u-boot/board/ids/ids8313/ids8313.c
Tom Rini 83d290c56f SPDX: Convert all of our single license tags to Linux Kernel style
When U-Boot started using SPDX tags we were among the early adopters and
there weren't a lot of other examples to borrow from.  So we picked the
area of the file that usually had a full license text and replaced it
with an appropriate SPDX-License-Identifier: entry.  Since then, the
Linux Kernel has adopted SPDX tags and they place it as the very first
line in a file (except where shebangs are used, then it's second line)
and with slightly different comment styles than us.

In part due to community overlap, in part due to better tag visibility
and in part for other minor reasons, switch over to that style.

This commit changes all instances where we have a single declared
license in the tag as both the before and after are identical in tag
contents.  There's also a few places where I found we did not have a tag
and have introduced one.

Signed-off-by: Tom Rini <trini@konsulko.com>
2018-05-07 09:34:12 -04:00

211 lines
5 KiB
C

// SPDX-License-Identifier: GPL-2.0+
/*
* (C) Copyright 2013
* Heiko Schocher, DENX Software Engineering, hs@denx.de.
*
* Based on:
* Copyright (c) 2011 IDS GmbH, Germany
* ids8313.c - ids8313 board support.
*
* Sergej Stepanov <ste@ids.de>
* Based on board/freescale/mpc8313erdb/mpc8313erdb.c
*/
#include <common.h>
#include <mpc83xx.h>
#include <spi.h>
#include <linux/libfdt.h>
DECLARE_GLOBAL_DATA_PTR;
/** CPLD contains the info about:
* - board type: *pCpld & 0xF0
* - hw-revision: *pCpld & 0x0F
* - cpld-revision: *pCpld+1
*/
int checkboard(void)
{
char *pcpld = (char *)CONFIG_SYS_CPLD_BASE;
u8 u8Vers = readb(pcpld);
u8 u8Revs = readb(pcpld + 1);
printf("Board: ");
switch (u8Vers & 0xF0) {
case '\x40':
printf("CU73X");
break;
case '\x50':
printf("CC73X");
break;
default:
printf("unknown(0x%02X, 0x%02X)\n", u8Vers, u8Revs);
return 0;
}
printf("\nInfo: HW-Rev: %i, CPLD-Rev: %i\n",
u8Vers & 0x0F, u8Revs & 0xFF);
return 0;
}
/*
* fixed sdram init
*/
int fixed_sdram(unsigned long config)
{
immap_t *im = (immap_t *)CONFIG_SYS_IMMR;
u32 msize = CONFIG_SYS_DDR_SIZE << 20;
#ifndef CONFIG_SYS_RAMBOOT
u32 msize_log2 = __ilog2(msize);
out_be32(&im->sysconf.ddrlaw[0].bar,
(CONFIG_SYS_DDR_SDRAM_BASE & 0xfffff000));
out_be32(&im->sysconf.ddrlaw[0].ar, LBLAWAR_EN | (msize_log2 - 1));
out_be32(&im->sysconf.ddrcdr, CONFIG_SYS_DDRCDR_VALUE);
sync();
/*
* Erratum DDR3 requires a 50ms delay after clearing DDRCDR[DDR_cfg],
* or the DDR2 controller may fail to initialize correctly.
*/
udelay(50000);
out_be32(&im->ddr.csbnds[0].csbnds, (msize - 1) >> 24);
out_be32(&im->ddr.cs_config[0], config);
/* currently we use only one CS, so disable the other banks */
out_be32(&im->ddr.cs_config[1], 0);
out_be32(&im->ddr.cs_config[2], 0);
out_be32(&im->ddr.cs_config[3], 0);
out_be32(&im->ddr.timing_cfg_3, CONFIG_SYS_DDR_TIMING_3);
out_be32(&im->ddr.timing_cfg_1, CONFIG_SYS_DDR_TIMING_1);
out_be32(&im->ddr.timing_cfg_2, CONFIG_SYS_DDR_TIMING_2);
out_be32(&im->ddr.timing_cfg_0, CONFIG_SYS_DDR_TIMING_0);
out_be32(&im->ddr.sdram_cfg, CONFIG_SYS_SDRAM_CFG);
out_be32(&im->ddr.sdram_cfg2, CONFIG_SYS_SDRAM_CFG2);
out_be32(&im->ddr.sdram_mode, CONFIG_SYS_DDR_MODE);
out_be32(&im->ddr.sdram_mode2, CONFIG_SYS_DDR_MODE_2);
out_be32(&im->ddr.sdram_interval, CONFIG_SYS_DDR_INTERVAL);
out_be32(&im->ddr.sdram_clk_cntl, CONFIG_SYS_DDR_CLK_CNTL);
sync();
udelay(300);
/* enable DDR controller */
setbits_be32(&im->ddr.sdram_cfg, SDRAM_CFG_MEM_EN);
/* now check the real size */
disable_addr_trans();
msize = get_ram_size(CONFIG_SYS_DDR_BASE, msize);
enable_addr_trans();
#endif
return msize;
}
static int setup_sdram(void)
{
u32 msize = CONFIG_SYS_DDR_SIZE << 20;
long int size_01, size_02;
size_01 = fixed_sdram(CONFIG_SYS_DDR_CONFIG);
size_02 = fixed_sdram(CONFIG_SYS_DDR_CONFIG_256);
if (size_01 > size_02)
msize = fixed_sdram(CONFIG_SYS_DDR_CONFIG);
else
msize = size_02;
return msize;
}
int dram_init(void)
{
immap_t *im = (immap_t *)CONFIG_SYS_IMMR;
fsl_lbc_t *lbc = &im->im_lbc;
u32 msize = 0;
if ((in_be32(&im->sysconf.immrbar) & IMMRBAR_BASE_ADDR) != (u32)im)
return -ENXIO;
msize = setup_sdram();
out_be32(&lbc->lbcr, CONFIG_SYS_LBC_LBCR);
out_be32(&lbc->mrtpr, CONFIG_SYS_LBC_MRTPR);
sync();
gd->ram_size = msize;
return 0;
}
#if defined(CONFIG_OF_BOARD_SETUP)
int ft_board_setup(void *blob, bd_t *bd)
{
ft_cpu_setup(blob, bd);
return 0;
}
#endif
/* gpio mask for spi_cs */
#define IDSCPLD_SPI_CS_MASK 0x00000001
/* spi_cs multiplexed through cpld */
#define IDSCPLD_SPI_CS_BASE (CONFIG_SYS_CPLD_BASE + 0xf)
#if defined(CONFIG_MISC_INIT_R)
/* srp umcr mask for rts */
#define IDSUMCR_RTS_MASK 0x04
int misc_init_r(void)
{
/*srp*/
duart83xx_t *uart1 = &((immap_t *)CONFIG_SYS_IMMR)->duart[0];
duart83xx_t *uart2 = &((immap_t *)CONFIG_SYS_IMMR)->duart[1];
gpio83xx_t *iopd = &((immap_t *)CONFIG_SYS_IMMR)->gpio[0];
u8 *spi_base = (u8 *)IDSCPLD_SPI_CS_BASE;
/* deactivate spi_cs channels */
out_8(spi_base, 0);
/* deactivate the spi_cs */
setbits_be32(&iopd->dir, IDSCPLD_SPI_CS_MASK);
/*srp - deactivate rts*/
out_8(&uart1->umcr, IDSUMCR_RTS_MASK);
out_8(&uart2->umcr, IDSUMCR_RTS_MASK);
gd->fdt_blob = (void *)CONFIG_SYS_FLASH_BASE;
return 0;
}
#endif
#ifdef CONFIG_MPC8XXX_SPI
/*
* The following are used to control the SPI chip selects
*/
int spi_cs_is_valid(unsigned int bus, unsigned int cs)
{
return bus == 0 && ((cs >= 0) && (cs <= 2));
}
void spi_cs_activate(struct spi_slave *slave)
{
gpio83xx_t *iopd = &((immap_t *)CONFIG_SYS_IMMR)->gpio[0];
u8 *spi_base = (u8 *)IDSCPLD_SPI_CS_BASE;
/* select the spi_cs channel */
out_8(spi_base, 1 << slave->cs);
/* activate the spi_cs */
clrbits_be32(&iopd->dat, IDSCPLD_SPI_CS_MASK);
}
void spi_cs_deactivate(struct spi_slave *slave)
{
gpio83xx_t *iopd = &((immap_t *)CONFIG_SYS_IMMR)->gpio[0];
u8 *spi_base = (u8 *)IDSCPLD_SPI_CS_BASE;
/* select the spi_cs channel */
out_8(spi_base, 1 << slave->cs);
/* deactivate the spi_cs */
setbits_be32(&iopd->dat, IDSCPLD_SPI_CS_MASK);
}
#endif /* CONFIG_HARD_SPI */