mirror of
https://github.com/AsahiLinux/u-boot
synced 2024-11-15 09:27:35 +00:00
3fdd09f90f
Thecus N2350 is a NAS based on Marvell Armada 385 SoC. Specification: - Processor: Marvel MV88F6820 Dual Core at 1GHz - 1 GiB DDR4 RAM - 4MB Macronix mx25l3205d SPI flash - 512MB Hynix H27U4G8F2DTR-BC NAND flash - I2C - 2x USB 3.0 - 1x GBE LAN port (PHY: Marvell 88E1510) - 2x SATA (hot swap slots) - 3x buttons - 10x LEDS - serial console Signed-off-by: Tony Dinh <mibodhi@gmail.com> Reviewed-by: Stefan Roese <sr@denx.de>
446 lines
8.2 KiB
Text
446 lines
8.2 KiB
Text
// SPDX-License-Identifier: (GPL-2.0 OR MIT)
|
|
/*
|
|
* Device Tree file for Thecus N2350 board
|
|
*
|
|
* Copyright (C) 2018-2023 Tony Dinh <mibodhi@gmail.com>
|
|
* Copyright (C) 2018 Manuel Jung <manuel.jung@hotmail.com>
|
|
*/
|
|
|
|
/dts-v1/;
|
|
#include <dt-bindings/input/input.h>
|
|
#include <dt-bindings/gpio/gpio.h>
|
|
#include "armada-385.dtsi"
|
|
|
|
/ {
|
|
model = "Thecus N2350";
|
|
compatible = "thecus,n2350", "marvell,armada385";
|
|
|
|
aliases {
|
|
ethernet0 = ð0;
|
|
};
|
|
|
|
chosen {
|
|
stdout-path = "serial0:115200n8";
|
|
};
|
|
|
|
memory {
|
|
device_type = "memory";
|
|
reg = <0x00000000 0x40000000>; /* 1GB */
|
|
};
|
|
|
|
soc {
|
|
ranges = <MBUS_ID(0xf0, 0x01) 0 0xf1000000 0x100000
|
|
MBUS_ID(0x01, 0x1d) 0 0xfff00000 0x100000
|
|
MBUS_ID(0x09, 0x19) 0 0xf1100000 0x10000
|
|
MBUS_ID(0x09, 0x15) 0 0xf1110000 0x10000
|
|
MBUS_ID(0x0c, 0x04) 0 0xf1200000 0x100000>;
|
|
|
|
};
|
|
|
|
usb3_0_phy: usb3_0_phy {
|
|
compatible = "usb-nop-xceiv";
|
|
vcc-supply = <&usb3_0_power>;
|
|
};
|
|
|
|
usb3_1_phy: usb3_1_phy {
|
|
compatible = "usb-nop-xceiv";
|
|
vcc-supply = <&usb3_1_power>;
|
|
};
|
|
|
|
gpio-keys {
|
|
compatible = "gpio-keys";
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
pinctrl-0 = <&pmx_power_button &pmx_copy_button &pmx_reset_button>;
|
|
pinctrl-names = "default";
|
|
|
|
button@1 {
|
|
label = "Power Button";
|
|
linux,code = <KEY_POWER>;
|
|
gpios = <&gpio1 17 GPIO_ACTIVE_HIGH>;
|
|
};
|
|
|
|
button@2 {
|
|
label = "Copy Button";
|
|
linux,code = <KEY_COPY>;
|
|
gpios = <&gpio1 20 GPIO_ACTIVE_HIGH>;
|
|
};
|
|
|
|
button@3 {
|
|
label = "Reset Button";
|
|
linux,code = <KEY_RESTART>;
|
|
gpios = <&gpio1 18 GPIO_ACTIVE_HIGH>;
|
|
};
|
|
};
|
|
|
|
gpio-leds {
|
|
compatible = "gpio-leds";
|
|
pinctrl-0 = <&pmx_sata1_white_led
|
|
&pmx_sata1_red_led
|
|
&pmx_sata2_white_led
|
|
&pmx_sata2_red_led
|
|
&pmx_sys_white_led
|
|
&pmx_sys_red_led
|
|
&pmx_pwr_blue_led
|
|
&pmx_pwr_red_led
|
|
&pmx_usb_white_led
|
|
&pmx_usb_red_led>;
|
|
|
|
pinctrl-names = "default";
|
|
|
|
white_sata1 {
|
|
label = "n2350:white:sata1";
|
|
gpios = <&gpio0 20 GPIO_ACTIVE_HIGH>;
|
|
linux,default-trigger = "ide-disk1";
|
|
};
|
|
|
|
red_sata1 {
|
|
label = "n2350:red:sata1";
|
|
gpios = <&gpio1 14 GPIO_ACTIVE_HIGH>;
|
|
};
|
|
|
|
white-sata2 {
|
|
label = "n2350:white:sata2";
|
|
gpios = <&gpio0 19 GPIO_ACTIVE_HIGH>;
|
|
};
|
|
|
|
red-sata2 {
|
|
label = "n2350:red:sata2";
|
|
gpios = <&gpio1 15 GPIO_ACTIVE_HIGH>;
|
|
};
|
|
|
|
white-sys {
|
|
label = "n2350:white:sys";
|
|
gpios = <&gpio0 14 GPIO_ACTIVE_HIGH>;
|
|
linux,default-trigger = "default-on";
|
|
};
|
|
|
|
red-sys {
|
|
label = "n2350:red:sys";
|
|
gpios = <&gpio0 15 GPIO_ACTIVE_HIGH>;
|
|
};
|
|
|
|
blue-pwr {
|
|
label = "n2350:blue:pwr";
|
|
gpios = <&gpio1 11 GPIO_ACTIVE_HIGH>;
|
|
};
|
|
|
|
red-pwr {
|
|
label = "n2350:red:pwr";
|
|
gpios = <&gpio0 18 GPIO_ACTIVE_HIGH>;
|
|
};
|
|
|
|
white-usb {
|
|
label = "n2350:white:usb";
|
|
gpios = <&gpio0 16 GPIO_ACTIVE_HIGH>;
|
|
};
|
|
|
|
red-usb {
|
|
label = "n2350:red:usb";
|
|
gpios = <&gpio0 17 GPIO_ACTIVE_HIGH>;
|
|
};
|
|
};
|
|
|
|
regulators {
|
|
compatible = "simple-bus";
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
|
|
usb3_0_power: regulator@1 {
|
|
compatible = "regulator-fixed";
|
|
reg = <1>;
|
|
regulator-name = "USB3_0_Power";
|
|
regulator-min-microvolt = <5000000>;
|
|
regulator-max-microvolt = <5000000>;
|
|
enable-active-high;
|
|
regulator-always-on;
|
|
regulator-boot-on;
|
|
gpio = <&gpio0 21 GPIO_ACTIVE_HIGH>;
|
|
};
|
|
|
|
usb3_1_power: regulator@2 {
|
|
compatible = "regulator-fixed";
|
|
reg = <1>;
|
|
regulator-name = "USB3_1_Power";
|
|
regulator-min-microvolt = <5000000>;
|
|
regulator-max-microvolt = <5000000>;
|
|
enable-active-high;
|
|
regulator-always-on;
|
|
regulator-boot-on;
|
|
gpio = <&gpio0 24 GPIO_ACTIVE_HIGH>;
|
|
};
|
|
|
|
reg_sata0: regulator@3 {
|
|
compatible = "regulator-fixed";
|
|
regulator-name = "pwr_en_sata0";
|
|
regulator-min-microvolt = <12000000>;
|
|
regulator-max-microvolt = <12000000>;
|
|
enable-active-high;
|
|
regulator-always-on;
|
|
regulator-boot-on;
|
|
gpio = <&gpio1 12 GPIO_ACTIVE_HIGH>;
|
|
};
|
|
|
|
reg_5v_sata0: v5-sata0 {
|
|
compatible = "regulator-fixed";
|
|
regulator-name = "v5.0-sata0";
|
|
regulator-min-microvolt = <5000000>;
|
|
regulator-max-microvolt = <5000000>;
|
|
vin-supply = <®_sata0>;
|
|
};
|
|
|
|
reg_12v_sata0: v12-sata0 {
|
|
compatible = "regulator-fixed";
|
|
regulator-name = "v12.0-sata0";
|
|
regulator-min-microvolt = <12000000>;
|
|
regulator-max-microvolt = <12000000>;
|
|
vin-supply = <®_sata0>;
|
|
};
|
|
|
|
reg_sata1: regulator@4 {
|
|
regulator-name = "pwr_en_sata1";
|
|
compatible = "regulator-fixed";
|
|
regulator-min-microvolt = <12000000>;
|
|
regulator-max-microvolt = <12000000>;
|
|
enable-active-high;
|
|
regulator-always-on;
|
|
regulator-boot-on;
|
|
gpio = <&gpio1 13 GPIO_ACTIVE_HIGH>;
|
|
};
|
|
|
|
reg_5v_sata1: v5-sata1 {
|
|
compatible = "regulator-fixed";
|
|
regulator-name = "v5.0-sata1";
|
|
regulator-min-microvolt = <5000000>;
|
|
regulator-max-microvolt = <5000000>;
|
|
vin-supply = <®_sata1>;
|
|
};
|
|
|
|
reg_12v_sata1: v12-sata1 {
|
|
compatible = "regulator-fixed";
|
|
regulator-name = "v12.0-sata1";
|
|
regulator-min-microvolt = <12000000>;
|
|
regulator-max-microvolt = <12000000>;
|
|
vin-supply = <®_sata1>;
|
|
};
|
|
|
|
};
|
|
|
|
gpio-poweroff {
|
|
compatible = "gpio-poweroff";
|
|
pinctrl-0 = <&pmx_pwr_off>;
|
|
pinctrl-names = "default";
|
|
gpios = <&gpio1 22 GPIO_ACTIVE_HIGH>;
|
|
};
|
|
|
|
};
|
|
|
|
&ahci0 {
|
|
status = "okay";
|
|
};
|
|
|
|
&bm {
|
|
status = "okay";
|
|
};
|
|
|
|
&bm_bppi {
|
|
status = "okay";
|
|
};
|
|
|
|
ð0 {
|
|
status = "okay";
|
|
phy = <&phy0>;
|
|
phy-mode = "sgmii";
|
|
buffer-manager = <&bm>;
|
|
bm,pool-long = <0>;
|
|
bm,pool-short = <1>;
|
|
};
|
|
|
|
&i2c0 {
|
|
status = "okay";
|
|
clock-frequency = <100000>;
|
|
};
|
|
|
|
&i2c1 {
|
|
status = "okay";
|
|
clock-frequency = <100000>;
|
|
};
|
|
|
|
&mdio {
|
|
phy0: ethernet-phy@0 {
|
|
reg = <1>;
|
|
};
|
|
};
|
|
|
|
&nand_controller {
|
|
status = "okay";
|
|
|
|
nand@0 {
|
|
status = "okay";
|
|
reg = <0>;
|
|
label = "pxa3xx_nand-0";
|
|
nand-rb = <0>;
|
|
marvell,nand-keep-config;
|
|
nand-on-flash-bbt;
|
|
nand-ecc-strength = <4>;
|
|
nand-ecc-step-size = <512>;
|
|
|
|
partitions {
|
|
compatible = "fixed-partitions";
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
|
|
partition@0 {
|
|
label = "rootfs";
|
|
reg = <0x00000000 0x20000000>;
|
|
};
|
|
|
|
};
|
|
};
|
|
};
|
|
|
|
&pciec {
|
|
status = "okay";
|
|
/*
|
|
* The two PCIe units are accessible through
|
|
* standard PCIe slots on the board.
|
|
*/
|
|
pcie@1,0 {
|
|
/* Port 0, Lane 0 */
|
|
status = "okay";
|
|
};
|
|
pcie@2,0 {
|
|
/* Port 1, Lane 0 */
|
|
status = "okay";
|
|
};
|
|
};
|
|
|
|
&pinctrl {
|
|
pinctrl-names = "default";
|
|
|
|
pmx_power_button: pmx-power-button {
|
|
marvell,pins = "mpp49";
|
|
marvell,function = "gpio";
|
|
};
|
|
|
|
pmx_copy_button: pmx-copy-button {
|
|
marvell,pins = "mpp52";
|
|
marvell,function = "gpio";
|
|
};
|
|
|
|
pmx_reset_button: pmx-reset-button {
|
|
marvell,pins = "mpp50";
|
|
marvell,function = "gpio";
|
|
};
|
|
|
|
pmx_sata1_white_led: pmx-sata1-white-led {
|
|
marvell,pins = "mpp20";
|
|
marvell,function = "gpio";
|
|
};
|
|
|
|
pmx_sata1_red_led: pmx-sata1-red-led {
|
|
marvell,pins = "mpp46";
|
|
marvell,function = "gpio";
|
|
};
|
|
|
|
pmx_sata2_white_led: pmx-sata2-white-led {
|
|
marvell,pins = "mpp19";
|
|
marvell,function = "gpio";
|
|
};
|
|
|
|
pmx_sata2_red_led: pmx-sata2-red-led {
|
|
marvell,pins = "mpp47";
|
|
marvell,function = "gpio";
|
|
};
|
|
|
|
pmx_sys_white_led: pmx-sys-white-led {
|
|
marvell,pins = "mpp14";
|
|
marvell,function = "gpio";
|
|
};
|
|
|
|
pmx_sys_red_led: pmx-sys-red-led {
|
|
marvell,pins = "mpp15";
|
|
marvell,function = "gpio";
|
|
};
|
|
|
|
pmx_buzzer: pmx-buzzer {
|
|
marvell,pins = "mpp51";
|
|
marvell,function = "gpio";
|
|
};
|
|
|
|
pmx_pwr_off: pmx-pwr-off {
|
|
marvell,pins = "mpp54";
|
|
marvell,function = "gpio";
|
|
};
|
|
|
|
pmx_pwr_blue_led: pmx-pwr-blue-led {
|
|
marvell,pins = "mpp43";
|
|
marvell,function = "gpio";
|
|
};
|
|
|
|
pmx_pwr_red_led: pmx-pwr-red-led {
|
|
marvell,pins = "mpp18";
|
|
marvell,function = "gpio";
|
|
};
|
|
|
|
pmx_usb_white_led: pmx-usb-white-led {
|
|
marvell,pins = "mpp16";
|
|
marvell,function = "gpio";
|
|
};
|
|
|
|
pmx_usb_red_led: pmx-usb-red-led {
|
|
marvell,pins = "mpp17";
|
|
marvell,function = "gpio";
|
|
};
|
|
};
|
|
|
|
&sdhci {
|
|
broken-cd;
|
|
wp-inverted;
|
|
bus-width = <8>;
|
|
status = "okay";
|
|
no-1-8-v;
|
|
};
|
|
|
|
&spi1 {
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&spi1_pins>;
|
|
status = "okay";
|
|
|
|
/* spi: 4M Flash Macronix MX25L3205D */
|
|
spi-flash@0 {
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
compatible = "macronix,mx25l3205d", "jedec,spi-nor";
|
|
reg = <0>;
|
|
|
|
spi-max-frequency = <108000000>;
|
|
spi-cpha;
|
|
|
|
partition@0 {
|
|
label = "u-boot";
|
|
reg = <0x00000000 0x00100000>;
|
|
};
|
|
|
|
partition@100000 {
|
|
label = "u-boot-env";
|
|
reg = <0x00100000 0x00010000>;
|
|
};
|
|
};
|
|
};
|
|
|
|
&uart0 {
|
|
status = "okay";
|
|
};
|
|
|
|
&usb0 {
|
|
status = "okay";
|
|
};
|
|
|
|
&usb3_0 {
|
|
status = "okay";
|
|
};
|
|
|
|
&usb3_1 {
|
|
status = "okay";
|
|
};
|