u-boot/arch/blackfin/cpu/gpio.c
Mike Frysinger 4638b21f2e Blackfin: import gpio/portmux layer from Linux
The current pinmux handling has spread throughout Blackfin drivers and
board code and is getting hideous to maintain.  So import the gpio and
portmux layer from the Blackfin Linux code.  This should spur a serious
of cleanups across the Blackfin tree.

Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2010-07-05 05:30:07 -04:00

854 lines
20 KiB
C

/*
* GPIO Abstraction Layer
*
* Copyright 2006-2010 Analog Devices Inc.
*
* Licensed under the GPL-2 or later
*/
#include <common.h>
#include <asm/errno.h>
#include <asm/gpio.h>
#include <asm/portmux.h>
#if ANOMALY_05000311 || ANOMALY_05000323
enum {
AWA_data = SYSCR,
AWA_data_clear = SYSCR,
AWA_data_set = SYSCR,
AWA_toggle = SYSCR,
AWA_maska = UART_SCR,
AWA_maska_clear = UART_SCR,
AWA_maska_set = UART_SCR,
AWA_maska_toggle = UART_SCR,
AWA_maskb = UART_GCTL,
AWA_maskb_clear = UART_GCTL,
AWA_maskb_set = UART_GCTL,
AWA_maskb_toggle = UART_GCTL,
AWA_dir = SPORT1_STAT,
AWA_polar = SPORT1_STAT,
AWA_edge = SPORT1_STAT,
AWA_both = SPORT1_STAT,
#if ANOMALY_05000311
AWA_inen = TIMER_ENABLE,
#elif ANOMALY_05000323
AWA_inen = DMA1_1_CONFIG,
#endif
};
/* Anomaly Workaround */
#define AWA_DUMMY_READ(name) bfin_read16(AWA_ ## name)
#else
#define AWA_DUMMY_READ(...) do { } while (0)
#endif
static struct gpio_port_t * const gpio_array[] = {
#if defined(BF533_FAMILY)
(struct gpio_port_t *) FIO_FLAG_D,
#elif defined(CONFIG_BF52x) || defined(BF537_FAMILY) || defined(CONFIG_BF51x) \
|| defined(BF538_FAMILY)
(struct gpio_port_t *) PORTFIO,
# if !defined(BF538_FAMILY)
(struct gpio_port_t *) PORTGIO,
(struct gpio_port_t *) PORTHIO,
# endif
#elif defined(BF561_FAMILY)
(struct gpio_port_t *) FIO0_FLAG_D,
(struct gpio_port_t *) FIO1_FLAG_D,
(struct gpio_port_t *) FIO2_FLAG_D,
#elif defined(CONFIG_BF54x)
(struct gpio_port_t *)PORTA_FER,
(struct gpio_port_t *)PORTB_FER,
(struct gpio_port_t *)PORTC_FER,
(struct gpio_port_t *)PORTD_FER,
(struct gpio_port_t *)PORTE_FER,
(struct gpio_port_t *)PORTF_FER,
(struct gpio_port_t *)PORTG_FER,
(struct gpio_port_t *)PORTH_FER,
(struct gpio_port_t *)PORTI_FER,
(struct gpio_port_t *)PORTJ_FER,
#else
# error no gpio arrays defined
#endif
};
#if defined(CONFIG_BF52x) || defined(BF537_FAMILY) || defined(CONFIG_BF51x)
static unsigned short * const port_fer[] = {
(unsigned short *) PORTF_FER,
(unsigned short *) PORTG_FER,
(unsigned short *) PORTH_FER,
};
# if !defined(BF537_FAMILY)
static unsigned short * const port_mux[] = {
(unsigned short *) PORTF_MUX,
(unsigned short *) PORTG_MUX,
(unsigned short *) PORTH_MUX,
};
static const
u8 pmux_offset[][16] = {
# if defined(CONFIG_BF52x)
{ 0, 0, 0, 0, 0, 0, 0, 0, 2, 2, 4, 6, 8, 8, 10, 10 }, /* PORTF */
{ 0, 0, 0, 0, 0, 2, 2, 4, 4, 6, 8, 10, 10, 10, 12, 12 }, /* PORTG */
{ 0, 0, 0, 0, 0, 0, 0, 0, 2, 4, 4, 4, 4, 4, 4, 4 }, /* PORTH */
# elif defined(CONFIG_BF51x)
{ 0, 2, 2, 2, 2, 2, 2, 4, 6, 6, 6, 8, 8, 8, 8, 10 }, /* PORTF */
{ 0, 0, 0, 2, 4, 6, 6, 6, 8, 10, 10, 12, 14, 14, 14, 14 }, /* PORTG */
{ 0, 0, 0, 0, 2, 2, 4, 6, 10, 10, 10, 10, 10, 10, 10, 10 }, /* PORTH */
# endif
};
# endif
#elif defined(BF538_FAMILY)
static unsigned short * const port_fer[] = {
(unsigned short *) PORTCIO_FER,
(unsigned short *) PORTDIO_FER,
(unsigned short *) PORTEIO_FER,
};
#endif
#ifdef CONFIG_BFIN_GPIO_TRACK
#define RESOURCE_LABEL_SIZE 16
static struct str_ident {
char name[RESOURCE_LABEL_SIZE];
} str_ident[MAX_RESOURCES];
static void gpio_error(unsigned gpio)
{
printf("bfin-gpio: GPIO %d wasn't requested!\n", gpio);
}
static void set_label(unsigned short ident, const char *label)
{
if (label) {
strncpy(str_ident[ident].name, label,
RESOURCE_LABEL_SIZE);
str_ident[ident].name[RESOURCE_LABEL_SIZE - 1] = 0;
}
}
static char *get_label(unsigned short ident)
{
return (*str_ident[ident].name ? str_ident[ident].name : "UNKNOWN");
}
static int cmp_label(unsigned short ident, const char *label)
{
if (label == NULL)
printf("bfin-gpio: please provide none-null label\n");
if (label)
return strcmp(str_ident[ident].name, label);
else
return -EINVAL;
}
#define map_entry(m, i) reserved_##m##_map[gpio_bank(i)]
#define is_reserved(m, i, e) (map_entry(m, i) & gpio_bit(i))
#define reserve(m, i) (map_entry(m, i) |= gpio_bit(i))
#define unreserve(m, i) (map_entry(m, i) &= ~gpio_bit(i))
#define DECLARE_RESERVED_MAP(m, c) static unsigned short reserved_##m##_map[c]
#else
#define is_reserved(m, i, e) (!(e))
#define reserve(m, i)
#define unreserve(m, i)
#define DECLARE_RESERVED_MAP(m, c)
#define gpio_error(gpio)
#define set_label(...)
#define get_label(...) ""
#define cmp_label(...) 1
#endif
DECLARE_RESERVED_MAP(gpio, GPIO_BANK_NUM);
DECLARE_RESERVED_MAP(peri, gpio_bank(MAX_RESOURCES));
inline int check_gpio(unsigned gpio)
{
#if defined(CONFIG_BF54x)
if (gpio == GPIO_PB15 || gpio == GPIO_PC14 || gpio == GPIO_PC15
|| gpio == GPIO_PH14 || gpio == GPIO_PH15
|| gpio == GPIO_PJ14 || gpio == GPIO_PJ15)
return -EINVAL;
#endif
if (gpio >= MAX_BLACKFIN_GPIOS)
return -EINVAL;
return 0;
}
static void port_setup(unsigned gpio, unsigned short usage)
{
#if defined(BF538_FAMILY)
/*
* BF538/9 Port C,D and E are special.
* Inverted PORT_FER polarity on CDE and no PORF_FER on F
* Regular PORT F GPIOs are handled here, CDE are exclusively
* managed by GPIOLIB
*/
if (gpio < MAX_BLACKFIN_GPIOS || gpio >= MAX_RESOURCES)
return;
gpio -= MAX_BLACKFIN_GPIOS;
if (usage == GPIO_USAGE)
*port_fer[gpio_bank(gpio)] |= gpio_bit(gpio);
else
*port_fer[gpio_bank(gpio)] &= ~gpio_bit(gpio);
SSYNC();
return;
#endif
if (check_gpio(gpio))
return;
#if defined(CONFIG_BF52x) || defined(BF537_FAMILY) || defined(CONFIG_BF51x)
if (usage == GPIO_USAGE)
*port_fer[gpio_bank(gpio)] &= ~gpio_bit(gpio);
else
*port_fer[gpio_bank(gpio)] |= gpio_bit(gpio);
SSYNC();
#elif defined(CONFIG_BF54x)
if (usage == GPIO_USAGE)
gpio_array[gpio_bank(gpio)]->port_fer &= ~gpio_bit(gpio);
else
gpio_array[gpio_bank(gpio)]->port_fer |= gpio_bit(gpio);
SSYNC();
#endif
}
#ifdef BF537_FAMILY
static struct {
unsigned short res;
unsigned short offset;
} port_mux_lut[] = {
{.res = P_PPI0_D13, .offset = 11},
{.res = P_PPI0_D14, .offset = 11},
{.res = P_PPI0_D15, .offset = 11},
{.res = P_SPORT1_TFS, .offset = 11},
{.res = P_SPORT1_TSCLK, .offset = 11},
{.res = P_SPORT1_DTPRI, .offset = 11},
{.res = P_PPI0_D10, .offset = 10},
{.res = P_PPI0_D11, .offset = 10},
{.res = P_PPI0_D12, .offset = 10},
{.res = P_SPORT1_RSCLK, .offset = 10},
{.res = P_SPORT1_RFS, .offset = 10},
{.res = P_SPORT1_DRPRI, .offset = 10},
{.res = P_PPI0_D8, .offset = 9},
{.res = P_PPI0_D9, .offset = 9},
{.res = P_SPORT1_DRSEC, .offset = 9},
{.res = P_SPORT1_DTSEC, .offset = 9},
{.res = P_TMR2, .offset = 8},
{.res = P_PPI0_FS3, .offset = 8},
{.res = P_TMR3, .offset = 7},
{.res = P_SPI0_SSEL4, .offset = 7},
{.res = P_TMR4, .offset = 6},
{.res = P_SPI0_SSEL5, .offset = 6},
{.res = P_TMR5, .offset = 5},
{.res = P_SPI0_SSEL6, .offset = 5},
{.res = P_UART1_RX, .offset = 4},
{.res = P_UART1_TX, .offset = 4},
{.res = P_TMR6, .offset = 4},
{.res = P_TMR7, .offset = 4},
{.res = P_UART0_RX, .offset = 3},
{.res = P_UART0_TX, .offset = 3},
{.res = P_DMAR0, .offset = 3},
{.res = P_DMAR1, .offset = 3},
{.res = P_SPORT0_DTSEC, .offset = 1},
{.res = P_SPORT0_DRSEC, .offset = 1},
{.res = P_CAN0_RX, .offset = 1},
{.res = P_CAN0_TX, .offset = 1},
{.res = P_SPI0_SSEL7, .offset = 1},
{.res = P_SPORT0_TFS, .offset = 0},
{.res = P_SPORT0_DTPRI, .offset = 0},
{.res = P_SPI0_SSEL2, .offset = 0},
{.res = P_SPI0_SSEL3, .offset = 0},
};
static void portmux_setup(unsigned short per)
{
u16 y, offset, muxreg;
u16 function = P_FUNCT2MUX(per);
for (y = 0; y < ARRAY_SIZE(port_mux_lut); y++) {
if (port_mux_lut[y].res == per) {
/* SET PORTMUX REG */
offset = port_mux_lut[y].offset;
muxreg = bfin_read_PORT_MUX();
if (offset != 1)
muxreg &= ~(1 << offset);
else
muxreg &= ~(3 << 1);
muxreg |= (function << offset);
bfin_write_PORT_MUX(muxreg);
}
}
}
#elif defined(CONFIG_BF54x)
inline void portmux_setup(unsigned short per)
{
u32 pmux;
u16 ident = P_IDENT(per);
u16 function = P_FUNCT2MUX(per);
pmux = gpio_array[gpio_bank(ident)]->port_mux;
pmux &= ~(0x3 << (2 * gpio_sub_n(ident)));
pmux |= (function & 0x3) << (2 * gpio_sub_n(ident));
gpio_array[gpio_bank(ident)]->port_mux = pmux;
}
inline u16 get_portmux(unsigned short per)
{
u32 pmux;
u16 ident = P_IDENT(per);
pmux = gpio_array[gpio_bank(ident)]->port_mux;
return (pmux >> (2 * gpio_sub_n(ident)) & 0x3);
}
#elif defined(CONFIG_BF52x) || defined(CONFIG_BF51x)
inline void portmux_setup(unsigned short per)
{
u16 pmux, ident = P_IDENT(per), function = P_FUNCT2MUX(per);
u8 offset = pmux_offset[gpio_bank(ident)][gpio_sub_n(ident)];
pmux = *port_mux[gpio_bank(ident)];
pmux &= ~(3 << offset);
pmux |= (function & 3) << offset;
*port_mux[gpio_bank(ident)] = pmux;
SSYNC();
}
#else
# define portmux_setup(...) do { } while (0)
#endif
#ifndef CONFIG_BF54x
/***********************************************************
*
* FUNCTIONS: Blackfin General Purpose Ports Access Functions
*
* INPUTS/OUTPUTS:
* gpio - GPIO Number between 0 and MAX_BLACKFIN_GPIOS
*
*
* DESCRIPTION: These functions abstract direct register access
* to Blackfin processor General Purpose
* Ports Regsiters
*
* CAUTION: These functions do not belong to the GPIO Driver API
*************************************************************
* MODIFICATION HISTORY :
**************************************************************/
/* Set a specific bit */
#define SET_GPIO(name) \
void set_gpio_ ## name(unsigned gpio, unsigned short arg) \
{ \
unsigned long flags; \
local_irq_save(flags); \
if (arg) \
gpio_array[gpio_bank(gpio)]->name |= gpio_bit(gpio); \
else \
gpio_array[gpio_bank(gpio)]->name &= ~gpio_bit(gpio); \
AWA_DUMMY_READ(name); \
local_irq_restore(flags); \
}
SET_GPIO(dir) /* set_gpio_dir() */
SET_GPIO(inen) /* set_gpio_inen() */
SET_GPIO(polar) /* set_gpio_polar() */
SET_GPIO(edge) /* set_gpio_edge() */
SET_GPIO(both) /* set_gpio_both() */
#define SET_GPIO_SC(name) \
void set_gpio_ ## name(unsigned gpio, unsigned short arg) \
{ \
unsigned long flags; \
if (ANOMALY_05000311 || ANOMALY_05000323) \
local_irq_save(flags); \
if (arg) \
gpio_array[gpio_bank(gpio)]->name ## _set = gpio_bit(gpio); \
else \
gpio_array[gpio_bank(gpio)]->name ## _clear = gpio_bit(gpio); \
if (ANOMALY_05000311 || ANOMALY_05000323) { \
AWA_DUMMY_READ(name); \
local_irq_restore(flags); \
} \
}
SET_GPIO_SC(maska)
SET_GPIO_SC(maskb)
SET_GPIO_SC(data)
void set_gpio_toggle(unsigned gpio)
{
unsigned long flags;
if (ANOMALY_05000311 || ANOMALY_05000323)
local_irq_save(flags);
gpio_array[gpio_bank(gpio)]->toggle = gpio_bit(gpio);
if (ANOMALY_05000311 || ANOMALY_05000323) {
AWA_DUMMY_READ(toggle);
local_irq_restore(flags);
}
}
/* Set current PORT date (16-bit word) */
#define SET_GPIO_P(name) \
void set_gpiop_ ## name(unsigned gpio, unsigned short arg) \
{ \
unsigned long flags; \
if (ANOMALY_05000311 || ANOMALY_05000323) \
local_irq_save(flags); \
gpio_array[gpio_bank(gpio)]->name = arg; \
if (ANOMALY_05000311 || ANOMALY_05000323) { \
AWA_DUMMY_READ(name); \
local_irq_restore(flags); \
} \
}
SET_GPIO_P(data)
SET_GPIO_P(dir)
SET_GPIO_P(inen)
SET_GPIO_P(polar)
SET_GPIO_P(edge)
SET_GPIO_P(both)
SET_GPIO_P(maska)
SET_GPIO_P(maskb)
/* Get a specific bit */
#define GET_GPIO(name) \
unsigned short get_gpio_ ## name(unsigned gpio) \
{ \
unsigned long flags; \
unsigned short ret; \
if (ANOMALY_05000311 || ANOMALY_05000323) \
local_irq_save(flags); \
ret = 0x01 & (gpio_array[gpio_bank(gpio)]->name >> gpio_sub_n(gpio)); \
if (ANOMALY_05000311 || ANOMALY_05000323) { \
AWA_DUMMY_READ(name); \
local_irq_restore(flags); \
} \
return ret; \
}
GET_GPIO(data)
GET_GPIO(dir)
GET_GPIO(inen)
GET_GPIO(polar)
GET_GPIO(edge)
GET_GPIO(both)
GET_GPIO(maska)
GET_GPIO(maskb)
/* Get current PORT date (16-bit word) */
#define GET_GPIO_P(name) \
unsigned short get_gpiop_ ## name(unsigned gpio) \
{ \
unsigned long flags; \
unsigned short ret; \
if (ANOMALY_05000311 || ANOMALY_05000323) \
local_irq_save(flags); \
ret = (gpio_array[gpio_bank(gpio)]->name); \
if (ANOMALY_05000311 || ANOMALY_05000323) { \
AWA_DUMMY_READ(name); \
local_irq_restore(flags); \
} \
return ret; \
}
GET_GPIO_P(data)
GET_GPIO_P(dir)
GET_GPIO_P(inen)
GET_GPIO_P(polar)
GET_GPIO_P(edge)
GET_GPIO_P(both)
GET_GPIO_P(maska)
GET_GPIO_P(maskb)
#else /* CONFIG_BF54x */
unsigned short get_gpio_dir(unsigned gpio)
{
return (0x01 & (gpio_array[gpio_bank(gpio)]->dir_clear >> gpio_sub_n(gpio)));
}
#endif /* CONFIG_BF54x */
/***********************************************************
*
* FUNCTIONS: Blackfin Peripheral Resource Allocation
* and PortMux Setup
*
* INPUTS/OUTPUTS:
* per Peripheral Identifier
* label String
*
* DESCRIPTION: Blackfin Peripheral Resource Allocation and Setup API
*
* CAUTION:
*************************************************************
* MODIFICATION HISTORY :
**************************************************************/
int peripheral_request(unsigned short per, const char *label)
{
unsigned short ident = P_IDENT(per);
/*
* Don't cares are pins with only one dedicated function
*/
if (per & P_DONTCARE)
return 0;
if (!(per & P_DEFINED))
return -ENODEV;
BUG_ON(ident >= MAX_RESOURCES);
/* If a pin can be muxed as either GPIO or peripheral, make
* sure it is not already a GPIO pin when we request it.
*/
if (unlikely(!check_gpio(ident) && is_reserved(gpio, ident, 1))) {
printf("%s: Peripheral %d is already reserved as GPIO by %s !\n",
__func__, ident, get_label(ident));
return -EBUSY;
}
if (unlikely(is_reserved(peri, ident, 1))) {
/*
* Pin functions like AMC address strobes my
* be requested and used by several drivers
*/
#ifdef CONFIG_BF54x
if (!((per & P_MAYSHARE) && get_portmux(per) == P_FUNCT2MUX(per))) {
#else
if (!(per & P_MAYSHARE)) {
#endif
/*
* Allow that the identical pin function can
* be requested from the same driver twice
*/
if (cmp_label(ident, label) == 0)
goto anyway;
printf("%s: Peripheral %d function %d is already reserved by %s !\n",
__func__, ident, P_FUNCT2MUX(per), get_label(ident));
return -EBUSY;
}
}
anyway:
reserve(peri, ident);
portmux_setup(per);
port_setup(ident, PERIPHERAL_USAGE);
set_label(ident, label);
return 0;
}
int peripheral_request_list(const unsigned short per[], const char *label)
{
u16 cnt;
int ret;
for (cnt = 0; per[cnt] != 0; cnt++) {
ret = peripheral_request(per[cnt], label);
if (ret < 0) {
for ( ; cnt > 0; cnt--)
peripheral_free(per[cnt - 1]);
return ret;
}
}
return 0;
}
void peripheral_free(unsigned short per)
{
unsigned short ident = P_IDENT(per);
if (per & P_DONTCARE)
return;
if (!(per & P_DEFINED))
return;
if (unlikely(!is_reserved(peri, ident, 0)))
return;
if (!(per & P_MAYSHARE))
port_setup(ident, GPIO_USAGE);
unreserve(peri, ident);
set_label(ident, "free");
}
void peripheral_free_list(const unsigned short per[])
{
u16 cnt;
for (cnt = 0; per[cnt] != 0; cnt++)
peripheral_free(per[cnt]);
}
/***********************************************************
*
* FUNCTIONS: Blackfin GPIO Driver
*
* INPUTS/OUTPUTS:
* gpio PIO Number between 0 and MAX_BLACKFIN_GPIOS
* label String
*
* DESCRIPTION: Blackfin GPIO Driver API
*
* CAUTION:
*************************************************************
* MODIFICATION HISTORY :
**************************************************************/
int bfin_gpio_request(unsigned gpio, const char *label)
{
if (check_gpio(gpio) < 0)
return -EINVAL;
/*
* Allow that the identical GPIO can
* be requested from the same driver twice
* Do nothing and return -
*/
if (cmp_label(gpio, label) == 0)
return 0;
if (unlikely(is_reserved(gpio, gpio, 1))) {
printf("bfin-gpio: GPIO %d is already reserved by %s !\n",
gpio, get_label(gpio));
return -EBUSY;
}
if (unlikely(is_reserved(peri, gpio, 1))) {
printf("bfin-gpio: GPIO %d is already reserved as Peripheral by %s !\n",
gpio, get_label(gpio));
return -EBUSY;
}
#ifndef CONFIG_BF54x
else { /* Reset POLAR setting when acquiring a gpio for the first time */
set_gpio_polar(gpio, 0);
}
#endif
reserve(gpio, gpio);
set_label(gpio, label);
port_setup(gpio, GPIO_USAGE);
return 0;
}
void bfin_gpio_free(unsigned gpio)
{
if (check_gpio(gpio) < 0)
return;
if (unlikely(!is_reserved(gpio, gpio, 0))) {
gpio_error(gpio);
return;
}
unreserve(gpio, gpio);
set_label(gpio, "free");
}
#ifdef BFIN_SPECIAL_GPIO_BANKS
DECLARE_RESERVED_MAP(special_gpio, gpio_bank(MAX_RESOURCES));
int bfin_special_gpio_request(unsigned gpio, const char *label)
{
/*
* Allow that the identical GPIO can
* be requested from the same driver twice
* Do nothing and return -
*/
if (cmp_label(gpio, label) == 0)
return 0;
if (unlikely(is_reserved(special_gpio, gpio, 1))) {
printf("bfin-gpio: GPIO %d is already reserved by %s !\n",
gpio, get_label(gpio));
return -EBUSY;
}
if (unlikely(is_reserved(peri, gpio, 1))) {
printf("bfin-gpio: GPIO %d is already reserved as Peripheral by %s !\n",
gpio, get_label(gpio));
return -EBUSY;
}
reserve(special_gpio, gpio);
reserve(peri, gpio);
set_label(gpio, label);
port_setup(gpio, GPIO_USAGE);
return 0;
}
void bfin_special_gpio_free(unsigned gpio)
{
if (unlikely(!is_reserved(special_gpio, gpio, 0))) {
gpio_error(gpio);
return;
}
reserve(special_gpio, gpio);
reserve(peri, gpio);
set_label(gpio, "free");
}
#endif
static inline void __bfin_gpio_direction_input(unsigned gpio)
{
#ifdef CONFIG_BF54x
gpio_array[gpio_bank(gpio)]->dir_clear = gpio_bit(gpio);
#else
gpio_array[gpio_bank(gpio)]->dir &= ~gpio_bit(gpio);
#endif
gpio_array[gpio_bank(gpio)]->inen |= gpio_bit(gpio);
}
int bfin_gpio_direction_input(unsigned gpio)
{
unsigned long flags;
if (!is_reserved(gpio, gpio, 0)) {
gpio_error(gpio);
return -EINVAL;
}
local_irq_save(flags);
__bfin_gpio_direction_input(gpio);
AWA_DUMMY_READ(inen);
local_irq_restore(flags);
return 0;
}
void bfin_gpio_toggle_value(unsigned gpio)
{
#ifdef CONFIG_BF54x
gpio_set_value(gpio, !gpio_get_value(gpio));
#else
gpio_array[gpio_bank(gpio)]->toggle = gpio_bit(gpio);
#endif
}
void bfin_gpio_set_value(unsigned gpio, int arg)
{
if (arg)
gpio_array[gpio_bank(gpio)]->data_set = gpio_bit(gpio);
else
gpio_array[gpio_bank(gpio)]->data_clear = gpio_bit(gpio);
}
int bfin_gpio_direction_output(unsigned gpio, int value)
{
unsigned long flags;
if (!is_reserved(gpio, gpio, 0)) {
gpio_error(gpio);
return -EINVAL;
}
local_irq_save(flags);
gpio_array[gpio_bank(gpio)]->inen &= ~gpio_bit(gpio);
gpio_set_value(gpio, value);
#ifdef CONFIG_BF54x
gpio_array[gpio_bank(gpio)]->dir_set = gpio_bit(gpio);
#else
gpio_array[gpio_bank(gpio)]->dir |= gpio_bit(gpio);
#endif
AWA_DUMMY_READ(dir);
local_irq_restore(flags);
return 0;
}
int bfin_gpio_get_value(unsigned gpio)
{
#ifdef CONFIG_BF54x
return (1 & (gpio_array[gpio_bank(gpio)]->data >> gpio_sub_n(gpio)));
#else
unsigned long flags;
if (unlikely(get_gpio_edge(gpio))) {
int ret;
local_irq_save(flags);
set_gpio_edge(gpio, 0);
ret = get_gpio_data(gpio);
set_gpio_edge(gpio, 1);
local_irq_restore(flags);
return ret;
} else
return get_gpio_data(gpio);
#endif
}
/* If we are booting from SPI and our board lacks a strong enough pull up,
* the core can reset and execute the bootrom faster than the resistor can
* pull the signal logically high. To work around this (common) error in
* board design, we explicitly set the pin back to GPIO mode, force /CS
* high, and wait for the electrons to do their thing.
*
* This function only makes sense to be called from reset code, but it
* lives here as we need to force all the GPIO states w/out going through
* BUG() checks and such.
*/
void bfin_reset_boot_spi_cs(unsigned short pin)
{
unsigned short gpio = P_IDENT(pin);
port_setup(gpio, GPIO_USAGE);
gpio_array[gpio_bank(gpio)]->data_set = gpio_bit(gpio);
AWA_DUMMY_READ(data_set);
udelay(1);
}
#ifdef CONFIG_BFIN_GPIO_TRACK
void bfin_gpio_labels(void)
{
int c, gpio;
for (c = 0; c < MAX_RESOURCES; c++) {
gpio = is_reserved(gpio, c, 1);
if (!check_gpio(c) && gpio)
printf("GPIO_%d:\t%s\tGPIO %s\n", c,
get_label(c),
get_gpio_dir(c) ? "OUTPUT" : "INPUT");
else if (is_reserved(peri, c, 1))
printf("GPIO_%d:\t%s\tPeripheral\n", c, get_label(c));
else
continue;
}
}
#endif