Mirrors/u-boot
2
0
Fork 0
mirror of https://github.com/AsahiLinux/u-boot synced 2024-12-21 02:33:07 +00:00
Code Issues Projects Releases Packages Wiki Activity
u-boot/arch/arm/mach-imx/mx6/soc.c
Simon Glass 20e442ab2d dm: Rename U_BOOT_DEVICE() to U_BOOT_DRVINFO() 
The current macro is a misnomer since it does not declare a device
directly. Instead, it declares driver_info record which U-Boot uses at
runtime to create a device.

The distinction seems somewhat minor most of the time, but is becomes
quite confusing when we actually want to declare a device, with
of-platdata. We are left trying to distinguish between a device which
isn't actually device, and a device that is (perhaps an 'instance'?)

It seems better to rename this macro to describe what it actually is. The
macros is not widely used, since boards should use devicetree to declare
devices.

Rename it to U_BOOT_DRVINFO(), which indicates clearly that this is
declaring a new driver_info record, not a device.

Signed-off-by: Simon Glass <sjg@chromium.org>
2021-01-05 12:26:35 -07:00

735 lines
18 KiB
C
Raw Blame History

// SPDX-License-Identifier: GPL-2.0+
/*
* (C) Copyright 2007
* Sascha Hauer, Pengutronix
*
* (C) Copyright 2009 Freescale Semiconductor, Inc.
*/
#include <common.h>
#include <init.h>
#include <linux/delay.h>
#include <linux/errno.h>
#include <asm/io.h>
#include <asm/arch/imx-regs.h>
#include <asm/arch/clock.h>
#include <asm/arch/sys_proto.h>
#include <asm/bootm.h>
#include <asm/mach-imx/boot_mode.h>
#include <asm/mach-imx/dma.h>
#include <asm/mach-imx/hab.h>
#include <stdbool.h>
#include <asm/arch/mxc_hdmi.h>
#include <asm/arch/crm_regs.h>
#include <dm.h>
#include <fsl_sec.h>
#include <imx_thermal.h>
#include <mmc.h>
#define has_err007805() \
(is_mx6sl() || is_mx6dl() || is_mx6solo() || is_mx6ull())
struct scu_regs {
u32 ctrl;
u32 config;
u32 status;
u32 invalidate;
u32 fpga_rev;
};
#if !defined(CONFIG_SPL_BUILD) && defined(CONFIG_IMX_THERMAL)
static const struct imx_thermal_plat imx6_thermal_plat = {
.regs = (void *)ANATOP_BASE_ADDR,
.fuse_bank = 1,
.fuse_word = 6,
};
U_BOOT_DRVINFO(imx6_thermal) = {
.name = "imx_thermal",
.plat = &imx6_thermal_plat,
};
#endif
#if defined(CONFIG_IMX_HAB)
struct imx_sec_config_fuse_t const imx_sec_config_fuse = {
.bank = 0,
.word = 6,
};
#endif
u32 get_nr_cpus(void)
{
struct scu_regs *scu = (struct scu_regs *)SCU_BASE_ADDR;
return readl(&scu->config) & 3;
}
u32 get_cpu_rev(void)
{
struct anatop_regs *anatop = (struct anatop_regs *)ANATOP_BASE_ADDR;
u32 reg = readl(&anatop->digprog_sololite);
u32 type = ((reg >> 16) & 0xff);
u32 major, cfg = 0;
if (type != MXC_CPU_MX6SL) {
reg = readl(&anatop->digprog);
struct scu_regs *scu = (struct scu_regs *)SCU_BASE_ADDR;
cfg = readl(&scu->config) & 3;
type = ((reg >> 16) & 0xff);
if (type == MXC_CPU_MX6DL) {
if (!cfg)
type = MXC_CPU_MX6SOLO;
}
if (type == MXC_CPU_MX6Q) {
if (cfg == 1)
type = MXC_CPU_MX6D;
}
if (type == MXC_CPU_MX6ULL) {
if (readl(SRC_BASE_ADDR + 0x1c) & (1 << 6))
type = MXC_CPU_MX6ULZ;
}
}
major = ((reg >> 8) & 0xff);
if ((major >= 1) &&
((type == MXC_CPU_MX6Q) || (type == MXC_CPU_MX6D))) {
major--;
type = MXC_CPU_MX6QP;
if (cfg == 1)
type = MXC_CPU_MX6DP;
}
reg &= 0xff; /* mx6 silicon revision */
/* For 6DQ, the value 0x00630005 is Silicon revision 1.3*/
if (((type == MXC_CPU_MX6Q) || (type == MXC_CPU_MX6D)) && (reg == 0x5))
reg = 0x3;
return (type << 12) | (reg + (0x10 * (major + 1)));
}
/*
* OCOTP_CFG3[17:16] (see Fusemap Description Table offset 0x440)
* defines a 2-bit SPEED_GRADING
*/
#define OCOTP_CFG3_SPEED_SHIFT 16
#define OCOTP_CFG3_SPEED_800MHZ 0
#define OCOTP_CFG3_SPEED_850MHZ 1
#define OCOTP_CFG3_SPEED_1GHZ 2
#define OCOTP_CFG3_SPEED_1P2GHZ 3
/*
* For i.MX6UL
*/
#define OCOTP_CFG3_SPEED_528MHZ 1
#define OCOTP_CFG3_SPEED_696MHZ 2
/*
* For i.MX6ULL
*/
#define OCOTP_CFG3_SPEED_792MHZ 2
#define OCOTP_CFG3_SPEED_900MHZ 3
u32 get_cpu_speed_grade_hz(void)
{
struct ocotp_regs *ocotp = (struct ocotp_regs *)OCOTP_BASE_ADDR;
struct fuse_bank *bank = &ocotp->bank[0];
struct fuse_bank0_regs *fuse =
(struct fuse_bank0_regs *)bank->fuse_regs;
uint32_t val;
val = readl(&fuse->cfg3);
val >>= OCOTP_CFG3_SPEED_SHIFT;
val &= 0x3;
if (is_mx6ul()) {
if (val == OCOTP_CFG3_SPEED_528MHZ)
return 528000000;
else if (val == OCOTP_CFG3_SPEED_696MHZ)
return 696000000;
else
return 0;
}
if (is_mx6ull()) {
if (val == OCOTP_CFG3_SPEED_528MHZ)
return 528000000;
else if (val == OCOTP_CFG3_SPEED_792MHZ)
return 792000000;
else if (val == OCOTP_CFG3_SPEED_900MHZ)
return 900000000;
else
return 0;
}
switch (val) {
/* Valid for IMX6DQ */
case OCOTP_CFG3_SPEED_1P2GHZ:
if (is_mx6dq() || is_mx6dqp())
return 1200000000;
/* Valid for IMX6SX/IMX6SDL/IMX6DQ */
case OCOTP_CFG3_SPEED_1GHZ:
return 996000000;
/* Valid for IMX6DQ */
case OCOTP_CFG3_SPEED_850MHZ:
if (is_mx6dq() || is_mx6dqp())
return 852000000;
/* Valid for IMX6SX/IMX6SDL/IMX6DQ */
case OCOTP_CFG3_SPEED_800MHZ:
return 792000000;
}
return 0;
}
/*
* OCOTP_MEM0[7:6] (see Fusemap Description Table offset 0x480)
* defines a 2-bit Temperature Grade
*
* return temperature grade and min/max temperature in Celsius
*/
#define OCOTP_MEM0_TEMP_SHIFT 6
u32 get_cpu_temp_grade(int *minc, int *maxc)
{
struct ocotp_regs *ocotp = (struct ocotp_regs *)OCOTP_BASE_ADDR;
struct fuse_bank *bank = &ocotp->bank[1];
struct fuse_bank1_regs *fuse =
(struct fuse_bank1_regs *)bank->fuse_regs;
uint32_t val;
val = readl(&fuse->mem0);
val >>= OCOTP_MEM0_TEMP_SHIFT;
val &= 0x3;
if (minc && maxc) {
if (val == TEMP_AUTOMOTIVE) {
*minc = -40;
*maxc = 125;
} else if (val == TEMP_INDUSTRIAL) {
*minc = -40;
*maxc = 105;
} else if (val == TEMP_EXTCOMMERCIAL) {
*minc = -20;
*maxc = 105;
} else {
*minc = 0;
*maxc = 95;
}
}
return val;
}
#ifdef CONFIG_REVISION_TAG
u32 __weak get_board_rev(void)
{
u32 cpurev = get_cpu_rev();
u32 type = ((cpurev >> 12) & 0xff);
if (type == MXC_CPU_MX6SOLO)
cpurev = (MXC_CPU_MX6DL) << 12 | (cpurev & 0xFFF);
if (type == MXC_CPU_MX6D)
cpurev = (MXC_CPU_MX6Q) << 12 | (cpurev & 0xFFF);
return cpurev;
}
#endif
static void clear_ldo_ramp(void)
{
struct anatop_regs *anatop = (struct anatop_regs *)ANATOP_BASE_ADDR;
int reg;
/* ROM may modify LDO ramp up time according to fuse setting, so in
* order to be in the safe side we neeed to reset these settings to
* match the reset value: 0'b00
*/
reg = readl(&anatop->ana_misc2);
reg &= ~(0x3f << 24);
writel(reg, &anatop->ana_misc2);
}
/*
* Set the PMU_REG_CORE register
*
* Set LDO_SOC/PU/ARM regulators to the specified millivolt level.
* Possible values are from 0.725V to 1.450V in steps of
* 0.025V (25mV).
*/
int set_ldo_voltage(enum ldo_reg ldo, u32 mv)
{
struct anatop_regs *anatop = (struct anatop_regs *)ANATOP_BASE_ADDR;
u32 val, step, old, reg = readl(&anatop->reg_core);
u8 shift;
/* No LDO_SOC/PU/ARM */
if (is_mx6sll())
return 0;
if (mv < 725)
val = 0x00; /* Power gated off */
else if (mv > 1450)
val = 0x1F; /* Power FET switched full on. No regulation */
else
val = (mv - 700) / 25;
clear_ldo_ramp();
switch (ldo) {
case LDO_SOC:
shift = 18;
break;
case LDO_PU:
shift = 9;
break;
case LDO_ARM:
shift = 0;
break;
default:
return -EINVAL;
}
old = (reg & (0x1F << shift)) >> shift;
step = abs(val - old);
if (step == 0)
return 0;
reg = (reg & ~(0x1F << shift)) | (val << shift);
writel(reg, &anatop->reg_core);
/*
* The LDO ramp-up is based on 64 clock cycles of 24 MHz = 2.6 us per
* step
*/
udelay(3 * step);
return 0;
}
static void set_ahb_rate(u32 val)
{
struct mxc_ccm_reg *mxc_ccm = (struct mxc_ccm_reg *)CCM_BASE_ADDR;
u32 reg, div;
div = get_periph_clk() / val - 1;
reg = readl(&mxc_ccm->cbcdr);
writel((reg & (~MXC_CCM_CBCDR_AHB_PODF_MASK)) |
(div << MXC_CCM_CBCDR_AHB_PODF_OFFSET), &mxc_ccm->cbcdr);
}
static void clear_mmdc_ch_mask(void)
{
struct mxc_ccm_reg *mxc_ccm = (struct mxc_ccm_reg *)CCM_BASE_ADDR;
u32 reg;
reg = readl(&mxc_ccm->ccdr);
/* Clear MMDC channel mask */
if (is_mx6sx() || is_mx6ul() || is_mx6ull() || is_mx6sl() || is_mx6sll())
reg &= ~(MXC_CCM_CCDR_MMDC_CH1_HS_MASK);
else
reg &= ~(MXC_CCM_CCDR_MMDC_CH1_HS_MASK | MXC_CCM_CCDR_MMDC_CH0_HS_MASK);
writel(reg, &mxc_ccm->ccdr);
}
#define OCOTP_MEM0_REFTOP_TRIM_SHIFT 8
static void init_bandgap(void)
{
struct anatop_regs *anatop = (struct anatop_regs *)ANATOP_BASE_ADDR;
struct ocotp_regs *ocotp = (struct ocotp_regs *)OCOTP_BASE_ADDR;
struct fuse_bank *bank = &ocotp->bank[1];
struct fuse_bank1_regs *fuse =
(struct fuse_bank1_regs *)bank->fuse_regs;
uint32_t val;
/*
* Ensure the bandgap has stabilized.
*/
while (!(readl(&anatop->ana_misc0) & 0x80))
;
/*
* For best noise performance of the analog blocks using the
* outputs of the bandgap, the reftop_selfbiasoff bit should
* be set.
*/
writel(BM_ANADIG_ANA_MISC0_REFTOP_SELBIASOFF, &anatop->ana_misc0_set);
/*
* On i.MX6ULL,we need to set VBGADJ bits according to the
* REFTOP_TRIM[3:0] in fuse table
* 000 - set REFTOP_VBGADJ[2:0] to 3b'110,
* 110 - set REFTOP_VBGADJ[2:0] to 3b'000,
* 001 - set REFTOP_VBGADJ[2:0] to 3b'001,
* 010 - set REFTOP_VBGADJ[2:0] to 3b'010,
* 011 - set REFTOP_VBGADJ[2:0] to 3b'011,
* 100 - set REFTOP_VBGADJ[2:0] to 3b'100,
* 101 - set REFTOP_VBGADJ[2:0] to 3b'101,
* 111 - set REFTOP_VBGADJ[2:0] to 3b'111,
*/
if (is_mx6ull()) {
val = readl(&fuse->mem0);
val >>= OCOTP_MEM0_REFTOP_TRIM_SHIFT;
val &= 0x7;
writel(val << BM_ANADIG_ANA_MISC0_REFTOP_VBGADJ_SHIFT,
&anatop->ana_misc0_set);
}
}
#if defined(CONFIG_MX6Q) || defined(CONFIG_MX6QDL)
static void noc_setup(void)
{
enable_ipu_clock();
writel(0x80000201, 0xbb0608);
/* Bypass IPU1 QoS generator */
writel(0x00000002, 0x00bb048c);
/* Bypass IPU2 QoS generator */
writel(0x00000002, 0x00bb050c);
/* Bandwidth THR for of PRE0 */
writel(0x00000200, 0x00bb0690);
/* Bandwidth THR for of PRE1 */
writel(0x00000200, 0x00bb0710);
/* Bandwidth THR for of PRE2 */
writel(0x00000200, 0x00bb0790);
/* Bandwidth THR for of PRE3 */
writel(0x00000200, 0x00bb0810);
/* Saturation THR for of PRE0 */
writel(0x00000010, 0x00bb0694);
/* Saturation THR for of PRE1 */
writel(0x00000010, 0x00bb0714);
/* Saturation THR for of PRE2 */
writel(0x00000010, 0x00bb0794);
/* Saturation THR for of PRE */
writel(0x00000010, 0x00bb0814);
disable_ipu_clock();
}
#endif
int arch_cpu_init(void)
{
struct mxc_ccm_reg *ccm = (struct mxc_ccm_reg *)CCM_BASE_ADDR;
init_aips();
/* Need to clear MMDC_CHx_MASK to make warm reset work. */
clear_mmdc_ch_mask();
/*
* Disable self-bias circuit in the analog bandap.
* The self-bias circuit is used by the bandgap during startup.
* This bit should be set after the bandgap has initialized.
*/
init_bandgap();
if (!is_mx6ul() && !is_mx6ull()) {
/*
* When low freq boot is enabled, ROM will not set AHB
* freq, so we need to ensure AHB freq is 132MHz in such
* scenario.
*
* To i.MX6UL, when power up, default ARM core and
* AHB rate is 396M and 132M.
*/
if (mxc_get_clock(MXC_ARM_CLK) == 396000000)
set_ahb_rate(132000000);
}
if (is_mx6ul()) {
if (is_soc_rev(CHIP_REV_1_0) == 0) {
/*
* According to the design team's requirement on
* i.MX6UL,the PMIC_STBY_REQ PAD should be configured
* as open drain 100K (0x0000b8a0).
* Only exists on TO1.0
*/
writel(0x0000b8a0, IOMUXC_BASE_ADDR + 0x29c);
} else {
/*
* From TO1.1, SNVS adds internal pull up control
* for POR_B, the register filed is GPBIT[1:0],
* after system boot up, it can be set to 2b'01
* to disable internal pull up.It can save about
* 30uA power in SNVS mode.
*/
writel((readl(MX6UL_SNVS_LP_BASE_ADDR + 0x10) &
(~0x1400)) | 0x400,
MX6UL_SNVS_LP_BASE_ADDR + 0x10);
}
}
if (is_mx6ull()) {
/*
* GPBIT[1:0] is suggested to set to 2'b11:
* 2'b00 : always PUP100K
* 2'b01 : PUP100K when PMIC_ON_REQ or SOC_NOT_FAIL
* 2'b10 : always disable PUP100K
* 2'b11 : PDN100K when SOC_FAIL, PUP100K when SOC_NOT_FAIL
* register offset is different from i.MX6UL, since
* i.MX6UL is fixed by ECO.
*/
writel(readl(MX6UL_SNVS_LP_BASE_ADDR) |
0x3, MX6UL_SNVS_LP_BASE_ADDR);
}
/* Set perclk to source from OSC 24MHz */
if (has_err007805())
setbits_le32(&ccm->cscmr1, MXC_CCM_CSCMR1_PER_CLK_SEL_MASK);
imx_wdog_disable_powerdown(); /* Disable PDE bit of WMCR register */
if (is_mx6sx())
setbits_le32(&ccm->cscdr1, MXC_CCM_CSCDR1_UART_CLK_SEL);
init_src();
#if defined(CONFIG_MX6Q) || defined(CONFIG_MX6QDL)
if (is_mx6dqp())
noc_setup();
#endif
return 0;
}
#ifdef CONFIG_ENV_IS_IN_MMC
__weak int board_mmc_get_env_dev(int devno)
{
return CONFIG_SYS_MMC_ENV_DEV;
}
static int mmc_get_boot_dev(void)
{
struct src *src_regs = (struct src *)SRC_BASE_ADDR;
u32 soc_sbmr = readl(&src_regs->sbmr1);
u32 bootsel;
int devno;
/*
* Refer to
* "i.MX 6Dual/6Quad Applications Processor Reference Manual"
* Chapter "8.5.3.1 Expansion Device eFUSE Configuration"
* i.MX6SL/SX/UL has same layout.
*/
bootsel = (soc_sbmr & 0x000000FF) >> 6;
/* No boot from sd/mmc */
if (bootsel != 1)
return -1;
/* BOOT_CFG2[3] and BOOT_CFG2[4] */
devno = (soc_sbmr & 0x00001800) >> 11;
return devno;
}
int mmc_get_env_dev(void)
{
int devno = mmc_get_boot_dev();
/* If not boot from sd/mmc, use default value */
if (devno < 0)
return CONFIG_SYS_MMC_ENV_DEV;
return board_mmc_get_env_dev(devno);
}
#ifdef CONFIG_SYS_MMC_ENV_PART
__weak int board_mmc_get_env_part(int devno)
{
return CONFIG_SYS_MMC_ENV_PART;
}
uint mmc_get_env_part(struct mmc *mmc)
{
int devno = mmc_get_boot_dev();
/* If not boot from sd/mmc, use default value */
if (devno < 0)
return CONFIG_SYS_MMC_ENV_PART;
return board_mmc_get_env_part(devno);
}
#endif
#endif
int board_postclk_init(void)
{
/* NO LDO SOC on i.MX6SLL */
if (is_mx6sll())
return 0;
set_ldo_voltage(LDO_SOC, 1175); /* Set VDDSOC to 1.175V */
return 0;
}
#ifndef CONFIG_SPL_BUILD
/*
* cfg_val will be used for
* Boot_cfg4[7:0]:Boot_cfg3[7:0]:Boot_cfg2[7:0]:Boot_cfg1[7:0]
* After reset, if GPR10[28] is 1, ROM will use GPR9[25:0]
* instead of SBMR1 to determine the boot device.
*/
const struct boot_mode soc_boot_modes[] = {
{"normal", MAKE_CFGVAL(0x00, 0x00, 0x00, 0x00)},
/* reserved value should start rom usb */
#if defined(CONFIG_MX6UL) || defined(CONFIG_MX6ULL)
{"usb", MAKE_CFGVAL(0x20, 0x00, 0x00, 0x00)},
#else
{"usb", MAKE_CFGVAL(0x10, 0x00, 0x00, 0x00)},
#endif
{"sata", MAKE_CFGVAL(0x20, 0x00, 0x00, 0x00)},
{"ecspi1:0", MAKE_CFGVAL(0x30, 0x00, 0x00, 0x08)},
{"ecspi1:1", MAKE_CFGVAL(0x30, 0x00, 0x00, 0x18)},
{"ecspi1:2", MAKE_CFGVAL(0x30, 0x00, 0x00, 0x28)},
{"ecspi1:3", MAKE_CFGVAL(0x30, 0x00, 0x00, 0x38)},
/* 4 bit bus width */
{"esdhc1", MAKE_CFGVAL(0x40, 0x20, 0x00, 0x00)},
{"esdhc2", MAKE_CFGVAL(0x40, 0x28, 0x00, 0x00)},
{"esdhc3", MAKE_CFGVAL(0x40, 0x30, 0x00, 0x00)},
{"esdhc4", MAKE_CFGVAL(0x40, 0x38, 0x00, 0x00)},
{NULL, 0},
};
#endif
void reset_misc(void)
{
#ifndef CONFIG_SPL_BUILD
#if defined(CONFIG_VIDEO_MXS) && !defined(CONFIG_DM_VIDEO)
lcdif_power_down();
#endif
#endif
}
void s_init(void)
{
struct anatop_regs *anatop = (struct anatop_regs *)ANATOP_BASE_ADDR;
struct mxc_ccm_reg *ccm = (struct mxc_ccm_reg *)CCM_BASE_ADDR;
u32 mask480;
u32 mask528;
u32 reg, periph1, periph2;
if (is_mx6sx() || is_mx6ul() || is_mx6ull() || is_mx6sll())
return;
/* Due to hardware limitation, on MX6Q we need to gate/ungate all PFDs
* to make sure PFD is working right, otherwise, PFDs may
* not output clock after reset, MX6DL and MX6SL have added 396M pfd
* workaround in ROM code, as bus clock need it
*/
mask480 = ANATOP_PFD_CLKGATE_MASK(0) |
ANATOP_PFD_CLKGATE_MASK(1) |
ANATOP_PFD_CLKGATE_MASK(2) |
ANATOP_PFD_CLKGATE_MASK(3);
mask528 = ANATOP_PFD_CLKGATE_MASK(1) |
ANATOP_PFD_CLKGATE_MASK(3);
reg = readl(&ccm->cbcmr);
periph2 = ((reg & MXC_CCM_CBCMR_PRE_PERIPH2_CLK_SEL_MASK)
>> MXC_CCM_CBCMR_PRE_PERIPH2_CLK_SEL_OFFSET);
periph1 = ((reg & MXC_CCM_CBCMR_PRE_PERIPH_CLK_SEL_MASK)
>> MXC_CCM_CBCMR_PRE_PERIPH_CLK_SEL_OFFSET);
/* Checking if PLL2 PFD0 or PLL2 PFD2 is using for periph clock */
if ((periph2 != 0x2) && (periph1 != 0x2))
mask528 |= ANATOP_PFD_CLKGATE_MASK(0);
if ((periph2 != 0x1) && (periph1 != 0x1) &&
(periph2 != 0x3) && (periph1 != 0x3))
mask528 |= ANATOP_PFD_CLKGATE_MASK(2);
writel(mask480, &anatop->pfd_480_set);
writel(mask528, &anatop->pfd_528_set);
writel(mask480, &anatop->pfd_480_clr);
writel(mask528, &anatop->pfd_528_clr);
}
#ifdef CONFIG_IMX_HDMI
void imx_enable_hdmi_phy(void)
{
struct hdmi_regs *hdmi = (struct hdmi_regs *)HDMI_ARB_BASE_ADDR;
u8 reg;
reg = readb(&hdmi->phy_conf0);
reg |= HDMI_PHY_CONF0_PDZ_MASK;
writeb(reg, &hdmi->phy_conf0);
udelay(3000);
reg |= HDMI_PHY_CONF0_ENTMDS_MASK;
writeb(reg, &hdmi->phy_conf0);
udelay(3000);
reg |= HDMI_PHY_CONF0_GEN2_TXPWRON_MASK;
writeb(reg, &hdmi->phy_conf0);
writeb(HDMI_MC_PHYRSTZ_ASSERT, &hdmi->mc_phyrstz);
}
void imx_setup_hdmi(void)
{
struct mxc_ccm_reg *mxc_ccm = (struct mxc_ccm_reg *)CCM_BASE_ADDR;
struct hdmi_regs *hdmi = (struct hdmi_regs *)HDMI_ARB_BASE_ADDR;
int reg, count;
u8 val;
/* Turn on HDMI PHY clock */
reg = readl(&mxc_ccm->CCGR2);
reg |= MXC_CCM_CCGR2_HDMI_TX_IAHBCLK_MASK|
MXC_CCM_CCGR2_HDMI_TX_ISFRCLK_MASK;
writel(reg, &mxc_ccm->CCGR2);
writeb(HDMI_MC_PHYRSTZ_DEASSERT, &hdmi->mc_phyrstz);
reg = readl(&mxc_ccm->chsccdr);
reg &= ~(MXC_CCM_CHSCCDR_IPU1_DI0_PRE_CLK_SEL_MASK|
MXC_CCM_CHSCCDR_IPU1_DI0_PODF_MASK|
MXC_CCM_CHSCCDR_IPU1_DI0_CLK_SEL_MASK);
reg |= (CHSCCDR_PODF_DIVIDE_BY_3
<< MXC_CCM_CHSCCDR_IPU1_DI0_PODF_OFFSET)
|(CHSCCDR_IPU_PRE_CLK_540M_PFD
<< MXC_CCM_CHSCCDR_IPU1_DI0_PRE_CLK_SEL_OFFSET);
writel(reg, &mxc_ccm->chsccdr);
/* Clear the overflow condition */
if (readb(&hdmi->ih_fc_stat2) & HDMI_IH_FC_STAT2_OVERFLOW_MASK) {
/* TMDS software reset */
writeb((u8)~HDMI_MC_SWRSTZ_TMDSSWRST_REQ, &hdmi->mc_swrstz);
val = readb(&hdmi->fc_invidconf);
/* Need minimum 3 times to write to clear the register */
for (count = 0 ; count < 5 ; count++)
writeb(val, &hdmi->fc_invidconf);
}
}
#endif
#ifdef CONFIG_ARCH_MISC_INIT
int arch_misc_init(void)
{
#ifdef CONFIG_FSL_CAAM
sec_init();
#endif
return 0;
}
#endif
/*
* gpr_init() function is common for boards using MX6S, MX6DL, MX6D,
* MX6Q and MX6QP processors
*/
void gpr_init(void)
{
struct iomuxc *iomux = (struct iomuxc *)IOMUXC_BASE_ADDR;
/*
* If this function is used in a common MX6 spl implementation
* we have to ensure that it is only called for suitable cpu types,
* otherwise it breaks hardware parts like enet1, can1, can2, etc.
*/
if (!is_mx6dqp() && !is_mx6dq() && !is_mx6sdl())
return;
/* enable AXI cache for VDOA/VPU/IPU */
writel(0xF00000CF, &iomux->gpr[4]);
if (is_mx6dqp()) {
/* set IPU AXI-id1 Qos=0x1 AXI-id0/2/3 Qos=0x7 */
writel(0x77177717, &iomux->gpr[6]);
writel(0x77177717, &iomux->gpr[7]);
} else {
/* set IPU AXI-id0 Qos=0xf(bypass) AXI-id1 Qos=0x7 */
writel(0x007F007F, &iomux->gpr[6]);
writel(0x007F007F, &iomux->gpr[7]);
}
}
Reference in a new issue View git blame Copy permalink