mirror of
https://github.com/AsahiLinux/u-boot
synced 2024-11-05 12:45:42 +00:00
506 lines
12 KiB
C
506 lines
12 KiB
C
/*
|
|
* Copyright 2007 Freescale Semiconductor, Inc.
|
|
*
|
|
* See file CREDITS for list of people who contributed to this
|
|
* project.
|
|
*
|
|
* This program is free software; you can redistribute it and/or
|
|
* modify it under the terms of the GNU General Public License as
|
|
* published by the Free Software Foundation; either version 2 of
|
|
* the License, or (at your option) any later version.
|
|
*
|
|
* This program is distributed in the hope that it will be useful,
|
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
* GNU General Public License for more details.
|
|
*
|
|
* You should have received a copy of the GNU General Public License
|
|
* along with this program; if not, write to the Free Software
|
|
* Foundation, Inc., 59 Temple Place, Suite 330, Boston,
|
|
* MA 02111-1307 USA
|
|
*/
|
|
|
|
#include <common.h>
|
|
#include <command.h>
|
|
#include <pci.h>
|
|
#include <asm/processor.h>
|
|
#include <asm/immap_85xx.h>
|
|
#include <asm/immap_fsl_pci.h>
|
|
#include <asm/io.h>
|
|
#include <spd_sdram.h>
|
|
#include <miiphy.h>
|
|
#include <libfdt.h>
|
|
#include <fdt_support.h>
|
|
|
|
#include "../common/pixis.h"
|
|
|
|
#if defined(CONFIG_DDR_ECC) && !defined(CONFIG_ECC_INIT_VIA_DDRCONTROLLER)
|
|
extern void ddr_enable_ecc(unsigned int dram_size);
|
|
#endif
|
|
|
|
void sdram_init(void);
|
|
|
|
int checkboard (void)
|
|
{
|
|
volatile ccsr_gur_t *gur = (void *)(CFG_MPC85xx_GUTS_ADDR);
|
|
volatile ccsr_lbc_t *lbc = (void *)(CFG_MPC85xx_LBC_ADDR);
|
|
volatile ccsr_local_ecm_t *ecm = (void *)(CFG_MPC85xx_ECM_ADDR);
|
|
|
|
if ((uint)&gur->porpllsr != 0xe00e0000) {
|
|
printf("immap size error %lx\n",(ulong)&gur->porpllsr);
|
|
}
|
|
printf ("Board: MPC8544DS, System ID: 0x%02x, "
|
|
"System Version: 0x%02x, FPGA Version: 0x%02x\n",
|
|
in8(PIXIS_BASE + PIXIS_ID), in8(PIXIS_BASE + PIXIS_VER),
|
|
in8(PIXIS_BASE + PIXIS_PVER));
|
|
|
|
lbc->ltesr = 0xffffffff; /* Clear LBC error interrupts */
|
|
lbc->lteir = 0xffffffff; /* Enable LBC error interrupts */
|
|
ecm->eedr = 0xffffffff; /* Clear ecm errors */
|
|
ecm->eeer = 0xffffffff; /* Enable ecm errors */
|
|
|
|
return 0;
|
|
}
|
|
|
|
phys_size_t
|
|
initdram(int board_type)
|
|
{
|
|
long dram_size = 0;
|
|
|
|
puts("Initializing\n");
|
|
|
|
dram_size = spd_sdram();
|
|
|
|
#if defined(CONFIG_DDR_ECC) && !defined(CONFIG_ECC_INIT_VIA_DDRCONTROLLER)
|
|
/*
|
|
* Initialize and enable DDR ECC.
|
|
*/
|
|
ddr_enable_ecc(dram_size);
|
|
#endif
|
|
puts(" DDR: ");
|
|
return dram_size;
|
|
}
|
|
|
|
#ifdef CONFIG_PCI1
|
|
static struct pci_controller pci1_hose;
|
|
#endif
|
|
|
|
#ifdef CONFIG_PCIE1
|
|
static struct pci_controller pcie1_hose;
|
|
#endif
|
|
|
|
#ifdef CONFIG_PCIE2
|
|
static struct pci_controller pcie2_hose;
|
|
#endif
|
|
|
|
#ifdef CONFIG_PCIE3
|
|
static struct pci_controller pcie3_hose;
|
|
#endif
|
|
|
|
int first_free_busno=0;
|
|
|
|
void
|
|
pci_init_board(void)
|
|
{
|
|
volatile ccsr_gur_t *gur = (void *)(CFG_MPC85xx_GUTS_ADDR);
|
|
uint devdisr = gur->devdisr;
|
|
uint io_sel = (gur->pordevsr & MPC85xx_PORDEVSR_IO_SEL) >> 19;
|
|
uint host_agent = (gur->porbmsr & MPC85xx_PORBMSR_HA) >> 16;
|
|
|
|
debug (" pci_init_board: devdisr=%x, io_sel=%x, host_agent=%x\n",
|
|
devdisr, io_sel, host_agent);
|
|
|
|
if (io_sel & 1) {
|
|
if (!(gur->pordevsr & MPC85xx_PORDEVSR_SGMII1_DIS))
|
|
printf (" eTSEC1 is in sgmii mode.\n");
|
|
if (!(gur->pordevsr & MPC85xx_PORDEVSR_SGMII3_DIS))
|
|
printf (" eTSEC3 is in sgmii mode.\n");
|
|
}
|
|
|
|
#ifdef CONFIG_PCIE3
|
|
{
|
|
volatile ccsr_fsl_pci_t *pci = (ccsr_fsl_pci_t *) CFG_PCIE3_ADDR;
|
|
extern void fsl_pci_init(struct pci_controller *hose);
|
|
struct pci_controller *hose = &pcie3_hose;
|
|
int pcie_ep = (host_agent == 1);
|
|
int pcie_configured = io_sel >= 1;
|
|
|
|
if (pcie_configured && !(devdisr & MPC85xx_DEVDISR_PCIE)){
|
|
printf ("\n PCIE3 connected to ULI as %s (base address %x)",
|
|
pcie_ep ? "End Point" : "Root Complex",
|
|
(uint)pci);
|
|
if (pci->pme_msg_det) {
|
|
pci->pme_msg_det = 0xffffffff;
|
|
debug (" with errors. Clearing. Now 0x%08x",pci->pme_msg_det);
|
|
}
|
|
printf ("\n");
|
|
|
|
/* inbound */
|
|
pci_set_region(hose->regions + 0,
|
|
CFG_PCI_MEMORY_BUS,
|
|
CFG_PCI_MEMORY_PHYS,
|
|
CFG_PCI_MEMORY_SIZE,
|
|
PCI_REGION_MEM | PCI_REGION_MEMORY);
|
|
|
|
/* outbound memory */
|
|
pci_set_region(hose->regions + 1,
|
|
CFG_PCIE3_MEM_BASE,
|
|
CFG_PCIE3_MEM_PHYS,
|
|
CFG_PCIE3_MEM_SIZE,
|
|
PCI_REGION_MEM);
|
|
|
|
/* outbound io */
|
|
pci_set_region(hose->regions + 2,
|
|
CFG_PCIE3_IO_BASE,
|
|
CFG_PCIE3_IO_PHYS,
|
|
CFG_PCIE3_IO_SIZE,
|
|
PCI_REGION_IO);
|
|
|
|
hose->region_count = 3;
|
|
#ifdef CFG_PCIE3_MEM_BASE2
|
|
/* outbound memory */
|
|
pci_set_region(hose->regions + 3,
|
|
CFG_PCIE3_MEM_BASE2,
|
|
CFG_PCIE3_MEM_PHYS2,
|
|
CFG_PCIE3_MEM_SIZE2,
|
|
PCI_REGION_MEM);
|
|
hose->region_count++;
|
|
#endif
|
|
hose->first_busno=first_free_busno;
|
|
pci_setup_indirect(hose, (int) &pci->cfg_addr, (int) &pci->cfg_data);
|
|
|
|
fsl_pci_init(hose);
|
|
|
|
first_free_busno=hose->last_busno+1;
|
|
printf (" PCIE3 on bus %02x - %02x\n",
|
|
hose->first_busno,hose->last_busno);
|
|
|
|
/*
|
|
* Activate ULI1575 legacy chip by performing a fake
|
|
* memory access. Needed to make ULI RTC work.
|
|
*/
|
|
in_be32((u32 *)CFG_PCIE3_MEM_BASE);
|
|
} else {
|
|
printf (" PCIE3: disabled\n");
|
|
}
|
|
|
|
}
|
|
#else
|
|
gur->devdisr |= MPC85xx_DEVDISR_PCIE3; /* disable */
|
|
#endif
|
|
|
|
#ifdef CONFIG_PCIE1
|
|
{
|
|
volatile ccsr_fsl_pci_t *pci = (ccsr_fsl_pci_t *) CFG_PCIE1_ADDR;
|
|
extern void fsl_pci_init(struct pci_controller *hose);
|
|
struct pci_controller *hose = &pcie1_hose;
|
|
int pcie_ep = (host_agent == 5);
|
|
int pcie_configured = io_sel & 6;
|
|
|
|
if (pcie_configured && !(devdisr & MPC85xx_DEVDISR_PCIE)){
|
|
printf ("\n PCIE1 connected to Slot2 as %s (base address %x)",
|
|
pcie_ep ? "End Point" : "Root Complex",
|
|
(uint)pci);
|
|
if (pci->pme_msg_det) {
|
|
pci->pme_msg_det = 0xffffffff;
|
|
debug (" with errors. Clearing. Now 0x%08x",pci->pme_msg_det);
|
|
}
|
|
printf ("\n");
|
|
|
|
/* inbound */
|
|
pci_set_region(hose->regions + 0,
|
|
CFG_PCI_MEMORY_BUS,
|
|
CFG_PCI_MEMORY_PHYS,
|
|
CFG_PCI_MEMORY_SIZE,
|
|
PCI_REGION_MEM | PCI_REGION_MEMORY);
|
|
|
|
/* outbound memory */
|
|
pci_set_region(hose->regions + 1,
|
|
CFG_PCIE1_MEM_BASE,
|
|
CFG_PCIE1_MEM_PHYS,
|
|
CFG_PCIE1_MEM_SIZE,
|
|
PCI_REGION_MEM);
|
|
|
|
/* outbound io */
|
|
pci_set_region(hose->regions + 2,
|
|
CFG_PCIE1_IO_BASE,
|
|
CFG_PCIE1_IO_PHYS,
|
|
CFG_PCIE1_IO_SIZE,
|
|
PCI_REGION_IO);
|
|
|
|
hose->region_count = 3;
|
|
#ifdef CFG_PCIE1_MEM_BASE2
|
|
/* outbound memory */
|
|
pci_set_region(hose->regions + 3,
|
|
CFG_PCIE1_MEM_BASE2,
|
|
CFG_PCIE1_MEM_PHYS2,
|
|
CFG_PCIE1_MEM_SIZE2,
|
|
PCI_REGION_MEM);
|
|
hose->region_count++;
|
|
#endif
|
|
hose->first_busno=first_free_busno;
|
|
|
|
pci_setup_indirect(hose, (int) &pci->cfg_addr, (int) &pci->cfg_data);
|
|
|
|
fsl_pci_init(hose);
|
|
|
|
first_free_busno=hose->last_busno+1;
|
|
printf(" PCIE1 on bus %02x - %02x\n",
|
|
hose->first_busno,hose->last_busno);
|
|
|
|
} else {
|
|
printf (" PCIE1: disabled\n");
|
|
}
|
|
|
|
}
|
|
#else
|
|
gur->devdisr |= MPC85xx_DEVDISR_PCIE; /* disable */
|
|
#endif
|
|
|
|
#ifdef CONFIG_PCIE2
|
|
{
|
|
volatile ccsr_fsl_pci_t *pci = (ccsr_fsl_pci_t *) CFG_PCIE2_ADDR;
|
|
extern void fsl_pci_init(struct pci_controller *hose);
|
|
struct pci_controller *hose = &pcie2_hose;
|
|
int pcie_ep = (host_agent == 3);
|
|
int pcie_configured = io_sel & 4;
|
|
|
|
if (pcie_configured && !(devdisr & MPC85xx_DEVDISR_PCIE)){
|
|
printf ("\n PCIE2 connected to Slot 1 as %s (base address %x)",
|
|
pcie_ep ? "End Point" : "Root Complex",
|
|
(uint)pci);
|
|
if (pci->pme_msg_det) {
|
|
pci->pme_msg_det = 0xffffffff;
|
|
debug (" with errors. Clearing. Now 0x%08x",pci->pme_msg_det);
|
|
}
|
|
printf ("\n");
|
|
|
|
/* inbound */
|
|
pci_set_region(hose->regions + 0,
|
|
CFG_PCI_MEMORY_BUS,
|
|
CFG_PCI_MEMORY_PHYS,
|
|
CFG_PCI_MEMORY_SIZE,
|
|
PCI_REGION_MEM | PCI_REGION_MEMORY);
|
|
|
|
/* outbound memory */
|
|
pci_set_region(hose->regions + 1,
|
|
CFG_PCIE2_MEM_BASE,
|
|
CFG_PCIE2_MEM_PHYS,
|
|
CFG_PCIE2_MEM_SIZE,
|
|
PCI_REGION_MEM);
|
|
|
|
/* outbound io */
|
|
pci_set_region(hose->regions + 2,
|
|
CFG_PCIE2_IO_BASE,
|
|
CFG_PCIE2_IO_PHYS,
|
|
CFG_PCIE2_IO_SIZE,
|
|
PCI_REGION_IO);
|
|
|
|
hose->region_count = 3;
|
|
#ifdef CFG_PCIE2_MEM_BASE2
|
|
/* outbound memory */
|
|
pci_set_region(hose->regions + 3,
|
|
CFG_PCIE2_MEM_BASE2,
|
|
CFG_PCIE2_MEM_PHYS2,
|
|
CFG_PCIE2_MEM_SIZE2,
|
|
PCI_REGION_MEM);
|
|
hose->region_count++;
|
|
#endif
|
|
hose->first_busno=first_free_busno;
|
|
pci_setup_indirect(hose, (int) &pci->cfg_addr, (int) &pci->cfg_data);
|
|
|
|
fsl_pci_init(hose);
|
|
first_free_busno=hose->last_busno+1;
|
|
printf (" PCIE2 on bus %02x - %02x\n",
|
|
hose->first_busno,hose->last_busno);
|
|
|
|
} else {
|
|
printf (" PCIE2: disabled\n");
|
|
}
|
|
|
|
}
|
|
#else
|
|
gur->devdisr |= MPC85xx_DEVDISR_PCIE2; /* disable */
|
|
#endif
|
|
|
|
|
|
#ifdef CONFIG_PCI1
|
|
{
|
|
volatile ccsr_fsl_pci_t *pci = (ccsr_fsl_pci_t *) CFG_PCI1_ADDR;
|
|
extern void fsl_pci_init(struct pci_controller *hose);
|
|
struct pci_controller *hose = &pci1_hose;
|
|
|
|
uint pci_agent = (host_agent == 6);
|
|
uint pci_speed = 66666000; /*get_clock_freq (); PCI PSPEED in [4:5] */
|
|
uint pci_32 = 1;
|
|
uint pci_arb = gur->pordevsr & MPC85xx_PORDEVSR_PCI1_ARB; /* PORDEVSR[14] */
|
|
uint pci_clk_sel = gur->porpllsr & MPC85xx_PORDEVSR_PCI1_SPD; /* PORPLLSR[16] */
|
|
|
|
|
|
if (!(devdisr & MPC85xx_DEVDISR_PCI1)) {
|
|
printf ("\n PCI: %d bit, %s MHz, %s, %s, %s (base address %x)\n",
|
|
(pci_32) ? 32 : 64,
|
|
(pci_speed == 33333000) ? "33" :
|
|
(pci_speed == 66666000) ? "66" : "unknown",
|
|
pci_clk_sel ? "sync" : "async",
|
|
pci_agent ? "agent" : "host",
|
|
pci_arb ? "arbiter" : "external-arbiter",
|
|
(uint)pci
|
|
);
|
|
|
|
/* inbound */
|
|
pci_set_region(hose->regions + 0,
|
|
CFG_PCI_MEMORY_BUS,
|
|
CFG_PCI_MEMORY_PHYS,
|
|
CFG_PCI_MEMORY_SIZE,
|
|
PCI_REGION_MEM | PCI_REGION_MEMORY);
|
|
|
|
/* outbound memory */
|
|
pci_set_region(hose->regions + 1,
|
|
CFG_PCI1_MEM_BASE,
|
|
CFG_PCI1_MEM_PHYS,
|
|
CFG_PCI1_MEM_SIZE,
|
|
PCI_REGION_MEM);
|
|
|
|
/* outbound io */
|
|
pci_set_region(hose->regions + 2,
|
|
CFG_PCI1_IO_BASE,
|
|
CFG_PCI1_IO_PHYS,
|
|
CFG_PCI1_IO_SIZE,
|
|
PCI_REGION_IO);
|
|
hose->region_count = 3;
|
|
#ifdef CFG_PCIE3_MEM_BASE2
|
|
/* outbound memory */
|
|
pci_set_region(hose->regions + 3,
|
|
CFG_PCIE3_MEM_BASE2,
|
|
CFG_PCIE3_MEM_PHYS2,
|
|
CFG_PCIE3_MEM_SIZE2,
|
|
PCI_REGION_MEM);
|
|
hose->region_count++;
|
|
#endif
|
|
hose->first_busno=first_free_busno;
|
|
pci_setup_indirect(hose, (int) &pci->cfg_addr, (int) &pci->cfg_data);
|
|
|
|
fsl_pci_init(hose);
|
|
first_free_busno=hose->last_busno+1;
|
|
printf ("PCI on bus %02x - %02x\n",
|
|
hose->first_busno,hose->last_busno);
|
|
} else {
|
|
printf (" PCI: disabled\n");
|
|
}
|
|
}
|
|
#else
|
|
gur->devdisr |= MPC85xx_DEVDISR_PCI1; /* disable */
|
|
#endif
|
|
}
|
|
|
|
|
|
int last_stage_init(void)
|
|
{
|
|
return 0;
|
|
}
|
|
|
|
|
|
unsigned long
|
|
get_board_sys_clk(ulong dummy)
|
|
{
|
|
u8 i, go_bit, rd_clks;
|
|
ulong val = 0;
|
|
|
|
go_bit = in8(PIXIS_BASE + PIXIS_VCTL);
|
|
go_bit &= 0x01;
|
|
|
|
rd_clks = in8(PIXIS_BASE + PIXIS_VCFGEN0);
|
|
rd_clks &= 0x1C;
|
|
|
|
/*
|
|
* Only if both go bit and the SCLK bit in VCFGEN0 are set
|
|
* should we be using the AUX register. Remember, we also set the
|
|
* GO bit to boot from the alternate bank on the on-board flash
|
|
*/
|
|
|
|
if (go_bit) {
|
|
if (rd_clks == 0x1c)
|
|
i = in8(PIXIS_BASE + PIXIS_AUX);
|
|
else
|
|
i = in8(PIXIS_BASE + PIXIS_SPD);
|
|
} else {
|
|
i = in8(PIXIS_BASE + PIXIS_SPD);
|
|
}
|
|
|
|
i &= 0x07;
|
|
|
|
switch (i) {
|
|
case 0:
|
|
val = 33333333;
|
|
break;
|
|
case 1:
|
|
val = 40000000;
|
|
break;
|
|
case 2:
|
|
val = 50000000;
|
|
break;
|
|
case 3:
|
|
val = 66666666;
|
|
break;
|
|
case 4:
|
|
val = 83000000;
|
|
break;
|
|
case 5:
|
|
val = 100000000;
|
|
break;
|
|
case 6:
|
|
val = 133333333;
|
|
break;
|
|
case 7:
|
|
val = 166666666;
|
|
break;
|
|
}
|
|
|
|
return val;
|
|
}
|
|
|
|
#if defined(CONFIG_OF_BOARD_SETUP)
|
|
|
|
void
|
|
ft_board_setup(void *blob, bd_t *bd)
|
|
{
|
|
int node, tmp[2];
|
|
const char *path;
|
|
|
|
ft_cpu_setup(blob, bd);
|
|
|
|
node = fdt_path_offset(blob, "/aliases");
|
|
tmp[0] = 0;
|
|
if (node >= 0) {
|
|
#ifdef CONFIG_PCI1
|
|
path = fdt_getprop(blob, node, "pci0", NULL);
|
|
if (path) {
|
|
tmp[1] = pci1_hose.last_busno - pci1_hose.first_busno;
|
|
do_fixup_by_path(blob, path, "bus-range", &tmp, 8, 1);
|
|
}
|
|
#endif
|
|
#ifdef CONFIG_PCIE2
|
|
path = fdt_getprop(blob, node, "pci1", NULL);
|
|
if (path) {
|
|
tmp[1] = pcie2_hose.last_busno - pcie2_hose.first_busno;
|
|
do_fixup_by_path(blob, path, "bus-range", &tmp, 8, 1);
|
|
}
|
|
#endif
|
|
#ifdef CONFIG_PCIE1
|
|
path = fdt_getprop(blob, node, "pci2", NULL);
|
|
if (path) {
|
|
tmp[1] = pcie1_hose.last_busno - pcie1_hose.first_busno;
|
|
do_fixup_by_path(blob, path, "bus-range", &tmp, 8, 1);
|
|
}
|
|
#endif
|
|
#ifdef CONFIG_PCIE3
|
|
path = fdt_getprop(blob, node, "pci3", NULL);
|
|
if (path) {
|
|
tmp[1] = pcie3_hose.last_busno - pcie3_hose.first_busno;
|
|
do_fixup_by_path(blob, path, "bus-range", &tmp, 8, 1);
|
|
}
|
|
#endif
|
|
}
|
|
}
|
|
#endif
|