mirror of
https://github.com/AsahiLinux/u-boot
synced 2024-11-24 21:54:01 +00:00
c5b42e3e9e
The NETSEC GMAC occasionally falls into a weird state where MAC_REG_DESC_SOFT_RST has never been cleared and shows errors like the below when networking commands are issued: => ping 192.168.1.1 ethernet@522d0000 Waiting for PHY auto negotiation to complete... done netsec_wait_while_busy: timeout Using ethernet@522d0000 device ARP Retry count exceeded; starting again ping failed; host 192.168.1.1 is not alive It happens on not only 'ping' but also 'dhcp', 'tftp' and so on. Luckily, restarting the NETSEC GMAC and trying again seems to fix the problematic state. So first ensure that we haven't entered the state by checking MAC_REG_DESC_SOFT_RST to be cleared; otherwise, restarting NETSEC/PHY and trying again would work as a workaround. Signed-off-by: Ryosuke Saito <ryosuke.saito@linaro.org> Tested-by: Masahisa Kojima <masahisa.kojima@linaro.org>
1151 lines
29 KiB
C
1151 lines
29 KiB
C
// SPDX-License-Identifier: GPL-2.0+
|
|
/**
|
|
* netsec.c - Socionext Synquacer Netsec driver
|
|
* Copyright 2021 Linaro Ltd.
|
|
*/
|
|
|
|
#include <clk.h>
|
|
#include <cpu_func.h>
|
|
#include <dm.h>
|
|
#include <fdt_support.h>
|
|
#include <log.h>
|
|
#include <malloc.h>
|
|
#include <miiphy.h>
|
|
#include <net.h>
|
|
#include <regmap.h>
|
|
#include <reset.h>
|
|
#include <syscon.h>
|
|
#include <asm/cache.h>
|
|
#include <asm/global_data.h>
|
|
#include <dm/device_compat.h>
|
|
#include <linux/bitops.h>
|
|
#include <linux/delay.h>
|
|
#include <linux/err.h>
|
|
#include <linux/io.h>
|
|
#include <linux/iopoll.h>
|
|
#include <spi.h>
|
|
#include <spi_flash.h>
|
|
|
|
#define NETSEC_REG_SOFT_RST 0x104
|
|
#define NETSEC_REG_COM_INIT 0x120
|
|
|
|
#define NETSEC_REG_TOP_STATUS 0x200
|
|
#define NETSEC_IRQ_RX BIT(1)
|
|
#define NETSEC_IRQ_TX BIT(0)
|
|
|
|
#define NETSEC_REG_TOP_INTEN 0x204
|
|
#define NETSEC_REG_INTEN_SET 0x234
|
|
#define NETSEC_REG_INTEN_CLR 0x238
|
|
|
|
#define NETSEC_REG_NRM_TX_STATUS 0x400
|
|
#define NETSEC_REG_NRM_TX_INTEN 0x404
|
|
#define NETSEC_REG_NRM_TX_INTEN_SET 0x428
|
|
#define NETSEC_REG_NRM_TX_INTEN_CLR 0x42c
|
|
#define NRM_TX_ST_NTOWNR BIT(17)
|
|
#define NRM_TX_ST_TR_ERR BIT(16)
|
|
#define NRM_TX_ST_TXDONE BIT(15)
|
|
#define NRM_TX_ST_TMREXP BIT(14)
|
|
|
|
#define NETSEC_REG_NRM_RX_STATUS 0x440
|
|
#define NETSEC_REG_NRM_RX_INTEN 0x444
|
|
#define NETSEC_REG_NRM_RX_INTEN_SET 0x468
|
|
#define NETSEC_REG_NRM_RX_INTEN_CLR 0x46c
|
|
#define NRM_RX_ST_RC_ERR BIT(16)
|
|
#define NRM_RX_ST_PKTCNT BIT(15)
|
|
#define NRM_RX_ST_TMREXP BIT(14)
|
|
|
|
#define NETSEC_REG_PKT_CMD_BUF 0xd0
|
|
|
|
#define NETSEC_REG_CLK_EN 0x100
|
|
|
|
#define NETSEC_REG_PKT_CTRL 0x140
|
|
|
|
#define NETSEC_REG_DMA_TMR_CTRL 0x20c
|
|
#define NETSEC_REG_F_TAIKI_MC_VER 0x22c
|
|
#define NETSEC_REG_F_TAIKI_VER 0x230
|
|
#define NETSEC_REG_DMA_HM_CTRL 0x214
|
|
#define NETSEC_REG_DMA_MH_CTRL 0x220
|
|
#define NETSEC_REG_ADDR_DIS_CORE 0x218
|
|
#define NETSEC_REG_DMAC_HM_CMD_BUF 0x210
|
|
#define NETSEC_REG_DMAC_MH_CMD_BUF 0x21c
|
|
|
|
#define NETSEC_REG_NRM_TX_PKTCNT 0x410
|
|
|
|
#define NETSEC_REG_NRM_TX_DONE_PKTCNT 0x414
|
|
#define NETSEC_REG_NRM_TX_DONE_TXINT_PKTCNT 0x418
|
|
|
|
#define NETSEC_REG_NRM_TX_TMR 0x41c
|
|
|
|
#define NETSEC_REG_NRM_RX_PKTCNT 0x454
|
|
#define NETSEC_REG_NRM_RX_RXINT_PKTCNT 0x458
|
|
#define NETSEC_REG_NRM_TX_TXINT_TMR 0x420
|
|
#define NETSEC_REG_NRM_RX_RXINT_TMR 0x460
|
|
|
|
#define NETSEC_REG_NRM_RX_TMR 0x45c
|
|
|
|
#define NETSEC_REG_NRM_TX_DESC_START_UP 0x434
|
|
#define NETSEC_REG_NRM_TX_DESC_START_LW 0x408
|
|
#define NETSEC_REG_NRM_RX_DESC_START_UP 0x474
|
|
#define NETSEC_REG_NRM_RX_DESC_START_LW 0x448
|
|
|
|
#define NETSEC_REG_NRM_TX_CONFIG 0x430
|
|
#define NETSEC_REG_NRM_RX_CONFIG 0x470
|
|
|
|
#define MAC_REG_STATUS 0x1024
|
|
#define MAC_REG_DATA 0x11c0
|
|
#define MAC_REG_CMD 0x11c4
|
|
#define MAC_REG_FLOW_TH 0x11cc
|
|
#define MAC_REG_INTF_SEL 0x11d4
|
|
#define MAC_REG_DESC_INIT 0x11fc
|
|
#define MAC_REG_DESC_SOFT_RST 0x1204
|
|
#define NETSEC_REG_MODE_TRANS_COMP_STATUS 0x500
|
|
|
|
#define GMAC_REG_MCR 0x0000
|
|
#define GMAC_REG_MFFR 0x0004
|
|
#define GMAC_REG_GAR 0x0010
|
|
#define GMAC_REG_GDR 0x0014
|
|
#define GMAC_REG_FCR 0x0018
|
|
#define GMAC_REG_BMR 0x1000
|
|
#define GMAC_REG_RDLAR 0x100c
|
|
#define GMAC_REG_TDLAR 0x1010
|
|
#define GMAC_REG_OMR 0x1018
|
|
|
|
#define MHZ(n) ((n) * 1000 * 1000)
|
|
|
|
#define NETSEC_TX_SHIFT_OWN_FIELD 31
|
|
#define NETSEC_TX_SHIFT_LD_FIELD 30
|
|
#define NETSEC_TX_SHIFT_DRID_FIELD 24
|
|
#define NETSEC_TX_SHIFT_PT_FIELD 21
|
|
#define NETSEC_TX_SHIFT_TDRID_FIELD 16
|
|
#define NETSEC_TX_SHIFT_CC_FIELD 15
|
|
#define NETSEC_TX_SHIFT_FS_FIELD 9
|
|
#define NETSEC_TX_LAST 8
|
|
#define NETSEC_TX_SHIFT_CO 7
|
|
#define NETSEC_TX_SHIFT_SO 6
|
|
#define NETSEC_TX_SHIFT_TRS_FIELD 4
|
|
|
|
#define NETSEC_RX_PKT_OWN_FIELD 31
|
|
#define NETSEC_RX_PKT_LD_FIELD 30
|
|
#define NETSEC_RX_PKT_SDRID_FIELD 24
|
|
#define NETSEC_RX_PKT_FR_FIELD 23
|
|
#define NETSEC_RX_PKT_ER_FIELD 21
|
|
#define NETSEC_RX_PKT_ERR_FIELD 16
|
|
#define NETSEC_RX_PKT_TDRID_FIELD 12
|
|
#define NETSEC_RX_PKT_FS_FIELD 9
|
|
#define NETSEC_RX_PKT_LS_FIELD 8
|
|
#define NETSEC_RX_PKT_CO_FIELD 6
|
|
|
|
#define NETSEC_RX_PKT_ERR_MASK 3
|
|
|
|
#define NETSEC_MAX_TX_PKT_LEN 1518
|
|
#define NETSEC_MAX_TX_JUMBO_PKT_LEN 9018
|
|
|
|
#define NETSEC_RING_GMAC 15
|
|
#define NETSEC_RING_MAX 2
|
|
|
|
#define NETSEC_TCP_SEG_LEN_MAX 1460
|
|
#define NETSEC_TCP_JUMBO_SEG_LEN_MAX 8960
|
|
|
|
#define NETSEC_RX_CKSUM_NOTAVAIL 0
|
|
#define NETSEC_RX_CKSUM_OK 1
|
|
#define NETSEC_RX_CKSUM_NG 2
|
|
|
|
#define NETSEC_TOP_IRQ_REG_ME_START BIT(20)
|
|
#define NETSEC_IRQ_TRANSITION_COMPLETE BIT(4)
|
|
|
|
#define NETSEC_MODE_TRANS_COMP_IRQ_N2T BIT(20)
|
|
#define NETSEC_MODE_TRANS_COMP_IRQ_T2N BIT(19)
|
|
|
|
#define NETSEC_INT_PKTCNT_MAX 2047
|
|
|
|
#define NETSEC_FLOW_START_TH_MAX 95
|
|
#define NETSEC_FLOW_STOP_TH_MAX 95
|
|
#define NETSEC_FLOW_PAUSE_TIME_MIN 5
|
|
|
|
#define NETSEC_CLK_EN_REG_DOM_ALL 0x3f
|
|
|
|
#define NETSEC_PKT_CTRL_REG_MODE_NRM BIT(28)
|
|
#define NETSEC_PKT_CTRL_REG_EN_JUMBO BIT(27)
|
|
#define NETSEC_PKT_CTRL_REG_LOG_CHKSUM_ER BIT(3)
|
|
#define NETSEC_PKT_CTRL_REG_LOG_HD_INCOMPLETE BIT(2)
|
|
#define NETSEC_PKT_CTRL_REG_LOG_HD_ER BIT(1)
|
|
#define NETSEC_PKT_CTRL_REG_DRP_NO_MATCH BIT(0)
|
|
|
|
#define NETSEC_CLK_EN_REG_DOM_G BIT(5)
|
|
#define NETSEC_CLK_EN_REG_DOM_C BIT(1)
|
|
#define NETSEC_CLK_EN_REG_DOM_D BIT(0)
|
|
|
|
#define NETSEC_COM_INIT_REG_DB BIT(2)
|
|
#define NETSEC_COM_INIT_REG_CLS BIT(1)
|
|
#define NETSEC_COM_INIT_REG_ALL (NETSEC_COM_INIT_REG_CLS | \
|
|
NETSEC_COM_INIT_REG_DB)
|
|
|
|
#define NETSEC_SOFT_RST_REG_RESET 0
|
|
#define NETSEC_SOFT_RST_REG_RUN BIT(31)
|
|
|
|
#define NETSEC_DMA_CTRL_REG_STOP 1
|
|
#define MH_CTRL__MODE_TRANS BIT(20)
|
|
|
|
#define NETSEC_GMAC_CMD_ST_READ 0
|
|
#define NETSEC_GMAC_CMD_ST_WRITE BIT(28)
|
|
#define NETSEC_GMAC_CMD_ST_BUSY BIT(31)
|
|
|
|
#define NETSEC_GMAC_BMR_REG_COMMON 0x00412080
|
|
#define NETSEC_GMAC_BMR_REG_RESET 0x00020181
|
|
#define NETSEC_GMAC_BMR_REG_SWR 0x00000001
|
|
|
|
#define NETSEC_GMAC_OMR_REG_ST BIT(13)
|
|
#define NETSEC_GMAC_OMR_REG_SR BIT(1)
|
|
|
|
#define NETSEC_GMAC_MCR_REG_IBN BIT(30)
|
|
#define NETSEC_GMAC_MCR_REG_CST BIT(25)
|
|
#define NETSEC_GMAC_MCR_REG_JE BIT(20)
|
|
#define NETSEC_MCR_PS BIT(15)
|
|
#define NETSEC_GMAC_MCR_REG_FES BIT(14)
|
|
#define NETSEC_GMAC_MCR_REG_FULL_DUPLEX_COMMON 0x0000280c
|
|
#define NETSEC_GMAC_MCR_REG_HALF_DUPLEX_COMMON 0x0001a00c
|
|
|
|
#define NETSEC_FCR_RFE BIT(2)
|
|
#define NETSEC_FCR_TFE BIT(1)
|
|
|
|
#define NETSEC_GMAC_GAR_REG_GW BIT(1)
|
|
#define NETSEC_GMAC_GAR_REG_GB BIT(0)
|
|
|
|
#define NETSEC_GMAC_GAR_REG_SHIFT_PA 11
|
|
#define NETSEC_GMAC_GAR_REG_SHIFT_GR 6
|
|
#define GMAC_REG_SHIFT_CR_GAR 2
|
|
|
|
#define NETSEC_GMAC_GAR_REG_CR_25_35_MHZ 2
|
|
#define NETSEC_GMAC_GAR_REG_CR_35_60_MHZ 3
|
|
#define NETSEC_GMAC_GAR_REG_CR_60_100_MHZ 0
|
|
#define NETSEC_GMAC_GAR_REG_CR_100_150_MHZ 1
|
|
#define NETSEC_GMAC_GAR_REG_CR_150_250_MHZ 4
|
|
#define NETSEC_GMAC_GAR_REG_CR_250_300_MHZ 5
|
|
|
|
#define NETSEC_GMAC_RDLAR_REG_COMMON 0x18000
|
|
#define NETSEC_GMAC_TDLAR_REG_COMMON 0x1c000
|
|
|
|
#define NETSEC_REG_NETSEC_VER_F_TAIKI 0x50000
|
|
|
|
#define NETSEC_REG_DESC_RING_CONFIG_CFG_UP BIT(31)
|
|
#define NETSEC_REG_DESC_RING_CONFIG_CH_RST BIT(30)
|
|
#define NETSEC_REG_DESC_TMR_MODE 4
|
|
#define NETSEC_REG_DESC_ENDIAN 0
|
|
|
|
#define NETSEC_MAC_DESC_SOFT_RST_SOFT_RST 1
|
|
#define NETSEC_MAC_DESC_INIT_REG_INIT 1
|
|
|
|
#define NETSEC_EEPROM_MAC_ADDRESS 0x00
|
|
#define NETSEC_EEPROM_HM_ME_ADDRESS_H 0x08
|
|
#define NETSEC_EEPROM_HM_ME_ADDRESS_L 0x0C
|
|
#define NETSEC_EEPROM_HM_ME_SIZE 0x10
|
|
#define NETSEC_EEPROM_MH_ME_ADDRESS_H 0x14
|
|
#define NETSEC_EEPROM_MH_ME_ADDRESS_L 0x18
|
|
#define NETSEC_EEPROM_MH_ME_SIZE 0x1C
|
|
#define NETSEC_EEPROM_PKT_ME_ADDRESS 0x20
|
|
#define NETSEC_EEPROM_PKT_ME_SIZE 0x24
|
|
|
|
#define DESC_SZ sizeof(struct netsec_de)
|
|
|
|
#define NETSEC_F_NETSEC_VER_MAJOR_NUM(x) ((x) & 0xffff0000)
|
|
|
|
#define EERPROM_MAP_OFFSET 0x8000000
|
|
#define NOR_BLOCK 1024
|
|
|
|
struct netsec_de { /* Netsec Descriptor layout */
|
|
u32 attr;
|
|
u32 data_buf_addr_up;
|
|
u32 data_buf_addr_lw;
|
|
u32 buf_len_info;
|
|
};
|
|
|
|
struct netsec_priv {
|
|
struct netsec_de rxde[PKTBUFSRX];
|
|
struct netsec_de txde[1];
|
|
u16 rxat;
|
|
|
|
phys_addr_t eeprom_base;
|
|
phys_addr_t ioaddr;
|
|
|
|
struct mii_dev *bus;
|
|
struct phy_device *phydev;
|
|
u32 phy_addr, freq;
|
|
int phy_mode;
|
|
int max_speed;
|
|
};
|
|
|
|
struct netsec_tx_pkt_ctrl {
|
|
u16 tcp_seg_len;
|
|
bool tcp_seg_offload_flag;
|
|
bool cksum_offload_flag;
|
|
};
|
|
|
|
struct netsec_rx_pkt_info {
|
|
int rx_cksum_result;
|
|
int err_code;
|
|
bool err_flag;
|
|
};
|
|
|
|
static int netsec_reset_hardware(struct netsec_priv *priv, bool load_ucode);
|
|
|
|
static void netsec_write_reg(struct netsec_priv *priv, u32 reg_addr, u32 val)
|
|
{
|
|
writel(val, priv->ioaddr + reg_addr);
|
|
}
|
|
|
|
static u32 netsec_read_reg(struct netsec_priv *priv, u32 reg_addr)
|
|
{
|
|
return readl(priv->ioaddr + reg_addr);
|
|
}
|
|
|
|
/************* MDIO BUS OPS FOLLOW *************/
|
|
|
|
#define TIMEOUT_SPINS_MAC 1000
|
|
#define TIMEOUT_SECONDARY_MS_MAC 100
|
|
|
|
static u32 netsec_clk_type(u32 freq)
|
|
{
|
|
if (freq < MHZ(35))
|
|
return NETSEC_GMAC_GAR_REG_CR_25_35_MHZ;
|
|
if (freq < MHZ(60))
|
|
return NETSEC_GMAC_GAR_REG_CR_35_60_MHZ;
|
|
if (freq < MHZ(100))
|
|
return NETSEC_GMAC_GAR_REG_CR_60_100_MHZ;
|
|
if (freq < MHZ(150))
|
|
return NETSEC_GMAC_GAR_REG_CR_100_150_MHZ;
|
|
if (freq < MHZ(250))
|
|
return NETSEC_GMAC_GAR_REG_CR_150_250_MHZ;
|
|
|
|
return NETSEC_GMAC_GAR_REG_CR_250_300_MHZ;
|
|
}
|
|
|
|
static int netsec_wait_while_busy(struct netsec_priv *priv, u32 addr, u32 mask)
|
|
{
|
|
u32 timeout = TIMEOUT_SPINS_MAC;
|
|
|
|
while (--timeout && netsec_read_reg(priv, addr) & mask)
|
|
cpu_relax();
|
|
if (timeout)
|
|
return 0;
|
|
|
|
timeout = TIMEOUT_SECONDARY_MS_MAC;
|
|
while (--timeout && netsec_read_reg(priv, addr) & mask)
|
|
udelay(2000);
|
|
|
|
if (timeout)
|
|
return 0;
|
|
|
|
pr_err("%s: timeout\n", __func__);
|
|
|
|
return -ETIMEDOUT;
|
|
}
|
|
|
|
static int netsec_set_mac_reg(struct netsec_priv *priv, u32 addr, u32 value)
|
|
{
|
|
netsec_write_reg(priv, MAC_REG_DATA, value);
|
|
netsec_write_reg(priv, MAC_REG_CMD, addr | NETSEC_GMAC_CMD_ST_WRITE);
|
|
return netsec_wait_while_busy(priv,
|
|
MAC_REG_CMD, NETSEC_GMAC_CMD_ST_BUSY);
|
|
}
|
|
|
|
static int netsec_get_mac_reg(struct netsec_priv *priv, u32 addr, u32 *read)
|
|
{
|
|
int ret;
|
|
|
|
netsec_write_reg(priv, MAC_REG_CMD, addr | NETSEC_GMAC_CMD_ST_READ);
|
|
ret = netsec_wait_while_busy(priv,
|
|
MAC_REG_CMD, NETSEC_GMAC_CMD_ST_BUSY);
|
|
if (ret)
|
|
return ret;
|
|
|
|
*read = netsec_read_reg(priv, MAC_REG_DATA);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int netsec_mac_wait_while_busy(struct netsec_priv *priv,
|
|
u32 addr, u32 mask)
|
|
{
|
|
u32 timeout = TIMEOUT_SPINS_MAC;
|
|
u32 data;
|
|
int ret;
|
|
|
|
do {
|
|
ret = netsec_get_mac_reg(priv, addr, &data);
|
|
if (ret)
|
|
break;
|
|
udelay(1);
|
|
} while (--timeout && (data & mask));
|
|
|
|
if (timeout)
|
|
return 0;
|
|
|
|
timeout = TIMEOUT_SECONDARY_MS_MAC;
|
|
do {
|
|
udelay(2000);
|
|
|
|
ret = netsec_get_mac_reg(priv, addr, &data);
|
|
if (ret)
|
|
break;
|
|
cpu_relax();
|
|
} while (--timeout && (data & mask));
|
|
|
|
if (timeout && !ret)
|
|
return 0;
|
|
|
|
return -ETIMEDOUT;
|
|
}
|
|
|
|
static void netsec_cache_invalidate(uintptr_t vaddr, int len)
|
|
{
|
|
invalidate_dcache_range(rounddown(vaddr, ARCH_DMA_MINALIGN),
|
|
roundup(vaddr + len, ARCH_DMA_MINALIGN));
|
|
}
|
|
|
|
static void netsec_cache_flush(uintptr_t vaddr, int len)
|
|
{
|
|
flush_dcache_range(rounddown(vaddr, ARCH_DMA_MINALIGN),
|
|
roundup(vaddr + len, ARCH_DMA_MINALIGN));
|
|
}
|
|
|
|
static void netsec_set_rx_de(struct netsec_priv *priv, u16 idx, void *addr)
|
|
{
|
|
struct netsec_de *de = &priv->rxde[idx];
|
|
u32 attr = (1 << NETSEC_RX_PKT_OWN_FIELD) |
|
|
(1 << NETSEC_RX_PKT_FS_FIELD) |
|
|
(1 << NETSEC_RX_PKT_LS_FIELD);
|
|
|
|
if (idx == PKTBUFSRX - 1)
|
|
attr |= (1 << NETSEC_RX_PKT_LD_FIELD);
|
|
|
|
de->data_buf_addr_up = upper_32_bits((dma_addr_t)addr);
|
|
de->data_buf_addr_lw = lower_32_bits((dma_addr_t)addr);
|
|
de->buf_len_info = PKTSIZE;
|
|
de->attr = attr;
|
|
dmb();
|
|
netsec_cache_flush((uintptr_t)de, sizeof(*de));
|
|
}
|
|
|
|
static void netsec_set_tx_de(struct netsec_priv *priv, void *addr, int len)
|
|
{
|
|
struct netsec_de *de = &priv->txde[0];
|
|
u32 attr;
|
|
|
|
attr = (1 << NETSEC_TX_SHIFT_OWN_FIELD) |
|
|
(1 << NETSEC_TX_SHIFT_PT_FIELD) |
|
|
(NETSEC_RING_GMAC << NETSEC_TX_SHIFT_TDRID_FIELD) |
|
|
(1 << NETSEC_TX_SHIFT_FS_FIELD) |
|
|
(1 << NETSEC_TX_LAST) |
|
|
(1 << NETSEC_TX_SHIFT_TRS_FIELD) |
|
|
(1 << NETSEC_TX_SHIFT_LD_FIELD);
|
|
|
|
de->data_buf_addr_up = upper_32_bits((dma_addr_t)addr);
|
|
de->data_buf_addr_lw = lower_32_bits((dma_addr_t)addr);
|
|
de->buf_len_info = len;
|
|
de->attr = attr;
|
|
dmb();
|
|
netsec_cache_flush((uintptr_t)de, sizeof(*de));
|
|
}
|
|
|
|
static int netsec_get_phy_reg(struct netsec_priv *priv,
|
|
int phy_addr, int reg_addr)
|
|
{
|
|
u32 data;
|
|
int ret;
|
|
|
|
if (phy_addr != 7)
|
|
return -EINVAL;
|
|
|
|
if (netsec_set_mac_reg(priv, GMAC_REG_GAR, NETSEC_GMAC_GAR_REG_GB |
|
|
phy_addr << NETSEC_GMAC_GAR_REG_SHIFT_PA |
|
|
reg_addr << NETSEC_GMAC_GAR_REG_SHIFT_GR |
|
|
(netsec_clk_type(priv->freq) <<
|
|
GMAC_REG_SHIFT_CR_GAR)))
|
|
return -ETIMEDOUT;
|
|
|
|
ret = netsec_mac_wait_while_busy(priv, GMAC_REG_GAR,
|
|
NETSEC_GMAC_GAR_REG_GB);
|
|
if (ret)
|
|
return ret;
|
|
|
|
ret = netsec_get_mac_reg(priv, GMAC_REG_GDR, &data);
|
|
if (ret)
|
|
return ret;
|
|
|
|
return data;
|
|
}
|
|
|
|
static int netsec_set_phy_reg(struct netsec_priv *priv,
|
|
int phy_addr, int reg_addr, u16 val)
|
|
{
|
|
int ret;
|
|
|
|
if (phy_addr != 7)
|
|
return -EINVAL;
|
|
if (netsec_set_mac_reg(priv, GMAC_REG_GDR, val))
|
|
return -ETIMEDOUT;
|
|
|
|
if (netsec_set_mac_reg(priv, GMAC_REG_GAR,
|
|
phy_addr << NETSEC_GMAC_GAR_REG_SHIFT_PA |
|
|
reg_addr << NETSEC_GMAC_GAR_REG_SHIFT_GR |
|
|
NETSEC_GMAC_GAR_REG_GW | NETSEC_GMAC_GAR_REG_GB |
|
|
(netsec_clk_type(priv->freq) <<
|
|
GMAC_REG_SHIFT_CR_GAR)))
|
|
return -ETIMEDOUT;
|
|
|
|
ret = netsec_mac_wait_while_busy(priv, GMAC_REG_GAR,
|
|
NETSEC_GMAC_GAR_REG_GB);
|
|
|
|
/* Developerbox implements RTL8211E PHY and there is
|
|
* a compatibility problem with F_GMAC4.
|
|
* RTL8211E expects MDC clock must be kept toggling for several
|
|
* clock cycle with MDIO high before entering the IDLE state.
|
|
* To meet this requirement, netsec driver needs to issue dummy
|
|
* read(e.g. read PHYID1(offset 0x2) register) right after write.
|
|
*/
|
|
netsec_get_phy_reg(priv, phy_addr, MII_PHYSID1);
|
|
|
|
return ret;
|
|
}
|
|
|
|
static int netsec_mac_update_to_phy_state(struct netsec_priv *priv)
|
|
{
|
|
struct phy_device *phydev = priv->phydev;
|
|
u32 value = 0;
|
|
|
|
value = phydev->duplex ? NETSEC_GMAC_MCR_REG_FULL_DUPLEX_COMMON :
|
|
NETSEC_GMAC_MCR_REG_HALF_DUPLEX_COMMON;
|
|
|
|
if (phydev->speed != SPEED_1000)
|
|
value |= NETSEC_MCR_PS;
|
|
|
|
if (phydev->interface != PHY_INTERFACE_MODE_GMII &&
|
|
phydev->speed == SPEED_100)
|
|
value |= NETSEC_GMAC_MCR_REG_FES;
|
|
|
|
value |= NETSEC_GMAC_MCR_REG_CST | NETSEC_GMAC_MCR_REG_JE;
|
|
|
|
if (phy_interface_is_rgmii(phydev))
|
|
value |= NETSEC_GMAC_MCR_REG_IBN;
|
|
|
|
if (netsec_set_mac_reg(priv, GMAC_REG_MCR, value))
|
|
return -ETIMEDOUT;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int netsec_reset_gmac(struct netsec_priv *priv)
|
|
{
|
|
u32 value = 0;
|
|
int ret;
|
|
|
|
if (netsec_set_mac_reg(priv, GMAC_REG_BMR,
|
|
NETSEC_GMAC_BMR_REG_RESET))
|
|
return -ETIMEDOUT;
|
|
|
|
/* Wait soft reset */
|
|
mdelay(5);
|
|
|
|
ret = netsec_get_mac_reg(priv, GMAC_REG_BMR, &value);
|
|
if (ret)
|
|
return ret;
|
|
|
|
if (value & NETSEC_GMAC_BMR_REG_SWR)
|
|
return -EAGAIN;
|
|
|
|
/**
|
|
* NETSEC GMAC sometimes shows the peculiar behaviour where
|
|
* MAC_REG_DESC_SOFT_RST never been cleared, resulting in the loss of
|
|
* sending packets.
|
|
*
|
|
* Workaround:
|
|
* Restart NETSEC and PHY, retry again.
|
|
*/
|
|
netsec_write_reg(priv, MAC_REG_DESC_SOFT_RST, 1);
|
|
udelay(1000);
|
|
if (netsec_read_reg(priv, MAC_REG_DESC_SOFT_RST)) {
|
|
phy_shutdown(priv->phydev);
|
|
netsec_reset_hardware(priv, false);
|
|
phy_startup(priv->phydev);
|
|
return -EAGAIN;
|
|
}
|
|
return 0;
|
|
}
|
|
|
|
static int netsec_start_gmac(struct netsec_priv *priv)
|
|
{
|
|
u32 value = 0;
|
|
u32 failure = 0;
|
|
int ret;
|
|
|
|
if (priv->max_speed != SPEED_1000)
|
|
value = (NETSEC_GMAC_MCR_REG_CST |
|
|
NETSEC_GMAC_MCR_REG_HALF_DUPLEX_COMMON);
|
|
|
|
if (netsec_set_mac_reg(priv, GMAC_REG_MCR, value))
|
|
return -ETIMEDOUT;
|
|
|
|
/* Reset GMAC */
|
|
while ((ret = netsec_reset_gmac(priv)) == -EAGAIN && ++failure < 3)
|
|
;
|
|
|
|
if (ret) {
|
|
pr_err("%s: failed to reset gmac(err=%d).\n", __func__, ret);
|
|
return ret;
|
|
}
|
|
|
|
netsec_write_reg(priv, MAC_REG_DESC_INIT, 1);
|
|
if (netsec_wait_while_busy(priv, MAC_REG_DESC_INIT, 1))
|
|
return -ETIMEDOUT;
|
|
|
|
if (netsec_set_mac_reg(priv, GMAC_REG_BMR,
|
|
NETSEC_GMAC_BMR_REG_COMMON))
|
|
return -ETIMEDOUT;
|
|
|
|
if (netsec_set_mac_reg(priv, GMAC_REG_RDLAR,
|
|
NETSEC_GMAC_RDLAR_REG_COMMON))
|
|
return -ETIMEDOUT;
|
|
|
|
if (netsec_set_mac_reg(priv, GMAC_REG_TDLAR,
|
|
NETSEC_GMAC_TDLAR_REG_COMMON))
|
|
return -ETIMEDOUT;
|
|
|
|
if (netsec_set_mac_reg(priv, GMAC_REG_MFFR, 0x80000001))
|
|
return -ETIMEDOUT;
|
|
|
|
ret = netsec_mac_update_to_phy_state(priv);
|
|
if (ret)
|
|
return ret;
|
|
|
|
ret = netsec_get_mac_reg(priv, GMAC_REG_OMR, &value);
|
|
if (ret)
|
|
return ret;
|
|
|
|
value |= NETSEC_GMAC_OMR_REG_SR;
|
|
value |= NETSEC_GMAC_OMR_REG_ST;
|
|
|
|
netsec_write_reg(priv, NETSEC_REG_NRM_RX_INTEN_CLR, ~0);
|
|
netsec_write_reg(priv, NETSEC_REG_NRM_TX_INTEN_CLR, ~0);
|
|
|
|
if (netsec_set_mac_reg(priv, GMAC_REG_OMR, value))
|
|
return -ETIMEDOUT;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int netsec_stop_gmac(struct netsec_priv *priv)
|
|
{
|
|
u32 value;
|
|
int ret;
|
|
|
|
ret = netsec_get_mac_reg(priv, GMAC_REG_OMR, &value);
|
|
if (ret)
|
|
return ret;
|
|
value &= ~NETSEC_GMAC_OMR_REG_SR;
|
|
value &= ~NETSEC_GMAC_OMR_REG_ST;
|
|
|
|
/* disable all interrupts */
|
|
netsec_write_reg(priv, NETSEC_REG_NRM_RX_INTEN_CLR, ~0);
|
|
netsec_write_reg(priv, NETSEC_REG_NRM_TX_INTEN_CLR, ~0);
|
|
|
|
return netsec_set_mac_reg(priv, GMAC_REG_OMR, value);
|
|
}
|
|
|
|
static void netsec_spi_read(char *buf, loff_t len, loff_t offset)
|
|
{
|
|
struct spi_flash *flash;
|
|
|
|
flash = spi_flash_probe(CONFIG_SF_DEFAULT_BUS, CONFIG_SF_DEFAULT_CS,
|
|
CONFIG_SF_DEFAULT_SPEED, CONFIG_SF_DEFAULT_MODE);
|
|
|
|
spi_flash_read(flash, offset, len, buf);
|
|
}
|
|
|
|
static int netsec_read_rom_hwaddr(struct udevice *dev)
|
|
{
|
|
struct netsec_priv *priv = dev_get_priv(dev);
|
|
struct eth_pdata *pdata = dev_get_plat(dev);
|
|
char macp[NOR_BLOCK];
|
|
|
|
netsec_spi_read(macp, sizeof(macp), priv->eeprom_base);
|
|
|
|
pdata->enetaddr[0] = readb(macp + 3);
|
|
pdata->enetaddr[1] = readb(macp + 2);
|
|
pdata->enetaddr[2] = readb(macp + 1);
|
|
pdata->enetaddr[3] = readb(macp + 0);
|
|
pdata->enetaddr[4] = readb(macp + 7);
|
|
pdata->enetaddr[5] = readb(macp + 6);
|
|
return 0;
|
|
}
|
|
|
|
static int netsec_send(struct udevice *dev, void *packet, int length)
|
|
{
|
|
struct netsec_priv *priv = dev_get_priv(dev);
|
|
u32 val, tout;
|
|
|
|
val = netsec_read_reg(priv, NETSEC_REG_NRM_TX_STATUS);
|
|
netsec_cache_flush((uintptr_t)packet, length);
|
|
netsec_set_tx_de(priv, packet, length);
|
|
netsec_write_reg(priv, NETSEC_REG_NRM_TX_PKTCNT, 1); /* submit another tx */
|
|
|
|
val = netsec_read_reg(priv, NETSEC_REG_NRM_TX_PKTCNT);
|
|
|
|
tout = 10000;
|
|
do {
|
|
val = netsec_read_reg(priv, NETSEC_REG_NRM_TX_DONE_PKTCNT);
|
|
udelay(2);
|
|
} while (--tout && !val);
|
|
|
|
if (!tout) {
|
|
val = netsec_read_reg(priv, NETSEC_REG_NRM_TX_PKTCNT);
|
|
pr_err("%s: ETIMEDOUT: %dpackets\n", __func__, val);
|
|
return -ETIMEDOUT;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int netsec_free_packet(struct udevice *dev, uchar *packet, int length)
|
|
{
|
|
struct netsec_priv *priv = dev_get_priv(dev);
|
|
|
|
netsec_set_rx_de(priv, priv->rxat, net_rx_packets[priv->rxat]);
|
|
|
|
priv->rxat++;
|
|
if (priv->rxat == PKTBUFSRX)
|
|
priv->rxat = 0;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int netsec_recv(struct udevice *dev, int flags, uchar **packetp)
|
|
{
|
|
struct netsec_priv *priv = dev_get_priv(dev);
|
|
int idx = priv->rxat;
|
|
uchar *ptr = net_rx_packets[idx];
|
|
struct netsec_de *de = &priv->rxde[idx];
|
|
int length = 0;
|
|
|
|
netsec_cache_invalidate((uintptr_t)de, sizeof(*de));
|
|
|
|
if (de->attr & (1U << NETSEC_RX_PKT_OWN_FIELD))
|
|
return -EAGAIN;
|
|
|
|
length = de->buf_len_info >> 16;
|
|
|
|
/* invalidate after DMA is done */
|
|
netsec_cache_invalidate((uintptr_t)ptr, length);
|
|
*packetp = ptr;
|
|
|
|
return length;
|
|
}
|
|
|
|
static int _netsec_get_phy_reg(struct mii_dev *bus,
|
|
int phy_addr, int devad, int reg_addr)
|
|
{
|
|
return netsec_get_phy_reg(bus->priv, phy_addr, reg_addr);
|
|
}
|
|
|
|
static int _netsec_set_phy_reg(struct mii_dev *bus,
|
|
int phy_addr, int devad, int reg_addr, u16 val)
|
|
{
|
|
return netsec_set_phy_reg(bus->priv, phy_addr, reg_addr, val);
|
|
}
|
|
|
|
static int netsec_mdiobus_init(struct netsec_priv *priv, const char *name)
|
|
{
|
|
struct mii_dev *bus = mdio_alloc();
|
|
|
|
if (!bus)
|
|
return -ENOMEM;
|
|
|
|
bus->read = _netsec_get_phy_reg;
|
|
bus->write = _netsec_set_phy_reg;
|
|
snprintf(bus->name, sizeof(bus->name), "%s", name);
|
|
bus->priv = priv;
|
|
|
|
return mdio_register(bus);
|
|
}
|
|
|
|
static int netsec_phy_init(struct netsec_priv *priv, void *dev)
|
|
{
|
|
struct phy_device *phydev;
|
|
int ret;
|
|
|
|
phydev = phy_connect(priv->bus, priv->phy_addr, dev, priv->phy_mode);
|
|
|
|
phydev->supported &= PHY_GBIT_FEATURES;
|
|
if (priv->max_speed) {
|
|
ret = phy_set_supported(phydev, priv->max_speed);
|
|
if (ret)
|
|
return ret;
|
|
}
|
|
phydev->advertising = phydev->supported;
|
|
|
|
priv->phydev = phydev;
|
|
phy_config(phydev);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int netsec_netdev_load_ucode_region(struct netsec_priv *priv, u32 reg,
|
|
u32 addr_h, u32 addr_l, u32 size)
|
|
{
|
|
u64 base = ((u64)addr_h << 32 | addr_l) - EERPROM_MAP_OFFSET;
|
|
|
|
while (size > 0) {
|
|
char buf[NOR_BLOCK];
|
|
u32 *ucode = (u32 *)buf;
|
|
u64 off;
|
|
int i;
|
|
|
|
off = base % NOR_BLOCK;
|
|
base -= off;
|
|
netsec_spi_read(buf, sizeof(buf), base);
|
|
|
|
for (i = off / 4; i < sizeof(buf) / 4 && size > 0; i++, size--)
|
|
netsec_write_reg(priv, reg, ucode[i]);
|
|
base += NOR_BLOCK;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int netsec_netdev_load_microcode(struct netsec_priv *priv)
|
|
{
|
|
u32 addr_h, addr_l, size;
|
|
char buf[NOR_BLOCK];
|
|
u32 *ucinfo = (u32 *)buf;
|
|
int err;
|
|
|
|
netsec_spi_read(buf, sizeof(buf), priv->eeprom_base);
|
|
|
|
addr_h = ucinfo[NETSEC_EEPROM_HM_ME_ADDRESS_H >> 2];
|
|
addr_l = ucinfo[NETSEC_EEPROM_HM_ME_ADDRESS_L >> 2];
|
|
size = ucinfo[NETSEC_EEPROM_HM_ME_SIZE >> 2];
|
|
|
|
err = netsec_netdev_load_ucode_region(priv, NETSEC_REG_DMAC_HM_CMD_BUF,
|
|
addr_h, addr_l, size);
|
|
if (err)
|
|
return err;
|
|
|
|
addr_h = ucinfo[NETSEC_EEPROM_MH_ME_ADDRESS_H >> 2];
|
|
addr_l = ucinfo[NETSEC_EEPROM_MH_ME_ADDRESS_L >> 2];
|
|
size = ucinfo[NETSEC_EEPROM_MH_ME_SIZE >> 2];
|
|
|
|
err = netsec_netdev_load_ucode_region(priv, NETSEC_REG_DMAC_MH_CMD_BUF,
|
|
addr_h, addr_l, size);
|
|
if (err)
|
|
return err;
|
|
|
|
addr_h = 0;
|
|
addr_l = ucinfo[NETSEC_EEPROM_PKT_ME_ADDRESS >> 2];
|
|
size = ucinfo[NETSEC_EEPROM_PKT_ME_SIZE >> 2];
|
|
|
|
err = netsec_netdev_load_ucode_region(priv, NETSEC_REG_PKT_CMD_BUF,
|
|
addr_h, addr_l, size);
|
|
if (err)
|
|
return err;
|
|
|
|
return 0;
|
|
}
|
|
|
|
void netsec_pre_init_microengine(struct netsec_priv *priv)
|
|
{
|
|
u32 data;
|
|
|
|
/* Remove dormant settings */
|
|
data = netsec_get_phy_reg(priv, priv->phy_addr, MII_BMCR);
|
|
data &= ~BMCR_PDOWN;
|
|
data |= BMCR_ISOLATE;
|
|
netsec_set_phy_reg(priv, priv->phy_addr, MII_BMCR, data);
|
|
mdelay(100);
|
|
|
|
/* Put phy in loopback mode to guarantee RXCLK input */
|
|
data |= BMCR_LOOPBACK;
|
|
netsec_set_phy_reg(priv, priv->phy_addr, MII_BMCR, data);
|
|
mdelay(100);
|
|
}
|
|
|
|
void netsec_post_init_microengine(struct netsec_priv *priv)
|
|
{
|
|
u32 data;
|
|
|
|
/* Get phy back to normal operation */
|
|
data = netsec_get_phy_reg(priv, priv->phy_addr, MII_BMCR);
|
|
data &= ~BMCR_LOOPBACK;
|
|
netsec_set_phy_reg(priv, priv->phy_addr, MII_BMCR, data);
|
|
mdelay(100);
|
|
|
|
/* Apply software reset */
|
|
data |= BMCR_RESET;
|
|
netsec_set_phy_reg(priv, priv->phy_addr, MII_BMCR, data);
|
|
mdelay(100);
|
|
}
|
|
|
|
static int netsec_reset_hardware(struct netsec_priv *priv, bool load_ucode)
|
|
{
|
|
u32 value;
|
|
int err;
|
|
|
|
netsec_write_reg(priv, NETSEC_REG_CLK_EN, 0x24);
|
|
|
|
/* stop DMA engines */
|
|
if (!netsec_read_reg(priv, NETSEC_REG_ADDR_DIS_CORE)) {
|
|
netsec_write_reg(priv, NETSEC_REG_DMA_HM_CTRL,
|
|
NETSEC_DMA_CTRL_REG_STOP);
|
|
netsec_write_reg(priv, NETSEC_REG_DMA_MH_CTRL,
|
|
NETSEC_DMA_CTRL_REG_STOP);
|
|
|
|
value = 100;
|
|
while (netsec_read_reg(priv, NETSEC_REG_DMA_HM_CTRL) &
|
|
NETSEC_DMA_CTRL_REG_STOP) {
|
|
udelay(1000);
|
|
if (--value == 0) {
|
|
pr_err("%s:%d timeout!\n", __func__, __LINE__);
|
|
break;
|
|
}
|
|
}
|
|
|
|
value = 100;
|
|
while (netsec_read_reg(priv, NETSEC_REG_DMA_MH_CTRL) &
|
|
NETSEC_DMA_CTRL_REG_STOP) {
|
|
udelay(1000);
|
|
if (--value == 0) {
|
|
pr_err("%s:%d timeout!\n", __func__, __LINE__);
|
|
break;
|
|
}
|
|
}
|
|
}
|
|
|
|
netsec_set_mac_reg(priv, GMAC_REG_BMR, NETSEC_GMAC_BMR_REG_RESET);
|
|
|
|
netsec_write_reg(priv, NETSEC_REG_SOFT_RST, NETSEC_SOFT_RST_REG_RESET);
|
|
netsec_write_reg(priv, NETSEC_REG_SOFT_RST, NETSEC_SOFT_RST_REG_RUN);
|
|
netsec_write_reg(priv, NETSEC_REG_COM_INIT, NETSEC_COM_INIT_REG_ALL);
|
|
|
|
value = 100;
|
|
while (netsec_read_reg(priv, NETSEC_REG_COM_INIT) != 0) {
|
|
udelay(1000);
|
|
if (--value == 0) {
|
|
pr_err("%s:%d COM_INIT timeout!\n", __func__, __LINE__);
|
|
break;
|
|
}
|
|
}
|
|
|
|
/* MAC desc init */
|
|
netsec_write_reg(priv, MAC_REG_DESC_INIT, 1);
|
|
netsec_wait_while_busy(priv, MAC_REG_DESC_INIT, 1);
|
|
/* set MAC_INTF_SEL */
|
|
netsec_write_reg(priv, MAC_REG_INTF_SEL, 1);
|
|
|
|
netsec_write_reg(priv, NETSEC_REG_CLK_EN, 1 << 5);
|
|
|
|
/* set desc_start addr */
|
|
netsec_write_reg(priv, NETSEC_REG_NRM_RX_DESC_START_UP,
|
|
upper_32_bits((dma_addr_t)priv->rxde));
|
|
netsec_write_reg(priv, NETSEC_REG_NRM_RX_DESC_START_LW,
|
|
lower_32_bits((dma_addr_t)priv->rxde));
|
|
|
|
netsec_write_reg(priv, NETSEC_REG_NRM_TX_DESC_START_UP,
|
|
upper_32_bits((dma_addr_t)priv->txde));
|
|
netsec_write_reg(priv, NETSEC_REG_NRM_TX_DESC_START_LW,
|
|
lower_32_bits((dma_addr_t)priv->txde));
|
|
|
|
/* set normal tx dring ring config */
|
|
netsec_write_reg(priv, NETSEC_REG_NRM_TX_CONFIG,
|
|
1 << NETSEC_REG_DESC_ENDIAN);
|
|
netsec_write_reg(priv, NETSEC_REG_NRM_RX_CONFIG,
|
|
1 << NETSEC_REG_DESC_ENDIAN);
|
|
|
|
if (load_ucode) {
|
|
err = netsec_netdev_load_microcode(priv);
|
|
if (err) {
|
|
pr_err("%s: failed to load microcode (%d)\n",
|
|
__func__, err);
|
|
return err;
|
|
}
|
|
}
|
|
|
|
/* set desc_start addr */
|
|
netsec_write_reg(priv, NETSEC_REG_NRM_RX_DESC_START_UP,
|
|
upper_32_bits((dma_addr_t)priv->rxde));
|
|
netsec_write_reg(priv, NETSEC_REG_NRM_RX_DESC_START_LW,
|
|
lower_32_bits((dma_addr_t)priv->rxde));
|
|
|
|
netsec_write_reg(priv, NETSEC_REG_NRM_TX_DESC_START_UP,
|
|
upper_32_bits((dma_addr_t)priv->txde));
|
|
netsec_write_reg(priv, NETSEC_REG_NRM_TX_DESC_START_LW,
|
|
lower_32_bits((dma_addr_t)priv->txde));
|
|
|
|
netsec_write_reg(priv, NETSEC_REG_CLK_EN, 1 << 5);
|
|
|
|
/* start DMA engines */
|
|
netsec_write_reg(priv, NETSEC_REG_DMA_TMR_CTRL, priv->freq / 1000000 - 1);
|
|
|
|
netsec_pre_init_microengine(priv);
|
|
|
|
netsec_write_reg(priv, NETSEC_REG_ADDR_DIS_CORE, 0);
|
|
|
|
mdelay(100);
|
|
|
|
if (!(netsec_read_reg(priv, NETSEC_REG_TOP_STATUS) &
|
|
NETSEC_TOP_IRQ_REG_ME_START)) {
|
|
pr_err("microengine start failed\n");
|
|
return -ENXIO;
|
|
}
|
|
|
|
netsec_post_init_microengine(priv);
|
|
|
|
/* clear microcode load end status */
|
|
netsec_write_reg(priv, NETSEC_REG_TOP_STATUS,
|
|
NETSEC_TOP_IRQ_REG_ME_START);
|
|
|
|
netsec_write_reg(priv, NETSEC_REG_CLK_EN, 1 << 5);
|
|
|
|
value = netsec_read_reg(priv, NETSEC_REG_PKT_CTRL);
|
|
value |= NETSEC_PKT_CTRL_REG_MODE_NRM;
|
|
/* change to normal mode */
|
|
netsec_write_reg(priv, NETSEC_REG_DMA_MH_CTRL, MH_CTRL__MODE_TRANS);
|
|
netsec_write_reg(priv, NETSEC_REG_PKT_CTRL, value);
|
|
|
|
value = 100;
|
|
while ((netsec_read_reg(priv, NETSEC_REG_MODE_TRANS_COMP_STATUS) &
|
|
NETSEC_MODE_TRANS_COMP_IRQ_T2N) == 0) {
|
|
udelay(1000);
|
|
if (--value == 0) {
|
|
value = netsec_read_reg(priv, NETSEC_REG_MODE_TRANS_COMP_STATUS);
|
|
pr_err("%s:%d timeout! val=%x\n", __func__, __LINE__, value);
|
|
break;
|
|
}
|
|
}
|
|
|
|
/* clear any pending EMPTY/ERR irq status */
|
|
netsec_write_reg(priv, NETSEC_REG_NRM_TX_STATUS, ~0);
|
|
|
|
/* Disable TX & RX intr */
|
|
netsec_write_reg(priv, NETSEC_REG_INTEN_CLR, ~0);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static void netsec_stop(struct udevice *dev)
|
|
{
|
|
struct netsec_priv *priv = dev_get_priv(dev);
|
|
|
|
netsec_write_reg(priv, NETSEC_REG_ADDR_DIS_CORE, 7);
|
|
netsec_stop_gmac(priv);
|
|
phy_shutdown(priv->phydev);
|
|
netsec_reset_hardware(priv, false);
|
|
}
|
|
|
|
static int netsec_start(struct udevice *dev)
|
|
{
|
|
struct netsec_priv *priv = dev_get_priv(dev);
|
|
int i;
|
|
|
|
phy_startup(priv->phydev);
|
|
netsec_start_gmac(priv);
|
|
|
|
priv->rxat = 0;
|
|
for (i = 0; i < PKTBUFSRX; i++)
|
|
netsec_set_rx_de(priv, i, net_rx_packets[i]);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int netsec_of_to_plat(struct udevice *dev)
|
|
{
|
|
struct eth_pdata *pdata = dev_get_plat(dev);
|
|
struct netsec_priv *priv = dev_get_priv(dev);
|
|
struct ofnode_phandle_args phandle_args;
|
|
|
|
pdata->iobase = dev_read_addr_index(dev, 0);
|
|
priv->eeprom_base = dev_read_addr_index(dev, 1) - EERPROM_MAP_OFFSET;
|
|
|
|
pdata->phy_interface = dev_read_phy_mode(dev);
|
|
if (pdata->phy_interface == PHY_INTERFACE_MODE_NA)
|
|
return -EINVAL;
|
|
|
|
if (!dev_read_phandle_with_args(dev, "phy-handle", NULL, 0, 0,
|
|
&phandle_args))
|
|
priv->phy_addr = ofnode_read_u32_default(phandle_args.node, "reg", 7);
|
|
else
|
|
priv->phy_addr = 7;
|
|
|
|
pdata->max_speed = dev_read_u32_default(dev, "max-speed", SPEED_1000);
|
|
|
|
priv->ioaddr = pdata->iobase;
|
|
priv->phy_mode = pdata->phy_interface;
|
|
priv->max_speed = pdata->max_speed;
|
|
priv->freq = 250000000UL;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int netsec_probe(struct udevice *dev)
|
|
{
|
|
struct netsec_priv *priv = dev_get_priv(dev);
|
|
int ret;
|
|
|
|
netsec_reset_hardware(priv, true);
|
|
|
|
ret = netsec_mdiobus_init(priv, dev->name);
|
|
if (ret) {
|
|
pr_err("Failed to initialize mdiobus: %d\n", ret);
|
|
return ret;
|
|
}
|
|
|
|
priv->bus = miiphy_get_dev_by_name(dev->name);
|
|
|
|
ret = netsec_phy_init(priv, dev);
|
|
if (ret) {
|
|
pr_err("Failed to initialize phy: %d\n", ret);
|
|
goto out_mdiobus_release;
|
|
}
|
|
|
|
return 0;
|
|
out_mdiobus_release:
|
|
mdio_unregister(priv->bus);
|
|
mdio_free(priv->bus);
|
|
return ret;
|
|
}
|
|
|
|
static int netsec_remove(struct udevice *dev)
|
|
{
|
|
struct netsec_priv *priv = dev_get_priv(dev);
|
|
|
|
free(priv->phydev);
|
|
mdio_unregister(priv->bus);
|
|
mdio_free(priv->bus);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static const struct eth_ops netsec_ops = {
|
|
.start = netsec_start,
|
|
.stop = netsec_stop,
|
|
.send = netsec_send,
|
|
.recv = netsec_recv,
|
|
.free_pkt = netsec_free_packet,
|
|
.read_rom_hwaddr = netsec_read_rom_hwaddr,
|
|
};
|
|
|
|
static const struct udevice_id netsec_ids[] = {
|
|
{
|
|
.compatible = "socionext,synquacer-netsec",
|
|
},
|
|
{}
|
|
};
|
|
|
|
U_BOOT_DRIVER(ave) = {
|
|
.name = "synquacer_netsec",
|
|
.id = UCLASS_ETH,
|
|
.of_match = netsec_ids,
|
|
.probe = netsec_probe,
|
|
.remove = netsec_remove,
|
|
.of_to_plat = netsec_of_to_plat,
|
|
.ops = &netsec_ops,
|
|
.priv_auto = sizeof(struct netsec_priv),
|
|
.plat_auto = sizeof(struct eth_pdata),
|
|
};
|