mirror of
https://github.com/AsahiLinux/u-boot
synced 2024-11-18 10:48:51 +00:00
401d1c4f5d
Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
267 lines
6.3 KiB
C
267 lines
6.3 KiB
C
// SPDX-License-Identifier: GPL-2.0+
|
|
/*
|
|
* Copyright (C) 2015 Beckhoff Automation GmbH & Co. KG
|
|
* Patrick Bruenn <p.bruenn@beckhoff.com>
|
|
*
|
|
* Based on <u-boot>/board/freescale/mx53loco/mx53loco.c
|
|
* Copyright (C) 2011 Freescale Semiconductor, Inc.
|
|
*/
|
|
|
|
#include <common.h>
|
|
#include <cpu_func.h>
|
|
#include <init.h>
|
|
#include <asm/arch/sys_proto.h>
|
|
#include <asm/arch/clock.h>
|
|
#include <asm/arch/iomux-mx53.h>
|
|
#include <asm/global_data.h>
|
|
#include <asm/mach-imx/mx5_video.h>
|
|
#include <ACEX1K.h>
|
|
#include <asm/gpio.h>
|
|
#include <linux/delay.h>
|
|
|
|
enum LED_GPIOS {
|
|
GPIO_SD1_CD = IMX_GPIO_NR(1, 1),
|
|
GPIO_SD2_CD = IMX_GPIO_NR(1, 4),
|
|
GPIO_LED_SD2_R = IMX_GPIO_NR(3, 16),
|
|
GPIO_LED_SD2_B = IMX_GPIO_NR(3, 17),
|
|
GPIO_LED_SD2_G = IMX_GPIO_NR(3, 18),
|
|
GPIO_LED_SD1_R = IMX_GPIO_NR(3, 19),
|
|
GPIO_LED_SD1_B = IMX_GPIO_NR(3, 20),
|
|
GPIO_LED_SD1_G = IMX_GPIO_NR(3, 21),
|
|
GPIO_LED_PWR_R = IMX_GPIO_NR(3, 22),
|
|
GPIO_LED_PWR_B = IMX_GPIO_NR(3, 23),
|
|
GPIO_LED_PWR_G = IMX_GPIO_NR(3, 24),
|
|
GPIO_SUPS_INT = IMX_GPIO_NR(3, 31),
|
|
GPIO_C3_CONFIG = IMX_GPIO_NR(6, 8),
|
|
GPIO_C3_STATUS = IMX_GPIO_NR(6, 7),
|
|
GPIO_C3_DONE = IMX_GPIO_NR(6, 9),
|
|
};
|
|
|
|
#define CCAT_BASE_ADDR ((void *)0xf0000000)
|
|
#define CCAT_END_ADDR (CCAT_BASE_ADDR + (1024 * 1024 * 32))
|
|
#define CCAT_SIZE 1191788
|
|
#define CCAT_SIGN_ADDR (CCAT_BASE_ADDR + 12)
|
|
static const char CCAT_SIGNATURE[] = "CCAT";
|
|
|
|
static const u32 CCAT_MODE_CONFIG = 0x0024DC81;
|
|
static const u32 CCAT_MODE_RUN = 0x0033DC8F;
|
|
|
|
DECLARE_GLOBAL_DATA_PTR;
|
|
|
|
u32 get_board_rev(void)
|
|
{
|
|
struct iim_regs *iim = (struct iim_regs *)IMX_IIM_BASE;
|
|
struct fuse_bank *bank = &iim->bank[0];
|
|
struct fuse_bank0_regs *fuse =
|
|
(struct fuse_bank0_regs *)bank->fuse_regs;
|
|
|
|
int rev = readl(&fuse->gp[6]);
|
|
|
|
return (get_cpu_rev() & ~(0xF << 8)) | (rev & 0xF) << 8;
|
|
}
|
|
|
|
/*
|
|
* Set CCAT mode
|
|
* @mode: use CCAT_MODE_CONFIG or CCAT_MODE_RUN
|
|
*/
|
|
void weim_cs0_settings(u32 mode)
|
|
{
|
|
struct weim *weim_regs = (struct weim *)WEIM_BASE_ADDR;
|
|
|
|
writel(0x0, &weim_regs->cs0gcr1);
|
|
writel(mode, &weim_regs->cs0gcr1);
|
|
writel(0x00001002, &weim_regs->cs0gcr2);
|
|
|
|
writel(0x04000000, &weim_regs->cs0rcr1);
|
|
writel(0x00000000, &weim_regs->cs0rcr2);
|
|
|
|
writel(0x04000000, &weim_regs->cs0wcr1);
|
|
writel(0x00000000, &weim_regs->cs0wcr2);
|
|
}
|
|
|
|
static void setup_gpio_eim(void)
|
|
{
|
|
gpio_request(GPIO_C3_STATUS, "GPIO_C3_STATUS");
|
|
gpio_request(GPIO_C3_DONE, "GPIO_C3_DONE");
|
|
gpio_request(GPIO_C3_CONFIG, "GPIO_C3_CONFIG");
|
|
gpio_direction_input(GPIO_C3_STATUS);
|
|
gpio_direction_input(GPIO_C3_DONE);
|
|
gpio_direction_output(GPIO_C3_CONFIG, 1);
|
|
|
|
weim_cs0_settings(CCAT_MODE_RUN);
|
|
}
|
|
|
|
static void setup_gpio_sups(void)
|
|
{
|
|
gpio_request(GPIO_SUPS_INT, "GPIO_SUPS_INT");
|
|
gpio_direction_input(GPIO_SUPS_INT);
|
|
|
|
static const int BLINK_INTERVALL = 50000;
|
|
int status = 1;
|
|
while (gpio_get_value(GPIO_SUPS_INT)) {
|
|
/* signal "CX SUPS power fail" */
|
|
gpio_set_value(GPIO_LED_PWR_R,
|
|
(++status / BLINK_INTERVALL) % 2);
|
|
}
|
|
|
|
/* signal "CX power up" */
|
|
gpio_set_value(GPIO_LED_PWR_R, 1);
|
|
}
|
|
|
|
static void setup_gpio_leds(void)
|
|
{
|
|
gpio_request(GPIO_LED_SD2_R, "GPIO_LED_SD2_R");
|
|
gpio_request(GPIO_LED_SD2_B, "GPIO_LED_SD2_B");
|
|
gpio_request(GPIO_LED_SD2_G, "GPIO_LED_SD2_G");
|
|
gpio_request(GPIO_LED_SD1_R, "GPIO_LED_SD1_R");
|
|
gpio_request(GPIO_LED_SD1_B, "GPIO_LED_SD1_B");
|
|
gpio_request(GPIO_LED_SD1_G, "GPIO_LED_SD1_G");
|
|
gpio_request(GPIO_LED_PWR_R, "GPIO_LED_PWR_R");
|
|
gpio_request(GPIO_LED_PWR_B, "GPIO_LED_PWR_B");
|
|
gpio_request(GPIO_LED_PWR_G, "GPIO_LED_PWR_G");
|
|
|
|
gpio_direction_output(GPIO_LED_SD2_R, 0);
|
|
gpio_direction_output(GPIO_LED_SD2_B, 0);
|
|
gpio_direction_output(GPIO_LED_SD2_G, 0);
|
|
gpio_direction_output(GPIO_LED_SD1_R, 0);
|
|
gpio_direction_output(GPIO_LED_SD1_B, 0);
|
|
gpio_direction_output(GPIO_LED_SD1_G, 0);
|
|
gpio_direction_output(GPIO_LED_PWR_R, 0);
|
|
gpio_direction_output(GPIO_LED_PWR_B, 0);
|
|
gpio_direction_output(GPIO_LED_PWR_G, 0);
|
|
}
|
|
|
|
static int power_init(void)
|
|
{
|
|
/* nothing to do on CX9020 */
|
|
return 0;
|
|
}
|
|
|
|
static void clock_1GHz(void)
|
|
{
|
|
int ret;
|
|
u32 ref_clk = MXC_HCLK;
|
|
/*
|
|
* After increasing voltage to 1.25V, we can switch
|
|
* CPU clock to 1GHz and DDR to 400MHz safely
|
|
*/
|
|
ret = mxc_set_clock(ref_clk, 1000, MXC_ARM_CLK);
|
|
if (ret)
|
|
printf("CPU: Switch CPU clock to 1GHZ failed\n");
|
|
|
|
ret = mxc_set_clock(ref_clk, 400, MXC_PERIPH_CLK);
|
|
ret |= mxc_set_clock(ref_clk, 400, MXC_DDR_CLK);
|
|
if (ret)
|
|
printf("CPU: Switch DDR clock to 400MHz failed\n");
|
|
}
|
|
|
|
int board_early_init_f(void)
|
|
{
|
|
|
|
return 0;
|
|
}
|
|
|
|
int board_init(void)
|
|
{
|
|
gd->bd->bi_boot_params = PHYS_SDRAM_1 + 0x100;
|
|
|
|
mxc_set_sata_internal_clock();
|
|
|
|
setup_gpio_leds();
|
|
setup_gpio_sups();
|
|
setup_gpio_eim();
|
|
setup_iomux_lcd();
|
|
|
|
return 0;
|
|
}
|
|
|
|
int checkboard(void)
|
|
{
|
|
puts("Board: Beckhoff CX9020\n");
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int ccat_config_fn(int assert_config, int flush, int cookie)
|
|
{
|
|
/* prepare FPGA for programming */
|
|
weim_cs0_settings(CCAT_MODE_CONFIG);
|
|
gpio_set_value(GPIO_C3_CONFIG, 0);
|
|
udelay(1);
|
|
gpio_set_value(GPIO_C3_CONFIG, 1);
|
|
udelay(230);
|
|
|
|
return FPGA_SUCCESS;
|
|
}
|
|
|
|
static int ccat_status_fn(int cookie)
|
|
{
|
|
return FPGA_FAIL;
|
|
}
|
|
|
|
static int ccat_write_fn(const void *buf, size_t buf_len, int flush, int cookie)
|
|
{
|
|
const uint8_t *const buffer = buf;
|
|
|
|
/* program CCAT */
|
|
int i;
|
|
for (i = 0; i < buf_len; ++i)
|
|
writeb(buffer[i], CCAT_BASE_ADDR);
|
|
|
|
writeb(0xff, CCAT_BASE_ADDR);
|
|
writeb(0xff, CCAT_BASE_ADDR);
|
|
|
|
return FPGA_SUCCESS;
|
|
}
|
|
|
|
static int ccat_done_fn(int cookie)
|
|
{
|
|
/* programming complete? */
|
|
return gpio_get_value(GPIO_C3_DONE);
|
|
}
|
|
|
|
static int ccat_post_fn(int cookie)
|
|
{
|
|
/* switch to FPGA run mode */
|
|
weim_cs0_settings(CCAT_MODE_RUN);
|
|
invalidate_dcache_range((ulong) CCAT_BASE_ADDR, (ulong) CCAT_END_ADDR);
|
|
|
|
if (memcmp(CCAT_SIGN_ADDR, CCAT_SIGNATURE, sizeof(CCAT_SIGNATURE))) {
|
|
printf("Verifing CCAT firmware failed, signature not found\n");
|
|
return FPGA_FAIL;
|
|
}
|
|
|
|
/* signal "CX booting OS" */
|
|
gpio_set_value(GPIO_LED_PWR_R, 1);
|
|
gpio_set_value(GPIO_LED_PWR_G, 1);
|
|
gpio_set_value(GPIO_LED_PWR_B, 0);
|
|
return FPGA_SUCCESS;
|
|
}
|
|
|
|
static Altera_CYC2_Passive_Serial_fns ccat_fns = {
|
|
.config = ccat_config_fn,
|
|
.status = ccat_status_fn,
|
|
.done = ccat_done_fn,
|
|
.write = ccat_write_fn,
|
|
.abort = ccat_post_fn,
|
|
.post = ccat_post_fn,
|
|
};
|
|
|
|
static Altera_desc ccat_fpga = {
|
|
.family = Altera_CYC2,
|
|
.iface = passive_serial,
|
|
.size = CCAT_SIZE,
|
|
.iface_fns = &ccat_fns,
|
|
.base = CCAT_BASE_ADDR,
|
|
};
|
|
|
|
int board_late_init(void)
|
|
{
|
|
if (!power_init())
|
|
clock_1GHz();
|
|
|
|
fpga_init();
|
|
fpga_add(fpga_altera, &ccat_fpga);
|
|
|
|
return 0;
|
|
}
|