u-boot/include/cmd_confdefs.h
wdenk d791b1dc3e * Make sure Block Lock Bits get cleared in R360MPI flash driver
* MPC823 LCD driver: Fill color map backwards, to allow for steady
  display when Linux takes over

* Patch by Erwin Rol, 27 Feb 2003:
  Add support for RTEMS (this time for real).

* Add support for "bmp info" and "bmp display" commands to load
  bitmap images; this can be used (for example in a "preboot"
  command) to display a splash screen very quickly after poweron.

* Add support for 133 MHz clock on INCA-IP board
2003-04-20 14:04:18 +00:00

159 lines
5.5 KiB
C

/*
* (C) Copyright 2000-2002
* Wolfgang Denk, DENX Software Engineering, wd@denx.de.
*
* See file CREDITS for list of people who contributed to this
* project.
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License as
* published by the Free Software Foundation; either version 2 of
* the License, or (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston,
* MA 02111-1307 USA
*/
/*
* Definitions for Configuring the monitor commands
*/
#ifndef _CMD_CONFIG_H
#define _CMD_CONFIG_H
/*
* Configurable monitor commands
*/
#define CFG_CMD_BDI 0x00000001 /* bdinfo */
#define CFG_CMD_LOADS 0x00000002 /* loads */
#define CFG_CMD_LOADB 0x00000004 /* loadb */
#define CFG_CMD_IMI 0x00000008 /* iminfo */
#define CFG_CMD_CACHE 0x00000010 /* icache, dcache */
#define CFG_CMD_FLASH 0x00000020 /* flinfo, erase, protect */
#define CFG_CMD_MEMORY 0x00000040 /* md, mm, nm, mw, cp, cmp, */
/* crc, base, loop, mtest */
#define CFG_CMD_NET 0x00000080 /* bootp, tftpboot, rarpboot */
#define CFG_CMD_ENV 0x00000100 /* saveenv */
#define CFG_CMD_KGDB 0x00000200 /* kgdb */
#define CFG_CMD_PCMCIA 0x00000400 /* PCMCIA support */
#define CFG_CMD_IDE 0x00000800 /* IDE harddisk support */
#define CFG_CMD_PCI 0x00001000 /* pciinfo */
#define CFG_CMD_IRQ 0x00002000 /* irqinfo */
#define CFG_CMD_BOOTD 0x00004000 /* bootd */
#define CFG_CMD_CONSOLE 0x00008000 /* coninfo */
#define CFG_CMD_EEPROM 0x00010000 /* EEPROM read/write support */
#define CFG_CMD_ASKENV 0x00020000 /* ask for env variable */
#define CFG_CMD_RUN 0x00040000 /* run command in env variable */
#define CFG_CMD_ECHO 0x00080000 /* echo arguments */
#define CFG_CMD_I2C 0x00100000 /* I2C serial bus support */
#define CFG_CMD_REGINFO 0x00200000 /* Register dump */
#define CFG_CMD_IMMAP 0x00400000 /* IMMR dump support */
#define CFG_CMD_DATE 0x00800000 /* support for RTC, date/time...*/
#define CFG_CMD_DHCP 0x01000000 /* DHCP Support */
#define CFG_CMD_BEDBUG 0x02000000 /* Include BedBug Debugger */
#define CFG_CMD_FDC 0x04000000 /* Floppy Disk Support */
#define CFG_CMD_SCSI 0x08000000 /* SCSI Support */
#define CFG_CMD_AUTOSCRIPT 0x10000000 /* Autoscript Support */
#define CFG_CMD_MII 0x20000000 /* MII support */
#define CFG_CMD_SETGETDCR 0x40000000 /* DCR support on 4xx */
#define CFG_CMD_BSP 0x80000000 /* Board Specific functions */
#define CFG_CMD_ELF 0x0000000100000000 /* ELF (VxWorks) load/boot cmd */
#define CFG_CMD_MISC 0x0000000200000000 /* Misc functions like sleep etc*/
#define CFG_CMD_USB 0x0000000400000000 /* USB Support */
#define CFG_CMD_DOC 0x0000000800000000 /* Disk-On-Chip Support */
#define CFG_CMD_JFFS2 0x0000001000000000 /* JFFS2 Support */
#define CFG_CMD_DTT 0x0000002000000000 /* Digital Therm and Thermostat */
#define CFG_CMD_SDRAM 0x0000004000000000 /* SDRAM DIMM SPD info printout */
#define CFG_CMD_DIAG 0x0000008000000000 /* Diagnostics */
#define CFG_CMD_FPGA 0x0000010000000000 /* FPGA configuration Support */
#define CFG_CMD_HWFLOW 0x0000020000000000 /* RTS/CTS hw flow control */
#define CFG_CMD_SAVES 0x0000040000000000 /* save S record dump */
#define CFG_CMD_SPI 0x0000100000000000 /* SPI utility */
#define CFG_CMD_FDOS 0x0000200000000000 /* Floppy DOS support */
#define CFG_CMD_VFD 0x0000400000000000 /* VFD support (TRAB) */
#define CFG_CMD_NAND 0x0000800000000000 /* NAND support */
#define CFG_CMD_BMP 0x0001000000000000 /* BMP support */
#define CFG_CMD_ALL 0xFFFFFFFFFFFFFFFF /* ALL commands */
/* Commands that are considered "non-standard" for some reason
* (memory hogs, requires special hardware, not fully tested, etc.)
*/
#define CFG_CMD_NONSTD (CFG_CMD_ASKENV | \
CFG_CMD_BEDBUG | \
CFG_CMD_BMP | \
CFG_CMD_BSP | \
CFG_CMD_CACHE | \
CFG_CMD_DATE | \
CFG_CMD_DHCP | \
CFG_CMD_DIAG | \
CFG_CMD_DOC | \
CFG_CMD_DTT | \
CFG_CMD_ECHO | \
CFG_CMD_EEPROM | \
CFG_CMD_ELF | \
CFG_CMD_FDC | \
CFG_CMD_FDOS | \
CFG_CMD_HWFLOW | \
CFG_CMD_I2C | \
CFG_CMD_IDE | \
CFG_CMD_IMMAP | \
CFG_CMD_IRQ | \
CFG_CMD_JFFS2 | \
CFG_CMD_KGDB | \
CFG_CMD_MII | \
CFG_CMD_NAND | \
CFG_CMD_PCI | \
CFG_CMD_PCMCIA | \
CFG_CMD_REGINFO | \
CFG_CMD_SAVES | \
CFG_CMD_SCSI | \
CFG_CMD_SDRAM | \
CFG_CMD_SPI | \
CFG_CMD_USB | \
CFG_CMD_VFD )
/* Default configuration
*/
#define CONFIG_CMD_DFL (CFG_CMD_ALL & ~CFG_CMD_NONSTD)
#ifndef CONFIG_COMMANDS
#define CONFIG_COMMANDS CONFIG_CMD_DFL
#endif
/*
* optional BOOTP fields
*/
#define CONFIG_BOOTP_SUBNETMASK 0x00000001
#define CONFIG_BOOTP_GATEWAY 0x00000002
#define CONFIG_BOOTP_HOSTNAME 0x00000004
#define CONFIG_BOOTP_NISDOMAIN 0x00000008
#define CONFIG_BOOTP_BOOTPATH 0x00000010
#define CONFIG_BOOTP_BOOTFILESIZE 0x00000020
#define CONFIG_BOOTP_DNS 0x00000040
#define CONFIG_BOOTP_VENDOREX 0x80000000
#define CONFIG_BOOTP_ALL (~CONFIG_BOOTP_VENDOREX)
#define CONFIG_BOOTP_DEFAULT (CONFIG_BOOTP_SUBNETMASK | \
CONFIG_BOOTP_GATEWAY | \
CONFIG_BOOTP_HOSTNAME | \
CONFIG_BOOTP_BOOTPATH)
#ifndef CONFIG_BOOTP_MASK
#define CONFIG_BOOTP_MASK CONFIG_BOOTP_DEFAULT
#endif
#endif /* _CMD_CONFIG_H */