mirror of
https://github.com/AsahiLinux/u-boot
synced 2024-12-01 08:59:33 +00:00
1e94b46f73
This old patch was marked as deferred. Bring it back to life, to continue towards the removal of common.h Move this out of the common header and include it only where needed. Signed-off-by: Simon Glass <sjg@chromium.org>
467 lines
11 KiB
C
467 lines
11 KiB
C
// SPDX-License-Identifier: GPL-2.0
|
|
/*
|
|
* MediaTek High-speed UART driver
|
|
*
|
|
* Copyright (C) 2018 MediaTek Inc.
|
|
* Author: Weijie Gao <weijie.gao@mediatek.com>
|
|
*/
|
|
|
|
#include <clk.h>
|
|
#include <common.h>
|
|
#include <div64.h>
|
|
#include <dm.h>
|
|
#include <dm/device_compat.h>
|
|
#include <errno.h>
|
|
#include <log.h>
|
|
#include <serial.h>
|
|
#include <watchdog.h>
|
|
#include <asm/global_data.h>
|
|
#include <asm/io.h>
|
|
#include <asm/types.h>
|
|
#include <linux/err.h>
|
|
#include <linux/printk.h>
|
|
|
|
struct mtk_serial_regs {
|
|
u32 rbr;
|
|
u32 ier;
|
|
u32 fcr;
|
|
u32 lcr;
|
|
u32 mcr;
|
|
u32 lsr;
|
|
u32 msr;
|
|
u32 spr;
|
|
u32 mdr1;
|
|
u32 highspeed;
|
|
u32 sample_count;
|
|
u32 sample_point;
|
|
u32 fracdiv_l;
|
|
u32 fracdiv_m;
|
|
u32 escape_en;
|
|
u32 guard;
|
|
u32 rx_sel;
|
|
};
|
|
|
|
#define thr rbr
|
|
#define iir fcr
|
|
#define dll rbr
|
|
#define dlm ier
|
|
|
|
#define UART_LCR_WLS_8 0x03 /* 8 bit character length */
|
|
#define UART_LCR_DLAB 0x80 /* Divisor latch access bit */
|
|
|
|
#define UART_LSR_DR 0x01 /* Data ready */
|
|
#define UART_LSR_THRE 0x20 /* Xmit holding register empty */
|
|
#define UART_LSR_TEMT 0x40 /* Xmitter empty */
|
|
|
|
#define UART_MCR_DTR 0x01 /* DTR */
|
|
#define UART_MCR_RTS 0x02 /* RTS */
|
|
|
|
#define UART_FCR_FIFO_EN 0x01 /* Fifo enable */
|
|
#define UART_FCR_RXSR 0x02 /* Receiver soft reset */
|
|
#define UART_FCR_TXSR 0x04 /* Transmitter soft reset */
|
|
|
|
#define UART_MCRVAL (UART_MCR_DTR | \
|
|
UART_MCR_RTS)
|
|
|
|
/* Clear & enable FIFOs */
|
|
#define UART_FCRVAL (UART_FCR_FIFO_EN | \
|
|
UART_FCR_RXSR | \
|
|
UART_FCR_TXSR)
|
|
|
|
/* the data is correct if the real baud is within 3%. */
|
|
#define BAUD_ALLOW_MAX(baud) ((baud) + (baud) * 3 / 100)
|
|
#define BAUD_ALLOW_MIX(baud) ((baud) - (baud) * 3 / 100)
|
|
|
|
/* struct mtk_serial_priv - Structure holding all information used by the
|
|
* driver
|
|
* @regs: Register base of the serial port
|
|
* @clk: The baud clock device
|
|
* @fixed_clk_rate: Fallback fixed baud clock rate if baud clock
|
|
* device is not specified
|
|
* @force_highspeed: Force using high-speed mode
|
|
*/
|
|
struct mtk_serial_priv {
|
|
struct mtk_serial_regs __iomem *regs;
|
|
struct clk clk;
|
|
u32 fixed_clk_rate;
|
|
bool force_highspeed;
|
|
};
|
|
|
|
static void _mtk_serial_setbrg(struct mtk_serial_priv *priv, int baud,
|
|
uint clk_rate)
|
|
{
|
|
u32 quot, realbaud, samplecount = 1;
|
|
|
|
/* Special case for low baud clock */
|
|
if (baud <= 115200 && clk_rate == 12000000) {
|
|
writel(3, &priv->regs->highspeed);
|
|
|
|
quot = DIV_ROUND_CLOSEST(clk_rate, 256 * baud);
|
|
if (quot == 0)
|
|
quot = 1;
|
|
|
|
samplecount = DIV_ROUND_CLOSEST(clk_rate, quot * baud);
|
|
|
|
realbaud = clk_rate / samplecount / quot;
|
|
if (realbaud > BAUD_ALLOW_MAX(baud) ||
|
|
realbaud < BAUD_ALLOW_MIX(baud)) {
|
|
pr_info("baud %d can't be handled\n", baud);
|
|
}
|
|
|
|
goto set_baud;
|
|
}
|
|
|
|
if (priv->force_highspeed)
|
|
goto use_hs3;
|
|
|
|
if (baud <= 115200) {
|
|
writel(0, &priv->regs->highspeed);
|
|
quot = DIV_ROUND_CLOSEST(clk_rate, 16 * baud);
|
|
} else if (baud <= 576000) {
|
|
writel(2, &priv->regs->highspeed);
|
|
|
|
/* Set to next lower baudrate supported */
|
|
if ((baud == 500000) || (baud == 576000))
|
|
baud = 460800;
|
|
|
|
quot = DIV_ROUND_UP(clk_rate, 4 * baud);
|
|
} else {
|
|
use_hs3:
|
|
writel(3, &priv->regs->highspeed);
|
|
|
|
quot = DIV_ROUND_UP(clk_rate, 256 * baud);
|
|
samplecount = DIV_ROUND_CLOSEST(clk_rate, quot * baud);
|
|
}
|
|
|
|
set_baud:
|
|
/* set divisor */
|
|
writel(UART_LCR_WLS_8 | UART_LCR_DLAB, &priv->regs->lcr);
|
|
writel(quot & 0xff, &priv->regs->dll);
|
|
writel((quot >> 8) & 0xff, &priv->regs->dlm);
|
|
writel(UART_LCR_WLS_8, &priv->regs->lcr);
|
|
|
|
/* set highspeed mode sample count & point */
|
|
writel(samplecount - 1, &priv->regs->sample_count);
|
|
writel((samplecount - 2) >> 1, &priv->regs->sample_point);
|
|
}
|
|
|
|
static int _mtk_serial_putc(struct mtk_serial_priv *priv, const char ch)
|
|
{
|
|
if (!(readl(&priv->regs->lsr) & UART_LSR_THRE))
|
|
return -EAGAIN;
|
|
|
|
writel(ch, &priv->regs->thr);
|
|
|
|
if (ch == '\n')
|
|
schedule();
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int _mtk_serial_getc(struct mtk_serial_priv *priv)
|
|
{
|
|
if (!(readl(&priv->regs->lsr) & UART_LSR_DR))
|
|
return -EAGAIN;
|
|
|
|
return readl(&priv->regs->rbr);
|
|
}
|
|
|
|
static int _mtk_serial_pending(struct mtk_serial_priv *priv, bool input)
|
|
{
|
|
if (input)
|
|
return (readl(&priv->regs->lsr) & UART_LSR_DR) ? 1 : 0;
|
|
else
|
|
return (readl(&priv->regs->lsr) & UART_LSR_THRE) ? 0 : 1;
|
|
}
|
|
|
|
#if CONFIG_IS_ENABLED(DM_SERIAL)
|
|
static int mtk_serial_setbrg(struct udevice *dev, int baudrate)
|
|
{
|
|
struct mtk_serial_priv *priv = dev_get_priv(dev);
|
|
u32 clk_rate;
|
|
|
|
clk_rate = clk_get_rate(&priv->clk);
|
|
if (IS_ERR_VALUE(clk_rate) || clk_rate == 0)
|
|
clk_rate = priv->fixed_clk_rate;
|
|
|
|
_mtk_serial_setbrg(priv, baudrate, clk_rate);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int mtk_serial_putc(struct udevice *dev, const char ch)
|
|
{
|
|
struct mtk_serial_priv *priv = dev_get_priv(dev);
|
|
|
|
return _mtk_serial_putc(priv, ch);
|
|
}
|
|
|
|
static int mtk_serial_getc(struct udevice *dev)
|
|
{
|
|
struct mtk_serial_priv *priv = dev_get_priv(dev);
|
|
|
|
return _mtk_serial_getc(priv);
|
|
}
|
|
|
|
static int mtk_serial_pending(struct udevice *dev, bool input)
|
|
{
|
|
struct mtk_serial_priv *priv = dev_get_priv(dev);
|
|
|
|
return _mtk_serial_pending(priv, input);
|
|
}
|
|
|
|
static int mtk_serial_probe(struct udevice *dev)
|
|
{
|
|
struct mtk_serial_priv *priv = dev_get_priv(dev);
|
|
|
|
/* Disable interrupt */
|
|
writel(0, &priv->regs->ier);
|
|
|
|
writel(UART_MCRVAL, &priv->regs->mcr);
|
|
writel(UART_FCRVAL, &priv->regs->fcr);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int mtk_serial_of_to_plat(struct udevice *dev)
|
|
{
|
|
struct mtk_serial_priv *priv = dev_get_priv(dev);
|
|
fdt_addr_t addr;
|
|
int err;
|
|
|
|
addr = dev_read_addr(dev);
|
|
if (addr == FDT_ADDR_T_NONE)
|
|
return -EINVAL;
|
|
|
|
priv->regs = map_physmem(addr, 0, MAP_NOCACHE);
|
|
|
|
err = clk_get_by_index(dev, 0, &priv->clk);
|
|
if (err) {
|
|
err = dev_read_u32(dev, "clock-frequency", &priv->fixed_clk_rate);
|
|
if (err) {
|
|
dev_err(dev, "baud clock not defined\n");
|
|
return -EINVAL;
|
|
}
|
|
} else {
|
|
err = clk_get_rate(&priv->clk);
|
|
if (IS_ERR_VALUE(err)) {
|
|
dev_err(dev, "invalid baud clock\n");
|
|
return -EINVAL;
|
|
}
|
|
}
|
|
|
|
priv->force_highspeed = dev_read_bool(dev, "mediatek,force-highspeed");
|
|
|
|
return 0;
|
|
}
|
|
|
|
static const struct dm_serial_ops mtk_serial_ops = {
|
|
.putc = mtk_serial_putc,
|
|
.pending = mtk_serial_pending,
|
|
.getc = mtk_serial_getc,
|
|
.setbrg = mtk_serial_setbrg,
|
|
};
|
|
|
|
static const struct udevice_id mtk_serial_ids[] = {
|
|
{ .compatible = "mediatek,hsuart" },
|
|
{ .compatible = "mediatek,mt6577-uart" },
|
|
{ }
|
|
};
|
|
|
|
U_BOOT_DRIVER(serial_mtk) = {
|
|
.name = "serial_mtk",
|
|
.id = UCLASS_SERIAL,
|
|
.of_match = mtk_serial_ids,
|
|
.of_to_plat = mtk_serial_of_to_plat,
|
|
.priv_auto = sizeof(struct mtk_serial_priv),
|
|
.probe = mtk_serial_probe,
|
|
.ops = &mtk_serial_ops,
|
|
.flags = DM_FLAG_PRE_RELOC,
|
|
};
|
|
#else
|
|
|
|
DECLARE_GLOBAL_DATA_PTR;
|
|
|
|
#define DECLARE_HSUART_PRIV(port) \
|
|
static struct mtk_serial_priv mtk_hsuart##port = { \
|
|
.regs = (struct mtk_serial_regs *)CFG_SYS_NS16550_COM##port, \
|
|
.fixed_clk_rate = CFG_SYS_NS16550_CLK \
|
|
};
|
|
|
|
#define DECLARE_HSUART_FUNCTIONS(port) \
|
|
static int mtk_serial##port##_init(void) \
|
|
{ \
|
|
writel(0, &mtk_hsuart##port.regs->ier); \
|
|
writel(UART_MCRVAL, &mtk_hsuart##port.regs->mcr); \
|
|
writel(UART_FCRVAL, &mtk_hsuart##port.regs->fcr); \
|
|
_mtk_serial_setbrg(&mtk_hsuart##port, gd->baudrate, \
|
|
mtk_hsuart##port.fixed_clk_rate); \
|
|
return 0 ; \
|
|
} \
|
|
static void mtk_serial##port##_setbrg(void) \
|
|
{ \
|
|
_mtk_serial_setbrg(&mtk_hsuart##port, gd->baudrate, \
|
|
mtk_hsuart##port.fixed_clk_rate); \
|
|
} \
|
|
static int mtk_serial##port##_getc(void) \
|
|
{ \
|
|
int err; \
|
|
do { \
|
|
err = _mtk_serial_getc(&mtk_hsuart##port); \
|
|
if (err == -EAGAIN) \
|
|
schedule(); \
|
|
} while (err == -EAGAIN); \
|
|
return err >= 0 ? err : 0; \
|
|
} \
|
|
static int mtk_serial##port##_tstc(void) \
|
|
{ \
|
|
return _mtk_serial_pending(&mtk_hsuart##port, true); \
|
|
} \
|
|
static void mtk_serial##port##_putc(const char c) \
|
|
{ \
|
|
int err; \
|
|
if (c == '\n') \
|
|
mtk_serial##port##_putc('\r'); \
|
|
do { \
|
|
err = _mtk_serial_putc(&mtk_hsuart##port, c); \
|
|
} while (err == -EAGAIN); \
|
|
} \
|
|
static void mtk_serial##port##_puts(const char *s) \
|
|
{ \
|
|
while (*s) { \
|
|
mtk_serial##port##_putc(*s++); \
|
|
} \
|
|
}
|
|
|
|
/* Serial device descriptor */
|
|
#define INIT_HSUART_STRUCTURE(port, __name) { \
|
|
.name = __name, \
|
|
.start = mtk_serial##port##_init, \
|
|
.stop = NULL, \
|
|
.setbrg = mtk_serial##port##_setbrg, \
|
|
.getc = mtk_serial##port##_getc, \
|
|
.tstc = mtk_serial##port##_tstc, \
|
|
.putc = mtk_serial##port##_putc, \
|
|
.puts = mtk_serial##port##_puts, \
|
|
}
|
|
|
|
#define DECLARE_HSUART(port, __name) \
|
|
DECLARE_HSUART_PRIV(port); \
|
|
DECLARE_HSUART_FUNCTIONS(port); \
|
|
struct serial_device mtk_hsuart##port##_device = \
|
|
INIT_HSUART_STRUCTURE(port, __name);
|
|
|
|
#if !defined(CONFIG_CONS_INDEX)
|
|
#elif (CONFIG_CONS_INDEX < 1) || (CONFIG_CONS_INDEX > 6)
|
|
#error "Invalid console index value."
|
|
#endif
|
|
|
|
#if CONFIG_CONS_INDEX == 1 && !defined(CFG_SYS_NS16550_COM1)
|
|
#error "Console port 1 defined but not configured."
|
|
#elif CONFIG_CONS_INDEX == 2 && !defined(CFG_SYS_NS16550_COM2)
|
|
#error "Console port 2 defined but not configured."
|
|
#elif CONFIG_CONS_INDEX == 3 && !defined(CFG_SYS_NS16550_COM3)
|
|
#error "Console port 3 defined but not configured."
|
|
#elif CONFIG_CONS_INDEX == 4 && !defined(CFG_SYS_NS16550_COM4)
|
|
#error "Console port 4 defined but not configured."
|
|
#elif CONFIG_CONS_INDEX == 5 && !defined(CFG_SYS_NS16550_COM5)
|
|
#error "Console port 5 defined but not configured."
|
|
#elif CONFIG_CONS_INDEX == 6 && !defined(CFG_SYS_NS16550_COM6)
|
|
#error "Console port 6 defined but not configured."
|
|
#endif
|
|
|
|
#if defined(CFG_SYS_NS16550_COM1)
|
|
DECLARE_HSUART(1, "mtk-hsuart0");
|
|
#endif
|
|
#if defined(CFG_SYS_NS16550_COM2)
|
|
DECLARE_HSUART(2, "mtk-hsuart1");
|
|
#endif
|
|
#if defined(CFG_SYS_NS16550_COM3)
|
|
DECLARE_HSUART(3, "mtk-hsuart2");
|
|
#endif
|
|
#if defined(CFG_SYS_NS16550_COM4)
|
|
DECLARE_HSUART(4, "mtk-hsuart3");
|
|
#endif
|
|
#if defined(CFG_SYS_NS16550_COM5)
|
|
DECLARE_HSUART(5, "mtk-hsuart4");
|
|
#endif
|
|
#if defined(CFG_SYS_NS16550_COM6)
|
|
DECLARE_HSUART(6, "mtk-hsuart5");
|
|
#endif
|
|
|
|
__weak struct serial_device *default_serial_console(void)
|
|
{
|
|
#if CONFIG_CONS_INDEX == 1
|
|
return &mtk_hsuart1_device;
|
|
#elif CONFIG_CONS_INDEX == 2
|
|
return &mtk_hsuart2_device;
|
|
#elif CONFIG_CONS_INDEX == 3
|
|
return &mtk_hsuart3_device;
|
|
#elif CONFIG_CONS_INDEX == 4
|
|
return &mtk_hsuart4_device;
|
|
#elif CONFIG_CONS_INDEX == 5
|
|
return &mtk_hsuart5_device;
|
|
#elif CONFIG_CONS_INDEX == 6
|
|
return &mtk_hsuart6_device;
|
|
#else
|
|
#error "Bad CONFIG_CONS_INDEX."
|
|
#endif
|
|
}
|
|
|
|
void mtk_serial_initialize(void)
|
|
{
|
|
#if defined(CFG_SYS_NS16550_COM1)
|
|
serial_register(&mtk_hsuart1_device);
|
|
#endif
|
|
#if defined(CFG_SYS_NS16550_COM2)
|
|
serial_register(&mtk_hsuart2_device);
|
|
#endif
|
|
#if defined(CFG_SYS_NS16550_COM3)
|
|
serial_register(&mtk_hsuart3_device);
|
|
#endif
|
|
#if defined(CFG_SYS_NS16550_COM4)
|
|
serial_register(&mtk_hsuart4_device);
|
|
#endif
|
|
#if defined(CFG_SYS_NS16550_COM5)
|
|
serial_register(&mtk_hsuart5_device);
|
|
#endif
|
|
#if defined(CFG_SYS_NS16550_COM6)
|
|
serial_register(&mtk_hsuart6_device);
|
|
#endif
|
|
}
|
|
|
|
#endif
|
|
|
|
#ifdef CONFIG_DEBUG_UART_MTK
|
|
|
|
#include <debug_uart.h>
|
|
|
|
static inline void _debug_uart_init(void)
|
|
{
|
|
struct mtk_serial_priv priv;
|
|
|
|
memset(&priv, 0, sizeof(struct mtk_serial_priv));
|
|
priv.regs = (void *) CONFIG_VAL(DEBUG_UART_BASE);
|
|
priv.fixed_clk_rate = CONFIG_DEBUG_UART_CLOCK;
|
|
|
|
writel(0, &priv.regs->ier);
|
|
writel(UART_MCRVAL, &priv.regs->mcr);
|
|
writel(UART_FCRVAL, &priv.regs->fcr);
|
|
|
|
_mtk_serial_setbrg(&priv, CONFIG_BAUDRATE, priv.fixed_clk_rate);
|
|
}
|
|
|
|
static inline void _debug_uart_putc(int ch)
|
|
{
|
|
struct mtk_serial_regs __iomem *regs =
|
|
(void *) CONFIG_VAL(DEBUG_UART_BASE);
|
|
|
|
while (!(readl(®s->lsr) & UART_LSR_THRE))
|
|
;
|
|
|
|
writel(ch, ®s->thr);
|
|
}
|
|
|
|
DEBUG_UART_FUNCS
|
|
|
|
#endif
|