mirror of
https://github.com/AsahiLinux/u-boot
synced 2024-11-24 21:54:01 +00:00
6e33eba59f
Since 291da96b8e
("clk: Allow clock defaults to be set during re-reloc
state for SPL only") it has been impossible to set clock defaults before
relocation. This is annoying on boards without SPL, since there is no way
to set clock defaults before U-Boot proper. In particular, the aisram rate
must be changed before relocation on the K210, since U-Boot will hang if we
try and change the rate while we are using aisram.
To get around this, extend the stage parameter to allow force setting
defaults, even if they would be otherwise postponed for later. A device
tree property was decided against because of the concerns in the original
commit thread about the overhead of repeatedly parsing the device tree.
Signed-off-by: Sean Anderson <seanga2@gmail.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
766 lines
19 KiB
C
766 lines
19 KiB
C
// SPDX-License-Identifier: GPL-2.0+
|
|
/*
|
|
* (C) Copyright 2015 Sjoerd Simons <sjoerd.simons@collabora.co.uk>
|
|
*
|
|
* Rockchip GMAC ethernet IP driver for U-Boot
|
|
*/
|
|
|
|
#include <common.h>
|
|
#include <dm.h>
|
|
#include <clk.h>
|
|
#include <log.h>
|
|
#include <net.h>
|
|
#include <phy.h>
|
|
#include <syscon.h>
|
|
#include <asm/global_data.h>
|
|
#include <asm/io.h>
|
|
#include <asm/arch-rockchip/periph.h>
|
|
#include <asm/arch-rockchip/clock.h>
|
|
#include <asm/arch-rockchip/hardware.h>
|
|
#include <asm/arch-rockchip/grf_px30.h>
|
|
#include <asm/arch-rockchip/grf_rk322x.h>
|
|
#include <asm/arch-rockchip/grf_rk3288.h>
|
|
#include <asm/arch-rk3308/grf_rk3308.h>
|
|
#include <asm/arch-rockchip/grf_rk3328.h>
|
|
#include <asm/arch-rockchip/grf_rk3368.h>
|
|
#include <asm/arch-rockchip/grf_rk3399.h>
|
|
#include <asm/arch-rockchip/grf_rv1108.h>
|
|
#include <dm/pinctrl.h>
|
|
#include <dt-bindings/clock/rk3288-cru.h>
|
|
#include <linux/bitops.h>
|
|
#include "designware.h"
|
|
|
|
DECLARE_GLOBAL_DATA_PTR;
|
|
#define DELAY_ENABLE(soc, tx, rx) \
|
|
(((tx) ? soc##_TXCLK_DLY_ENA_GMAC_ENABLE : soc##_TXCLK_DLY_ENA_GMAC_DISABLE) | \
|
|
((rx) ? soc##_RXCLK_DLY_ENA_GMAC_ENABLE : soc##_RXCLK_DLY_ENA_GMAC_DISABLE))
|
|
|
|
/*
|
|
* Platform data for the gmac
|
|
*
|
|
* dw_eth_pdata: Required platform data for designware driver (must be first)
|
|
*/
|
|
struct gmac_rockchip_plat {
|
|
struct dw_eth_pdata dw_eth_pdata;
|
|
bool clock_input;
|
|
int tx_delay;
|
|
int rx_delay;
|
|
};
|
|
|
|
struct rk_gmac_ops {
|
|
int (*fix_mac_speed)(struct dw_eth_dev *priv);
|
|
void (*set_to_rmii)(struct gmac_rockchip_plat *pdata);
|
|
void (*set_to_rgmii)(struct gmac_rockchip_plat *pdata);
|
|
};
|
|
|
|
|
|
static int gmac_rockchip_of_to_plat(struct udevice *dev)
|
|
{
|
|
struct gmac_rockchip_plat *pdata = dev_get_plat(dev);
|
|
const char *string;
|
|
|
|
string = dev_read_string(dev, "clock_in_out");
|
|
if (!strcmp(string, "input"))
|
|
pdata->clock_input = true;
|
|
else
|
|
pdata->clock_input = false;
|
|
|
|
/* Check the new naming-style first... */
|
|
pdata->tx_delay = dev_read_u32_default(dev, "tx_delay", -ENOENT);
|
|
pdata->rx_delay = dev_read_u32_default(dev, "rx_delay", -ENOENT);
|
|
|
|
/* ... and fall back to the old naming style or default, if necessary */
|
|
if (pdata->tx_delay == -ENOENT)
|
|
pdata->tx_delay = dev_read_u32_default(dev, "tx-delay", 0x30);
|
|
if (pdata->rx_delay == -ENOENT)
|
|
pdata->rx_delay = dev_read_u32_default(dev, "rx-delay", 0x10);
|
|
|
|
return designware_eth_of_to_plat(dev);
|
|
}
|
|
|
|
static int px30_gmac_fix_mac_speed(struct dw_eth_dev *priv)
|
|
{
|
|
struct px30_grf *grf;
|
|
struct clk clk_speed;
|
|
int speed, ret;
|
|
enum {
|
|
PX30_GMAC_SPEED_SHIFT = 0x2,
|
|
PX30_GMAC_SPEED_MASK = BIT(2),
|
|
PX30_GMAC_SPEED_10M = 0,
|
|
PX30_GMAC_SPEED_100M = BIT(2),
|
|
};
|
|
|
|
ret = clk_get_by_name(priv->phydev->dev, "clk_mac_speed",
|
|
&clk_speed);
|
|
if (ret)
|
|
return ret;
|
|
|
|
switch (priv->phydev->speed) {
|
|
case 10:
|
|
speed = PX30_GMAC_SPEED_10M;
|
|
ret = clk_set_rate(&clk_speed, 2500000);
|
|
if (ret)
|
|
return ret;
|
|
break;
|
|
case 100:
|
|
speed = PX30_GMAC_SPEED_100M;
|
|
ret = clk_set_rate(&clk_speed, 25000000);
|
|
if (ret)
|
|
return ret;
|
|
break;
|
|
default:
|
|
debug("Unknown phy speed: %d\n", priv->phydev->speed);
|
|
return -EINVAL;
|
|
}
|
|
|
|
grf = syscon_get_first_range(ROCKCHIP_SYSCON_GRF);
|
|
rk_clrsetreg(&grf->mac_con1, PX30_GMAC_SPEED_MASK, speed);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int rk3228_gmac_fix_mac_speed(struct dw_eth_dev *priv)
|
|
{
|
|
struct rk322x_grf *grf;
|
|
int clk;
|
|
enum {
|
|
RK3228_GMAC_CLK_SEL_SHIFT = 8,
|
|
RK3228_GMAC_CLK_SEL_MASK = GENMASK(9, 8),
|
|
RK3228_GMAC_CLK_SEL_125M = 0 << 8,
|
|
RK3228_GMAC_CLK_SEL_25M = 3 << 8,
|
|
RK3228_GMAC_CLK_SEL_2_5M = 2 << 8,
|
|
};
|
|
|
|
switch (priv->phydev->speed) {
|
|
case 10:
|
|
clk = RK3228_GMAC_CLK_SEL_2_5M;
|
|
break;
|
|
case 100:
|
|
clk = RK3228_GMAC_CLK_SEL_25M;
|
|
break;
|
|
case 1000:
|
|
clk = RK3228_GMAC_CLK_SEL_125M;
|
|
break;
|
|
default:
|
|
debug("Unknown phy speed: %d\n", priv->phydev->speed);
|
|
return -EINVAL;
|
|
}
|
|
|
|
grf = syscon_get_first_range(ROCKCHIP_SYSCON_GRF);
|
|
rk_clrsetreg(&grf->mac_con[1], RK3228_GMAC_CLK_SEL_MASK, clk);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int rk3288_gmac_fix_mac_speed(struct dw_eth_dev *priv)
|
|
{
|
|
struct rk3288_grf *grf;
|
|
int clk;
|
|
|
|
switch (priv->phydev->speed) {
|
|
case 10:
|
|
clk = RK3288_GMAC_CLK_SEL_2_5M;
|
|
break;
|
|
case 100:
|
|
clk = RK3288_GMAC_CLK_SEL_25M;
|
|
break;
|
|
case 1000:
|
|
clk = RK3288_GMAC_CLK_SEL_125M;
|
|
break;
|
|
default:
|
|
debug("Unknown phy speed: %d\n", priv->phydev->speed);
|
|
return -EINVAL;
|
|
}
|
|
|
|
grf = syscon_get_first_range(ROCKCHIP_SYSCON_GRF);
|
|
rk_clrsetreg(&grf->soc_con1, RK3288_GMAC_CLK_SEL_MASK, clk);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int rk3308_gmac_fix_mac_speed(struct dw_eth_dev *priv)
|
|
{
|
|
struct rk3308_grf *grf;
|
|
struct clk clk_speed;
|
|
int speed, ret;
|
|
enum {
|
|
RK3308_GMAC_SPEED_SHIFT = 0x0,
|
|
RK3308_GMAC_SPEED_MASK = BIT(0),
|
|
RK3308_GMAC_SPEED_10M = 0,
|
|
RK3308_GMAC_SPEED_100M = BIT(0),
|
|
};
|
|
|
|
ret = clk_get_by_name(priv->phydev->dev, "clk_mac_speed",
|
|
&clk_speed);
|
|
if (ret)
|
|
return ret;
|
|
|
|
switch (priv->phydev->speed) {
|
|
case 10:
|
|
speed = RK3308_GMAC_SPEED_10M;
|
|
ret = clk_set_rate(&clk_speed, 2500000);
|
|
if (ret)
|
|
return ret;
|
|
break;
|
|
case 100:
|
|
speed = RK3308_GMAC_SPEED_100M;
|
|
ret = clk_set_rate(&clk_speed, 25000000);
|
|
if (ret)
|
|
return ret;
|
|
break;
|
|
default:
|
|
debug("Unknown phy speed: %d\n", priv->phydev->speed);
|
|
return -EINVAL;
|
|
}
|
|
|
|
grf = syscon_get_first_range(ROCKCHIP_SYSCON_GRF);
|
|
rk_clrsetreg(&grf->mac_con0, RK3308_GMAC_SPEED_MASK, speed);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int rk3328_gmac_fix_mac_speed(struct dw_eth_dev *priv)
|
|
{
|
|
struct rk3328_grf_regs *grf;
|
|
int clk;
|
|
enum {
|
|
RK3328_GMAC_CLK_SEL_SHIFT = 11,
|
|
RK3328_GMAC_CLK_SEL_MASK = GENMASK(12, 11),
|
|
RK3328_GMAC_CLK_SEL_125M = 0 << 11,
|
|
RK3328_GMAC_CLK_SEL_25M = 3 << 11,
|
|
RK3328_GMAC_CLK_SEL_2_5M = 2 << 11,
|
|
};
|
|
|
|
switch (priv->phydev->speed) {
|
|
case 10:
|
|
clk = RK3328_GMAC_CLK_SEL_2_5M;
|
|
break;
|
|
case 100:
|
|
clk = RK3328_GMAC_CLK_SEL_25M;
|
|
break;
|
|
case 1000:
|
|
clk = RK3328_GMAC_CLK_SEL_125M;
|
|
break;
|
|
default:
|
|
debug("Unknown phy speed: %d\n", priv->phydev->speed);
|
|
return -EINVAL;
|
|
}
|
|
|
|
grf = syscon_get_first_range(ROCKCHIP_SYSCON_GRF);
|
|
rk_clrsetreg(&grf->mac_con[1], RK3328_GMAC_CLK_SEL_MASK, clk);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int rk3368_gmac_fix_mac_speed(struct dw_eth_dev *priv)
|
|
{
|
|
struct rk3368_grf *grf;
|
|
int clk;
|
|
enum {
|
|
RK3368_GMAC_CLK_SEL_2_5M = 2 << 4,
|
|
RK3368_GMAC_CLK_SEL_25M = 3 << 4,
|
|
RK3368_GMAC_CLK_SEL_125M = 0 << 4,
|
|
RK3368_GMAC_CLK_SEL_MASK = GENMASK(5, 4),
|
|
};
|
|
|
|
switch (priv->phydev->speed) {
|
|
case 10:
|
|
clk = RK3368_GMAC_CLK_SEL_2_5M;
|
|
break;
|
|
case 100:
|
|
clk = RK3368_GMAC_CLK_SEL_25M;
|
|
break;
|
|
case 1000:
|
|
clk = RK3368_GMAC_CLK_SEL_125M;
|
|
break;
|
|
default:
|
|
debug("Unknown phy speed: %d\n", priv->phydev->speed);
|
|
return -EINVAL;
|
|
}
|
|
|
|
grf = syscon_get_first_range(ROCKCHIP_SYSCON_GRF);
|
|
rk_clrsetreg(&grf->soc_con15, RK3368_GMAC_CLK_SEL_MASK, clk);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int rk3399_gmac_fix_mac_speed(struct dw_eth_dev *priv)
|
|
{
|
|
struct rk3399_grf_regs *grf;
|
|
int clk;
|
|
|
|
switch (priv->phydev->speed) {
|
|
case 10:
|
|
clk = RK3399_GMAC_CLK_SEL_2_5M;
|
|
break;
|
|
case 100:
|
|
clk = RK3399_GMAC_CLK_SEL_25M;
|
|
break;
|
|
case 1000:
|
|
clk = RK3399_GMAC_CLK_SEL_125M;
|
|
break;
|
|
default:
|
|
debug("Unknown phy speed: %d\n", priv->phydev->speed);
|
|
return -EINVAL;
|
|
}
|
|
|
|
grf = syscon_get_first_range(ROCKCHIP_SYSCON_GRF);
|
|
rk_clrsetreg(&grf->soc_con5, RK3399_GMAC_CLK_SEL_MASK, clk);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int rv1108_set_rmii_speed(struct dw_eth_dev *priv)
|
|
{
|
|
struct rv1108_grf *grf;
|
|
int clk, speed;
|
|
enum {
|
|
RV1108_GMAC_SPEED_MASK = BIT(2),
|
|
RV1108_GMAC_SPEED_10M = 0 << 2,
|
|
RV1108_GMAC_SPEED_100M = 1 << 2,
|
|
RV1108_GMAC_CLK_SEL_MASK = BIT(7),
|
|
RV1108_GMAC_CLK_SEL_2_5M = 0 << 7,
|
|
RV1108_GMAC_CLK_SEL_25M = 1 << 7,
|
|
};
|
|
|
|
switch (priv->phydev->speed) {
|
|
case 10:
|
|
clk = RV1108_GMAC_CLK_SEL_2_5M;
|
|
speed = RV1108_GMAC_SPEED_10M;
|
|
break;
|
|
case 100:
|
|
clk = RV1108_GMAC_CLK_SEL_25M;
|
|
speed = RV1108_GMAC_SPEED_100M;
|
|
break;
|
|
default:
|
|
debug("Unknown phy speed: %d\n", priv->phydev->speed);
|
|
return -EINVAL;
|
|
}
|
|
|
|
grf = syscon_get_first_range(ROCKCHIP_SYSCON_GRF);
|
|
rk_clrsetreg(&grf->gmac_con0,
|
|
RV1108_GMAC_CLK_SEL_MASK | RV1108_GMAC_SPEED_MASK,
|
|
clk | speed);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static void px30_gmac_set_to_rmii(struct gmac_rockchip_plat *pdata)
|
|
{
|
|
struct px30_grf *grf;
|
|
enum {
|
|
PX30_GMAC_PHY_INTF_SEL_SHIFT = 4,
|
|
PX30_GMAC_PHY_INTF_SEL_MASK = GENMASK(4, 6),
|
|
PX30_GMAC_PHY_INTF_SEL_RMII = BIT(6),
|
|
};
|
|
|
|
grf = syscon_get_first_range(ROCKCHIP_SYSCON_GRF);
|
|
|
|
rk_clrsetreg(&grf->mac_con1,
|
|
PX30_GMAC_PHY_INTF_SEL_MASK,
|
|
PX30_GMAC_PHY_INTF_SEL_RMII);
|
|
}
|
|
|
|
static void rk3228_gmac_set_to_rgmii(struct gmac_rockchip_plat *pdata)
|
|
{
|
|
struct rk322x_grf *grf;
|
|
enum {
|
|
RK3228_RMII_MODE_SHIFT = 10,
|
|
RK3228_RMII_MODE_MASK = BIT(10),
|
|
|
|
RK3228_GMAC_PHY_INTF_SEL_SHIFT = 4,
|
|
RK3228_GMAC_PHY_INTF_SEL_MASK = GENMASK(6, 4),
|
|
RK3228_GMAC_PHY_INTF_SEL_RGMII = BIT(4),
|
|
|
|
RK3228_RXCLK_DLY_ENA_GMAC_MASK = BIT(1),
|
|
RK3228_RXCLK_DLY_ENA_GMAC_DISABLE = 0,
|
|
RK3228_RXCLK_DLY_ENA_GMAC_ENABLE = BIT(1),
|
|
|
|
RK3228_TXCLK_DLY_ENA_GMAC_MASK = BIT(0),
|
|
RK3228_TXCLK_DLY_ENA_GMAC_DISABLE = 0,
|
|
RK3228_TXCLK_DLY_ENA_GMAC_ENABLE = BIT(0),
|
|
};
|
|
enum {
|
|
RK3228_CLK_RX_DL_CFG_GMAC_SHIFT = 0x7,
|
|
RK3228_CLK_RX_DL_CFG_GMAC_MASK = GENMASK(13, 7),
|
|
|
|
RK3228_CLK_TX_DL_CFG_GMAC_SHIFT = 0x0,
|
|
RK3228_CLK_TX_DL_CFG_GMAC_MASK = GENMASK(6, 0),
|
|
};
|
|
|
|
grf = syscon_get_first_range(ROCKCHIP_SYSCON_GRF);
|
|
rk_clrsetreg(&grf->mac_con[1],
|
|
RK3228_RMII_MODE_MASK |
|
|
RK3228_GMAC_PHY_INTF_SEL_MASK |
|
|
RK3228_RXCLK_DLY_ENA_GMAC_MASK |
|
|
RK3228_TXCLK_DLY_ENA_GMAC_MASK,
|
|
RK3228_GMAC_PHY_INTF_SEL_RGMII |
|
|
DELAY_ENABLE(RK3228, pdata->tx_delay, pdata->rx_delay));
|
|
|
|
rk_clrsetreg(&grf->mac_con[0],
|
|
RK3228_CLK_RX_DL_CFG_GMAC_MASK |
|
|
RK3228_CLK_TX_DL_CFG_GMAC_MASK,
|
|
pdata->rx_delay << RK3228_CLK_RX_DL_CFG_GMAC_SHIFT |
|
|
pdata->tx_delay << RK3228_CLK_TX_DL_CFG_GMAC_SHIFT);
|
|
}
|
|
|
|
static void rk3288_gmac_set_to_rgmii(struct gmac_rockchip_plat *pdata)
|
|
{
|
|
struct rk3288_grf *grf;
|
|
|
|
grf = syscon_get_first_range(ROCKCHIP_SYSCON_GRF);
|
|
rk_clrsetreg(&grf->soc_con1,
|
|
RK3288_RMII_MODE_MASK | RK3288_GMAC_PHY_INTF_SEL_MASK,
|
|
RK3288_GMAC_PHY_INTF_SEL_RGMII);
|
|
|
|
rk_clrsetreg(&grf->soc_con3,
|
|
RK3288_RXCLK_DLY_ENA_GMAC_MASK |
|
|
RK3288_TXCLK_DLY_ENA_GMAC_MASK |
|
|
RK3288_CLK_RX_DL_CFG_GMAC_MASK |
|
|
RK3288_CLK_TX_DL_CFG_GMAC_MASK,
|
|
DELAY_ENABLE(RK3288, pdata->rx_delay, pdata->tx_delay) |
|
|
pdata->rx_delay << RK3288_CLK_RX_DL_CFG_GMAC_SHIFT |
|
|
pdata->tx_delay << RK3288_CLK_TX_DL_CFG_GMAC_SHIFT);
|
|
}
|
|
|
|
static void rk3308_gmac_set_to_rmii(struct gmac_rockchip_plat *pdata)
|
|
{
|
|
struct rk3308_grf *grf;
|
|
enum {
|
|
RK3308_GMAC_PHY_INTF_SEL_SHIFT = 2,
|
|
RK3308_GMAC_PHY_INTF_SEL_MASK = GENMASK(4, 2),
|
|
RK3308_GMAC_PHY_INTF_SEL_RMII = BIT(4),
|
|
};
|
|
|
|
grf = syscon_get_first_range(ROCKCHIP_SYSCON_GRF);
|
|
|
|
rk_clrsetreg(&grf->mac_con0,
|
|
RK3308_GMAC_PHY_INTF_SEL_MASK,
|
|
RK3308_GMAC_PHY_INTF_SEL_RMII);
|
|
}
|
|
|
|
static void rk3328_gmac_set_to_rgmii(struct gmac_rockchip_plat *pdata)
|
|
{
|
|
struct rk3328_grf_regs *grf;
|
|
enum {
|
|
RK3328_RMII_MODE_SHIFT = 9,
|
|
RK3328_RMII_MODE_MASK = BIT(9),
|
|
|
|
RK3328_GMAC_PHY_INTF_SEL_SHIFT = 4,
|
|
RK3328_GMAC_PHY_INTF_SEL_MASK = GENMASK(6, 4),
|
|
RK3328_GMAC_PHY_INTF_SEL_RGMII = BIT(4),
|
|
|
|
RK3328_RXCLK_DLY_ENA_GMAC_MASK = BIT(1),
|
|
RK3328_RXCLK_DLY_ENA_GMAC_DISABLE = 0,
|
|
RK3328_RXCLK_DLY_ENA_GMAC_ENABLE = BIT(1),
|
|
|
|
RK3328_TXCLK_DLY_ENA_GMAC_MASK = BIT(0),
|
|
RK3328_TXCLK_DLY_ENA_GMAC_DISABLE = 0,
|
|
RK3328_TXCLK_DLY_ENA_GMAC_ENABLE = BIT(0),
|
|
};
|
|
enum {
|
|
RK3328_CLK_RX_DL_CFG_GMAC_SHIFT = 0x7,
|
|
RK3328_CLK_RX_DL_CFG_GMAC_MASK = GENMASK(13, 7),
|
|
|
|
RK3328_CLK_TX_DL_CFG_GMAC_SHIFT = 0x0,
|
|
RK3328_CLK_TX_DL_CFG_GMAC_MASK = GENMASK(6, 0),
|
|
};
|
|
|
|
grf = syscon_get_first_range(ROCKCHIP_SYSCON_GRF);
|
|
rk_clrsetreg(&grf->mac_con[1],
|
|
RK3328_RMII_MODE_MASK |
|
|
RK3328_GMAC_PHY_INTF_SEL_MASK |
|
|
RK3328_RXCLK_DLY_ENA_GMAC_MASK |
|
|
RK3328_TXCLK_DLY_ENA_GMAC_MASK,
|
|
RK3328_GMAC_PHY_INTF_SEL_RGMII |
|
|
DELAY_ENABLE(RK3328, pdata->tx_delay, pdata->rx_delay));
|
|
|
|
rk_clrsetreg(&grf->mac_con[0],
|
|
RK3328_CLK_RX_DL_CFG_GMAC_MASK |
|
|
RK3328_CLK_TX_DL_CFG_GMAC_MASK,
|
|
pdata->rx_delay << RK3328_CLK_RX_DL_CFG_GMAC_SHIFT |
|
|
pdata->tx_delay << RK3328_CLK_TX_DL_CFG_GMAC_SHIFT);
|
|
}
|
|
|
|
static void rk3368_gmac_set_to_rgmii(struct gmac_rockchip_plat *pdata)
|
|
{
|
|
struct rk3368_grf *grf;
|
|
enum {
|
|
RK3368_GMAC_PHY_INTF_SEL_RGMII = 1 << 9,
|
|
RK3368_GMAC_PHY_INTF_SEL_MASK = GENMASK(11, 9),
|
|
RK3368_RMII_MODE_MASK = BIT(6),
|
|
RK3368_RMII_MODE = BIT(6),
|
|
};
|
|
enum {
|
|
RK3368_RXCLK_DLY_ENA_GMAC_MASK = BIT(15),
|
|
RK3368_RXCLK_DLY_ENA_GMAC_DISABLE = 0,
|
|
RK3368_RXCLK_DLY_ENA_GMAC_ENABLE = BIT(15),
|
|
RK3368_TXCLK_DLY_ENA_GMAC_MASK = BIT(7),
|
|
RK3368_TXCLK_DLY_ENA_GMAC_DISABLE = 0,
|
|
RK3368_TXCLK_DLY_ENA_GMAC_ENABLE = BIT(7),
|
|
RK3368_CLK_RX_DL_CFG_GMAC_SHIFT = 8,
|
|
RK3368_CLK_RX_DL_CFG_GMAC_MASK = GENMASK(14, 8),
|
|
RK3368_CLK_TX_DL_CFG_GMAC_SHIFT = 0,
|
|
RK3368_CLK_TX_DL_CFG_GMAC_MASK = GENMASK(6, 0),
|
|
};
|
|
|
|
grf = syscon_get_first_range(ROCKCHIP_SYSCON_GRF);
|
|
rk_clrsetreg(&grf->soc_con15,
|
|
RK3368_RMII_MODE_MASK | RK3368_GMAC_PHY_INTF_SEL_MASK,
|
|
RK3368_GMAC_PHY_INTF_SEL_RGMII);
|
|
|
|
rk_clrsetreg(&grf->soc_con16,
|
|
RK3368_RXCLK_DLY_ENA_GMAC_MASK |
|
|
RK3368_TXCLK_DLY_ENA_GMAC_MASK |
|
|
RK3368_CLK_RX_DL_CFG_GMAC_MASK |
|
|
RK3368_CLK_TX_DL_CFG_GMAC_MASK,
|
|
DELAY_ENABLE(RK3368, pdata->tx_delay, pdata->rx_delay) |
|
|
pdata->rx_delay << RK3368_CLK_RX_DL_CFG_GMAC_SHIFT |
|
|
pdata->tx_delay << RK3368_CLK_TX_DL_CFG_GMAC_SHIFT);
|
|
}
|
|
|
|
static void rk3399_gmac_set_to_rgmii(struct gmac_rockchip_plat *pdata)
|
|
{
|
|
struct rk3399_grf_regs *grf;
|
|
|
|
grf = syscon_get_first_range(ROCKCHIP_SYSCON_GRF);
|
|
|
|
rk_clrsetreg(&grf->soc_con5,
|
|
RK3399_GMAC_PHY_INTF_SEL_MASK,
|
|
RK3399_GMAC_PHY_INTF_SEL_RGMII);
|
|
|
|
rk_clrsetreg(&grf->soc_con6,
|
|
RK3399_RXCLK_DLY_ENA_GMAC_MASK |
|
|
RK3399_TXCLK_DLY_ENA_GMAC_MASK |
|
|
RK3399_CLK_RX_DL_CFG_GMAC_MASK |
|
|
RK3399_CLK_TX_DL_CFG_GMAC_MASK,
|
|
DELAY_ENABLE(RK3399, pdata->tx_delay, pdata->rx_delay) |
|
|
pdata->rx_delay << RK3399_CLK_RX_DL_CFG_GMAC_SHIFT |
|
|
pdata->tx_delay << RK3399_CLK_TX_DL_CFG_GMAC_SHIFT);
|
|
}
|
|
|
|
static void rv1108_gmac_set_to_rmii(struct gmac_rockchip_plat *pdata)
|
|
{
|
|
struct rv1108_grf *grf;
|
|
|
|
enum {
|
|
RV1108_GMAC_PHY_INTF_SEL_MASK = GENMASK(6, 4),
|
|
RV1108_GMAC_PHY_INTF_SEL_RMII = 4 << 4,
|
|
};
|
|
|
|
grf = syscon_get_first_range(ROCKCHIP_SYSCON_GRF);
|
|
rk_clrsetreg(&grf->gmac_con0,
|
|
RV1108_GMAC_PHY_INTF_SEL_MASK,
|
|
RV1108_GMAC_PHY_INTF_SEL_RMII);
|
|
}
|
|
|
|
static int gmac_rockchip_probe(struct udevice *dev)
|
|
{
|
|
struct gmac_rockchip_plat *pdata = dev_get_plat(dev);
|
|
struct rk_gmac_ops *ops =
|
|
(struct rk_gmac_ops *)dev_get_driver_data(dev);
|
|
struct dw_eth_pdata *dw_pdata = dev_get_plat(dev);
|
|
struct eth_pdata *eth_pdata = &dw_pdata->eth_pdata;
|
|
struct clk clk;
|
|
ulong rate;
|
|
int ret;
|
|
|
|
ret = clk_set_defaults(dev, CLK_DEFAULTS_PRE);
|
|
if (ret)
|
|
debug("%s clk_set_defaults failed %d\n", __func__, ret);
|
|
|
|
ret = clk_get_by_index(dev, 0, &clk);
|
|
if (ret)
|
|
return ret;
|
|
|
|
switch (eth_pdata->phy_interface) {
|
|
case PHY_INTERFACE_MODE_RGMII:
|
|
/* Set to RGMII mode */
|
|
if (ops->set_to_rgmii)
|
|
ops->set_to_rgmii(pdata);
|
|
else
|
|
return -EPERM;
|
|
|
|
/*
|
|
* If the gmac clock is from internal pll, need to set and
|
|
* check the return value for gmac clock at RGMII mode. If
|
|
* the gmac clock is from external source, the clock rate
|
|
* is not set, because of it is bypassed.
|
|
*/
|
|
|
|
if (!pdata->clock_input) {
|
|
rate = clk_set_rate(&clk, 125000000);
|
|
if (rate != 125000000)
|
|
return -EINVAL;
|
|
}
|
|
break;
|
|
|
|
case PHY_INTERFACE_MODE_RGMII_ID:
|
|
/* Set to RGMII mode */
|
|
if (ops->set_to_rgmii) {
|
|
pdata->tx_delay = 0;
|
|
pdata->rx_delay = 0;
|
|
ops->set_to_rgmii(pdata);
|
|
} else
|
|
return -EPERM;
|
|
|
|
if (!pdata->clock_input) {
|
|
rate = clk_set_rate(&clk, 125000000);
|
|
if (rate != 125000000)
|
|
return -EINVAL;
|
|
}
|
|
break;
|
|
|
|
case PHY_INTERFACE_MODE_RMII:
|
|
/* Set to RMII mode */
|
|
if (ops->set_to_rmii)
|
|
ops->set_to_rmii(pdata);
|
|
else
|
|
return -EPERM;
|
|
|
|
if (!pdata->clock_input) {
|
|
rate = clk_set_rate(&clk, 50000000);
|
|
if (rate != 50000000)
|
|
return -EINVAL;
|
|
}
|
|
break;
|
|
|
|
case PHY_INTERFACE_MODE_RGMII_RXID:
|
|
/* Set to RGMII_RXID mode */
|
|
if (ops->set_to_rgmii) {
|
|
pdata->tx_delay = 0;
|
|
ops->set_to_rgmii(pdata);
|
|
} else
|
|
return -EPERM;
|
|
|
|
if (!pdata->clock_input) {
|
|
rate = clk_set_rate(&clk, 125000000);
|
|
if (rate != 125000000)
|
|
return -EINVAL;
|
|
}
|
|
break;
|
|
|
|
case PHY_INTERFACE_MODE_RGMII_TXID:
|
|
/* Set to RGMII_TXID mode */
|
|
if (ops->set_to_rgmii) {
|
|
pdata->rx_delay = 0;
|
|
ops->set_to_rgmii(pdata);
|
|
} else
|
|
return -EPERM;
|
|
|
|
if (!pdata->clock_input) {
|
|
rate = clk_set_rate(&clk, 125000000);
|
|
if (rate != 125000000)
|
|
return -EINVAL;
|
|
}
|
|
break;
|
|
|
|
default:
|
|
debug("NO interface defined!\n");
|
|
return -ENXIO;
|
|
}
|
|
|
|
return designware_eth_probe(dev);
|
|
}
|
|
|
|
static int gmac_rockchip_eth_start(struct udevice *dev)
|
|
{
|
|
struct eth_pdata *pdata = dev_get_plat(dev);
|
|
struct dw_eth_dev *priv = dev_get_priv(dev);
|
|
struct rk_gmac_ops *ops =
|
|
(struct rk_gmac_ops *)dev_get_driver_data(dev);
|
|
int ret;
|
|
|
|
ret = designware_eth_init(priv, pdata->enetaddr);
|
|
if (ret)
|
|
return ret;
|
|
ret = ops->fix_mac_speed(priv);
|
|
if (ret)
|
|
return ret;
|
|
ret = designware_eth_enable(priv);
|
|
if (ret)
|
|
return ret;
|
|
|
|
return 0;
|
|
}
|
|
|
|
const struct eth_ops gmac_rockchip_eth_ops = {
|
|
.start = gmac_rockchip_eth_start,
|
|
.send = designware_eth_send,
|
|
.recv = designware_eth_recv,
|
|
.free_pkt = designware_eth_free_pkt,
|
|
.stop = designware_eth_stop,
|
|
.write_hwaddr = designware_eth_write_hwaddr,
|
|
};
|
|
|
|
const struct rk_gmac_ops px30_gmac_ops = {
|
|
.fix_mac_speed = px30_gmac_fix_mac_speed,
|
|
.set_to_rmii = px30_gmac_set_to_rmii,
|
|
};
|
|
|
|
const struct rk_gmac_ops rk3228_gmac_ops = {
|
|
.fix_mac_speed = rk3228_gmac_fix_mac_speed,
|
|
.set_to_rgmii = rk3228_gmac_set_to_rgmii,
|
|
};
|
|
|
|
const struct rk_gmac_ops rk3288_gmac_ops = {
|
|
.fix_mac_speed = rk3288_gmac_fix_mac_speed,
|
|
.set_to_rgmii = rk3288_gmac_set_to_rgmii,
|
|
};
|
|
|
|
const struct rk_gmac_ops rk3308_gmac_ops = {
|
|
.fix_mac_speed = rk3308_gmac_fix_mac_speed,
|
|
.set_to_rmii = rk3308_gmac_set_to_rmii,
|
|
};
|
|
|
|
const struct rk_gmac_ops rk3328_gmac_ops = {
|
|
.fix_mac_speed = rk3328_gmac_fix_mac_speed,
|
|
.set_to_rgmii = rk3328_gmac_set_to_rgmii,
|
|
};
|
|
|
|
const struct rk_gmac_ops rk3368_gmac_ops = {
|
|
.fix_mac_speed = rk3368_gmac_fix_mac_speed,
|
|
.set_to_rgmii = rk3368_gmac_set_to_rgmii,
|
|
};
|
|
|
|
const struct rk_gmac_ops rk3399_gmac_ops = {
|
|
.fix_mac_speed = rk3399_gmac_fix_mac_speed,
|
|
.set_to_rgmii = rk3399_gmac_set_to_rgmii,
|
|
};
|
|
|
|
const struct rk_gmac_ops rv1108_gmac_ops = {
|
|
.fix_mac_speed = rv1108_set_rmii_speed,
|
|
.set_to_rmii = rv1108_gmac_set_to_rmii,
|
|
};
|
|
|
|
static const struct udevice_id rockchip_gmac_ids[] = {
|
|
{ .compatible = "rockchip,px30-gmac",
|
|
.data = (ulong)&px30_gmac_ops },
|
|
{ .compatible = "rockchip,rk3228-gmac",
|
|
.data = (ulong)&rk3228_gmac_ops },
|
|
{ .compatible = "rockchip,rk3288-gmac",
|
|
.data = (ulong)&rk3288_gmac_ops },
|
|
{ .compatible = "rockchip,rk3308-mac",
|
|
.data = (ulong)&rk3308_gmac_ops },
|
|
{ .compatible = "rockchip,rk3328-gmac",
|
|
.data = (ulong)&rk3328_gmac_ops },
|
|
{ .compatible = "rockchip,rk3368-gmac",
|
|
.data = (ulong)&rk3368_gmac_ops },
|
|
{ .compatible = "rockchip,rk3399-gmac",
|
|
.data = (ulong)&rk3399_gmac_ops },
|
|
{ .compatible = "rockchip,rv1108-gmac",
|
|
.data = (ulong)&rv1108_gmac_ops },
|
|
{ }
|
|
};
|
|
|
|
U_BOOT_DRIVER(eth_gmac_rockchip) = {
|
|
.name = "gmac_rockchip",
|
|
.id = UCLASS_ETH,
|
|
.of_match = rockchip_gmac_ids,
|
|
.of_to_plat = gmac_rockchip_of_to_plat,
|
|
.probe = gmac_rockchip_probe,
|
|
.ops = &gmac_rockchip_eth_ops,
|
|
.priv_auto = sizeof(struct dw_eth_dev),
|
|
.plat_auto = sizeof(struct gmac_rockchip_plat),
|
|
.flags = DM_FLAG_ALLOC_PRIV_DMA,
|
|
};
|