mirror of
https://github.com/AsahiLinux/u-boot
synced 2024-12-05 11:00:15 +00:00
869bf86811
The current 'cpld reset' will just write global_rst register but couldn't switch to NOR boot if the board's switches are for NAND/SD boot. So need to write rcw source registers for NOR boot as well. Signed-off-by: Gong Qianyu <Qianyu.Gong@nxp.com> Reviewed-by: York Sun <york.sun@nxp.com>
174 lines
3.6 KiB
C
174 lines
3.6 KiB
C
/*
|
|
* Copyright 2015 Freescale Semiconductor
|
|
*
|
|
* SPDX-License-Identifier: GPL-2.0+
|
|
*
|
|
* Freescale LS1043ARDB board-specific CPLD controlling supports.
|
|
*/
|
|
|
|
#include <common.h>
|
|
#include <command.h>
|
|
#include <asm/io.h>
|
|
#include "cpld.h"
|
|
|
|
u8 cpld_read(unsigned int reg)
|
|
{
|
|
void *p = (void *)CONFIG_SYS_CPLD_BASE;
|
|
|
|
return in_8(p + reg);
|
|
}
|
|
|
|
void cpld_write(unsigned int reg, u8 value)
|
|
{
|
|
void *p = (void *)CONFIG_SYS_CPLD_BASE;
|
|
|
|
out_8(p + reg, value);
|
|
}
|
|
|
|
/* Set the boot bank to the alternate bank */
|
|
void cpld_set_altbank(void)
|
|
{
|
|
u16 reg = CPLD_CFG_RCW_SRC_NOR;
|
|
u8 reg4 = CPLD_READ(soft_mux_on);
|
|
u8 reg5 = (u8)(reg >> 1);
|
|
u8 reg6 = (u8)(reg & 1);
|
|
u8 reg7 = CPLD_READ(vbank);
|
|
|
|
cpld_rev_bit(®5);
|
|
|
|
CPLD_WRITE(soft_mux_on, reg4 | CPLD_SW_MUX_BANK_SEL | 1);
|
|
|
|
CPLD_WRITE(cfg_rcw_src1, reg5);
|
|
CPLD_WRITE(cfg_rcw_src2, reg6);
|
|
|
|
reg7 = (reg7 & ~CPLD_BANK_SEL_MASK) | CPLD_BANK_SEL_ALTBANK;
|
|
CPLD_WRITE(vbank, reg7);
|
|
|
|
CPLD_WRITE(system_rst, 1);
|
|
}
|
|
|
|
/* Set the boot bank to the default bank */
|
|
void cpld_set_defbank(void)
|
|
{
|
|
u16 reg = CPLD_CFG_RCW_SRC_NOR;
|
|
u8 reg4 = CPLD_READ(soft_mux_on);
|
|
u8 reg5 = (u8)(reg >> 1);
|
|
u8 reg6 = (u8)(reg & 1);
|
|
|
|
cpld_rev_bit(®5);
|
|
|
|
CPLD_WRITE(soft_mux_on, reg4 | CPLD_SW_MUX_BANK_SEL | 1);
|
|
|
|
CPLD_WRITE(cfg_rcw_src1, reg5);
|
|
CPLD_WRITE(cfg_rcw_src2, reg6);
|
|
|
|
CPLD_WRITE(vbank, 0);
|
|
|
|
CPLD_WRITE(system_rst, 1);
|
|
}
|
|
|
|
void cpld_set_nand(void)
|
|
{
|
|
u16 reg = CPLD_CFG_RCW_SRC_NAND;
|
|
u8 reg5 = (u8)(reg >> 1);
|
|
u8 reg6 = (u8)(reg & 1);
|
|
|
|
cpld_rev_bit(®5);
|
|
|
|
CPLD_WRITE(soft_mux_on, 1);
|
|
|
|
CPLD_WRITE(cfg_rcw_src1, reg5);
|
|
CPLD_WRITE(cfg_rcw_src2, reg6);
|
|
|
|
CPLD_WRITE(system_rst, 1);
|
|
}
|
|
|
|
void cpld_set_sd(void)
|
|
{
|
|
u16 reg = CPLD_CFG_RCW_SRC_SD;
|
|
u8 reg5 = (u8)(reg >> 1);
|
|
u8 reg6 = (u8)(reg & 1);
|
|
|
|
cpld_rev_bit(®5);
|
|
|
|
CPLD_WRITE(soft_mux_on, 1);
|
|
|
|
CPLD_WRITE(cfg_rcw_src1, reg5);
|
|
CPLD_WRITE(cfg_rcw_src2, reg6);
|
|
|
|
CPLD_WRITE(system_rst, 1);
|
|
}
|
|
#ifdef DEBUG
|
|
static void cpld_dump_regs(void)
|
|
{
|
|
printf("cpld_ver = %x\n", CPLD_READ(cpld_ver));
|
|
printf("cpld_ver_sub = %x\n", CPLD_READ(cpld_ver_sub));
|
|
printf("pcba_ver = %x\n", CPLD_READ(pcba_ver));
|
|
printf("soft_mux_on = %x\n", CPLD_READ(soft_mux_on));
|
|
printf("cfg_rcw_src1 = %x\n", CPLD_READ(cfg_rcw_src1));
|
|
printf("cfg_rcw_src2 = %x\n", CPLD_READ(cfg_rcw_src2));
|
|
printf("vbank = %x\n", CPLD_READ(vbank));
|
|
printf("sysclk_sel = %x\n", CPLD_READ(sysclk_sel));
|
|
printf("uart_sel = %x\n", CPLD_READ(uart_sel));
|
|
printf("sd1refclk_sel = %x\n", CPLD_READ(sd1refclk_sel));
|
|
printf("tdmclk_mux_sel = %x\n", CPLD_READ(tdmclk_mux_sel));
|
|
printf("sdhc_spics_sel = %x\n", CPLD_READ(sdhc_spics_sel));
|
|
printf("status_led = %x\n", CPLD_READ(status_led));
|
|
putc('\n');
|
|
}
|
|
#endif
|
|
|
|
void cpld_rev_bit(unsigned char *value)
|
|
{
|
|
u8 rev_val, val;
|
|
int i;
|
|
|
|
val = *value;
|
|
rev_val = val & 1;
|
|
for (i = 1; i <= 7; i++) {
|
|
val >>= 1;
|
|
rev_val <<= 1;
|
|
rev_val |= val & 1;
|
|
}
|
|
|
|
*value = rev_val;
|
|
}
|
|
|
|
int do_cpld(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
|
|
{
|
|
int rc = 0;
|
|
|
|
if (argc <= 1)
|
|
return cmd_usage(cmdtp);
|
|
|
|
if (strcmp(argv[1], "reset") == 0) {
|
|
if (strcmp(argv[2], "altbank") == 0)
|
|
cpld_set_altbank();
|
|
else if (strcmp(argv[2], "nand") == 0)
|
|
cpld_set_nand();
|
|
else if (strcmp(argv[2], "sd") == 0)
|
|
cpld_set_sd();
|
|
else
|
|
cpld_set_defbank();
|
|
#ifdef DEBUG
|
|
} else if (strcmp(argv[1], "dump") == 0) {
|
|
cpld_dump_regs();
|
|
#endif
|
|
} else {
|
|
rc = cmd_usage(cmdtp);
|
|
}
|
|
|
|
return rc;
|
|
}
|
|
|
|
U_BOOT_CMD(
|
|
cpld, CONFIG_SYS_MAXARGS, 1, do_cpld,
|
|
"Reset the board or alternate bank",
|
|
"reset: reset to default bank\n"
|
|
"cpld reset altbank: reset to alternate bank\n"
|
|
"cpld reset nand: reset to boot from NAND flash\n"
|
|
"cpld reset sd: reset to boot from SD card\n"
|
|
#ifdef DEBUG
|
|
"cpld dump - display the CPLD registers\n"
|
|
#endif
|
|
);
|