mirror of
https://github.com/AsahiLinux/u-boot
synced 2024-12-02 01:19:49 +00:00
03544c6640
The driver assumed that I2C1 and I2C2 were always enabled, and if they were not, then an asynchronous abort was (silently) raised, to be caught much later on in the Linux kernel. Fix this by making I2C1 and I2C2 optional just like I2C3 and I2C4 are. To make the change binary-invariant, declare I2C1 and I2C2 in every include/configs/ file which defines CONFIG_SYS_I2C_MXC. Also, while updating README about CONFIG_SYS_I2C_MXC_I2C1 and CONFIG_SYS_I2C_MXC_I2C2, add missing descriptions for I2C4 speed (CONFIG_SYS_MXC_I2C4_SPEED) and slave (CONFIG_SYS_MXC_I2C4_SLAVE) config options. Signed-off-by: Albert ARIBAUD (3ADEV) <albert.aribaud@3adev.fr>
359 lines
9.4 KiB
C
359 lines
9.4 KiB
C
/*
|
|
* DENX M53 configuration
|
|
* Copyright (C) 2012-2013 Marek Vasut <marex@denx.de>
|
|
*
|
|
* SPDX-License-Identifier: GPL-2.0+
|
|
*/
|
|
|
|
#ifndef __M53EVK_CONFIG_H__
|
|
#define __M53EVK_CONFIG_H__
|
|
|
|
#define CONFIG_MX53
|
|
#define CONFIG_SYS_GENERIC_BOARD
|
|
#define CONFIG_MXC_GPIO
|
|
|
|
#include <asm/arch/imx-regs.h>
|
|
|
|
#define CONFIG_DISPLAY_CPUINFO
|
|
#define CONFIG_BOARD_EARLY_INIT_F
|
|
#define CONFIG_REVISION_TAG
|
|
#define CONFIG_SYS_NO_FLASH
|
|
|
|
#define CONFIG_FIT
|
|
|
|
#define CONFIG_TIMESTAMP /* Print image info with timestamp */
|
|
|
|
/*
|
|
* U-Boot Commands
|
|
*/
|
|
#define CONFIG_DISPLAY_BOARDINFO
|
|
#define CONFIG_DOS_PARTITION
|
|
#define CONFIG_FAT_WRITE
|
|
|
|
#define CONFIG_CMD_ASKENV
|
|
#define CONFIG_CMD_BMP
|
|
#define CONFIG_CMD_DATE
|
|
#define CONFIG_CMD_DHCP
|
|
#define CONFIG_CMD_EXT4
|
|
#define CONFIG_CMD_EXT4_WRITE
|
|
#define CONFIG_CMD_FAT
|
|
#define CONFIG_CMD_FS_GENERIC
|
|
#define CONFIG_CMD_GREPENV
|
|
#define CONFIG_CMD_I2C
|
|
#define CONFIG_CMD_MII
|
|
#define CONFIG_CMD_MMC
|
|
#define CONFIG_CMD_NAND
|
|
#define CONFIG_CMD_PING
|
|
#define CONFIG_CMD_SATA
|
|
#define CONFIG_CMD_USB
|
|
#define CONFIG_VIDEO
|
|
|
|
|
|
/*
|
|
* Memory configurations
|
|
*/
|
|
#define CONFIG_NR_DRAM_BANKS 2
|
|
#define PHYS_SDRAM_1 CSD0_BASE_ADDR
|
|
#define PHYS_SDRAM_1_SIZE (gd->bd->bi_dram[0].size)
|
|
#define PHYS_SDRAM_2 CSD1_BASE_ADDR
|
|
#define PHYS_SDRAM_2_SIZE (gd->bd->bi_dram[1].size)
|
|
#define PHYS_SDRAM_SIZE (gd->ram_size)
|
|
#define CONFIG_SYS_MALLOC_LEN (10 * 1024 * 1024)
|
|
#define CONFIG_SYS_MEMTEST_START 0x70000000
|
|
#define CONFIG_SYS_MEMTEST_END 0x8ff00000
|
|
|
|
#define CONFIG_SYS_SDRAM_BASE (PHYS_SDRAM_1)
|
|
#define CONFIG_SYS_INIT_RAM_ADDR (IRAM_BASE_ADDR)
|
|
#define CONFIG_SYS_INIT_RAM_SIZE (IRAM_SIZE)
|
|
|
|
#define CONFIG_SYS_INIT_SP_OFFSET \
|
|
(CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
|
|
#define CONFIG_SYS_INIT_SP_ADDR \
|
|
(CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET)
|
|
|
|
#define CONFIG_SYS_TEXT_BASE 0x71000000
|
|
|
|
/*
|
|
* U-Boot general configurations
|
|
*/
|
|
#define CONFIG_SYS_LONGHELP
|
|
#define CONFIG_SYS_CBSIZE 1024 /* Console I/O buffer size */
|
|
#define CONFIG_SYS_PBSIZE \
|
|
(CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16)
|
|
/* Print buffer size */
|
|
#define CONFIG_SYS_MAXARGS 32 /* Max number of command args */
|
|
#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE
|
|
/* Boot argument buffer size */
|
|
#define CONFIG_VERSION_VARIABLE /* U-BOOT version */
|
|
#define CONFIG_AUTO_COMPLETE /* Command auto complete */
|
|
#define CONFIG_CMDLINE_EDITING /* Command history etc */
|
|
#define CONFIG_SYS_HUSH_PARSER
|
|
|
|
/*
|
|
* Serial Driver
|
|
*/
|
|
#define CONFIG_MXC_UART
|
|
#define CONFIG_MXC_UART_BASE UART2_BASE
|
|
#define CONFIG_CONS_INDEX 1
|
|
#define CONFIG_BAUDRATE 115200
|
|
|
|
/*
|
|
* MMC Driver
|
|
*/
|
|
#ifdef CONFIG_CMD_MMC
|
|
#define CONFIG_MMC
|
|
#define CONFIG_GENERIC_MMC
|
|
#define CONFIG_FSL_ESDHC
|
|
#define CONFIG_SYS_FSL_ESDHC_ADDR 0
|
|
#define CONFIG_SYS_FSL_ESDHC_NUM 1
|
|
#endif
|
|
|
|
/*
|
|
* NAND
|
|
*/
|
|
#define CONFIG_ENV_SIZE (16 * 1024)
|
|
#ifdef CONFIG_CMD_NAND
|
|
#define CONFIG_SYS_MAX_NAND_DEVICE 1
|
|
#define CONFIG_SYS_NAND_BASE NFC_BASE_ADDR_AXI
|
|
#define CONFIG_NAND_MXC
|
|
#define CONFIG_MXC_NAND_REGS_BASE NFC_BASE_ADDR_AXI
|
|
#define CONFIG_MXC_NAND_IP_REGS_BASE NFC_BASE_ADDR
|
|
#define CONFIG_SYS_NAND_LARGEPAGE
|
|
#define CONFIG_MXC_NAND_HWECC
|
|
#define CONFIG_SYS_NAND_USE_FLASH_BBT
|
|
|
|
/* Environment is in NAND */
|
|
#define CONFIG_ENV_IS_IN_NAND
|
|
#define CONFIG_ENV_SIZE_REDUND CONFIG_ENV_SIZE
|
|
#define CONFIG_ENV_SECT_SIZE (128 * 1024)
|
|
#define CONFIG_ENV_RANGE (4 * CONFIG_ENV_SECT_SIZE)
|
|
#define CONFIG_ENV_OFFSET (8 * CONFIG_ENV_SECT_SIZE) /* 1 MiB */
|
|
#define CONFIG_ENV_OFFSET_REDUND \
|
|
(CONFIG_ENV_OFFSET + CONFIG_ENV_RANGE)
|
|
|
|
#define CONFIG_CMD_UBI
|
|
#define CONFIG_CMD_UBIFS
|
|
#define CONFIG_CMD_MTDPARTS
|
|
#define CONFIG_RBTREE
|
|
#define CONFIG_LZO
|
|
#define CONFIG_MTD_DEVICE
|
|
#define CONFIG_MTD_PARTITIONS
|
|
#define MTDIDS_DEFAULT "nand0=mxc_nand"
|
|
#define MTDPARTS_DEFAULT \
|
|
"mtdparts=mxc_nand:" \
|
|
"1024k(u-boot)," \
|
|
"512k(env1)," \
|
|
"512k(env2)," \
|
|
"14m(boot)," \
|
|
"240m(data)," \
|
|
"-@2048k(UBI)"
|
|
#else
|
|
#define CONFIG_ENV_IS_NOWHERE
|
|
#endif
|
|
|
|
/*
|
|
* Ethernet on SOC (FEC)
|
|
*/
|
|
#ifdef CONFIG_CMD_NET
|
|
#define CONFIG_FEC_MXC
|
|
#define IMX_FEC_BASE FEC_BASE_ADDR
|
|
#define CONFIG_FEC_MXC_PHYADDR 0x0
|
|
#define CONFIG_MII
|
|
#define CONFIG_DISCOVER_PHY
|
|
#define CONFIG_FEC_XCV_TYPE RMII
|
|
#define CONFIG_PHYLIB
|
|
#define CONFIG_PHY_MICREL
|
|
#define CONFIG_ETHPRIME "FEC0"
|
|
#endif
|
|
|
|
/*
|
|
* I2C
|
|
*/
|
|
#ifdef CONFIG_CMD_I2C
|
|
#define CONFIG_SYS_I2C
|
|
#define CONFIG_SYS_I2C_MXC
|
|
#define CONFIG_SYS_I2C_MXC_I2C1 /* enable I2C bus 1 */
|
|
#define CONFIG_SYS_I2C_MXC_I2C2 /* enable I2C bus 2 */
|
|
#define CONFIG_SYS_I2C_MXC_I2C3 /* enable I2C bus 3 */
|
|
#define CONFIG_SYS_RTC_BUS_NUM 1 /* I2C2 */
|
|
#endif
|
|
|
|
/*
|
|
* RTC
|
|
*/
|
|
#ifdef CONFIG_CMD_DATE
|
|
#define CONFIG_RTC_M41T62
|
|
#define CONFIG_SYS_I2C_RTC_ADDR 0x68
|
|
#define CONFIG_SYS_M41T11_BASE_YEAR 2000
|
|
#endif
|
|
|
|
/*
|
|
* USB
|
|
*/
|
|
#ifdef CONFIG_CMD_USB
|
|
#define CONFIG_USB_EHCI
|
|
#define CONFIG_USB_EHCI_MX5
|
|
#define CONFIG_USB_STORAGE
|
|
#define CONFIG_USB_HOST_ETHER
|
|
#define CONFIG_USB_ETHER_ASIX
|
|
#define CONFIG_USB_ETHER_MCS7830
|
|
#define CONFIG_USB_ETHER_SMSC95XX
|
|
#define CONFIG_MXC_USB_PORT 1
|
|
#define CONFIG_MXC_USB_PORTSC (PORT_PTS_UTMI | PORT_PTS_PTW)
|
|
#define CONFIG_MXC_USB_FLAGS 0
|
|
#endif
|
|
|
|
/*
|
|
* SATA
|
|
*/
|
|
#ifdef CONFIG_CMD_SATA
|
|
#define CONFIG_DWC_AHSATA
|
|
#define CONFIG_SYS_SATA_MAX_DEVICE 1
|
|
#define CONFIG_DWC_AHSATA_PORT_ID 0
|
|
#define CONFIG_DWC_AHSATA_BASE_ADDR SATA_BASE_ADDR
|
|
#define CONFIG_LBA48
|
|
#define CONFIG_LIBATA
|
|
#endif
|
|
|
|
/*
|
|
* LCD
|
|
*/
|
|
#ifdef CONFIG_VIDEO
|
|
#define CONFIG_VIDEO_IPUV3
|
|
#define CONFIG_CFB_CONSOLE
|
|
#define CONFIG_VGA_AS_SINGLE_DEVICE
|
|
#define CONFIG_SYS_CONSOLE_IS_IN_ENV
|
|
#define CONFIG_VIDEO_BMP_RLE8
|
|
#define CONFIG_VIDEO_BMP_GZIP
|
|
#define CONFIG_SPLASH_SCREEN
|
|
#define CONFIG_SPLASHIMAGE_GUARD
|
|
#define CONFIG_SPLASH_SCREEN_ALIGN
|
|
#define CONFIG_BMP_16BPP
|
|
#define CONFIG_VIDEO_LOGO
|
|
#define CONFIG_SYS_VIDEO_LOGO_MAX_SIZE (2 << 20)
|
|
#define CONFIG_IPUV3_CLK 200000000
|
|
#endif
|
|
|
|
/*
|
|
* Boot Linux
|
|
*/
|
|
#define CONFIG_CMDLINE_TAG
|
|
#define CONFIG_INITRD_TAG
|
|
#define CONFIG_REVISION_TAG
|
|
#define CONFIG_SETUP_MEMORY_TAGS
|
|
#define CONFIG_BOOTDELAY 3
|
|
#define CONFIG_BOOTFILE "fitImage"
|
|
#define CONFIG_BOOTARGS "console=ttymxc1,115200"
|
|
#define CONFIG_LOADADDR 0x70800000
|
|
#define CONFIG_BOOTCOMMAND "run mmc_mmc"
|
|
#define CONFIG_SYS_LOAD_ADDR CONFIG_LOADADDR
|
|
#define CONFIG_OF_LIBFDT
|
|
|
|
/*
|
|
* NAND SPL
|
|
*/
|
|
#define CONFIG_SPL_FRAMEWORK
|
|
#define CONFIG_SPL_TARGET "u-boot-with-nand-spl.imx"
|
|
#define CONFIG_SPL_BOARD_INIT
|
|
#define CONFIG_SPL_TEXT_BASE 0x70008000
|
|
#define CONFIG_SPL_PAD_TO 0x8000
|
|
#define CONFIG_SPL_STACK 0x70004000
|
|
#define CONFIG_SPL_GPIO_SUPPORT
|
|
#define CONFIG_SPL_LIBCOMMON_SUPPORT
|
|
#define CONFIG_SPL_LIBGENERIC_SUPPORT
|
|
#define CONFIG_SPL_NAND_SUPPORT
|
|
#define CONFIG_SPL_SERIAL_SUPPORT
|
|
|
|
#define CONFIG_SYS_NAND_U_BOOT_OFFS CONFIG_SPL_PAD_TO
|
|
#define CONFIG_SYS_NAND_PAGE_SIZE 2048
|
|
#define CONFIG_SYS_NAND_OOBSIZE 64
|
|
#define CONFIG_SYS_NAND_PAGE_COUNT 64
|
|
#define CONFIG_SYS_NAND_SIZE (256 * 1024 * 1024)
|
|
#define CONFIG_SYS_NAND_BAD_BLOCK_POS 0
|
|
|
|
/*
|
|
* Extra Environments
|
|
*/
|
|
#define CONFIG_PREBOOT "run try_bootscript"
|
|
#define CONFIG_HOSTNAME m53evk
|
|
|
|
#define CONFIG_EXTRA_ENV_SETTINGS \
|
|
"consdev=ttymxc1\0" \
|
|
"baudrate=115200\0" \
|
|
"bootscript=boot.scr\0" \
|
|
"bootdev=/dev/mmcblk0p1\0" \
|
|
"rootdev=/dev/mmcblk0p2\0" \
|
|
"netdev=eth0\0" \
|
|
"rootpath=/opt/eldk-5.5/armv7a-hf/rootfs-qte-sdk\0" \
|
|
"kernel_addr_r=0x72000000\0" \
|
|
"addcons=" \
|
|
"setenv bootargs ${bootargs} " \
|
|
"console=${consdev},${baudrate}\0" \
|
|
"addip=" \
|
|
"setenv bootargs ${bootargs} " \
|
|
"ip=${ipaddr}:${serverip}:${gatewayip}:" \
|
|
"${netmask}:${hostname}:${netdev}:off\0" \
|
|
"addmisc=" \
|
|
"setenv bootargs ${bootargs} ${miscargs}\0" \
|
|
"adddfltmtd=" \
|
|
"if test \"x${mtdparts}\" == \"x\" ; then " \
|
|
"mtdparts default ; " \
|
|
"fi\0" \
|
|
"addmtd=" \
|
|
"run adddfltmtd ; " \
|
|
"setenv bootargs ${bootargs} ${mtdparts}\0" \
|
|
"addargs=run addcons addmtd addmisc\0" \
|
|
"mmcload=" \
|
|
"mmc rescan ; " \
|
|
"load mmc 0:1 ${kernel_addr_r} ${bootfile}\0" \
|
|
"ubiload=" \
|
|
"ubi part UBI ; ubifsmount ubi0:rootfs ; " \
|
|
"ubifsload ${kernel_addr_r} /boot/${bootfile}\0" \
|
|
"netload=" \
|
|
"tftp ${kernel_addr_r} ${hostname}/${bootfile}\0" \
|
|
"miscargs=nohlt panic=1\0" \
|
|
"mmcargs=setenv bootargs root=${rootdev} rw rootwait\0" \
|
|
"ubiargs=" \
|
|
"setenv bootargs ubi.mtd=5 " \
|
|
"root=ubi0:rootfs rootfstype=ubifs\0" \
|
|
"nfsargs=" \
|
|
"setenv bootargs root=/dev/nfs rw " \
|
|
"nfsroot=${serverip}:${rootpath},v3,tcp\0" \
|
|
"mmc_mmc=" \
|
|
"run mmcload mmcargs addargs ; " \
|
|
"bootm ${kernel_addr_r}\0" \
|
|
"mmc_ubi=" \
|
|
"run mmcload ubiargs addargs ; " \
|
|
"bootm ${kernel_addr_r}\0" \
|
|
"mmc_nfs=" \
|
|
"run mmcload nfsargs addip addargs ; " \
|
|
"bootm ${kernel_addr_r}\0" \
|
|
"ubi_mmc=" \
|
|
"run ubiload mmcargs addargs ; " \
|
|
"bootm ${kernel_addr_r}\0" \
|
|
"ubi_ubi=" \
|
|
"run ubiload ubiargs addargs ; " \
|
|
"bootm ${kernel_addr_r}\0" \
|
|
"ubi_nfs=" \
|
|
"run ubiload nfsargs addip addargs ; " \
|
|
"bootm ${kernel_addr_r}\0" \
|
|
"net_mmc=" \
|
|
"run netload mmcargs addargs ; " \
|
|
"bootm ${kernel_addr_r}\0" \
|
|
"net_ubi=" \
|
|
"run netload ubiargs addargs ; " \
|
|
"bootm ${kernel_addr_r}\0" \
|
|
"net_nfs=" \
|
|
"run netload nfsargs addip addargs ; " \
|
|
"bootm ${kernel_addr_r}\0" \
|
|
"try_bootscript=" \
|
|
"mmc rescan;" \
|
|
"if test -e mmc 0:1 ${bootscript} ; then " \
|
|
"if load mmc 0:1 ${kernel_addr_r} ${bootscript};" \
|
|
"then ; " \
|
|
"echo Running bootscript... ; " \
|
|
"source ${kernel_addr_r} ; " \
|
|
"fi ; " \
|
|
"fi\0"
|
|
|
|
#endif /* __M53EVK_CONFIG_H__ */
|