u-boot/board/keymile/kmcent2/kmcent2.c
Tom Rini e4c3ce7e28 CONFIG_SYS_CLK_FREQ: Consistently be static or get_board_sys_clk()
This CONFIG option is used in one of two ways.  The first way is that it
is defined to a static value, of an unsigned long size.  The second way
is that it is defined to something, typically a function, to determine
this value at run time.

However, in a few cases that function returns a static value.  Change
that to using the static value directly.

In the case of using something at run time, convert everything to using
a function of the same name and prototype.  This will allow for further
cleanups.

Finally, we have a few cases where the function is just not used, so
drop it.

Signed-off-by: Tom Rini <trini@konsulko.com>
2021-12-27 16:20:18 -05:00

348 lines
8.5 KiB
C

// SPDX-License-Identifier: GPL-2.0+
/*
* (C) Copyright 2016 Keymile AG
* Rainer Boschung <rainer.boschung@keymile.com>
*
* Copyright 2013 Freescale Semiconductor, Inc.
*/
#include <asm/cache.h>
#include <asm/fsl_fdt.h>
#include <asm/fsl_law.h>
#include <asm/fsl_liodn.h>
#include <asm/fsl_portals.h>
#include <asm/fsl_serdes.h>
#include <asm/immap_85xx.h>
#include <asm/mmu.h>
#include <asm/processor.h>
#include <fdt_support.h>
#include <fm_eth.h>
#include <hwconfig.h>
#include <image.h>
#include <linux/compiler.h>
#include <net.h>
#include <netdev.h>
#include <vsc9953.h>
#include "../common/common.h"
#include "../common/qrio.h"
DECLARE_GLOBAL_DATA_PTR;
static uchar ivm_content[CONFIG_SYS_IVM_EEPROM_MAX_LEN];
int checkboard(void)
{
printf("Board: Hitachi Power Grids %s\n", KM_BOARD_NAME);
return 0;
}
#define RSTRQSR1_WDT_RR 0x00200000
#define RSTRQSR1_SW_RR 0x00100000
int board_early_init_f(void)
{
struct fsl_ifc ifc = {(void *)CONFIG_SYS_IFC_ADDR, (void *)NULL};
ccsr_gur_t *gur = (void *)(CONFIG_SYS_MPC85xx_GUTS_ADDR);
bool cpuwd_flag = false;
/* board specific IFC configuration: increased bus turnaround time */
setbits_be32(&ifc.gregs->ifc_gcr, 8 << IFC_GCR_TBCTL_TRN_TIME_SHIFT);
/* configure mode for uP reset request */
qrio_uprstreq(UPREQ_CORE_RST);
/* board only uses the DDR_MCK0, so disable the DDR_MCK1 */
setbits_be32(&gur->ddrclkdr, 0x40000000);
/* set reset reason according CPU register */
if ((gur->rstrqsr1 & (RSTRQSR1_WDT_RR | RSTRQSR1_SW_RR)) ==
RSTRQSR1_WDT_RR)
cpuwd_flag = true;
qrio_cpuwd_flag(cpuwd_flag);
/* clear CPU bits by writing 1 */
setbits_be32(&gur->rstrqsr1, RSTRQSR1_WDT_RR | RSTRQSR1_SW_RR);
/* configure PRST lines for the application: */
/*
* ETHSW_DDR_RST:
* reset at power-up and unit reset only and enable WD on it
*/
qrio_prstcfg(KM_ETHSW_DDR_RST, PRSTCFG_POWUP_UNIT_RST);
qrio_wdmask(KM_ETHSW_DDR_RST, true);
/*
* XES_PHY_RST:
* reset at power-up and unit reset only and enable WD on it
*/
qrio_prstcfg(KM_XES_PHY_RST, PRSTCFG_POWUP_UNIT_RST);
qrio_wdmask(KM_XES_PHY_RST, true);
/*
* ES_PHY_RST:
* reset at power-up and unit reset only and enable WD on it
*/
qrio_prstcfg(KM_ES_PHY_RST, PRSTCFG_POWUP_UNIT_RST);
qrio_wdmask(KM_ES_PHY_RST, true);
/*
* EFE_RST:
* reset at power-up and unit reset only and enable WD on it
*/
qrio_prstcfg(KM_EFE_RST, PRSTCFG_POWUP_UNIT_RST);
qrio_wdmask(KM_EFE_RST, true);
/*
* BFTIC4_RST:
* reset at power-up and unit reset only and enable WD on it
*/
qrio_prstcfg(KM_BFTIC4_RST, PRSTCFG_POWUP_UNIT_RST);
qrio_wdmask(KM_BFTIC4_RST, true);
/*
* DPAXE_RST:
* reset at power-up and unit reset only and enable WD on it
*/
qrio_prstcfg(KM_DPAXE_RST, PRSTCFG_POWUP_UNIT_RST);
qrio_wdmask(KM_DPAXE_RST, true);
/*
* PEXSW_RST:
* reset at power-up and unit reset only, deassert reset w/o WD
*/
qrio_prstcfg(KM_PEXSW_RST, PRSTCFG_POWUP_UNIT_RST);
qrio_prst(KM_PEXSW_RST, false, false);
/*
* PEXSW_NT_RST:
* reset at power-up and unit reset only, deassert reset w/o WD
*/
qrio_prstcfg(KM_PEXSW_NT_RST, PRSTCFG_POWUP_UNIT_RST);
qrio_prst(KM_PEXSW_NT_RST, false, false);
/*
* BOBCAT_RST:
* reset at power-up and unit reset only, deassert reset w/o WD
*/
qrio_prstcfg(KM_BOBCAT_RST, PRSTCFG_POWUP_UNIT_RST);
qrio_prst(KM_BOBCAT_RST, false, false);
/*
* FEMT_RST:
* reset at power-up and unit reset only and enable WD
*/
qrio_prstcfg(KM_FEMT_RST, PRSTCFG_POWUP_UNIT_RST);
qrio_wdmask(KM_FEMT_RST, true);
/*
* FOAM_RST:
* reset at power-up and unit reset only and enable WD
*/
qrio_prstcfg(KM_FOAM_RST, PRSTCFG_POWUP_UNIT_RST);
qrio_wdmask(KM_FOAM_RST, true);
return 0;
}
int board_early_init_r(void)
{
int ret = 0;
const unsigned int flashbase = CONFIG_SYS_FLASH_BASE;
int flash_esel = find_tlb_idx((void *)flashbase, 1);
/*
* Remap Boot flash region to caching-inhibited
* so that flash can be erased properly.
*/
/* Flush d-cache and invalidate i-cache of any FLASH data */
flush_dcache();
invalidate_icache();
if (flash_esel == -1) {
/* very unlikely unless something is messed up */
puts("Error: Could not find TLB for FLASH BASE\n");
flash_esel = 2; /* give our best effort to continue */
} else {
/* invalidate existing TLB entry for flash */
disable_tlb(flash_esel);
}
set_tlb(1, flashbase, CONFIG_SYS_FLASH_BASE_PHYS,
MAS3_SX | MAS3_SW | MAS3_SR, MAS2_I | MAS2_G,
0, flash_esel, BOOKE_PAGESZ_256M, 1);
set_liodns();
setup_qbman_portals();
qrio_set_leds();
/* enable Application Buffer */
qrio_enable_app_buffer();
return ret;
}
unsigned long get_serial_clock(unsigned long dummy)
{
return (gd->bus_clk / 2);
}
int misc_init_f(void)
{
/* configure QRIO pis for i2c deblocking */
i2c_deblock_gpio_cfg();
/*
* CFE_RST (front phy):
* reset at power-up, unit and core reset, deasset reset w/o WD
*/
qrio_prstcfg(KM_CFE_RST, PRSTCFG_POWUP_UNIT_CORE_RST);
qrio_prst(KM_CFE_RST, false, false);
/*
* ZL30158_RST (PTP clock generator):
* reset at power-up only, deassert reset and enable WD on it
*/
qrio_prstcfg(KM_ZL30158_RST, PRSTCFG_POWUP_RST);
qrio_prst(KM_ZL30158_RST, false, false);
/*
* ZL30364_RST (EEC generator):
* reset at power-up only, deassert reset and enable WD on it
*/
qrio_prstcfg(KM_ZL30364_RST, PRSTCFG_POWUP_RST);
qrio_prst(KM_ZL30364_RST, false, false);
return 0;
}
#define USED_SRDS_BANK 0
#define EXPECTED_SRDS_RFCK SRDS_PLLCR0_RFCK_SEL_100
#define BRG01_IOCLK12 0x02000000
#define EC2_GTX_CLK125 0x08000000
int misc_init_r(void)
{
serdes_corenet_t *regs = (void *)CONFIG_SYS_FSL_CORENET_SERDES_ADDR;
struct ccsr_scfg *scfg = (struct ccsr_scfg *)CONFIG_SYS_MPC85xx_SCFG;
ccsr_gur_t __iomem *gur = (ccsr_gur_t __iomem *)CONFIG_SYS_MPC85xx_GUTS_ADDR;
/* check SERDES bank 0 reference clock */
u32 actual = in_be32(&regs->bank[USED_SRDS_BANK].pllcr0);
if (actual & SRDS_PLLCR0_POFF)
printf("Warning: SERDES bank %u pll is off\n", USED_SRDS_BANK);
if ((actual & SRDS_PLLCR0_RFCK_SEL_MASK) != EXPECTED_SRDS_RFCK) {
printf("Warning: SERDES bank %u expects %sMHz clock, is %sMHz\n",
USED_SRDS_BANK,
serdes_clock_to_string(EXPECTED_SRDS_RFCK),
serdes_clock_to_string(actual));
}
/* QE IO clk : BRG01 is used over clk12 for HDLC clk (20 MhZ) */
out_be32(&scfg->qeioclkcr,
in_be32(&scfg->qeioclkcr) | BRG01_IOCLK12);
ivm_read_eeprom(ivm_content, CONFIG_SYS_IVM_EEPROM_MAX_LEN,
CONFIG_PIGGY_MAC_ADDRESS_OFFSET);
/* Fix polarity of Card Detect and Write Protect */
out_be32(&gur->sdhcpcr, 0xFFFFFFFF);
/*
* EC1 is disabled in our design, so we must explicitly set GTXCLKSEL
* to EC2
*/
out_be32(&scfg->emiiocr, in_be32(&scfg->emiiocr) | EC2_GTX_CLK125);
return 0;
}
int hush_init_var(void)
{
ivm_analyze_eeprom(ivm_content, CONFIG_SYS_IVM_EEPROM_MAX_LEN);
return 0;
}
int last_stage_init(void)
{
const char *kmem;
/* DIP switch support on BFTIC */
struct bfticu_iomap *bftic4 =
(struct bfticu_iomap *)SYS_BFTIC_BASE;
u8 dip_switch = in_8((u8 *)&bftic4->mswitch) & BFTICU_DIPSWITCH_MASK;
if (dip_switch != 0) {
/* start bootloader */
puts("DIP: Enabled\n");
env_set("actual_bank", "0");
}
set_km_env();
/*
* bootm_size is used to fixup the FDT memory node
* set it to kernelmem that has the same value
*/
kmem = env_get("kernelmem");
if (kmem)
env_set("bootm_size", kmem);
return 0;
}
void fdt_fixup_fman_mac_addresses(void *blob)
{
int node, ret;
char path[24];
unsigned char mac_addr[6];
/*
* Just the fm1-mac5 must be set by us, u-boot handle the 2 others,
* get the mac addr from env
*/
if (!eth_env_get_enetaddr_by_index("eth", 4, mac_addr)) {
printf("eth4addr env variable not defined\n");
return;
}
/* local management port */
strcpy(path, "/soc/fman/ethernet@e8000");
node = fdt_path_offset(blob, path);
if (node < 0) {
printf("no %s\n", path);
return;
}
ret = fdt_setprop(blob, node, "local-mac-address", mac_addr, 6);
if (ret) {
printf("%s\n\terror setting local-mac-address property\n",
path);
}
}
int ft_board_setup(void *blob, struct bd_info *bd)
{
phys_addr_t base;
phys_size_t size;
ft_cpu_setup(blob, bd);
base = env_get_bootm_low();
size = env_get_bootm_size();
fdt_fixup_memory(blob, (u64)base, (u64)size);
fdt_fixup_liodn(blob);
fdt_fixup_fman_mac_addresses(blob);
if (hwconfig("qe-tdm"))
fdt_del_diu(blob);
return 0;
}
/* DIC26_SELFTEST GPIO used to start factory test sw */
#define SELFTEST_PORT QRIO_GPIO_A
#define SELFTEST_PIN 0
int post_hotkeys_pressed(void)
{
qrio_gpio_direction_input(SELFTEST_PORT, SELFTEST_PIN);
return qrio_get_gpio(SELFTEST_PORT, SELFTEST_PIN);
}