u-boot/arch/arm
Philipp Tomsich 46c89c8efa rockchip: dts: rk3399-puma: replace 'rockchip, vbus-gpio' with fixed regulator
On the RK3399-Q7, we need to turn on the on-module USB hub before using the
USB host interfaces (only the OTG interface is directly connected to the edge
connector).  This drops the deprecated 'rockchip,vbus-gpio' property and uses
a fixed regulator to turn on the USB hub.

References: 26a8b80 "usb: host: xhci-rockchip: use fixed regulator to control vbus"
Signed-off-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2017-09-18 20:40:37 +02:00
..
cpu blk: Remove various places that do flush cache after read 2017-09-15 08:05:10 -04:00
dts rockchip: dts: rk3399-puma: replace 'rockchip, vbus-gpio' with fixed regulator 2017-09-18 20:40:37 +02:00
include rockchip: rk322x: Disable integrated macphy for saving power consuming 2017-09-18 20:40:33 +02:00
lib env: Rename getenv/_f() to env_get() 2017-08-16 08:30:24 -04:00
mach-aspeed aspeed: Refactor SCU to use consistent mask & shift 2017-05-08 11:57:35 -04:00
mach-at91 ARM: at91: spl: Add macro CONFIG_XXXX_BOOT support 2017-09-14 16:02:47 -04:00
mach-bcm283x bcm2835_wdt: support for the BCM2835/2836 watchdog 2017-05-09 20:30:08 -04:00
mach-davinci ARM: davinci: Remove CONFIG_SOC_DA830 2017-09-15 12:35:48 -04:00
mach-exynos usb: net: migrate USB Ethernet adapters to Kconfig 2017-09-08 10:23:00 -04:00
mach-highbank ARM: highbank: move SoC sources to mach-highbank 2015-02-21 08:23:51 -05:00
mach-imx usb: net: migrate USB Ethernet adapters to Kconfig 2017-09-08 10:23:00 -04:00
mach-integrator env: Convert CONFIG_ENV_IS_IN... to a choice 2017-08-15 20:50:01 -04:00
mach-keystone env: Rename getenv/_f() to env_get() 2017-08-16 08:30:24 -04:00
mach-kirkwood env: Rename getenv/_f() to env_get() 2017-08-16 08:30:24 -04:00
mach-meson meson-gx: reserved memory regions 2017-07-22 15:36:18 -04:00
mach-mvebu env: Convert CONFIG_ENV_IS_IN... to a choice 2017-08-15 20:50:01 -04:00
mach-omap2 arm: mach-omap2: Relax checks on OP-TEE location to allow pageable image 2017-09-15 09:03:16 -04:00
mach-orion5x spl: add hierarchical defaults for SPL_LDSCRIPT 2017-08-13 17:12:37 +02:00
mach-rmobile ARM: rmobile: Add missing IPSR18 bits to R8A7795 PFC 2017-09-05 07:51:39 +09:00
mach-rockchip rk3288: Add Vyasa initial board support 2017-09-18 20:40:36 +02:00
mach-s5pc1xx arm: s5pc1xx: move SoC to mach-s5pc1xx 2015-11-30 17:17:01 +09:00
mach-snapdragon dm: Rename dev_addr..() functions 2017-06-01 07:03:01 -06:00
mach-socfpga env: Rename setenv() to env_set() 2017-08-16 08:22:18 -04:00
mach-sti board: Add STMicroelectronics STiH410-B2260 support 2017-03-14 20:40:21 -04:00
mach-stm32 spl: stm32: make falcon mode activation configurable 2017-08-26 14:56:13 -04:00
mach-sunxi sunxi: Enable MMC new mode for A83T 2017-08-28 22:36:48 +05:30
mach-tegra dm: core: Add ofnode_for_each_subnode() 2017-09-11 21:43:58 -06:00
mach-uniphier ARM: uniphier: set system bus pinmux for PXs3 2017-08-30 09:07:04 +09:00
mach-versatile arm: Remove versatileab board 2015-09-11 15:01:25 -04:00
mach-zynq spl: add hierarchical defaults for SPL_LDSCRIPT 2017-08-13 17:12:37 +02:00
thumb1/include/asm/proc-armv arm: support Thumb-1 with CONFIG_SYS_THUMB_BUILD 2015-11-10 15:03:48 +01:00
config.mk arm: Always keep the dtb section on objcopy 2017-06-05 14:13:11 -04:00
Kconfig armv8: ls1088aqds: Add support of LS1088AQDS 2017-09-11 08:01:05 -07:00
Kconfig.debug arm: debug: add Kconfig entries for lowlevel debug 2014-10-26 22:23:12 +01:00
Makefile imx: reorganize IMX code as other SOCs 2017-07-12 10:17:44 +02:00