mirror of
https://github.com/AsahiLinux/u-boot
synced 2024-12-04 02:20:25 +00:00
32c81ea65c
Move MX5 specific set_chipselect_size function into generic i.MX part, such that MX6 based boards are able to use this function as well. While doing this the iomuxc gpr member needed to be consolidated between MX5 and MX6. Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
116 lines
2.5 KiB
C
116 lines
2.5 KiB
C
/*
|
|
* (C) Copyright 2007
|
|
* Sascha Hauer, Pengutronix
|
|
*
|
|
* (C) Copyright 2009 Freescale Semiconductor, Inc.
|
|
*
|
|
* SPDX-License-Identifier: GPL-2.0+
|
|
*/
|
|
|
|
#include <common.h>
|
|
#include <asm/arch/imx-regs.h>
|
|
#include <asm/arch/clock.h>
|
|
#include <asm/arch/sys_proto.h>
|
|
|
|
#include <asm/errno.h>
|
|
#include <asm/io.h>
|
|
#include <asm/imx-common/boot_mode.h>
|
|
|
|
#if !(defined(CONFIG_MX51) || defined(CONFIG_MX53))
|
|
#error "CPU_TYPE not defined"
|
|
#endif
|
|
|
|
u32 get_cpu_rev(void)
|
|
{
|
|
#ifdef CONFIG_MX51
|
|
int system_rev = 0x51000;
|
|
#else
|
|
int system_rev = 0x53000;
|
|
#endif
|
|
int reg = __raw_readl(ROM_SI_REV);
|
|
|
|
#if defined(CONFIG_MX51)
|
|
switch (reg) {
|
|
case 0x02:
|
|
system_rev |= CHIP_REV_1_1;
|
|
break;
|
|
case 0x10:
|
|
if ((__raw_readl(GPIO1_BASE_ADDR + 0x0) & (0x1 << 22)) == 0)
|
|
system_rev |= CHIP_REV_2_5;
|
|
else
|
|
system_rev |= CHIP_REV_2_0;
|
|
break;
|
|
case 0x20:
|
|
system_rev |= CHIP_REV_3_0;
|
|
break;
|
|
default:
|
|
system_rev |= CHIP_REV_1_0;
|
|
break;
|
|
}
|
|
#else
|
|
if (reg < 0x20)
|
|
system_rev |= CHIP_REV_1_0;
|
|
else
|
|
system_rev |= reg;
|
|
#endif
|
|
return system_rev;
|
|
}
|
|
|
|
#ifdef CONFIG_REVISION_TAG
|
|
u32 __weak get_board_rev(void)
|
|
{
|
|
return get_cpu_rev();
|
|
}
|
|
#endif
|
|
|
|
#ifndef CONFIG_SYS_DCACHE_OFF
|
|
void enable_caches(void)
|
|
{
|
|
/* Enable D-cache. I-cache is already enabled in start.S */
|
|
dcache_enable();
|
|
}
|
|
#endif
|
|
|
|
#if defined(CONFIG_FEC_MXC)
|
|
void imx_get_mac_from_fuse(int dev_id, unsigned char *mac)
|
|
{
|
|
int i;
|
|
struct iim_regs *iim = (struct iim_regs *)IMX_IIM_BASE;
|
|
struct fuse_bank *bank = &iim->bank[1];
|
|
struct fuse_bank1_regs *fuse =
|
|
(struct fuse_bank1_regs *)bank->fuse_regs;
|
|
|
|
for (i = 0; i < 6; i++)
|
|
mac[i] = readl(&fuse->mac_addr[i]) & 0xff;
|
|
}
|
|
#endif
|
|
|
|
#ifdef CONFIG_MX53
|
|
void boot_mode_apply(unsigned cfg_val)
|
|
{
|
|
writel(cfg_val, &((struct srtc_regs *)SRTC_BASE_ADDR)->lpgr);
|
|
}
|
|
/*
|
|
* cfg_val will be used for
|
|
* Boot_cfg3[7:0]:Boot_cfg2[7:0]:Boot_cfg1[7:0]
|
|
*
|
|
* If bit 28 of LPGR is set upon watchdog reset,
|
|
* bits[25:0] of LPGR will move to SBMR.
|
|
*/
|
|
const struct boot_mode soc_boot_modes[] = {
|
|
{"normal", MAKE_CFGVAL(0x00, 0x00, 0x00, 0x00)},
|
|
/* usb or serial download */
|
|
{"usb", MAKE_CFGVAL(0x00, 0x00, 0x00, 0x13)},
|
|
{"sata", MAKE_CFGVAL(0x28, 0x00, 0x00, 0x12)},
|
|
{"escpi1:0", MAKE_CFGVAL(0x38, 0x20, 0x00, 0x12)},
|
|
{"escpi1:1", MAKE_CFGVAL(0x38, 0x20, 0x04, 0x12)},
|
|
{"escpi1:2", MAKE_CFGVAL(0x38, 0x20, 0x08, 0x12)},
|
|
{"escpi1:3", MAKE_CFGVAL(0x38, 0x20, 0x0c, 0x12)},
|
|
/* 4 bit bus width */
|
|
{"esdhc1", MAKE_CFGVAL(0x40, 0x20, 0x00, 0x12)},
|
|
{"esdhc2", MAKE_CFGVAL(0x40, 0x20, 0x08, 0x12)},
|
|
{"esdhc3", MAKE_CFGVAL(0x40, 0x20, 0x10, 0x12)},
|
|
{"esdhc4", MAKE_CFGVAL(0x40, 0x20, 0x18, 0x12)},
|
|
{NULL, 0},
|
|
};
|
|
#endif
|