mirror of
https://github.com/AsahiLinux/u-boot
synced 2024-11-25 06:00:43 +00:00
a321148b5b
This patch includes the following changes for the lwmon5 board support: - Enable cache in SDRAM - Use common EHCI driver instead of the PPC4xx specific OHCI driver This can be done since only high-speed devices are connected. - Remove cached TLB entry again after ECC setup - Use correct define for cache enabling (CONFIG_4xx_DCACHE instead of CONFIG_SYS_ENABLE_SDRAM_CACHE) - Enable FIT image support Signed-off-by: Stefan Roese <sr@denx.de>
258 lines
7 KiB
C
258 lines
7 KiB
C
/*
|
|
* (C) Copyright 2006
|
|
* Sylvie Gohl, AMCC/IBM, gohl.sylvie@fr.ibm.com
|
|
* Jacqueline Pira-Ferriol, AMCC/IBM, jpira-ferriol@fr.ibm.com
|
|
* Thierry Roman, AMCC/IBM, thierry_roman@fr.ibm.com
|
|
* Alain Saurel, AMCC/IBM, alain.saurel@fr.ibm.com
|
|
* Robert Snyder, AMCC/IBM, rob.snyder@fr.ibm.com
|
|
*
|
|
* (C) Copyright 2007-2008
|
|
* Stefan Roese, DENX Software Engineering, sr@denx.de.
|
|
*
|
|
* This program is free software; you can redistribute it and/or
|
|
* modify it under the terms of the GNU General Public License as
|
|
* published by the Free Software Foundation; either version 2 of
|
|
* the License, or (at your option) any later version.
|
|
*
|
|
* This program is distributed in the hope that it will be useful,
|
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
* GNU General Public License for more details.
|
|
*
|
|
* You should have received a copy of the GNU General Public License
|
|
* along with this program; if not, write to the Free Software
|
|
* Foundation, Inc., 59 Temple Place, Suite 330, Boston,
|
|
* MA 02111-1307 USA
|
|
*/
|
|
|
|
/* define DEBUG for debugging output (obviously ;-)) */
|
|
#if 0
|
|
#define DEBUG
|
|
#endif
|
|
|
|
#include <common.h>
|
|
#include <asm/processor.h>
|
|
#include <asm/mmu.h>
|
|
#include <asm/io.h>
|
|
#include <asm/cache.h>
|
|
#include <asm/ppc440.h>
|
|
#include <watchdog.h>
|
|
|
|
/*
|
|
* This DDR2 setup code can dynamically setup the TLB entries for the DDR2 memory
|
|
* region. Right now the cache should still be disabled in U-Boot because of the
|
|
* EMAC driver, that need it's buffer descriptor to be located in non cached
|
|
* memory.
|
|
*
|
|
* If at some time this restriction doesn't apply anymore, just define
|
|
* CONFIG_4xx_DCACHE in the board config file and this code should setup
|
|
* everything correctly.
|
|
*/
|
|
#ifdef CONFIG_4xx_DCACHE
|
|
#define MY_TLB_WORD2_I_ENABLE 0 /* enable caching on SDRAM */
|
|
#else
|
|
#define MY_TLB_WORD2_I_ENABLE TLB_WORD2_I_ENABLE /* disable caching on SDRAM */
|
|
#endif
|
|
|
|
/*-----------------------------------------------------------------------------+
|
|
* Prototypes
|
|
*-----------------------------------------------------------------------------*/
|
|
extern int denali_wait_for_dlllock(void);
|
|
extern void denali_core_search_data_eye(void);
|
|
extern void dcbz_area(u32 start_address, u32 num_bytes);
|
|
|
|
static u32 is_ecc_enabled(void)
|
|
{
|
|
u32 val;
|
|
|
|
mfsdram(DDR0_22, val);
|
|
val &= DDR0_22_CTRL_RAW_MASK;
|
|
if (val)
|
|
return 1;
|
|
else
|
|
return 0;
|
|
}
|
|
|
|
void board_add_ram_info(int use_default)
|
|
{
|
|
PPC4xx_SYS_INFO board_cfg;
|
|
u32 val;
|
|
|
|
if (is_ecc_enabled())
|
|
puts(" (ECC");
|
|
else
|
|
puts(" (ECC not");
|
|
|
|
get_sys_info(&board_cfg);
|
|
printf(" enabled, %ld MHz", (board_cfg.freqPLB * 2) / 1000000);
|
|
|
|
mfsdram(DDR0_03, val);
|
|
val = DDR0_03_CASLAT_DECODE(val);
|
|
printf(", CL%d)", val);
|
|
}
|
|
|
|
#ifdef CONFIG_DDR_ECC
|
|
static void wait_ddr_idle(void)
|
|
{
|
|
/*
|
|
* Controller idle status cannot be determined for Denali
|
|
* DDR2 code. Just return here.
|
|
*/
|
|
}
|
|
|
|
static void program_ecc(u32 start_address,
|
|
u32 num_bytes,
|
|
u32 tlb_word2_i_value)
|
|
{
|
|
u32 val;
|
|
u32 current_addr = start_address;
|
|
u32 size;
|
|
int bytes_remaining;
|
|
|
|
sync();
|
|
wait_ddr_idle();
|
|
|
|
/*
|
|
* Because of 440EPx errata CHIP 11, we don't touch the last 256
|
|
* bytes of SDRAM.
|
|
*/
|
|
bytes_remaining = num_bytes - CONFIG_SYS_MEM_TOP_HIDE;
|
|
|
|
/*
|
|
* We have to write the ECC bytes by zeroing and flushing in smaller
|
|
* steps, since the whole 256MByte takes too long for the external
|
|
* watchdog.
|
|
*/
|
|
while (bytes_remaining > 0) {
|
|
size = min((64 << 20), bytes_remaining);
|
|
|
|
/* Write zero's to SDRAM */
|
|
dcbz_area(current_addr, size);
|
|
|
|
/* Write modified dcache lines back to memory */
|
|
clean_dcache_range(current_addr, current_addr + size);
|
|
|
|
current_addr += 64 << 20;
|
|
bytes_remaining -= 64 << 20;
|
|
WATCHDOG_RESET();
|
|
}
|
|
|
|
sync();
|
|
wait_ddr_idle();
|
|
|
|
/* Clear error status */
|
|
mfsdram(DDR0_00, val);
|
|
mtsdram(DDR0_00, val | DDR0_00_INT_ACK_ALL);
|
|
|
|
/* Set 'int_mask' parameter to functionnal value */
|
|
mfsdram(DDR0_01, val);
|
|
mtsdram(DDR0_01, ((val &~ DDR0_01_INT_MASK_MASK) | DDR0_01_INT_MASK_ALL_OFF));
|
|
|
|
sync();
|
|
wait_ddr_idle();
|
|
}
|
|
#endif
|
|
|
|
/*************************************************************************
|
|
*
|
|
* initdram -- 440EPx's DDR controller is a DENALI Core
|
|
*
|
|
************************************************************************/
|
|
phys_size_t initdram (int board_type)
|
|
{
|
|
/* CL=4 */
|
|
mtsdram(DDR0_02, 0x00000000);
|
|
|
|
mtsdram(DDR0_00, 0x0000190A);
|
|
mtsdram(DDR0_01, 0x01000000);
|
|
mtsdram(DDR0_03, 0x02040803); /* A suitable burst length was taken. CAS is right for our board */
|
|
|
|
mtsdram(DDR0_04, 0x0B030300);
|
|
mtsdram(DDR0_05, 0x02020308);
|
|
mtsdram(DDR0_06, 0x0003C812);
|
|
mtsdram(DDR0_07, 0x00090100);
|
|
mtsdram(DDR0_08, 0x03c80001);
|
|
mtsdram(DDR0_09, 0x00011D5F);
|
|
mtsdram(DDR0_10, 0x00000100);
|
|
mtsdram(DDR0_11, 0x000CC800);
|
|
mtsdram(DDR0_12, 0x00000003);
|
|
mtsdram(DDR0_14, 0x00000000);
|
|
mtsdram(DDR0_17, 0x1e000000);
|
|
mtsdram(DDR0_18, 0x1e1e1e1e);
|
|
mtsdram(DDR0_19, 0x1e1e1e1e);
|
|
mtsdram(DDR0_20, 0x0B0B0B0B);
|
|
mtsdram(DDR0_21, 0x0B0B0B0B);
|
|
#ifdef CONFIG_DDR_ECC
|
|
mtsdram(DDR0_22, 0x00267F0B | DDR0_22_CTRL_RAW_ECC_ENABLE); /* enable ECC */
|
|
#else
|
|
mtsdram(DDR0_22, 0x00267F0B);
|
|
#endif
|
|
|
|
mtsdram(DDR0_23, 0x01000000);
|
|
mtsdram(DDR0_24, 0x01010001);
|
|
|
|
mtsdram(DDR0_26, 0x2D93028A);
|
|
mtsdram(DDR0_27, 0x0784682B);
|
|
|
|
mtsdram(DDR0_28, 0x00000080);
|
|
mtsdram(DDR0_31, 0x00000000);
|
|
mtsdram(DDR0_42, 0x01000008);
|
|
|
|
mtsdram(DDR0_43, 0x050A0200);
|
|
mtsdram(DDR0_44, 0x00000005);
|
|
mtsdram(DDR0_02, 0x00000001); /* Activate the denali core */
|
|
|
|
denali_wait_for_dlllock();
|
|
|
|
#if defined(CONFIG_DDR_DATA_EYE)
|
|
/* -----------------------------------------------------------+
|
|
* Perform data eye search if requested.
|
|
* ----------------------------------------------------------*/
|
|
program_tlb(0, CONFIG_SYS_SDRAM_BASE, CONFIG_SYS_MBYTES_SDRAM << 20,
|
|
TLB_WORD2_I_ENABLE);
|
|
denali_core_search_data_eye();
|
|
remove_tlb(CONFIG_SYS_SDRAM_BASE, CONFIG_SYS_MBYTES_SDRAM << 20);
|
|
#endif
|
|
|
|
/*
|
|
* Program tlb entries for this size (dynamic)
|
|
*/
|
|
program_tlb(0, CONFIG_SYS_SDRAM_BASE, CONFIG_SYS_MBYTES_SDRAM << 20,
|
|
MY_TLB_WORD2_I_ENABLE);
|
|
|
|
#if defined(CONFIG_DDR_ECC)
|
|
#if defined(CONFIG_4xx_DCACHE)
|
|
/*
|
|
* If ECC is enabled, initialize the parity bits.
|
|
*/
|
|
program_ecc(0, CONFIG_SYS_MBYTES_SDRAM << 20, 0);
|
|
#else /* CONFIG_4xx_DCACHE */
|
|
/*
|
|
* Setup 2nd TLB with same physical address but different virtual address
|
|
* with cache enabled. This is done for fast ECC generation.
|
|
*/
|
|
program_tlb(0, CONFIG_SYS_DDR_CACHED_ADDR, CONFIG_SYS_MBYTES_SDRAM << 20, 0);
|
|
|
|
/*
|
|
* If ECC is enabled, initialize the parity bits.
|
|
*/
|
|
program_ecc(CONFIG_SYS_DDR_CACHED_ADDR, CONFIG_SYS_MBYTES_SDRAM << 20, 0);
|
|
|
|
/*
|
|
* Now after initialization (auto-calibration and ECC generation)
|
|
* remove the TLB entries with caches enabled and program again with
|
|
* desired cache functionality
|
|
*/
|
|
remove_tlb(CONFIG_SYS_DDR_CACHED_ADDR, CONFIG_SYS_MBYTES_SDRAM << 20);
|
|
#endif /* CONFIG_4xx_DCACHE */
|
|
#endif /* CONFIG_DDR_ECC */
|
|
|
|
/*
|
|
* Clear possible errors resulting from data-eye-search.
|
|
* If not done, then we could get an interrupt later on when
|
|
* exceptions are enabled.
|
|
*/
|
|
set_mcsr(get_mcsr());
|
|
|
|
return (CONFIG_SYS_MBYTES_SDRAM << 20);
|
|
}
|