u-boot/cpu/arm926ejs/at91/at91sam9261_serial.c
Jean-Christophe PLAGNIOL-VILLARD 1332a2a069 at91sam9/at91cap: move common serial initialisation to cpu
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
2009-03-22 13:22:03 +01:00

76 lines
2 KiB
C

/*
* (C) Copyright 2007-2008
* Stelian Pop <stelian.pop@leadtechdesign.com>
* Lead Tech Design <www.leadtechdesign.com>
*
* See file CREDITS for list of people who contributed to this
* project.
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License as
* published by the Free Software Foundation; either version 2 of
* the License, or (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston,
* MA 02111-1307 USA
*/
#include <common.h>
#include <asm/arch/at91_common.h>
#include <asm/arch/at91_pmc.h>
#include <asm/arch/gpio.h>
#include <asm/arch/io.h>
void at91_serial0_hw_init(void)
{
at91_set_A_periph(AT91_PIN_PC8, 1); /* TXD0 */
at91_set_A_periph(AT91_PIN_PC9, 0); /* RXD0 */
at91_sys_write(AT91_PMC_PCER, 1 << AT91SAM9261_ID_US0);
}
void at91_serial1_hw_init(void)
{
at91_set_A_periph(AT91_PIN_PC12, 1); /* TXD1 */
at91_set_A_periph(AT91_PIN_PC13, 0); /* RXD1 */
at91_sys_write(AT91_PMC_PCER, 1 << AT91SAM9261_ID_US1);
}
void at91_serial2_hw_init(void)
{
at91_set_A_periph(AT91_PIN_PC14, 1); /* TXD2 */
at91_set_A_periph(AT91_PIN_PC15, 0); /* RXD2 */
at91_sys_write(AT91_PMC_PCER, 1 << AT91SAM9261_ID_US2);
}
void at91_serial3_hw_init(void)
{
at91_set_A_periph(AT91_PIN_PA9, 0); /* DRXD */
at91_set_A_periph(AT91_PIN_PA10, 1); /* DTXD */
at91_sys_write(AT91_PMC_PCER, 1 << AT91_ID_SYS);
}
void at91_serial_hw_init(void)
{
#ifdef CONFIG_USART0
at91_serial0_hw_init();
#endif
#ifdef CONFIG_USART1
at91_serial1_hw_init();
#endif
#ifdef CONFIG_USART2
at91_serial2_hw_init();
#endif
#ifdef CONFIG_USART3 /* DBGU */
at91_serial3_hw_init();
#endif
}