u-boot/board/freescale/mpc837xerdb/pci.c
Tom Rini 83d290c56f SPDX: Convert all of our single license tags to Linux Kernel style
When U-Boot started using SPDX tags we were among the early adopters and
there weren't a lot of other examples to borrow from.  So we picked the
area of the file that usually had a full license text and replaced it
with an appropriate SPDX-License-Identifier: entry.  Since then, the
Linux Kernel has adopted SPDX tags and they place it as the very first
line in a file (except where shebangs are used, then it's second line)
and with slightly different comment styles than us.

In part due to community overlap, in part due to better tag visibility
and in part for other minor reasons, switch over to that style.

This commit changes all instances where we have a single declared
license in the tag as both the before and after are identical in tag
contents.  There's also a few places where I found we did not have a tag
and have introduced one.

Signed-off-by: Tom Rini <trini@konsulko.com>
2018-05-07 09:34:12 -04:00

107 lines
2.9 KiB
C

// SPDX-License-Identifier: GPL-2.0+
/*
* Copyright (C) 2006-2009 Freescale Semiconductor, Inc.
*/
#include <common.h>
#include <mpc83xx.h>
#include <pci.h>
#include <asm/io.h>
static struct pci_region pci_regions[] = {
{
bus_start: CONFIG_SYS_PCI_MEM_BASE,
phys_start: CONFIG_SYS_PCI_MEM_PHYS,
size: CONFIG_SYS_PCI_MEM_SIZE,
flags: PCI_REGION_MEM | PCI_REGION_PREFETCH
},
{
bus_start: CONFIG_SYS_PCI_MMIO_BASE,
phys_start: CONFIG_SYS_PCI_MMIO_PHYS,
size: CONFIG_SYS_PCI_MMIO_SIZE,
flags: PCI_REGION_MEM
},
{
bus_start: CONFIG_SYS_PCI_IO_BASE,
phys_start: CONFIG_SYS_PCI_IO_PHYS,
size: CONFIG_SYS_PCI_IO_SIZE,
flags: PCI_REGION_IO
}
};
static struct pci_region pcie_regions_0[] = {
{
.bus_start = CONFIG_SYS_PCIE1_MEM_BASE,
.phys_start = CONFIG_SYS_PCIE1_MEM_PHYS,
.size = CONFIG_SYS_PCIE1_MEM_SIZE,
.flags = PCI_REGION_MEM,
},
{
.bus_start = CONFIG_SYS_PCIE1_IO_BASE,
.phys_start = CONFIG_SYS_PCIE1_IO_PHYS,
.size = CONFIG_SYS_PCIE1_IO_SIZE,
.flags = PCI_REGION_IO,
},
};
static struct pci_region pcie_regions_1[] = {
{
.bus_start = CONFIG_SYS_PCIE2_MEM_BASE,
.phys_start = CONFIG_SYS_PCIE2_MEM_PHYS,
.size = CONFIG_SYS_PCIE2_MEM_SIZE,
.flags = PCI_REGION_MEM,
},
{
.bus_start = CONFIG_SYS_PCIE2_IO_BASE,
.phys_start = CONFIG_SYS_PCIE2_IO_PHYS,
.size = CONFIG_SYS_PCIE2_IO_SIZE,
.flags = PCI_REGION_IO,
},
};
void pci_init_board(void)
{
volatile immap_t *immr = (volatile immap_t *)CONFIG_SYS_IMMR;
volatile sysconf83xx_t *sysconf = &immr->sysconf;
volatile clk83xx_t *clk = (volatile clk83xx_t *)&immr->clk;
volatile law83xx_t *pci_law = immr->sysconf.pcilaw;
volatile law83xx_t *pcie_law = sysconf->pcielaw;
struct pci_region *reg[] = { pci_regions };
struct pci_region *pcie_reg[] = { pcie_regions_0, pcie_regions_1, };
u32 spridr = in_be32(&immr->sysconf.spridr);
/* Enable all 5 PCI_CLK_OUTPUTS */
clk->occr |= 0xf8000000;
udelay(2000);
/* Configure PCI Local Access Windows */
pci_law[0].bar = CONFIG_SYS_PCI_MEM_PHYS & LAWBAR_BAR;
pci_law[0].ar = LBLAWAR_EN | LBLAWAR_512MB;
pci_law[1].bar = CONFIG_SYS_PCI_IO_PHYS & LAWBAR_BAR;
pci_law[1].ar = LBLAWAR_EN | LBLAWAR_1MB;
mpc83xx_pci_init(1, reg);
/* There is no PEX in MPC8379 parts. */
if (PARTID_NO_E(spridr) == SPR_8379)
return;
/* Configure the clock for PCIE controller */
clrsetbits_be32(&clk->sccr, SCCR_PCIEXP1CM | SCCR_PCIEXP2CM,
SCCR_PCIEXP1CM_1 | SCCR_PCIEXP2CM_1);
/* Deassert the resets in the control register */
out_be32(&sysconf->pecr1, 0xE0008000);
out_be32(&sysconf->pecr2, 0xE0008000);
udelay(2000);
/* Configure PCI Express Local Access Windows */
out_be32(&pcie_law[0].bar, CONFIG_SYS_PCIE1_BASE & LAWBAR_BAR);
out_be32(&pcie_law[0].ar, LBLAWAR_EN | LBLAWAR_512MB);
out_be32(&pcie_law[1].bar, CONFIG_SYS_PCIE2_BASE & LAWBAR_BAR);
out_be32(&pcie_law[1].ar, LBLAWAR_EN | LBLAWAR_512MB);
mpc83xx_pcie_init(2, pcie_reg);
}