mirror of
https://github.com/AsahiLinux/u-boot
synced 2024-11-30 00:21:06 +00:00
1a4596601f
Signed-off-by: Wolfgang Denk <wd@denx.de> [trini: Fixup common/cmd_io.c] Signed-off-by: Tom Rini <trini@ti.com>
219 lines
6.8 KiB
C
219 lines
6.8 KiB
C
/*
|
|
* SPL driver for Diskonchip G4 nand flash
|
|
*
|
|
* Copyright (C) 2013 Mike Dunn <mikedunn@newsguy.com>
|
|
*
|
|
* SPDX-License-Identifier: GPL-2.0+
|
|
*
|
|
* This driver basically mimics the load functionality of a typical IPL (initial
|
|
* program loader) resident in the 2k NOR-like region of the docg4 that is
|
|
* mapped to the reset vector. It allows the u-boot SPL to continue loading if
|
|
* the IPL loads a fixed number of flash blocks that is insufficient to contain
|
|
* the entire u-boot image. In this case, a concatenated spl + u-boot image is
|
|
* written at the flash offset from which the IPL loads an image, and when the
|
|
* IPL jumps to the SPL, the SPL resumes loading where the IPL left off. See
|
|
* the palmtreo680 for an example.
|
|
*
|
|
* This driver assumes that the data was written to the flash using the device's
|
|
* "reliable" mode, and also assumes that each 512 byte page is stored
|
|
* redundantly in the subsequent page. This storage format is likely to be used
|
|
* by all boards that boot from the docg4. The format compensates for the lack
|
|
* of ecc in the IPL.
|
|
*
|
|
* Reliable mode reduces the capacity of a block by half, and the redundant
|
|
* pages reduce it by half again. As a result, the normal 256k capacity of a
|
|
* block is reduced to 64k for the purposes of the IPL/SPL.
|
|
*/
|
|
|
|
#include <asm/io.h>
|
|
#include <linux/mtd/docg4.h>
|
|
|
|
/* forward declarations */
|
|
static inline void write_nop(void __iomem *docptr);
|
|
static int poll_status(void __iomem *docptr);
|
|
static void write_addr(void __iomem *docptr, uint32_t docg4_addr);
|
|
static void address_sequence(unsigned int g4_page, unsigned int g4_index,
|
|
void __iomem *docptr);
|
|
static int docg4_load_block_reliable(uint32_t flash_offset, void *dest_addr);
|
|
|
|
int nand_spl_load_image(uint32_t offs, unsigned int size, void *dst)
|
|
{
|
|
void *load_addr = dst;
|
|
uint32_t flash_offset = offs;
|
|
const unsigned int block_count =
|
|
(size + DOCG4_BLOCK_CAPACITY_SPL - 1)
|
|
/ DOCG4_BLOCK_CAPACITY_SPL;
|
|
int i;
|
|
|
|
for (i = 0; i < block_count; i++) {
|
|
int ret = docg4_load_block_reliable(flash_offset, load_addr);
|
|
if (ret)
|
|
return ret;
|
|
load_addr += DOCG4_BLOCK_CAPACITY_SPL;
|
|
flash_offset += DOCG4_BLOCK_SIZE;
|
|
}
|
|
return 0;
|
|
}
|
|
|
|
static inline void write_nop(void __iomem *docptr)
|
|
{
|
|
writew(0, docptr + DOC_NOP);
|
|
}
|
|
|
|
static int poll_status(void __iomem *docptr)
|
|
{
|
|
/*
|
|
* Busy-wait for the FLASHREADY bit to be set in the FLASHCONTROL
|
|
* register. Operations known to take a long time (e.g., block erase)
|
|
* should sleep for a while before calling this.
|
|
*/
|
|
|
|
uint8_t flash_status;
|
|
|
|
/* hardware quirk requires reading twice initially */
|
|
flash_status = readb(docptr + DOC_FLASHCONTROL);
|
|
|
|
do {
|
|
flash_status = readb(docptr + DOC_FLASHCONTROL);
|
|
} while (!(flash_status & DOC_CTRL_FLASHREADY));
|
|
|
|
return 0;
|
|
}
|
|
|
|
static void write_addr(void __iomem *docptr, uint32_t docg4_addr)
|
|
{
|
|
/* write the four address bytes packed in docg4_addr to the device */
|
|
|
|
writeb(docg4_addr & 0xff, docptr + DOC_FLASHADDRESS);
|
|
docg4_addr >>= 8;
|
|
writeb(docg4_addr & 0xff, docptr + DOC_FLASHADDRESS);
|
|
docg4_addr >>= 8;
|
|
writeb(docg4_addr & 0xff, docptr + DOC_FLASHADDRESS);
|
|
docg4_addr >>= 8;
|
|
writeb(docg4_addr & 0xff, docptr + DOC_FLASHADDRESS);
|
|
}
|
|
|
|
static void address_sequence(unsigned int g4_page, unsigned int g4_index,
|
|
void __iomem *docptr)
|
|
{
|
|
writew(DOCG4_SEQ_PAGE_READ, docptr + DOC_FLASHSEQUENCE);
|
|
writew(DOCG4_CMD_PAGE_READ, docptr + DOC_FLASHCOMMAND);
|
|
write_nop(docptr);
|
|
write_addr(docptr, ((uint32_t)g4_page << 16) | g4_index);
|
|
write_nop(docptr);
|
|
}
|
|
|
|
static int docg4_load_block_reliable(uint32_t flash_offset, void *dest_addr)
|
|
{
|
|
void __iomem *docptr = (void *)CONFIG_SYS_NAND_BASE;
|
|
unsigned int g4_page = flash_offset >> 11; /* 2k page */
|
|
const unsigned int last_g4_page = g4_page + 0x80; /* last in block */
|
|
int g4_index = 0;
|
|
uint16_t flash_status;
|
|
uint16_t *buf;
|
|
|
|
/* flash_offset must be aligned to the start of a block */
|
|
if (flash_offset & 0x3ffff)
|
|
return -1;
|
|
|
|
writew(DOC_SEQ_RESET, docptr + DOC_FLASHSEQUENCE);
|
|
writew(DOC_CMD_RESET, docptr + DOC_FLASHCOMMAND);
|
|
write_nop(docptr);
|
|
write_nop(docptr);
|
|
poll_status(docptr);
|
|
write_nop(docptr);
|
|
writew(0x45, docptr + DOC_FLASHSEQUENCE);
|
|
writew(0xa3, docptr + DOC_FLASHCOMMAND);
|
|
write_nop(docptr);
|
|
writew(0x22, docptr + DOC_FLASHCOMMAND);
|
|
write_nop(docptr);
|
|
|
|
/* read 1st 4 oob bytes of first subpage of block */
|
|
address_sequence(g4_page, 0x0100, docptr); /* index at oob */
|
|
write_nop(docptr);
|
|
flash_status = readw(docptr + DOC_FLASHCONTROL);
|
|
flash_status = readw(docptr + DOC_FLASHCONTROL);
|
|
if (flash_status & 0x06) /* sequence or protection errors */
|
|
return -1;
|
|
writew(DOCG4_CMD_READ2, docptr + DOC_FLASHCOMMAND);
|
|
write_nop(docptr);
|
|
write_nop(docptr);
|
|
poll_status(docptr);
|
|
writew(DOC_ECCCONF0_READ_MODE | 4, docptr + DOC_ECCCONF0);
|
|
write_nop(docptr);
|
|
write_nop(docptr);
|
|
write_nop(docptr);
|
|
write_nop(docptr);
|
|
write_nop(docptr);
|
|
|
|
/*
|
|
* Here we read the first four oob bytes of the first page of the block.
|
|
* The IPL on the palmtreo680 requires that this contain a 32 bit magic
|
|
* number, or the load aborts. We'll ignore it.
|
|
*/
|
|
readw(docptr + 0x103c); /* hw quirk; 1st read discarded */
|
|
readw(docptr + 0x103c); /* lower 16 bits of magic number */
|
|
readw(docptr + DOCG4_MYSTERY_REG); /* upper 16 bits of magic number */
|
|
writew(0, docptr + DOC_DATAEND);
|
|
write_nop(docptr);
|
|
write_nop(docptr);
|
|
|
|
/* load contents of block to memory */
|
|
buf = (uint16_t *)dest_addr;
|
|
do {
|
|
int i;
|
|
|
|
address_sequence(g4_page, g4_index, docptr);
|
|
writew(DOCG4_CMD_READ2,
|
|
docptr + DOC_FLASHCOMMAND);
|
|
write_nop(docptr);
|
|
write_nop(docptr);
|
|
poll_status(docptr);
|
|
writew(DOC_ECCCONF0_READ_MODE |
|
|
DOC_ECCCONF0_ECC_ENABLE |
|
|
DOCG4_BCH_SIZE,
|
|
docptr + DOC_ECCCONF0);
|
|
write_nop(docptr);
|
|
write_nop(docptr);
|
|
write_nop(docptr);
|
|
write_nop(docptr);
|
|
write_nop(docptr);
|
|
|
|
/* read the 512 bytes of page data, 2 bytes at a time */
|
|
readw(docptr + 0x103c); /* hw quirk */
|
|
for (i = 0; i < 256; i++)
|
|
*buf++ = readw(docptr + 0x103c);
|
|
|
|
/* read oob, but discard it */
|
|
for (i = 0; i < 7; i++)
|
|
readw(docptr + 0x103c);
|
|
readw(docptr + DOCG4_OOB_6_7);
|
|
readw(docptr + DOCG4_OOB_6_7);
|
|
|
|
writew(0, docptr + DOC_DATAEND);
|
|
write_nop(docptr);
|
|
write_nop(docptr);
|
|
|
|
if (!(g4_index & 0x100)) {
|
|
/* not redundant subpage read; check for ecc error */
|
|
write_nop(docptr);
|
|
flash_status = readw(docptr + DOC_ECCCONF1);
|
|
flash_status = readw(docptr + DOC_ECCCONF1);
|
|
if (flash_status & 0x80) { /* ecc error */
|
|
g4_index += 0x108; /* read redundant subpage */
|
|
buf -= 256; /* back up ram ptr */
|
|
continue;
|
|
} else /* no ecc error */
|
|
g4_index += 0x210; /* skip redundant subpage */
|
|
} else /* redundant page was just read; skip ecc error check */
|
|
g4_index += 0x108;
|
|
|
|
if (g4_index == 0x420) { /* finished with 2k page */
|
|
g4_index = 0;
|
|
g4_page += 2; /* odd-numbered 2k pages skipped */
|
|
}
|
|
|
|
} while (g4_page != last_g4_page); /* while still on same block */
|
|
|
|
return 0;
|
|
}
|