mirror of
https://github.com/AsahiLinux/u-boot
synced 2024-12-03 01:50:25 +00:00
159f4157b5
The PCIe controller on the M2 Pro/Max is different from the one found on earlier Apple SoCs. Some registers moved and te meaning of the bits in some other registers changed. But they are still similar enough to handle both controllers in the same driver. Signed-off-by: Mark Kettenis <kettenis@openbsd.org>
398 lines
10 KiB
C
398 lines
10 KiB
C
// SPDX-License-Identifier: GPL-2.0
|
|
/*
|
|
* PCIe host bridge driver for Apple system-on-chips.
|
|
*
|
|
* The HW is ECAM compliant.
|
|
*
|
|
* Initialization requires enabling power and clocks, along with a
|
|
* number of register pokes.
|
|
*
|
|
* Copyright (C) 2021 Alyssa Rosenzweig <alyssa@rosenzweig.io>
|
|
* Copyright (C) 2021 Google LLC
|
|
* Copyright (C) 2021 Corellium LLC
|
|
* Copyright (C) 2021 Mark Kettenis <kettenis@openbsd.org>
|
|
*
|
|
* Author: Alyssa Rosenzweig <alyssa@rosenzweig.io>
|
|
* Author: Marc Zyngier <maz@kernel.org>
|
|
*/
|
|
|
|
#include <common.h>
|
|
#include <dm.h>
|
|
#include <dm/device_compat.h>
|
|
#include <dm/devres.h>
|
|
#include <mapmem.h>
|
|
#include <pci.h>
|
|
#include <asm/io.h>
|
|
#include <asm-generic/gpio.h>
|
|
#include <linux/delay.h>
|
|
#include <linux/iopoll.h>
|
|
|
|
#define CORE_RC_PHYIF_CTL 0x00024
|
|
#define CORE_RC_PHYIF_CTL_RUN BIT(0)
|
|
#define CORE_RC_PHYIF_STAT 0x00028
|
|
#define CORE_RC_PHYIF_STAT_REFCLK BIT(4)
|
|
#define CORE_RC_CTL 0x00050
|
|
#define CORE_RC_CTL_RUN BIT(0)
|
|
#define CORE_RC_STAT 0x00058
|
|
#define CORE_RC_STAT_READY BIT(0)
|
|
#define CORE_FABRIC_STAT 0x04000
|
|
#define CORE_FABRIC_STAT_MASK 0x001F001F
|
|
|
|
#define CORE_PHY_DEFAULT_BASE(port) (0x84000 + 0x4000 * (port))
|
|
|
|
#define PHY_LANE_CFG 0x00000
|
|
#define PHY_LANE_CFG_REFCLK0REQ BIT(0)
|
|
#define PHY_LANE_CFG_REFCLK1REQ BIT(1)
|
|
#define PHY_LANE_CFG_REFCLK0ACK BIT(2)
|
|
#define PHY_LANE_CFG_REFCLK1ACK BIT(3)
|
|
#define PHY_LANE_CFG_REFCLKEN (BIT(9) | BIT(10))
|
|
#define PHY_LANE_CFG_REFCLKCGEN (BIT(30) | BIT(31))
|
|
#define PHY_LANE_CTL 0x00004
|
|
#define PHY_LANE_CTL_CFGACC BIT(15)
|
|
|
|
#define PORT_LTSSMCTL 0x00080
|
|
#define PORT_LTSSMCTL_START BIT(0)
|
|
#define PORT_INTSTAT 0x00100
|
|
#define PORT_INT_TUNNEL_ERR 31
|
|
#define PORT_INT_CPL_TIMEOUT 23
|
|
#define PORT_INT_RID2SID_MAPERR 22
|
|
#define PORT_INT_CPL_ABORT 21
|
|
#define PORT_INT_MSI_BAD_DATA 19
|
|
#define PORT_INT_MSI_ERR 18
|
|
#define PORT_INT_REQADDR_GT32 17
|
|
#define PORT_INT_AF_TIMEOUT 15
|
|
#define PORT_INT_LINK_DOWN 14
|
|
#define PORT_INT_LINK_UP 12
|
|
#define PORT_INT_LINK_BWMGMT 11
|
|
#define PORT_INT_AER_MASK (15 << 4)
|
|
#define PORT_INT_PORT_ERR 4
|
|
#define PORT_INT_INTx(i) i
|
|
#define PORT_INT_INTx_MASK 15
|
|
#define PORT_INTMSK 0x00104
|
|
#define PORT_INTMSKSET 0x00108
|
|
#define PORT_INTMSKCLR 0x0010c
|
|
#define PORT_MSICFG 0x00124
|
|
#define PORT_MSICFG_EN BIT(0)
|
|
#define PORT_MSICFG_L2MSINUM_SHIFT 4
|
|
#define PORT_MSIBASE 0x00128
|
|
#define PORT_MSIBASE_1_SHIFT 16
|
|
#define PORT_MSIADDR 0x00168
|
|
#define PORT_LINKSTS 0x00208
|
|
#define PORT_LINKSTS_UP BIT(0)
|
|
#define PORT_LINKSTS_BUSY BIT(2)
|
|
#define PORT_LINKCMDSTS 0x00210
|
|
#define PORT_OUTS_NPREQS 0x00284
|
|
#define PORT_OUTS_NPREQS_REQ BIT(24)
|
|
#define PORT_OUTS_NPREQS_CPL BIT(16)
|
|
#define PORT_RXWR_FIFO 0x00288
|
|
#define PORT_RXWR_FIFO_HDR GENMASK(15, 10)
|
|
#define PORT_RXWR_FIFO_DATA GENMASK(9, 0)
|
|
#define PORT_RXRD_FIFO 0x0028C
|
|
#define PORT_RXRD_FIFO_REQ GENMASK(6, 0)
|
|
#define PORT_OUTS_CPLS 0x00290
|
|
#define PORT_OUTS_CPLS_SHRD GENMASK(14, 8)
|
|
#define PORT_OUTS_CPLS_WAIT GENMASK(6, 0)
|
|
#define PORT_APPCLK 0x00800
|
|
#define PORT_APPCLK_EN BIT(0)
|
|
#define PORT_APPCLK_CGDIS BIT(8)
|
|
#define PORT_STATUS 0x00804
|
|
#define PORT_STATUS_READY BIT(0)
|
|
#define PORT_REFCLK 0x00810
|
|
#define PORT_REFCLK_EN BIT(0)
|
|
#define PORT_REFCLK_CGDIS BIT(8)
|
|
#define PORT_PERST 0x00814
|
|
#define PORT_PERST_OFF BIT(0)
|
|
#define PORT_RID2SID(i16) (0x00828 + 4 * (i16))
|
|
#define PORT_RID2SID_VALID BIT(31)
|
|
#define PORT_RID2SID_SID_SHIFT 16
|
|
#define PORT_RID2SID_BUS_SHIFT 8
|
|
#define PORT_RID2SID_DEV_SHIFT 3
|
|
#define PORT_RID2SID_FUNC_SHIFT 0
|
|
#define PORT_OUTS_PREQS_HDR 0x00980
|
|
#define PORT_OUTS_PREQS_HDR_MASK GENMASK(9, 0)
|
|
#define PORT_OUTS_PREQS_DATA 0x00984
|
|
#define PORT_OUTS_PREQS_DATA_MASK GENMASK(15, 0)
|
|
#define PORT_TUNCTRL 0x00988
|
|
#define PORT_TUNCTRL_PERST_ON BIT(0)
|
|
#define PORT_TUNCTRL_PERST_ACK_REQ BIT(1)
|
|
#define PORT_TUNSTAT 0x0098c
|
|
#define PORT_TUNSTAT_PERST_ON BIT(0)
|
|
#define PORT_TUNSTAT_PERST_ACK_PEND BIT(1)
|
|
#define PORT_PREFMEM_ENABLE 0x00994
|
|
|
|
struct reg_info {
|
|
u32 phy_lane_ctl;
|
|
u32 port_refclk;
|
|
u32 port_perst;
|
|
};
|
|
|
|
const struct reg_info t8103_hw = {
|
|
.phy_lane_ctl = PHY_LANE_CTL,
|
|
.port_refclk = PORT_REFCLK,
|
|
.port_perst = PORT_PERST,
|
|
};
|
|
|
|
#define PORT_T602X_PERST 0x082c
|
|
|
|
const struct reg_info t602x_hw = {
|
|
.phy_lane_ctl = 0,
|
|
.port_refclk = 0,
|
|
.port_perst = PORT_T602X_PERST,
|
|
};
|
|
|
|
struct apple_pcie_priv {
|
|
struct udevice *dev;
|
|
void __iomem *base;
|
|
void __iomem *cfg_base;
|
|
struct list_head ports;
|
|
const struct reg_info *hw;
|
|
};
|
|
|
|
struct apple_pcie_port {
|
|
struct apple_pcie_priv *pcie;
|
|
struct gpio_desc reset;
|
|
ofnode np;
|
|
void __iomem *base;
|
|
void __iomem *phy;
|
|
struct list_head entry;
|
|
int idx;
|
|
};
|
|
|
|
static void rmw_set(u32 set, void __iomem *addr)
|
|
{
|
|
writel_relaxed(readl_relaxed(addr) | set, addr);
|
|
}
|
|
|
|
static void rmw_clear(u32 clr, void __iomem *addr)
|
|
{
|
|
writel_relaxed(readl_relaxed(addr) & ~clr, addr);
|
|
}
|
|
|
|
static int apple_pcie_config_address(const struct udevice *bus,
|
|
pci_dev_t bdf, uint offset,
|
|
void **paddress)
|
|
{
|
|
struct apple_pcie_priv *pcie = dev_get_priv(bus);
|
|
void *addr;
|
|
|
|
addr = pcie->cfg_base;
|
|
addr += PCIE_ECAM_OFFSET(PCI_BUS(bdf), PCI_DEV(bdf),
|
|
PCI_FUNC(bdf), offset);
|
|
*paddress = addr;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int apple_pcie_read_config(const struct udevice *bus, pci_dev_t bdf,
|
|
uint offset, ulong *valuep,
|
|
enum pci_size_t size)
|
|
{
|
|
int ret;
|
|
|
|
ret = pci_generic_mmap_read_config(bus, apple_pcie_config_address,
|
|
bdf, offset, valuep, size);
|
|
return ret;
|
|
}
|
|
|
|
static int apple_pcie_write_config(struct udevice *bus, pci_dev_t bdf,
|
|
uint offset, ulong value,
|
|
enum pci_size_t size)
|
|
{
|
|
return pci_generic_mmap_write_config(bus, apple_pcie_config_address,
|
|
bdf, offset, value, size);
|
|
}
|
|
|
|
static const struct dm_pci_ops apple_pcie_ops = {
|
|
.read_config = apple_pcie_read_config,
|
|
.write_config = apple_pcie_write_config,
|
|
};
|
|
|
|
static int apple_pcie_setup_refclk(struct apple_pcie_priv *pcie,
|
|
struct apple_pcie_port *port)
|
|
{
|
|
u32 stat;
|
|
int res;
|
|
|
|
if (pcie->hw->phy_lane_ctl)
|
|
rmw_set(PHY_LANE_CTL_CFGACC, port->phy + pcie->hw->phy_lane_ctl);
|
|
|
|
rmw_set(PHY_LANE_CFG_REFCLK0REQ, port->phy + PHY_LANE_CFG);
|
|
|
|
res = readl_poll_sleep_timeout(port->phy + PHY_LANE_CFG,
|
|
stat, stat & PHY_LANE_CFG_REFCLK0ACK,
|
|
100, 50000);
|
|
if (res < 0)
|
|
return res;
|
|
|
|
rmw_set(PHY_LANE_CFG_REFCLK1REQ, port->phy + PHY_LANE_CFG);
|
|
res = readl_poll_sleep_timeout(port->phy + PHY_LANE_CFG,
|
|
stat, stat & PHY_LANE_CFG_REFCLK1ACK,
|
|
100, 50000);
|
|
|
|
if (res < 0)
|
|
return res;
|
|
|
|
if (pcie->hw->phy_lane_ctl)
|
|
rmw_clear(PHY_LANE_CTL_CFGACC, port->phy + pcie->hw->phy_lane_ctl);
|
|
|
|
rmw_set(PHY_LANE_CFG_REFCLKEN, port->phy + PHY_LANE_CFG);
|
|
|
|
if (pcie->hw->port_refclk)
|
|
rmw_set(PORT_REFCLK_EN, port->base + pcie->hw->port_refclk);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int apple_pcie_setup_port(struct apple_pcie_priv *pcie, ofnode np)
|
|
{
|
|
struct apple_pcie_port *port;
|
|
struct gpio_desc reset;
|
|
fdt_addr_t addr;
|
|
u32 stat, idx;
|
|
int ret;
|
|
char name[16];
|
|
|
|
ret = gpio_request_by_name_nodev(np, "reset-gpios", 0, &reset, 0);
|
|
if (ret)
|
|
return ret;
|
|
|
|
port = devm_kzalloc(pcie->dev, sizeof(*port), GFP_KERNEL);
|
|
if (!port)
|
|
return -ENOMEM;
|
|
|
|
ret = ofnode_read_u32_index(np, "reg", 0, &idx);
|
|
if (ret)
|
|
return ret;
|
|
|
|
/* Use the first reg entry to work out the port index */
|
|
port->idx = idx >> 11;
|
|
port->pcie = pcie;
|
|
port->reset = reset;
|
|
port->np = np;
|
|
|
|
snprintf(name, sizeof(name), "port%d", port->idx);
|
|
addr = dev_read_addr_name(pcie->dev, name);
|
|
if (addr == FDT_ADDR_T_NONE)
|
|
addr = dev_read_addr_index(pcie->dev, port->idx + 2);
|
|
if (addr == FDT_ADDR_T_NONE)
|
|
return -EINVAL;
|
|
port->base = map_sysmem(addr, 0);
|
|
|
|
snprintf(name, sizeof(name), "phy%d", port->idx);
|
|
addr = dev_read_addr_name(pcie->dev, name);
|
|
if (addr == FDT_ADDR_T_NONE)
|
|
port->phy = pcie->base + CORE_PHY_DEFAULT_BASE(port->idx);
|
|
else
|
|
port->phy = map_sysmem(addr, 0);
|
|
|
|
rmw_set(PORT_APPCLK_EN, port->base + PORT_APPCLK);
|
|
|
|
/* Assert PERST# before setting up the clock */
|
|
dm_gpio_set_value(&reset, 1);
|
|
|
|
ret = apple_pcie_setup_refclk(pcie, port);
|
|
if (ret < 0)
|
|
return ret;
|
|
|
|
/* The minimal Tperst-clk value is 100us (PCIe CEM r5.0, 2.9.2) */
|
|
udelay(100);
|
|
|
|
/* Deassert PERST# */
|
|
rmw_set(PORT_PERST_OFF, port->base + pcie->hw->port_perst);
|
|
dm_gpio_set_value(&reset, 0);
|
|
|
|
/* Wait for 100ms after PERST# deassertion (PCIe r5.0, 6.6.1) */
|
|
udelay(100 * 1000);
|
|
|
|
ret = readl_poll_sleep_timeout(port->base + PORT_STATUS, stat,
|
|
stat & PORT_STATUS_READY, 100, 250000);
|
|
if (ret < 0) {
|
|
dev_err(pcie->dev, "port %d ready wait timeout\n", port->idx);
|
|
return ret;
|
|
}
|
|
|
|
list_add_tail(&port->entry, &pcie->ports);
|
|
|
|
writel_relaxed(PORT_LTSSMCTL_START, port->base + PORT_LTSSMCTL);
|
|
|
|
/*
|
|
* Deliberately ignore the link not coming up as connected
|
|
* devices (e.g. the WiFi controller) may not be powerd up.
|
|
*/
|
|
readl_poll_sleep_timeout(port->base + PORT_LINKSTS, stat,
|
|
(stat & PORT_LINKSTS_UP), 100, 100000);
|
|
|
|
if (pcie->hw->port_refclk)
|
|
rmw_clear(PORT_REFCLK_CGDIS, port->base + PORT_REFCLK);
|
|
else
|
|
rmw_set(PHY_LANE_CFG_REFCLKCGEN, port->phy + PHY_LANE_CFG);
|
|
rmw_clear(PORT_APPCLK_CGDIS, port->base + PORT_APPCLK);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int apple_pcie_probe(struct udevice *dev)
|
|
{
|
|
struct apple_pcie_priv *pcie = dev_get_priv(dev);
|
|
fdt_addr_t addr;
|
|
ofnode of_port;
|
|
int i, ret;
|
|
|
|
pcie->hw = (struct reg_info *)dev_get_driver_data(dev);
|
|
|
|
pcie->dev = dev;
|
|
addr = dev_read_addr_index(dev, 0);
|
|
if (addr == FDT_ADDR_T_NONE)
|
|
return -EINVAL;
|
|
pcie->cfg_base = map_sysmem(addr, 0);
|
|
|
|
addr = dev_read_addr_index(dev, 1);
|
|
if (addr == FDT_ADDR_T_NONE)
|
|
return -EINVAL;
|
|
pcie->base = map_sysmem(addr, 0);
|
|
|
|
INIT_LIST_HEAD(&pcie->ports);
|
|
|
|
for (of_port = ofnode_first_subnode(dev_ofnode(dev));
|
|
ofnode_valid(of_port);
|
|
of_port = ofnode_next_subnode(of_port)) {
|
|
if (!ofnode_is_enabled(of_port))
|
|
continue;
|
|
ret = apple_pcie_setup_port(pcie, of_port);
|
|
if (ret) {
|
|
dev_err(pcie->dev, "Port %d setup fail: %d\n", i, ret);
|
|
return ret;
|
|
}
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int apple_pcie_remove(struct udevice *dev)
|
|
{
|
|
struct apple_pcie_priv *pcie = dev_get_priv(dev);
|
|
struct apple_pcie_port *port, *tmp;
|
|
|
|
list_for_each_entry_safe(port, tmp, &pcie->ports, entry) {
|
|
gpio_free_list_nodev(&port->reset, 1);
|
|
free(port);
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static const struct udevice_id apple_pcie_of_match[] = {
|
|
{ .compatible = "apple,t6020-pcie", .data = (ulong)&t602x_hw },
|
|
{ .compatible = "apple,pcie", .data = (ulong)&t8103_hw },
|
|
{ /* sentinel */ }
|
|
};
|
|
|
|
U_BOOT_DRIVER(apple_pcie) = {
|
|
.name = "apple_pcie",
|
|
.id = UCLASS_PCI,
|
|
.of_match = apple_pcie_of_match,
|
|
.probe = apple_pcie_probe,
|
|
.remove = apple_pcie_remove,
|
|
.priv_auto = sizeof(struct apple_pcie_priv),
|
|
.ops = &apple_pcie_ops,
|
|
};
|