u-boot/board/timll/devkit3250/devkit3250.c
Vladimir Zapolskiy 463ec1caa3 devkit3250: add Timll DevKit3250 board initial support
This change adds a basic support for Embest/Timll DevKit3250 board,
NOR and UART are the only supported peripherals for a moment. The board
doesn't require low-level init, because the initial SDRAM and GPIO
configuration is performed during kickstart bootloader execution.

Signed-off-by: Vladimir Zapolskiy <vz@mleia.com>
Cc: Albert ARIBAUD <albert.u.boot@aribaud.net>
Acked-by: Marek Vasut <marek.vasut@gmail.com>
2012-05-15 08:31:22 +02:00

65 lines
1.8 KiB
C

/*
* Embest/Timll DevKit3250 board support
*
* Copyright (C) 2011 Vladimir Zapolskiy <vz@mleia.com>
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License as
* published by the Free Software Foundation; either version 2 of
* the License, or (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
* MA 02110-1301, USA.
*/
#include <common.h>
#include <asm/arch/sys_proto.h>
#include <asm/arch/cpu.h>
#include <asm/arch/emc.h>
DECLARE_GLOBAL_DATA_PTR;
static struct emc_regs *emc = (struct emc_regs *)EMC_BASE;
int board_early_init_f(void)
{
lpc32xx_uart_init(CONFIG_SYS_LPC32XX_UART);
return 0;
}
int board_init(void)
{
/* adress of boot parameters */
gd->bd->bi_boot_params = CONFIG_SYS_SDRAM_BASE + 0x100;
#ifdef CONFIG_SYS_FLASH_CFI
/* Use 16-bit memory interface for NOR Flash */
emc->stat[0].config = EMC_STAT_CONFIG_PB | EMC_STAT_CONFIG_16BIT;
/* Change the NOR timings to optimum value to get maximum bandwidth */
emc->stat[0].waitwen = EMC_STAT_WAITWEN(1);
emc->stat[0].waitoen = EMC_STAT_WAITOEN(1);
emc->stat[0].waitrd = EMC_STAT_WAITRD(12);
emc->stat[0].waitpage = EMC_STAT_WAITPAGE(12);
emc->stat[0].waitwr = EMC_STAT_WAITWR(5);
emc->stat[0].waitturn = EMC_STAT_WAITTURN(2);
#endif
return 0;
}
int dram_init(void)
{
gd->ram_size = get_ram_size((void *)CONFIG_SYS_SDRAM_BASE,
CONFIG_SYS_SDRAM_SIZE);
return 0;
}