mirror of
https://github.com/AsahiLinux/u-boot
synced 2024-12-21 02:33:07 +00:00
6239cc8c4e
Sync all J7200 related v5.11-rc6 Linux kernel dts into U-Boot. MCU R5F nodes are not yet added in Linux kernel yet but were added in U-Boot. In order to avoid regressions, r5f nodes are kept intact. These will be added in kernel in future. Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
332 lines
8.4 KiB
Text
332 lines
8.4 KiB
Text
// SPDX-License-Identifier: GPL-2.0
|
|
/*
|
|
* Device Tree Source for J7200 SoC Family MCU/WAKEUP Domain peripherals
|
|
*
|
|
* Copyright (C) 2020 Texas Instruments Incorporated - https://www.ti.com/
|
|
*/
|
|
|
|
&cbass_mcu_wakeup {
|
|
dmsc: dmsc@44083000 {
|
|
compatible = "ti,k2g-sci";
|
|
ti,host-id = <12>;
|
|
|
|
mbox-names = "rx", "tx";
|
|
|
|
mboxes= <&secure_proxy_main 11>,
|
|
<&secure_proxy_main 13>;
|
|
|
|
reg-names = "debug_messages";
|
|
reg = <0x00 0x44083000 0x00 0x1000>;
|
|
|
|
k3_pds: power-controller {
|
|
compatible = "ti,sci-pm-domain";
|
|
#power-domain-cells = <2>;
|
|
};
|
|
|
|
k3_clks: clocks {
|
|
compatible = "ti,k2g-sci-clk";
|
|
#clock-cells = <2>;
|
|
};
|
|
|
|
k3_reset: reset-controller {
|
|
compatible = "ti,sci-reset";
|
|
#reset-cells = <2>;
|
|
};
|
|
};
|
|
|
|
mcu_conf: syscon@40f00000 {
|
|
compatible = "syscon", "simple-mfd";
|
|
reg = <0x00 0x40f00000 0x00 0x20000>;
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
ranges = <0x00 0x00 0x40f00000 0x20000>;
|
|
|
|
phy_gmii_sel: phy@4040 {
|
|
compatible = "ti,am654-phy-gmii-sel";
|
|
reg = <0x4040 0x4>;
|
|
#phy-cells = <1>;
|
|
};
|
|
};
|
|
|
|
chipid@43000014 {
|
|
compatible = "ti,am654-chipid";
|
|
reg = <0x00 0x43000014 0x00 0x4>;
|
|
};
|
|
|
|
wkup_pmx0: pinctrl@4301c000 {
|
|
compatible = "pinctrl-single";
|
|
/* Proxy 0 addressing */
|
|
reg = <0x00 0x4301c000 0x00 0x178>;
|
|
#pinctrl-cells = <1>;
|
|
pinctrl-single,register-width = <32>;
|
|
pinctrl-single,function-mask = <0xffffffff>;
|
|
};
|
|
|
|
mcu_ram: sram@41c00000 {
|
|
compatible = "mmio-sram";
|
|
reg = <0x00 0x41c00000 0x00 0x100000>;
|
|
ranges = <0x00 0x00 0x41c00000 0x100000>;
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
};
|
|
|
|
wkup_uart0: serial@42300000 {
|
|
compatible = "ti,j721e-uart", "ti,am654-uart";
|
|
reg = <0x00 0x42300000 0x00 0x100>;
|
|
reg-shift = <2>;
|
|
reg-io-width = <4>;
|
|
interrupts = <GIC_SPI 897 IRQ_TYPE_LEVEL_HIGH>;
|
|
clock-frequency = <48000000>;
|
|
current-speed = <115200>;
|
|
power-domains = <&k3_pds 287 TI_SCI_PD_EXCLUSIVE>;
|
|
clocks = <&k3_clks 287 2>;
|
|
clock-names = "fclk";
|
|
};
|
|
|
|
mcu_uart0: serial@40a00000 {
|
|
compatible = "ti,j721e-uart", "ti,am654-uart";
|
|
reg = <0x00 0x40a00000 0x00 0x100>;
|
|
reg-shift = <2>;
|
|
reg-io-width = <4>;
|
|
interrupts = <GIC_SPI 846 IRQ_TYPE_LEVEL_HIGH>;
|
|
clock-frequency = <96000000>;
|
|
current-speed = <115200>;
|
|
power-domains = <&k3_pds 149 TI_SCI_PD_EXCLUSIVE>;
|
|
clocks = <&k3_clks 149 2>;
|
|
clock-names = "fclk";
|
|
};
|
|
|
|
wkup_gpio_intr: interrupt-controller2 {
|
|
compatible = "ti,sci-intr";
|
|
ti,intr-trigger-type = <1>;
|
|
interrupt-controller;
|
|
interrupt-parent = <&gic500>;
|
|
#interrupt-cells = <1>;
|
|
ti,sci = <&dmsc>;
|
|
ti,sci-dev-id = <137>;
|
|
ti,interrupt-ranges = <16 960 16>;
|
|
};
|
|
|
|
mcu_navss: bus@28380000 {
|
|
compatible = "simple-mfd";
|
|
#address-cells = <2>;
|
|
#size-cells = <2>;
|
|
ranges = <0x00 0x28380000 0x00 0x28380000 0x00 0x03880000>;
|
|
dma-coherent;
|
|
dma-ranges;
|
|
ti,sci-dev-id = <232>;
|
|
|
|
mcu_ringacc: ringacc@2b800000 {
|
|
compatible = "ti,am654-navss-ringacc";
|
|
reg = <0x00 0x2b800000 0x00 0x400000>,
|
|
<0x00 0x2b000000 0x00 0x400000>,
|
|
<0x00 0x28590000 0x00 0x100>,
|
|
<0x00 0x2a500000 0x00 0x40000>;
|
|
reg-names = "rt", "fifos", "proxy_gcfg", "proxy_target";
|
|
ti,num-rings = <286>;
|
|
ti,sci-rm-range-gp-rings = <0x1>; /* GP ring range */
|
|
ti,sci = <&dmsc>;
|
|
ti,sci-dev-id = <235>;
|
|
msi-parent = <&main_udmass_inta>;
|
|
};
|
|
|
|
mcu_udmap: dma-controller@285c0000 {
|
|
compatible = "ti,j721e-navss-mcu-udmap";
|
|
reg = <0x00 0x285c0000 0x00 0x100>,
|
|
<0x00 0x2a800000 0x00 0x40000>,
|
|
<0x00 0x2aa00000 0x00 0x40000>;
|
|
reg-names = "gcfg", "rchanrt", "tchanrt";
|
|
msi-parent = <&main_udmass_inta>;
|
|
#dma-cells = <1>;
|
|
|
|
ti,sci = <&dmsc>;
|
|
ti,sci-dev-id = <236>;
|
|
ti,ringacc = <&mcu_ringacc>;
|
|
|
|
ti,sci-rm-range-tchan = <0x0d>, /* TX_CHAN */
|
|
<0x0f>; /* TX_HCHAN */
|
|
ti,sci-rm-range-rchan = <0x0a>, /* RX_CHAN */
|
|
<0x0b>; /* RX_HCHAN */
|
|
ti,sci-rm-range-rflow = <0x00>; /* GP RFLOW */
|
|
};
|
|
};
|
|
|
|
mcu_cpsw: ethernet@46000000 {
|
|
compatible = "ti,j721e-cpsw-nuss";
|
|
#address-cells = <2>;
|
|
#size-cells = <2>;
|
|
reg = <0x00 0x46000000 0x00 0x200000>;
|
|
reg-names = "cpsw_nuss";
|
|
ranges = <0x00 0x00 0x00 0x46000000 0x00 0x200000>;
|
|
dma-coherent;
|
|
clocks = <&k3_clks 18 21>;
|
|
clock-names = "fck";
|
|
power-domains = <&k3_pds 18 TI_SCI_PD_EXCLUSIVE>;
|
|
|
|
dmas = <&mcu_udmap 0xf000>,
|
|
<&mcu_udmap 0xf001>,
|
|
<&mcu_udmap 0xf002>,
|
|
<&mcu_udmap 0xf003>,
|
|
<&mcu_udmap 0xf004>,
|
|
<&mcu_udmap 0xf005>,
|
|
<&mcu_udmap 0xf006>,
|
|
<&mcu_udmap 0xf007>,
|
|
<&mcu_udmap 0x7000>;
|
|
dma-names = "tx0", "tx1", "tx2", "tx3",
|
|
"tx4", "tx5", "tx6", "tx7",
|
|
"rx";
|
|
|
|
ethernet-ports {
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
|
|
cpsw_port1: port@1 {
|
|
reg = <1>;
|
|
ti,mac-only;
|
|
label = "port1";
|
|
ti,syscon-efuse = <&mcu_conf 0x200>;
|
|
phys = <&phy_gmii_sel 1>;
|
|
};
|
|
};
|
|
|
|
davinci_mdio: mdio@f00 {
|
|
compatible = "ti,cpsw-mdio","ti,davinci_mdio";
|
|
reg = <0x00 0xf00 0x00 0x100>;
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
clocks = <&k3_clks 18 21>;
|
|
clock-names = "fck";
|
|
bus_freq = <1000000>;
|
|
};
|
|
|
|
cpts@3d000 {
|
|
compatible = "ti,am65-cpts";
|
|
reg = <0x00 0x3d000 0x00 0x400>;
|
|
clocks = <&k3_clks 18 2>;
|
|
clock-names = "cpts";
|
|
interrupts-extended = <&gic500 GIC_SPI 858 IRQ_TYPE_LEVEL_HIGH>;
|
|
interrupt-names = "cpts";
|
|
ti,cpts-ext-ts-inputs = <4>;
|
|
ti,cpts-periodic-outputs = <2>;
|
|
};
|
|
};
|
|
|
|
mcu_i2c0: i2c@40b00000 {
|
|
compatible = "ti,j721e-i2c", "ti,omap4-i2c";
|
|
reg = <0x00 0x40b00000 0x00 0x100>;
|
|
interrupts = <GIC_SPI 852 IRQ_TYPE_LEVEL_HIGH>;
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
clock-names = "fck";
|
|
clocks = <&k3_clks 194 1>;
|
|
power-domains = <&k3_pds 194 TI_SCI_PD_EXCLUSIVE>;
|
|
};
|
|
|
|
mcu_i2c1: i2c@40b10000 {
|
|
compatible = "ti,j721e-i2c", "ti,omap4-i2c";
|
|
reg = <0x00 0x40b10000 0x00 0x100>;
|
|
interrupts = <GIC_SPI 853 IRQ_TYPE_LEVEL_HIGH>;
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
clock-names = "fck";
|
|
clocks = <&k3_clks 195 1>;
|
|
power-domains = <&k3_pds 195 TI_SCI_PD_EXCLUSIVE>;
|
|
};
|
|
|
|
wkup_i2c0: i2c@42120000 {
|
|
compatible = "ti,j721e-i2c", "ti,omap4-i2c";
|
|
reg = <0x00 0x42120000 0x00 0x100>;
|
|
interrupts = <GIC_SPI 896 IRQ_TYPE_LEVEL_HIGH>;
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
clock-names = "fck";
|
|
clocks = <&k3_clks 197 1>;
|
|
power-domains = <&k3_pds 197 TI_SCI_PD_SHARED>;
|
|
};
|
|
|
|
fss: syscon@47000000 {
|
|
compatible = "syscon", "simple-mfd";
|
|
reg = <0x00 0x47000000 0x00 0x100>;
|
|
#address-cells = <2>;
|
|
#size-cells = <2>;
|
|
ranges;
|
|
|
|
hbmc_mux: hbmc-mux {
|
|
compatible = "mmio-mux";
|
|
#mux-control-cells = <1>;
|
|
mux-reg-masks = <0x4 0x2>; /* HBMC select */
|
|
};
|
|
|
|
hbmc: hyperbus@47034000 {
|
|
compatible = "ti,am654-hbmc";
|
|
reg = <0x00 0x47034000 0x00 0x100>,
|
|
<0x05 0x00000000 0x01 0x0000000>;
|
|
power-domains = <&k3_pds 102 TI_SCI_PD_EXCLUSIVE>;
|
|
clocks = <&k3_clks 102 0>;
|
|
assigned-clocks = <&k3_clks 102 5>;
|
|
assigned-clock-rates = <333333333>;
|
|
#address-cells = <2>;
|
|
#size-cells = <1>;
|
|
mux-controls = <&hbmc_mux 0>;
|
|
};
|
|
};
|
|
|
|
tscadc0: tscadc@40200000 {
|
|
compatible = "ti,am3359-tscadc";
|
|
reg = <0x00 0x40200000 0x00 0x1000>;
|
|
interrupts = <GIC_SPI 860 IRQ_TYPE_LEVEL_HIGH>;
|
|
power-domains = <&k3_pds 0 TI_SCI_PD_EXCLUSIVE>;
|
|
clocks = <&k3_clks 0 1>;
|
|
assigned-clocks = <&k3_clks 0 3>;
|
|
assigned-clock-rates = <60000000>;
|
|
clock-names = "adc_tsc_fck";
|
|
dmas = <&main_udmap 0x7400>,
|
|
<&main_udmap 0x7401>;
|
|
dma-names = "fifo0", "fifo1";
|
|
|
|
adc {
|
|
#io-channel-cells = <1>;
|
|
compatible = "ti,am3359-adc";
|
|
};
|
|
};
|
|
|
|
mcu_r5fss0: r5fss@41000000 {
|
|
compatible = "ti,j7200-r5fss";
|
|
ti,cluster-mode = <1>;
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
ranges = <0x41000000 0x00 0x41000000 0x20000>,
|
|
<0x41400000 0x00 0x41400000 0x20000>;
|
|
power-domains = <&k3_pds 249 TI_SCI_PD_EXCLUSIVE>;
|
|
|
|
mcu_r5fss0_core0: r5f@41000000 {
|
|
compatible = "ti,j7200-r5f";
|
|
reg = <0x41000000 0x00010000>,
|
|
<0x41010000 0x00010000>;
|
|
reg-names = "atcm", "btcm";
|
|
ti,sci = <&dmsc>;
|
|
ti,sci-dev-id = <250>;
|
|
ti,sci-proc-ids = <0x01 0xff>;
|
|
resets = <&k3_reset 250 1>;
|
|
firmware-name = "j7200-mcu-r5f0_0-fw";
|
|
ti,atcm-enable = <1>;
|
|
ti,btcm-enable = <1>;
|
|
ti,loczrama = <1>;
|
|
};
|
|
|
|
mcu_r5fss0_core1: r5f@41400000 {
|
|
compatible = "ti,j7200-r5f";
|
|
reg = <0x41400000 0x00008000>,
|
|
<0x41410000 0x00008000>;
|
|
reg-names = "atcm", "btcm";
|
|
ti,sci = <&dmsc>;
|
|
ti,sci-dev-id = <251>;
|
|
ti,sci-proc-ids = <0x02 0xff>;
|
|
resets = <&k3_reset 251 1>;
|
|
firmware-name = "j7200-mcu-r5f0_1-fw";
|
|
ti,atcm-enable = <1>;
|
|
ti,btcm-enable = <1>;
|
|
ti,loczrama = <1>;
|
|
};
|
|
};
|
|
};
|