u-boot/arch/x86/cpu/apollolake/p2sb.c
Simon Glass 46c674bfde x86: apl: Add P2SB driver
Adds a driver for the Apollo Lake Primary-to-sideband bus. This supports
various child devices. It supposed both device tree and of-platdata.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2019-12-15 11:44:29 +08:00

166 lines
4.1 KiB
C

// SPDX-License-Identifier: GPL-2.0
/*
* Primary-to-Sideband Bridge
*
* Copyright 2019 Google LLC
*/
#define LOG_CATEGORY UCLASS_P2SB
#include <common.h>
#include <dm.h>
#include <dt-structs.h>
#include <p2sb.h>
#include <spl.h>
#include <asm/pci.h>
struct p2sb_platdata {
#if CONFIG_IS_ENABLED(OF_PLATDATA)
struct dtd_intel_apl_p2sb dtplat;
#endif
ulong mmio_base;
pci_dev_t bdf;
};
/* PCI config space registers */
#define HPTC_OFFSET 0x60
#define HPTC_ADDR_ENABLE_BIT BIT(7)
/* High Performance Event Timer Configuration */
#define P2SB_HPTC 0x60
#define P2SB_HPTC_ADDRESS_ENABLE BIT(7)
/*
* ADDRESS_SELECT ENCODING_RANGE
* 0 0xfed0 0000 - 0xfed0 03ff
* 1 0xfed0 1000 - 0xfed0 13ff
* 2 0xfed0 2000 - 0xfed0 23ff
* 3 0xfed0 3000 - 0xfed0 33ff
*/
#define P2SB_HPTC_ADDRESS_SELECT_0 (0 << 0)
#define P2SB_HPTC_ADDRESS_SELECT_1 (1 << 0)
#define P2SB_HPTC_ADDRESS_SELECT_2 (2 << 0)
#define P2SB_HPTC_ADDRESS_SELECT_3 (3 << 0)
/*
* apl_p2sb_early_init() - Enable decoding for HPET range
*
* This is needed by FSP-M which uses the High Precision Event Timer.
*
* @dev: P2SB device
* @return 0 if OK, -ve on error
*/
static int apl_p2sb_early_init(struct udevice *dev)
{
struct p2sb_platdata *plat = dev_get_platdata(dev);
pci_dev_t pdev = plat->bdf;
/*
* Enable decoding for HPET memory address range.
* HPTC_OFFSET(0x60) bit 7, when set the P2SB will decode
* the High Performance Timer memory address range
* selected by bits 1:0
*/
pci_x86_write_config(pdev, HPTC_OFFSET, HPTC_ADDR_ENABLE_BIT,
PCI_SIZE_8);
/* Enable PCR Base address in PCH */
pci_x86_write_config(pdev, PCI_BASE_ADDRESS_0, plat->mmio_base,
PCI_SIZE_32);
pci_x86_write_config(pdev, PCI_BASE_ADDRESS_1, 0, PCI_SIZE_32);
/* Enable P2SB MSE */
pci_x86_write_config(pdev, PCI_COMMAND, PCI_COMMAND_MASTER |
PCI_COMMAND_MEMORY, PCI_SIZE_8);
return 0;
}
static int apl_p2sb_spl_init(struct udevice *dev)
{
/* Enable decoding for HPET. Needed for FSP global pointer storage */
dm_pci_write_config(dev, P2SB_HPTC, P2SB_HPTC_ADDRESS_SELECT_0 |
P2SB_HPTC_ADDRESS_ENABLE, PCI_SIZE_8);
return 0;
}
int apl_p2sb_ofdata_to_platdata(struct udevice *dev)
{
struct p2sb_uc_priv *upriv = dev_get_uclass_priv(dev);
struct p2sb_platdata *plat = dev_get_platdata(dev);
#if !CONFIG_IS_ENABLED(OF_PLATDATA)
int ret;
if (spl_phase() == PHASE_TPL) {
u32 base[2];
/* TPL sets up the initial BAR */
ret = dev_read_u32_array(dev, "early-regs", base,
ARRAY_SIZE(base));
if (ret)
return log_msg_ret("Missing/short early-regs", ret);
plat->mmio_base = base[0];
plat->bdf = pci_get_devfn(dev);
if (plat->bdf < 0)
return log_msg_ret("Cannot get p2sb PCI address",
plat->bdf);
} else {
plat->mmio_base = dev_read_addr_pci(dev);
/* Don't set BDF since it should not be used */
if (!plat->mmio_base || plat->mmio_base == FDT_ADDR_T_NONE)
return -EINVAL;
}
#else
plat->mmio_base = plat->dtplat.early_regs[0];
plat->bdf = pci_ofplat_get_devfn(plat->dtplat.reg[0]);
#endif
upriv->mmio_base = plat->mmio_base;
debug("p2sb: mmio_base=%x\n", (uint)plat->mmio_base);
return 0;
}
static int apl_p2sb_probe(struct udevice *dev)
{
if (spl_phase() == PHASE_TPL)
return apl_p2sb_early_init(dev);
else if (spl_phase() == PHASE_SPL)
return apl_p2sb_spl_init(dev);
return 0;
}
static int p2sb_child_post_bind(struct udevice *dev)
{
#if !CONFIG_IS_ENABLED(OF_PLATDATA)
struct p2sb_child_platdata *pplat = dev_get_parent_platdata(dev);
int ret;
u32 pid;
ret = dev_read_u32(dev, "intel,p2sb-port-id", &pid);
if (ret)
return ret;
pplat->pid = pid;
#endif
return 0;
}
static const struct udevice_id apl_p2sb_ids[] = {
{ .compatible = "intel,apl-p2sb" },
{ }
};
U_BOOT_DRIVER(apl_p2sb_drv) = {
.name = "intel_apl_p2sb",
.id = UCLASS_P2SB,
.of_match = apl_p2sb_ids,
.probe = apl_p2sb_probe,
.ofdata_to_platdata = apl_p2sb_ofdata_to_platdata,
.platdata_auto_alloc_size = sizeof(struct p2sb_platdata),
.per_child_platdata_auto_alloc_size =
sizeof(struct p2sb_child_platdata),
.child_post_bind = p2sb_child_post_bind,
};