u-boot/arch/arm/mach-zynq/cpu.c
Stefan Herbrechtsmeier 781745bd87 zynq: Move zynq to clock framework
Move the zynq to clock framework and remove unused functions as well as
the CONFIG_ZYNQ_PS_CLK_FREQ configuration.

Signed-off-by: Stefan Herbrechtsmeier <stefan.herbrechtsmeier@weidmueller.com>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2017-02-17 10:22:46 +01:00

62 lines
1.4 KiB
C

/*
* Copyright (C) 2012 Michal Simek <monstr@monstr.eu>
* Copyright (C) 2012 Xilinx, Inc. All rights reserved.
*
* SPDX-License-Identifier: GPL-2.0+
*/
#include <common.h>
#include <asm/io.h>
#include <asm/arch/clk.h>
#include <asm/arch/sys_proto.h>
#include <asm/arch/hardware.h>
#define ZYNQ_SILICON_VER_MASK 0xF0000000
#define ZYNQ_SILICON_VER_SHIFT 28
int arch_cpu_init(void)
{
zynq_slcr_unlock();
#ifndef CONFIG_SPL_BUILD
/* Device config APB, unlock the PCAP */
writel(0x757BDF0D, &devcfg_base->unlock);
writel(0xFFFFFFFF, &devcfg_base->rom_shadow);
#if (CONFIG_SYS_SDRAM_BASE == 0)
/* remap DDR to zero, FILTERSTART */
writel(0, &scu_base->filter_start);
/* OCM_CFG, Mask out the ROM, map ram into upper addresses */
writel(0x1F, &slcr_base->ocm_cfg);
/* FPGA_RST_CTRL, clear resets on AXI fabric ports */
writel(0x0, &slcr_base->fpga_rst_ctrl);
/* Set urgent bits with register */
writel(0x0, &slcr_base->ddr_urgent_sel);
/* Urgent write, ports S2/S3 */
writel(0xC, &slcr_base->ddr_urgent);
#endif
#endif
zynq_slcr_lock();
return 0;
}
unsigned int zynq_get_silicon_version(void)
{
return (readl(&devcfg_base->mctrl) & ZYNQ_SILICON_VER_MASK)
>> ZYNQ_SILICON_VER_SHIFT;
}
void reset_cpu(ulong addr)
{
zynq_slcr_cpu_reset();
while (1)
;
}
#ifndef CONFIG_SYS_DCACHE_OFF
void enable_caches(void)
{
/* Enable D-cache. I-cache is already enabled in start.S */
dcache_enable();
}
#endif