASH_BASE_PHYS + 0x1000000,
|
|
MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G,
|
|
0, flash_esel+1, BOOKE_PAGESZ_16M, 1);
|
|
return 0;
|
|
}
|
|
|
|
#ifdef CONFIG_PCI
|
|
void pci_init_board(void)
|
|
{
|
|
fsl_pcie_init_board(0);
|
|
}
|
|
#endif /* ifdef CONFIG_PCI */
|
|
|
|
int config_board_mux(int ctrl_type)
|
|
{
|
|
ccsr_gur_t __iomem *gur = (void *)(CONFIG_SYS_MPC85xx_GUTS_ADDR);
|
|
u8 tmp;
|
|
|
|
#if defined(CONFIG_TARGET_P1010RDB_PA)
|
|
struct cpld_data *cpld_data = (void *)(CONFIG_SYS_CPLD_BASE);
|
|
|
|
switch (ctrl_type) {
|
|
case MUX_TYPE_IFC:
|
|
i2c_set_bus_num(I2C_PCA9557_BUS_NUM);
|
|
tmp = 0xf0;
|
|
i2c_write(I2C_PCA9557_ADDR1, 3, 1, &tmp, 1);
|
|
tmp = 0x01;
|
|
i2c_write(I2C_PCA9557_ADDR1, 1, 1, &tmp, 1);
|
|
sd_ifc_mux = MUX_TYPE_IFC;
|
|
clrbits_be32(&gur->pmuxcr, PMUXCR1_IFC_MASK);
|
|
break;
|
|
case MUX_TYPE_SDHC:
|
|
i2c_set_bus_num(I2C_PCA9557_BUS_NUM);
|
|
tmp = 0xf0;
|
|
i2c_write(I2C_PCA9557_ADDR1, 3, 1, &tmp, 1);
|
|
tmp = 0x05;
|
|
i2c_write(I2C_PCA9557_ADDR1, 1, 1, &tmp, 1);
|
|
sd_ifc_mux = MUX_TYPE_SDHC;
|
|
clrsetbits_be32(&gur->pmuxcr, PMUXCR1_SDHC_MASK,
|
|
PMUXCR1_SDHC_ENABLE);
|
|
break;
|
|
case MUX_TYPE_SPIFLASH:
|
|
out_8(&cpld_data->spi_cs0_sel, MUX_CPLD_SPICS0_FLASH);
|
|
break;
|
|
case MUX_TYPE_TDM:
|
|
out_8(&cpld_data->tdm_can_sel, MUX_CPLD_TDM);
|
|
out_8(&cpld_data->spi_cs0_sel, MUX_CPLD_SPICS0_SLIC);
|
|
break;
|
|
case MUX_TYPE_CAN:
|
|
out_8(&cpld_data->tdm_can_sel, MUX_CPLD_CAN_UART);
|
|
break;
|
|
default:
|
|
break;
|
|
}
|
|
#elif defined(CONFIG_TARGET_P1010RDB_PB)
|
|
uint orig_bus = i2c_get_bus_num();
|
|
i2c_set_bus_num(I2C_PCA9557_BUS_NUM);
|
|
|
|
switch (ctrl_type) {
|
|
case MUX_TYPE_IFC:
|
|
i2c_read(I2C_PCA9557_ADDR2, 0, 1, &tmp, 1);
|
|
clrbits_8(&tmp, 0x04);
|
|
i2c_write(I2C_PCA9557_ADDR2, 1, 1, &tmp, 1);
|
|
i2c_read(I2C_PCA9557_ADDR2, 3, 1, &tmp, 1);
|
|
clrbits_8(&tmp, 0x04);
|
|
i2c_write(I2C_PCA9557_ADDR2, 3, 1, &tmp, 1);
|
|
sd_ifc_mux = MUX_TYPE_IFC;
|
|
clrbits_be32(&gur->pmuxcr, PMUXCR1_IFC_MASK);
|
|
break;
|
|
case MUX_TYPE_SDHC:
|
|
i2c_read(I2C_PCA9557_ADDR2, 0, 1, &tmp, 1);
|
|
setbits_8(&tmp, 0x04);
|
|
i2c_write(I2C_PCA9557_ADDR2, 1, 1, &tmp, 1);
|
|
i2c_read(I2C_PCA9557_ADDR2, 3, 1, &tmp, 1);
|
|
clrbits_8(&tmp, 0x04);
|
|
i2c_write(I2C_PCA9557_ADDR2, 3, 1, &tmp, 1);
|
|
sd_ifc_mux = MUX_TYPE_SDHC;
|
|
clrsetbits_be32(&gur->pmuxcr, PMUXCR1_SDHC_MASK,
|
|
PMUXCR1_SDHC_ENABLE);
|
|
break;
|
|
case MUX_TYPE_SPIFLASH:
|
|
i2c_read(I2C_PCA9557_ADDR2, 0, 1, &tmp, 1);
|
|
clrbits_8(&tmp, 0x80);
|
|
i2c_write(I2C_PCA9557_ADDR2, 1, 1, &tmp, 1);
|
|
i2c_read(I2C_PCA9557_ADDR2, 3, 1, &tmp, 1);
|
|
clrbits_8(&tmp, 0x80);
|
|
i2c_write(I2C_PCA9557_ADDR2, 3, 1, &tmp, 1);
|
|
break;
|
|
case MUX_TYPE_TDM:
|
|
i2c_read(I2C_PCA9557_ADDR2, 0, 1, &tmp, 1);
|
|
setbits_8(&tmp, 0x82);
|
|
i2c_write(I2C_PCA9557_ADDR2, 1, 1, &tmp, 1);
|
|
i2c_read(I2C_PCA9557_ADDR2, 3, 1, &tmp, 1);
|
|
clrbits_8(&tmp, 0x82);
|
|
i2c_write(I2C_PCA9557_ADDR2, 3, 1, &tmp, 1);
|
|
break;
|
|
case MUX_TYPE_CAN:
|
|
i2c_read(I2C_PCA9557_ADDR2, 0, 1, &tmp, 1);
|
|
clrbits_8(&tmp, 0x02);
|
|
i2c_write(I2C_PCA9557_ADDR2, 1, 1, &tmp, 1);
|
|
i2c_read(I2C_PCA9557_ADDR2, 3, 1, &tmp, 1);
|
|
clrbits_8(&tmp, 0x02);
|
|
i2c_write(I2C_PCA9557_ADDR2, 3, 1, &tmp, 1);
|
|
break;
|
|
case MUX_TYPE_CS0_NOR:
|
|
i2c_read(I2C_PCA9557_ADDR2, 0, 1, &tmp, 1);
|
|
clrbits_8(&tmp, 0x08);
|
|
i2c_write(I2C_PCA9557_ADDR2, 1, 1, &tmp, 1);
|
|
i2c_read(I2C_PCA9557_ADDR2, 3, 1, &tmp, 1);
|
|
clrbits_8(&tmp, 0x08);
|
|
i2c_write(I2C_PCA9557_ADDR2, 3, 1, &tmp, 1);
|
|
break;
|
|
case MUX_TYPE_CS0_NAND:
|
|
i2c_read(I2C_PCA9557_ADDR2, 0, 1, &tmp, 1);
|
|
setbits_8(&tmp, 0x08);
|
|
i2c_write(I2C_PCA9557_ADDR2, 1, 1, &tmp, 1);
|
|
i2c_read(I2C_PCA9557_ADDR2, 3, 1, &tmp, 1);
|
|
clrbits_8(&tmp, 0x08);
|
|
i2c_write(I2C_PCA9557_ADDR2, 3, 1, &tmp, 1);
|
|
break;
|
|
default:
|
|
break;
|
|
}
|
|
i2c_set_bus_num(orig_bus);
|
|
#endif
|
|
return 0;
|
|
}
|
|
|
|
#ifdef CONFIG_TARGET_P1010RDB_PB
|
|
int i2c_pca9557_read(int type)
|
|
{
|
|
u8 val;
|
|
|
|
i2c_set_bus_num(I2C_PCA9557_BUS_NUM);
|
|
i2c_read(I2C_PCA9557_ADDR2, 0, 1, &val, 1);
|
|
|
|
switch (type) {
|
|
case I2C_READ_BANK:
|
|
val = (val & 0x10) >> 4;
|
|
break;
|
|
case I2C_READ_PCB_VER:
|
|
val = ((val & 0x60) >> 5) + 1;
|
|
break;
|
|
default:
|
|
break;
|
|
}
|
|
|
|
return val;
|
|
}
|
|
#endif
|
|
|
|
int checkboard(void)
|
|
{
|
|
struct cpu_type *cpu;
|
|
struct cpld_data *cpld_data = (void *)(CONFIG_SYS_CPLD_BASE);
|
|
u8 val;
|
|
|
|
cpu = gd->arch.cpu;
|
|
#if defined(CONFIG_TARGET_P1010RDB_PA)
|
|
printf("Board: %sRDB-PA, ", cpu->name);
|
|
#elif defined(CONFIG_TARGET_P1010RDB_PB)
|
|
printf("Board: %sRDB-PB, ", cpu->name);
|
|
i2c_set_bus_num(I2C_PCA9557_BUS_NUM);
|
|
i2c_init(CONFIG_SYS_FSL_I2C_SPEED, CONFIG_SYS_FSL_I2C_SLAVE);
|
|
val = 0x0; /* no polarity inversion */
|
|
i2c_write(I2C_PCA9557_ADDR2, 2, 1, &val, 1);
|
|
#endif
|
|
|
|
#ifdef CONFIG_SDCARD
|
|
/* switch to IFC to read info from CPLD */
|
|
config_board_mux(MUX_TYPE_IFC);
|
|
#endif
|
|
|
|
#if defined(CONFIG_TARGET_P1010RDB_PA)
|
|
val = (in_8(&cpld_data->pcba_ver) & 0xf);
|
|
printf("PCB: v%x.0\n", val);
|
|
#elif defined(CONFIG_TARGET_P1010RDB_PB)
|
|
val = in_8(&cpld_data->cpld_ver);
|
|
printf("CPLD: v%x.%x, ", val >> 4, val & 0xf);
|
|
printf("PCB: v%x.0, ", i2c_pca9557_read(I2C_READ_PCB_VER));
|
|
val = in_8(&cpld_data->rom_loc) & 0xf;
|
|
puts("Boot from: ");
|
|
switch (val) {
|
|
case 0xf:
|
|
config_board_mux(MUX_TYPE_CS0_NOR);
|
|
printf("NOR vBank%d\n", i2c_pca9557_read(I2C_READ_BANK));
|
|
break;
|
|
case 0xe:
|
|
puts("SDHC\n");
|
|
val = 0x60; /* set pca9557 pin input/output */
|
|
i2c_write(I2C_PCA9557_ADDR2, 3, 1, &val, 1);
|
|
break;
|
|
case 0x5:
|
|
config_board_mux(MUX_TYPE_IFC);
|
|
config_board_mux(MUX_TYPE_CS0_NAND);
|
|
puts("NAND\n");
|
|
break;
|
|
case 0x6:
|
|
config_board_mux(MUX_TYPE_IFC);
|
|
puts("SPI\n");
|
|
break;
|
|
default:
|
|
puts("unknown\n");
|
|
break;
|
|
}
|
|
#endif
|
|
return 0;
|
|
}
|
|
|
|
int board_eth_init(bd_t *bis)
|
|
{
|
|
#ifdef CONFIG_TSEC_ENET
|
|
struct fsl_pq_mdio_info mdio_info;
|
|
struct tsec_info_struct tsec_info[4];
|
|
struct cpu_type *cpu;
|
|
int num = 0;
|
|
|
|
cpu = gd->arch.cpu;
|
|
|
|
#ifdef CONFIG_TSEC1
|
|
SET_STD_TSEC_INFO(tsec_info[num], 1);
|
|
num++;
|
|
#endif
|
|
#ifdef CONFIG_TSEC2
|
|
SET_STD_TSEC_INFO(tsec_info[num], 2);
|
|
num++;
|
|
#endif
|
|
#ifdef CONFIG_TSEC3
|
|
/* P1014 and it's derivatives do not support eTSEC3 */
|
|
if (cpu->soc_ver != SVR_P1014) {
|
|
SET_STD_TSEC_INFO(tsec_info[num], 3);
|
|
num++;
|
|
}
|
|
#endif
|
|
if (!num) {
|
|
printf("No TSECs initialized\n");
|
|
return 0;
|
|
}
|
|
|
|
mdio_info.regs = (struct tsec_mii_mng *)CONFIG_SYS_MDIO_BASE_ADDR;
|
|
mdio_info.name = DEFAULT_MII_NAME;
|
|
|
|
fsl_pq_mdio_init(bis, &mdio_info);
|
|
|
|
tsec_eth_init(bis, tsec_info, num);
|
|
#endif
|
|
|
|
return pci_eth_init(bis);
|
|
}
|
|
|
|
#if defined(CONFIG_OF_BOARD_SETUP)
|
|
void fdt_del_flexcan(void *blob)
|
|
{
|
|
int nodeoff = 0;
|
|
|
|
while ((nodeoff = fdt_node_offset_by_compatible(blob, 0,
|
|
"fsl,p1010-flexcan")) >= 0) {
|
|
fdt_del_node(blob, nodeoff);
|
|
}
|
|
}
|
|
|
|
void fdt_del_spi_flash(void *blob)
|
|
{
|
|
int nodeoff = 0;
|
|
|
|
while ((nodeoff = fdt_node_offset_by_compatible(blob, 0,
|
|
"spansion,s25sl12801")) >= 0) {
|
|
fdt_del_node(blob, nodeoff);
|
|
}
|
|
}
|
|
|
|
void fdt_del_spi_slic(void *blob)
|
|
{
|
|
int nodeoff = 0;
|
|
|
|
while ((nodeoff = fdt_node_offset_by_compatible(blob, 0,
|
|
"zarlink,le88266")) >= 0) {
|
|
fdt_del_node(blob, nodeoff);
|
|
}
|
|
}
|
|
|
|
void fdt_del_tdm(void *blob)
|
|
{
|
|
int nodeoff = 0;
|
|
|
|
while ((nodeoff = fdt_node_offset_by_compatible(blob, 0,
|
|
"fsl,starlite-tdm")) >= 0) {
|
|
fdt_del_node(blob, nodeoff);
|
|
}
|
|
}
|
|
|
|
void fdt_del_sdhc(void *blob)
|
|
{
|
|
int nodeoff = 0;
|
|
|
|
while ((nodeoff = fdt_node_offset_by_compatible(blob, 0,
|
|
"fsl,esdhc")) >= 0) {
|
|
fdt_del_node(blob, nodeoff);
|
|
}
|
|
}
|
|
|
|
void fdt_del_ifc(void *blob)
|
|
{
|
|
int nodeoff = 0;
|
|
|
|
while ((nodeoff = fdt_node_offset_by_compatible(blob, 0,
|
|
"fsl,ifc")) >= 0) {
|
|
fdt_del_node(blob, nodeoff);
|
|
}
|
|
}
|
|
|
|
void fdt_disable_uart1(void *blob)
|
|
{
|
|
int nodeoff;
|
|
|
|
nodeoff = fdt_node_offset_by_compat_reg(blob, "fsl,ns16550",
|
|
CONFIG_SYS_NS16550_COM2);
|
|
|
|
if (nodeoff > 0) {
|
|
fdt_status_disabled(blob, nodeoff);
|
|
} else {
|
|
printf("WARNING unable to set status for fsl,ns16550 "
|
|
"uart1: %s\n", fdt_strerror(nodeoff));
|
|
}
|
|
}
|
|
|
|
int ft_board_setup(void *blob, bd_t *bd)
|
|
{
|
|
phys_addr_t base;
|
|
phys_size_t size;
|
|
struct cpu_type *cpu;
|
|
|
|
cpu = gd->arch.cpu;
|
|
|
|
ft_cpu_setup(blob, bd);
|
|
|
|
base = getenv_bootm_low();
|
|
size = getenv_bootm_size();
|
|
|
|
#if defined(CONFIG_PCI)
|
|
FT_FSL_PCI_SETUP;
|
|
#endif
|
|
|
|
fdt_fixup_memory(blob, (u64)base, (u64)size);
|
|
|
|
#if defined(CONFIG_HAS_FSL_DR_USB)
|
|
fsl_fdt_fixup_dr_usb(blob, bd);
|
|
#endif
|
|
|
|
/* P1014 and it's derivatives don't support CAN and eTSEC3 */
|
|
if (cpu->soc_ver == SVR_P1014) {
|
|
fdt_del_flexcan(blob);
|
|
fdt_del_node_and_alias(blob, "ethernet2");
|
|
}
|
|
|
|
/* Delete IFC node as IFC pins are multiplexing with SDHC */
|
|
if (sd_ifc_mux != MUX_TYPE_IFC)
|
|
fdt_del_ifc(blob);
|
|
else
|
|
fdt_del_sdhc(blob);
|
|
|
|
if (hwconfig_subarg_cmp("fsl_p1010mux", "tdm_can", "can")) {
|
|
fdt_del_tdm(blob);
|
|
fdt_del_spi_slic(blob);
|
|
} else if (hwconfig_subarg_cmp("fsl_p1010mux", "tdm_can", "tdm")) {
|
|
fdt_del_flexcan(blob);
|
|
fdt_del_spi_flash(blob);
|
|
fdt_disable_uart1(blob);
|
|
} else {
|
|
/*
|
|
* If we don't set fsl_p1010mux:tdm_can to "can" or "tdm"
|
|
* explicitly, defaultly spi_cs_sel to spi-flash instead of
|
|
* to tdm/slic.
|
|
*/
|
|
fdt_del_tdm(blob);
|
|
fdt_del_flexcan(blob);
|
|
fdt_disable_uart1(blob);
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
#endif
|
|
|
|
#ifdef CONFIG_SDCARD
|
|
int board_mmc_init(bd_t *bis)
|
|
{
|
|
config_board_mux(MUX_TYPE_SDHC);
|
|
return -1;
|
|
}
|
|
#else
|
|
void board_reset(void)
|
|
{
|
|
/* mux to IFC to enable CPLD for reset */
|
|
if (sd_ifc_mux != MUX_TYPE_IFC)
|
|
config_board_mux(MUX_TYPE_IFC);
|
|
}
|
|
#endif
|
|
|
|
|
|
int misc_init_r(void)
|
|
{
|
|
ccsr_gur_t *gur = (void *)(CONFIG_SYS_MPC85xx_GUTS_ADDR);
|
|
|
|
if (hwconfig_subarg_cmp("fsl_p1010mux", "tdm_can", "can")) {
|
|
clrbits_be32(&gur->pmuxcr, MPC85xx_PMUXCR_CAN1_TDM |
|
|
MPC85xx_PMUXCR_CAN1_UART |
|
|
MPC85xx_PMUXCR_CAN2_TDM |
|
|
MPC85xx_PMUXCR_CAN2_UART);
|
|
config_board_mux(MUX_TYPE_CAN);
|
|
} else if (hwconfig_subarg_cmp("fsl_p1010mux", "tdm_can", "tdm")) {
|
|
clrbits_be32(&gur->pmuxcr, MPC85xx_PMUXCR_CAN2_UART |
|
|
MPC85xx_PMUXCR_CAN1_UART);
|
|
setbits_be32(&gur->pmuxcr, MPC85xx_PMUXCR_CAN2_TDM |
|
|
MPC85xx_PMUXCR_CAN1_TDM);
|
|
clrbits_be32(&gur->pmuxcr2, MPC85xx_PMUXCR2_UART_GPIO);
|
|
setbits_be32(&gur->pmuxcr2, MPC85xx_PMUXCR2_UART_TDM);
|
|
config_board_mux(MUX_TYPE_TDM);
|
|
} else {
|
|
/* defaultly spi_cs_sel to flash */
|
|
config_board_mux(MUX_TYPE_SPIFLASH);
|
|
}
|
|
|
|
if (hwconfig("esdhc"))
|
|
config_board_mux(MUX_TYPE_SDHC);
|
|
else if (hwconfig("ifc"))
|
|
config_board_mux(MUX_TYPE_IFC);
|
|
|
|
#ifdef CONFIG_TARGET_P1010RDB_PB
|
|
setbits_be32(&gur->pmuxcr2, MPC85xx_PMUXCR2_GPIO01_DRVVBUS);
|
|
#endif
|
|
return 0;
|
|
}
|
|
|
|
static int pin_mux_cmd(cmd_tbl_t *cmdtp, int flag, int argc,
|
|
char * const argv[])
|
|
{
|
|
if (argc < 2)
|
|
return CMD_RET_USAGE;
|
|
if (strcmp(argv[1], "ifc") == 0)
|
|
config_board_mux(MUX_TYPE_IFC);
|
|
else if (strcmp(argv[1], "sdhc") == 0)
|
|
config_board_mux(MUX_TYPE_SDHC);
|
|
else
|
|
return CMD_RET_USAGE;
|
|
return 0;
|
|
}
|
|
|
|
U_BOOT_CMD(
|
|
mux, 2, 0, pin_mux_cmd,
|
|
"configure multiplexing pin for IFC/SDHC bus in runtime",
|
|
"bus_type (e.g. mux sdhc)"
|
|
);
|