u-boot/drivers/ram/starfive/starfive_ddr.h
Yanhong Wang 60abbadfc0 ram: starfive: add ddr driver
Add driver for StarFive JH7110 to support ddr initialization in SPL.

Signed-off-by: Yanhong Wang <yanhong.wang@starfivetech.com>
Tested-by: Conor Dooley <conor.dooley@microchip.com>
2023-04-20 16:08:44 +08:00

65 lines
1.5 KiB
C

/* SPDX-License-Identifier: GPL-2.0+ */
/*
* Copyright (C) 2022 StarFive Technology Co., Ltd.
* Author: Yanhong Wang<yanhong.wang@starfivetech.com>
*/
#ifndef __STARFIVE_DDR_H__
#define __STARFIVE_DDR_H__
#define SEC_CTRL_ADDR 0x1000
#define PHY_BASE_ADDR 0x800
#define PHY_AC_BASE_ADDR 0x1000
#define DDR_BUS_MASK GENMASK(29, 24)
#define DDR_AXI_MASK BIT(31)
#define DDR_BUS_OFFSET 0xAC
#define DDR_AXI_OFFSET 0xB0
#define DDR_BUS_OSC_DIV2 0
#define DDR_BUS_PLL1_DIV2 1
#define DDR_BUS_PLL1_DIV4 2
#define DDR_BUS_PLL1_DIV8 3
#define DDR_AXI_DISABLE 0
#define DDR_AXI_ENABLE 1
#define OFFSET_SEL BIT(31)
#define REG2G BIT(30)
#define REG4G BIT(29)
#define REG8G BIT(28)
#define F_ADDSET BIT(2)
#define F_SET BIT(1)
#define F_CLRSET BIT(0)
#define REGALL (REG2G | REG4G | REG8G)
#define REGSETALL (F_SET | REGALL)
#define REGCLRSETALL (F_CLRSET | REGALL)
#define REGADDSETALL (F_ADDSET | REGALL)
struct ddr_reg_cfg {
u32 offset;
u32 mask;
u32 val;
u32 flag;
};
enum ddr_size_t {
DDR_SIZE_2G,
DDR_SIZE_4G,
DDR_SIZE_8G,
DDR_SIZE_16G,
};
void ddr_phy_train(u32 *phyreg);
void ddr_phy_util(u32 *phyreg);
void ddr_phy_start(u32 *phyreg, enum ddr_size_t size);
void ddrcsr_boot(u32 *csrreg, u32 *secreg, u32 *phyreg, enum ddr_size_t size);
#define DDR_REG_TRIGGER(addr, mask, value) \
out_le32((addr), (in_le32(addr) & (mask)) | (value))
#define DDR_REG_SET(type, val) \
clrsetbits_le32(JH7110_SYS_CRG + DDR_##type##_OFFSET, \
DDR_##type##_MASK, \
((val) << __ffs(DDR_##type##_MASK)) & DDR_##type##_MASK)
#endif /*__STARFIVE_DDR_H__*/