mirror of
https://github.com/AsahiLinux/u-boot
synced 2024-12-21 10:43:06 +00:00
3a187cff7a
LX2162 is LX2160 based SoC, it has same die as of LX2160 with different packaging. LX2162A support 64-bit 2.9GT/s DDR4 memory, i2c, micro-click module, microSD card, eMMC support, serial console, qspi nor flash, qsgmii, sgmii, 25g, 40g, 50g network interface, one usb 3.0 and serdes interface to support three PCIe gen3 interface. Signed-off-by: Meenakshi Aggarwal <meenakshi.aggarwal@nxp.com> [Fixed whitespace errors] Signed-off-by: Priyanka Jain <priyanka.jain@nxp.com>
642 lines
16 KiB
Text
642 lines
16 KiB
Text
config ARCH_LS1012A
|
|
bool
|
|
select ARMV8_SET_SMPEN
|
|
select ARM_ERRATA_855873 if !TFABOOT
|
|
select FSL_LAYERSCAPE
|
|
select FSL_LSCH2
|
|
select SYS_FSL_SRDS_1
|
|
select SYS_HAS_SERDES
|
|
select SYS_FSL_DDR_BE
|
|
select SYS_FSL_MMDC
|
|
select SYS_FSL_ERRATUM_A010315
|
|
select SYS_FSL_ERRATUM_A009798
|
|
select SYS_FSL_ERRATUM_A008997
|
|
select SYS_FSL_ERRATUM_A009007
|
|
select SYS_FSL_ERRATUM_A009008
|
|
select ARCH_EARLY_INIT_R
|
|
select BOARD_EARLY_INIT_F
|
|
select SYS_I2C_MXC
|
|
select SYS_I2C_MXC_I2C1 if !DM_I2C
|
|
select SYS_I2C_MXC_I2C2 if !DM_I2C
|
|
imply PANIC_HANG
|
|
|
|
config ARCH_LS1028A
|
|
bool
|
|
select ARMV8_SET_SMPEN
|
|
select FSL_LAYERSCAPE
|
|
select FSL_LSCH3
|
|
select NXP_LSCH3_2
|
|
select SYS_FSL_HAS_CCI400
|
|
select SYS_FSL_SRDS_1
|
|
select SYS_HAS_SERDES
|
|
select SYS_FSL_DDR
|
|
select SYS_FSL_DDR_LE
|
|
select SYS_FSL_DDR_VER_50
|
|
select SYS_FSL_HAS_DDR3
|
|
select SYS_FSL_HAS_DDR4
|
|
select SYS_FSL_HAS_SEC
|
|
select SYS_FSL_SEC_COMPAT_5
|
|
select SYS_FSL_SEC_LE
|
|
select FSL_TZASC_1
|
|
select ARCH_EARLY_INIT_R
|
|
select BOARD_EARLY_INIT_F
|
|
select SYS_I2C_MXC
|
|
select SYS_FSL_ERRATUM_A008997
|
|
select SYS_FSL_ERRATUM_A009007
|
|
select SYS_FSL_ERRATUM_A008514 if !TFABOOT
|
|
select SYS_FSL_ERRATUM_A009663 if !TFABOOT
|
|
select SYS_FSL_ERRATUM_A009942 if !TFABOOT
|
|
select SYS_FSL_ERRATUM_A050382
|
|
select RESV_RAM if GIC_V3_ITS
|
|
imply PANIC_HANG
|
|
|
|
config ARCH_LS1043A
|
|
bool
|
|
select ARMV8_SET_SMPEN
|
|
select ARM_ERRATA_855873 if !TFABOOT
|
|
select FSL_LAYERSCAPE
|
|
select FSL_LSCH2
|
|
select SYS_FSL_SRDS_1
|
|
select SYS_HAS_SERDES
|
|
select SYS_FSL_DDR
|
|
select SYS_FSL_DDR_BE
|
|
select SYS_FSL_DDR_VER_50
|
|
select SYS_FSL_ERRATUM_A008850 if !TFABOOT
|
|
select SYS_FSL_ERRATUM_A008997
|
|
select SYS_FSL_ERRATUM_A009007
|
|
select SYS_FSL_ERRATUM_A009008
|
|
select SYS_FSL_ERRATUM_A009660 if !TFABOOT
|
|
select SYS_FSL_ERRATUM_A009663 if !TFABOOT
|
|
select SYS_FSL_ERRATUM_A009798
|
|
select SYS_FSL_ERRATUM_A009942 if !TFABOOT
|
|
select SYS_FSL_ERRATUM_A010315
|
|
select SYS_FSL_ERRATUM_A010539
|
|
select SYS_FSL_HAS_DDR3
|
|
select SYS_FSL_HAS_DDR4
|
|
select ARCH_EARLY_INIT_R
|
|
select BOARD_EARLY_INIT_F
|
|
select SYS_I2C_MXC
|
|
select SYS_I2C_MXC_I2C1 if !DM_I2C
|
|
select SYS_I2C_MXC_I2C2 if !DM_I2C
|
|
select SYS_I2C_MXC_I2C3 if !DM_I2C
|
|
select SYS_I2C_MXC_I2C4 if !DM_I2C
|
|
imply CMD_PCI
|
|
|
|
config ARCH_LS1046A
|
|
bool
|
|
select ARMV8_SET_SMPEN
|
|
select FSL_LAYERSCAPE
|
|
select FSL_LSCH2
|
|
select SYS_FSL_SRDS_1
|
|
select SYS_HAS_SERDES
|
|
select SYS_FSL_DDR
|
|
select SYS_FSL_DDR_BE
|
|
select SYS_FSL_DDR_VER_50
|
|
select SYS_FSL_ERRATUM_A008336 if !TFABOOT
|
|
select SYS_FSL_ERRATUM_A008511 if !TFABOOT
|
|
select SYS_FSL_ERRATUM_A008850 if !TFABOOT
|
|
select SYS_FSL_ERRATUM_A008997
|
|
select SYS_FSL_ERRATUM_A009007
|
|
select SYS_FSL_ERRATUM_A009008
|
|
select SYS_FSL_ERRATUM_A009798
|
|
select SYS_FSL_ERRATUM_A009801
|
|
select SYS_FSL_ERRATUM_A009803 if !TFABOOT
|
|
select SYS_FSL_ERRATUM_A009942 if !TFABOOT
|
|
select SYS_FSL_ERRATUM_A010165 if !TFABOOT
|
|
select SYS_FSL_ERRATUM_A010539
|
|
select SYS_FSL_HAS_DDR4
|
|
select SYS_FSL_SRDS_2
|
|
select ARCH_EARLY_INIT_R
|
|
select BOARD_EARLY_INIT_F
|
|
select SYS_I2C_MXC
|
|
select SYS_I2C_MXC_I2C1 if !DM_I2C
|
|
select SYS_I2C_MXC_I2C2 if !DM_I2C
|
|
select SYS_I2C_MXC_I2C3 if !DM_I2C
|
|
select SYS_I2C_MXC_I2C4 if !DM_I2C
|
|
imply SCSI
|
|
imply SCSI_AHCI
|
|
|
|
config ARCH_LS1088A
|
|
bool
|
|
select ARMV8_SET_SMPEN
|
|
select ARM_ERRATA_855873 if !TFABOOT
|
|
select FSL_LAYERSCAPE
|
|
select FSL_LSCH3
|
|
select SYS_FSL_SRDS_1
|
|
select SYS_HAS_SERDES
|
|
select SYS_FSL_DDR
|
|
select SYS_FSL_DDR_LE
|
|
select SYS_FSL_DDR_VER_50
|
|
select SYS_FSL_EC1
|
|
select SYS_FSL_EC2
|
|
select SYS_FSL_ERRATUM_A009803 if !TFABOOT
|
|
select SYS_FSL_ERRATUM_A009942 if !TFABOOT
|
|
select SYS_FSL_ERRATUM_A010165 if !TFABOOT
|
|
select SYS_FSL_ERRATUM_A008511 if !TFABOOT
|
|
select SYS_FSL_ERRATUM_A008850 if !TFABOOT
|
|
select SYS_FSL_ERRATUM_A009007
|
|
select SYS_FSL_HAS_CCI400
|
|
select SYS_FSL_HAS_DDR4
|
|
select SYS_FSL_HAS_RGMII
|
|
select SYS_FSL_HAS_SEC
|
|
select SYS_FSL_SEC_COMPAT_5
|
|
select SYS_FSL_SEC_LE
|
|
select SYS_FSL_SRDS_1
|
|
select SYS_FSL_SRDS_2
|
|
select FSL_TZASC_1
|
|
select FSL_TZASC_400
|
|
select FSL_TZPC_BP147
|
|
select ARCH_EARLY_INIT_R
|
|
select BOARD_EARLY_INIT_F
|
|
select SYS_I2C_MXC
|
|
select SYS_I2C_MXC_I2C1 if !TFABOOT
|
|
select SYS_I2C_MXC_I2C2 if !TFABOOT
|
|
select SYS_I2C_MXC_I2C3 if !TFABOOT
|
|
select SYS_I2C_MXC_I2C4 if !TFABOOT
|
|
select RESV_RAM if GIC_V3_ITS
|
|
imply SCSI
|
|
imply PANIC_HANG
|
|
|
|
config ARCH_LS2080A
|
|
bool
|
|
select ARMV8_SET_SMPEN
|
|
select ARM_ERRATA_826974
|
|
select ARM_ERRATA_828024
|
|
select ARM_ERRATA_829520
|
|
select ARM_ERRATA_833471
|
|
select FSL_LAYERSCAPE
|
|
select FSL_LSCH3
|
|
select SYS_FSL_SRDS_1
|
|
select SYS_HAS_SERDES
|
|
select SYS_FSL_DDR
|
|
select SYS_FSL_DDR_LE
|
|
select SYS_FSL_DDR_VER_50
|
|
select SYS_FSL_HAS_CCN504
|
|
select SYS_FSL_HAS_DP_DDR
|
|
select SYS_FSL_HAS_SEC
|
|
select SYS_FSL_HAS_DDR4
|
|
select SYS_FSL_SEC_COMPAT_5
|
|
select SYS_FSL_SEC_LE
|
|
select SYS_FSL_SRDS_2
|
|
select FSL_TZASC_1
|
|
select FSL_TZASC_2
|
|
select FSL_TZASC_400
|
|
select FSL_TZPC_BP147
|
|
select SYS_FSL_ERRATUM_A008336 if !TFABOOT
|
|
select SYS_FSL_ERRATUM_A008511 if !TFABOOT
|
|
select SYS_FSL_ERRATUM_A008514 if !TFABOOT
|
|
select SYS_FSL_ERRATUM_A008585
|
|
select SYS_FSL_ERRATUM_A008997
|
|
select SYS_FSL_ERRATUM_A009007
|
|
select SYS_FSL_ERRATUM_A009008
|
|
select SYS_FSL_ERRATUM_A009635
|
|
select SYS_FSL_ERRATUM_A009663 if !TFABOOT
|
|
select SYS_FSL_ERRATUM_A009798
|
|
select SYS_FSL_ERRATUM_A009801
|
|
select SYS_FSL_ERRATUM_A009803 if !TFABOOT
|
|
select SYS_FSL_ERRATUM_A009942 if !TFABOOT
|
|
select SYS_FSL_ERRATUM_A010165 if !TFABOOT
|
|
select SYS_FSL_ERRATUM_A009203
|
|
select ARCH_EARLY_INIT_R
|
|
select BOARD_EARLY_INIT_F
|
|
select SYS_I2C_MXC
|
|
select SYS_I2C_MXC_I2C1 if !TFABOOT
|
|
select SYS_I2C_MXC_I2C2 if !TFABOOT
|
|
select SYS_I2C_MXC_I2C3 if !TFABOOT
|
|
select SYS_I2C_MXC_I2C4 if !TFABOOT
|
|
select RESV_RAM if GIC_V3_ITS
|
|
imply DISTRO_DEFAULTS
|
|
imply PANIC_HANG
|
|
|
|
config ARCH_LX2162A
|
|
bool
|
|
select ARMV8_SET_SMPEN
|
|
select FSL_LSCH3
|
|
select NXP_LSCH3_2
|
|
select SYS_HAS_SERDES
|
|
select SYS_FSL_SRDS_1
|
|
select SYS_FSL_SRDS_2
|
|
select SYS_FSL_DDR
|
|
select SYS_FSL_DDR_LE
|
|
select SYS_FSL_DDR_VER_50
|
|
select SYS_FSL_EC1
|
|
select SYS_FSL_EC2
|
|
select SYS_FSL_ERRATUM_A050106
|
|
select SYS_FSL_HAS_RGMII
|
|
select SYS_FSL_HAS_SEC
|
|
select SYS_FSL_HAS_CCN508
|
|
select SYS_FSL_HAS_DDR4
|
|
select SYS_FSL_SEC_COMPAT_5
|
|
select SYS_FSL_SEC_LE
|
|
select ARCH_EARLY_INIT_R
|
|
select BOARD_EARLY_INIT_F
|
|
select SYS_I2C_MXC
|
|
select RESV_RAM if GIC_V3_ITS
|
|
imply DISTRO_DEFAULTS
|
|
imply PANIC_HANG
|
|
imply SCSI
|
|
imply SCSI_AHCI
|
|
|
|
config ARCH_LX2160A
|
|
bool
|
|
select ARMV8_SET_SMPEN
|
|
select FSL_LSCH3
|
|
select NXP_LSCH3_2
|
|
select SYS_HAS_SERDES
|
|
select SYS_FSL_SRDS_1
|
|
select SYS_FSL_SRDS_2
|
|
select SYS_NXP_SRDS_3
|
|
select SYS_FSL_DDR
|
|
select SYS_FSL_DDR_LE
|
|
select SYS_FSL_DDR_VER_50
|
|
select SYS_FSL_EC1
|
|
select SYS_FSL_EC2
|
|
select SYS_FSL_ERRATUM_A050106
|
|
select SYS_FSL_HAS_RGMII
|
|
select SYS_FSL_HAS_SEC
|
|
select SYS_FSL_HAS_CCN508
|
|
select SYS_FSL_HAS_DDR4
|
|
select SYS_FSL_SEC_COMPAT_5
|
|
select SYS_FSL_SEC_LE
|
|
select ARCH_EARLY_INIT_R
|
|
select BOARD_EARLY_INIT_F
|
|
select SYS_I2C_MXC
|
|
select RESV_RAM if GIC_V3_ITS
|
|
imply DISTRO_DEFAULTS
|
|
imply PANIC_HANG
|
|
imply SCSI
|
|
imply SCSI_AHCI
|
|
|
|
config FSL_LSCH2
|
|
bool
|
|
select SYS_FSL_HAS_CCI400
|
|
select SYS_FSL_HAS_SEC
|
|
select SYS_FSL_SEC_COMPAT_5
|
|
select SYS_FSL_SEC_BE
|
|
|
|
config FSL_LSCH3
|
|
select ARCH_MISC_INIT
|
|
bool
|
|
|
|
config NXP_LSCH3_2
|
|
bool
|
|
|
|
menu "Layerscape architecture"
|
|
depends on FSL_LSCH2 || FSL_LSCH3
|
|
|
|
config FSL_LAYERSCAPE
|
|
bool
|
|
|
|
config HAS_FEATURE_GIC64K_ALIGN
|
|
bool
|
|
default y if ARCH_LS1043A
|
|
|
|
config HAS_FEATURE_ENHANCED_MSI
|
|
bool
|
|
default y if ARCH_LS1043A
|
|
|
|
menu "Layerscape PPA"
|
|
config FSL_LS_PPA
|
|
bool "FSL Layerscape PPA firmware support"
|
|
depends on !ARMV8_PSCI
|
|
select ARMV8_SEC_FIRMWARE_SUPPORT
|
|
select SEC_FIRMWARE_ARMV8_PSCI
|
|
select ARMV8_SEC_FIRMWARE_ERET_ADDR_REVERT if FSL_LSCH2
|
|
help
|
|
The FSL Primary Protected Application (PPA) is a software component
|
|
which is loaded during boot stage, and then remains resident in RAM
|
|
and runs in the TrustZone after boot.
|
|
Say y to enable it.
|
|
|
|
config SPL_FSL_LS_PPA
|
|
bool "FSL Layerscape PPA firmware support for SPL build"
|
|
depends on !ARMV8_PSCI
|
|
select SPL_ARMV8_SEC_FIRMWARE_SUPPORT
|
|
select SEC_FIRMWARE_ARMV8_PSCI
|
|
select ARMV8_SEC_FIRMWARE_ERET_ADDR_REVERT if FSL_LSCH2
|
|
help
|
|
The FSL Primary Protected Application (PPA) is a software component
|
|
which is loaded during boot stage, and then remains resident in RAM
|
|
and runs in the TrustZone after boot. This is to load PPA during SPL
|
|
stage instead of the RAM version of U-Boot. Once PPA is initialized,
|
|
the rest of U-Boot (including RAM version) runs at EL2.
|
|
choice
|
|
prompt "FSL Layerscape PPA firmware loading-media select"
|
|
depends on FSL_LS_PPA
|
|
default SYS_LS_PPA_FW_IN_MMC if SD_BOOT
|
|
default SYS_LS_PPA_FW_IN_NAND if NAND_BOOT
|
|
default SYS_LS_PPA_FW_IN_XIP
|
|
|
|
config SYS_LS_PPA_FW_IN_XIP
|
|
bool "XIP"
|
|
help
|
|
Say Y here if the PPA firmware locate at XIP flash, such
|
|
as NOR or QSPI flash.
|
|
|
|
config SYS_LS_PPA_FW_IN_MMC
|
|
bool "eMMC or SD Card"
|
|
help
|
|
Say Y here if the PPA firmware locate at eMMC/SD card.
|
|
|
|
config SYS_LS_PPA_FW_IN_NAND
|
|
bool "NAND"
|
|
help
|
|
Say Y here if the PPA firmware locate at NAND flash.
|
|
|
|
endchoice
|
|
|
|
config LS_PPA_ESBC_HDR_SIZE
|
|
hex "Length of PPA ESBC header"
|
|
depends on FSL_LS_PPA && CHAIN_OF_TRUST && !SYS_LS_PPA_FW_IN_XIP
|
|
default 0x2000
|
|
help
|
|
Length (in bytes) of PPA ESBC header to be copied from MMC/SD or
|
|
NAND to memory to validate PPA image.
|
|
|
|
endmenu
|
|
|
|
config SYS_FSL_ERRATUM_A008997
|
|
bool "Workaround for USB PHY erratum A008997"
|
|
|
|
config SYS_FSL_ERRATUM_A009007
|
|
bool
|
|
help
|
|
Workaround for USB PHY erratum A009007
|
|
|
|
config SYS_FSL_ERRATUM_A009008
|
|
bool "Workaround for USB PHY erratum A009008"
|
|
|
|
config SYS_FSL_ERRATUM_A009798
|
|
bool "Workaround for USB PHY erratum A009798"
|
|
|
|
config SYS_FSL_ERRATUM_A050106
|
|
bool "Workaround for USB PHY erratum A050106"
|
|
help
|
|
USB3.0 Receiver needs to enable fixed equalization
|
|
for each of PHY instances in an SOC. This is similar
|
|
to erratum A-009007, but this one is for LX2160A and LX2162A,
|
|
and the register value is different.
|
|
|
|
config SYS_FSL_ERRATUM_A010315
|
|
bool "Workaround for PCIe erratum A010315"
|
|
|
|
config SYS_FSL_ERRATUM_A010539
|
|
bool "Workaround for PIN MUX erratum A010539"
|
|
|
|
config MAX_CPUS
|
|
int "Maximum number of CPUs permitted for Layerscape"
|
|
default 2 if ARCH_LS1028A
|
|
default 4 if ARCH_LS1043A
|
|
default 4 if ARCH_LS1046A
|
|
default 16 if ARCH_LS2080A
|
|
default 8 if ARCH_LS1088A
|
|
default 16 if ARCH_LX2160A
|
|
default 16 if ARCH_LX2162A
|
|
default 1
|
|
help
|
|
Set this number to the maximum number of possible CPUs in the SoC.
|
|
SoCs may have multiple clusters with each cluster may have multiple
|
|
ports. If some ports are reserved but higher ports are used for
|
|
cores, count the reserved ports. This will allocate enough memory
|
|
in spin table to properly handle all cores.
|
|
|
|
config EMC2305
|
|
bool "Fan controller"
|
|
help
|
|
Enable the EMC2305 fan controller for configuration of fan
|
|
speed.
|
|
|
|
config NXP_ESBC
|
|
bool "NXP_ESBC"
|
|
help
|
|
Enable Freescale Secure Boot feature
|
|
|
|
config QSPI_AHB_INIT
|
|
bool "Init the QSPI AHB bus"
|
|
help
|
|
The default setting for QSPI AHB bus just support 3bytes addressing.
|
|
But some QSPI flash size up to 64MBytes, so initialize the QSPI AHB
|
|
bus for those flashes to support the full QSPI flash size.
|
|
|
|
config FSPI_AHB_EN_4BYTE
|
|
bool "Enable 4-byte Fast Read command for AHB mode"
|
|
default n
|
|
help
|
|
The default setting for FlexSPI AHB bus just supports 3-byte addressing.
|
|
But some FlexSPI flash sizes are up to 64MBytes.
|
|
This flag enables fast read command for AHB mode and modifies required
|
|
LUT to support full FlexSPI flash.
|
|
|
|
config SYS_CCI400_OFFSET
|
|
hex "Offset for CCI400 base"
|
|
depends on SYS_FSL_HAS_CCI400
|
|
default 0x3090000 if ARCH_LS1088A || ARCH_LS1028A
|
|
default 0x180000 if FSL_LSCH2
|
|
help
|
|
Offset for CCI400 base
|
|
CCI400 base addr = CCSRBAR + CCI400_OFFSET
|
|
|
|
config SYS_FSL_IFC_BANK_COUNT
|
|
int "Maximum banks of Integrated flash controller"
|
|
depends on ARCH_LS1043A || ARCH_LS1046A || ARCH_LS2080A || ARCH_LS1088A
|
|
default 4 if ARCH_LS1043A
|
|
default 4 if ARCH_LS1046A
|
|
default 8 if ARCH_LS2080A || ARCH_LS1088A
|
|
|
|
config SYS_FSL_HAS_CCI400
|
|
bool
|
|
|
|
config SYS_FSL_HAS_CCN504
|
|
bool
|
|
|
|
config SYS_FSL_HAS_CCN508
|
|
bool
|
|
|
|
config SYS_FSL_HAS_DP_DDR
|
|
bool
|
|
|
|
config SYS_FSL_SRDS_1
|
|
bool
|
|
|
|
config SYS_FSL_SRDS_2
|
|
bool
|
|
|
|
config SYS_NXP_SRDS_3
|
|
bool
|
|
|
|
config SYS_HAS_SERDES
|
|
bool
|
|
|
|
config FSL_TZASC_1
|
|
bool
|
|
|
|
config FSL_TZASC_2
|
|
bool
|
|
|
|
config FSL_TZASC_400
|
|
bool
|
|
|
|
config FSL_TZPC_BP147
|
|
bool
|
|
endmenu
|
|
|
|
menu "Layerscape clock tree configuration"
|
|
depends on FSL_LSCH2 || FSL_LSCH3
|
|
|
|
config SYS_FSL_CLK
|
|
bool "Enable clock tree initialization"
|
|
default y
|
|
|
|
config CLUSTER_CLK_FREQ
|
|
int "Reference clock of core cluster"
|
|
depends on ARCH_LS1012A
|
|
default 100000000
|
|
help
|
|
This number is the reference clock frequency of core PLL.
|
|
For most platforms, the core PLL and Platform PLL have the same
|
|
reference clock, but for some platforms, LS1012A for instance,
|
|
they are provided sepatately.
|
|
|
|
config SYS_FSL_PCLK_DIV
|
|
int "Platform clock divider"
|
|
default 1 if ARCH_LS1028A
|
|
default 1 if ARCH_LS1043A
|
|
default 1 if ARCH_LS1046A
|
|
default 1 if ARCH_LS1088A
|
|
default 2
|
|
help
|
|
This is the divider that is used to derive Platform clock from
|
|
Platform PLL, in another word:
|
|
Platform_clk = Platform_PLL_freq / this_divider
|
|
|
|
config SYS_FSL_DSPI_CLK_DIV
|
|
int "DSPI clock divider"
|
|
default 1 if ARCH_LS1043A
|
|
default 2
|
|
help
|
|
This is the divider that is used to derive DSPI clock from Platform
|
|
clock, in another word DSPI_clk = Platform_clk / this_divider.
|
|
|
|
config SYS_FSL_DUART_CLK_DIV
|
|
int "DUART clock divider"
|
|
default 1 if ARCH_LS1043A
|
|
default 4 if ARCH_LX2160A
|
|
default 4 if ARCH_LX2162A
|
|
default 2
|
|
help
|
|
This is the divider that is used to derive DUART clock from Platform
|
|
clock, in another word DUART_clk = Platform_clk / this_divider.
|
|
|
|
config SYS_FSL_I2C_CLK_DIV
|
|
int "I2C clock divider"
|
|
default 1 if ARCH_LS1043A
|
|
default 4 if ARCH_LS1012A
|
|
default 4 if ARCH_LS1028A
|
|
default 8 if ARCH_LX2160A
|
|
default 8 if ARCH_LX2162A
|
|
default 8 if ARCH_LS1088A
|
|
default 2
|
|
help
|
|
This is the divider that is used to derive I2C clock from Platform
|
|
clock, in another word I2C_clk = Platform_clk / this_divider.
|
|
|
|
config SYS_FSL_IFC_CLK_DIV
|
|
int "IFC clock divider"
|
|
default 1 if ARCH_LS1043A
|
|
default 4 if ARCH_LS1012A
|
|
default 4 if ARCH_LS1028A
|
|
default 8 if ARCH_LX2160A
|
|
default 8 if ARCH_LX2162A
|
|
default 8 if ARCH_LS1088A
|
|
default 2
|
|
help
|
|
This is the divider that is used to derive IFC clock from Platform
|
|
clock, in another word IFC_clk = Platform_clk / this_divider.
|
|
|
|
config SYS_FSL_LPUART_CLK_DIV
|
|
int "LPUART clock divider"
|
|
default 1 if ARCH_LS1043A
|
|
default 2
|
|
help
|
|
This is the divider that is used to derive LPUART clock from Platform
|
|
clock, in another word LPUART_clk = Platform_clk / this_divider.
|
|
|
|
config SYS_FSL_SDHC_CLK_DIV
|
|
int "SDHC clock divider"
|
|
default 1 if ARCH_LS1043A
|
|
default 1 if ARCH_LS1012A
|
|
default 2
|
|
help
|
|
This is the divider that is used to derive SDHC clock from Platform
|
|
clock, in another word SDHC_clk = Platform_clk / this_divider.
|
|
|
|
config SYS_FSL_QMAN_CLK_DIV
|
|
int "QMAN clock divider"
|
|
default 1 if ARCH_LS1043A
|
|
default 2
|
|
help
|
|
This is the divider that is used to derive QMAN clock from Platform
|
|
clock, in another word QMAN_clk = Platform_clk / this_divider.
|
|
endmenu
|
|
|
|
config RESV_RAM
|
|
bool
|
|
help
|
|
Reserve memory from the top, tracked by gd->arch.resv_ram. This
|
|
reserved RAM can be used by special driver that resides in memory
|
|
after U-Boot exits. It's up to implementation to allocate and allow
|
|
access to this reserved memory. For example, the reserved RAM can
|
|
be at the high end of physical memory. The reserve RAM may be
|
|
excluded from memory bank(s) passed to OS, or marked as reserved.
|
|
|
|
config SYS_FSL_EC1
|
|
bool
|
|
help
|
|
Ethernet controller 1, this is connected to
|
|
MAC17 for LX2160A and LX2162A or to MAC3 for other SoCs
|
|
Provides DPAA2 capabilities
|
|
|
|
config SYS_FSL_EC2
|
|
bool
|
|
help
|
|
Ethernet controller 2, this is connected to
|
|
MAC18 for LX2160A and LX2162A or to MAC4 for other SoCs
|
|
Provides DPAA2 capabilities
|
|
|
|
config SYS_FSL_ERRATUM_A008336
|
|
bool
|
|
|
|
config SYS_FSL_ERRATUM_A008514
|
|
bool
|
|
|
|
config SYS_FSL_ERRATUM_A008585
|
|
bool
|
|
|
|
config SYS_FSL_ERRATUM_A008850
|
|
bool
|
|
|
|
config SYS_FSL_ERRATUM_A009203
|
|
bool
|
|
|
|
config SYS_FSL_ERRATUM_A009635
|
|
bool
|
|
|
|
config SYS_FSL_ERRATUM_A009660
|
|
bool
|
|
|
|
config SYS_FSL_ERRATUM_A050382
|
|
bool
|
|
|
|
config SYS_FSL_HAS_RGMII
|
|
bool
|
|
depends on SYS_FSL_EC1 || SYS_FSL_EC2
|
|
|
|
config SPL_LDSCRIPT
|
|
default "arch/arm/cpu/armv8/u-boot-spl.lds" if ARCH_LS1043A || ARCH_LS1046A || ARCH_LS2080A
|
|
|
|
config HAS_FSL_XHCI_USB
|
|
bool
|
|
default y if ARCH_LS1043A || ARCH_LS1046A
|
|
help
|
|
For some SoC(such as LS1043A and LS1046A), USB and QE-HDLC multiplex use
|
|
pins, select it when the pins are assigned to USB.
|