mirror of
https://github.com/AsahiLinux/u-boot
synced 2024-11-11 07:34:31 +00:00
6705d81e90
Replaced hardcoded PL011 clock frequency with config variable. Fixed wrong CONFIG_CMD_DFL doc. * Patch by Thomas Viehweger, 09 Jun 2004: make it possible to remove chpart when there is only one partition
271 lines
9.6 KiB
C
271 lines
9.6 KiB
C
/*
|
|
* (C) Copyright 2003
|
|
* Texas Instruments.
|
|
* Kshitij Gupta <kshitij@ti.com>
|
|
* Configuation settings for the TI OMAP Innovator board.
|
|
*
|
|
* (C) Copyright 2004
|
|
* ARM Ltd.
|
|
* Philippe Robin, <philippe.robin@arm.com>
|
|
* Configuration for Integrator AP board.
|
|
*.
|
|
* See file CREDITS for list of people who contributed to this
|
|
* project.
|
|
*
|
|
* This program is free software; you can redistribute it and/or
|
|
* modify it under the terms of the GNU General Public License as
|
|
* published by the Free Software Foundation; either version 2 of
|
|
* the License, or (at your option) any later version.
|
|
*
|
|
* This program is distributed in the hope that it will be useful,
|
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
* GNU General Public License for more details.
|
|
*
|
|
* You should have received a copy of the GNU General Public License
|
|
* along with this program; if not, write to the Free Software
|
|
* Foundation, Inc., 59 Temple Place, Suite 330, Boston,
|
|
* MA 02111-1307 USA
|
|
*/
|
|
|
|
#ifndef __CONFIG_H
|
|
#define __CONFIG_H
|
|
|
|
/*
|
|
* High Level Configuration Options
|
|
* (easy to change)
|
|
*/
|
|
#define CONFIG_ARM926EJS 1 /* This is an arm926ejs CPU core */
|
|
#define CONFIG_INTEGRATOR 1 /* in an Integrator board */
|
|
#define CONFIG_ARCH_CINTEGRATOR 1 /* Specifically, a CP */
|
|
|
|
|
|
#define CFG_MEMTEST_START 0x100000
|
|
#define CFG_MEMTEST_END 0x10000000
|
|
#define CFG_HZ (1000000 / 256) /* Timer 1 is clocked at 1Mhz, with 256 divider */
|
|
#define CFG_TIMERBASE 0x13000100
|
|
|
|
#define CONFIG_CMDLINE_TAG 1 /* enable passing of ATAGs */
|
|
#define CONFIG_SETUP_MEMORY_TAGS 1
|
|
#define CONFIG_MISC_INIT_R 1 /* call misc_init_r during start up */
|
|
/*
|
|
* Size of malloc() pool
|
|
*/
|
|
#define CFG_MALLOC_LEN (CFG_ENV_SIZE + 128*1024)
|
|
#define CFG_GBL_DATA_SIZE 128 /* size in bytes reserved for initial data */
|
|
|
|
/*
|
|
* PL010 Configuration
|
|
*/
|
|
#define CFG_PL010_SERIAL
|
|
#define CONFIG_CONS_INDEX 0
|
|
#define CONFIG_BAUDRATE 38400
|
|
#define CONFIG_PL01x_PORTS { (void *) (CFG_SERIAL0), (void *) (CFG_SERIAL1) }
|
|
#define CFG_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 }
|
|
#define CFG_SERIAL0 0x16000000
|
|
#define CFG_SERIAL1 0x17000000
|
|
|
|
/*#define CONFIG_COMMANDS (CFG_CMD_DHCP | CFG_CMD_IMI | CFG_CMD_NET | CFG_CMD_PING | CFG_CMD_BDI | CFG_CMD_PCI) */
|
|
/*#define CONFIG_NET_MULTI */
|
|
/*#define CONFIG_BOOTP_MASK CONFIG_BOOTP_DEFAULT */
|
|
|
|
#define CONFIG_COMMANDS (CFG_CMD_IMI | CFG_CMD_BDI | CFG_CMD_MEMORY)
|
|
|
|
|
|
/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */
|
|
#include <cmd_confdefs.h>
|
|
|
|
#define CONFIG_BOOTDELAY 2
|
|
#define CONFIG_BOOTARGS "root=/dev/mtdblock0 mem=32M console=ttyAM0 console=tty"
|
|
#define CONFIG_BOOTCOMMAND ""
|
|
|
|
/*
|
|
* Miscellaneous configurable options
|
|
*/
|
|
#define CFG_LONGHELP /* undef to save memory */
|
|
#define CFG_PROMPT "Integrator-AP # " /* Monitor Command Prompt */
|
|
#define CFG_CBSIZE 256 /* Console I/O Buffer Size */
|
|
/* Print Buffer Size */
|
|
#define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16)
|
|
#define CFG_MAXARGS 16 /* max number of command args */
|
|
#define CFG_BARGSIZE CFG_CBSIZE /* Boot Argument Buffer Size */
|
|
|
|
#undef CFG_CLKS_IN_HZ /* everything, incl board info, in Hz */
|
|
#define CFG_LOAD_ADDR 0x7fc0 /* default load address */
|
|
|
|
/*-----------------------------------------------------------------------
|
|
* Stack sizes
|
|
*
|
|
* The stack sizes are set up in start.S using the settings below
|
|
*/
|
|
#define CONFIG_STACKSIZE (128*1024) /* regular stack */
|
|
#ifdef CONFIG_USE_IRQ
|
|
#define CONFIG_STACKSIZE_IRQ (4*1024) /* IRQ stack */
|
|
#define CONFIG_STACKSIZE_FIQ (4*1024) /* FIQ stack */
|
|
#endif
|
|
|
|
/*-----------------------------------------------------------------------
|
|
* Physical Memory Map
|
|
*/
|
|
#define CONFIG_NR_DRAM_BANKS 1 /* we have 1 bank of DRAM */
|
|
#define PHYS_SDRAM_1 0x00000000 /* SDRAM Bank #1 */
|
|
#define PHYS_SDRAM_1_SIZE 0x02000000 /* 32 MB */
|
|
|
|
#define CFG_FLASH_BASE 0x24000000
|
|
|
|
/*-----------------------------------------------------------------------
|
|
* FLASH and environment organization
|
|
*/
|
|
#define CFG_ENV_IS_NOWHERE
|
|
#define CFG_MAX_FLASH_BANKS 1 /* max number of memory banks */
|
|
#define PHYS_FLASH_SIZE 0x01000000 /* 16MB */
|
|
/* timeout values are in ticks */
|
|
#define CFG_FLASH_ERASE_TOUT (20*CFG_HZ) /* Timeout for Flash Erase */
|
|
#define CFG_FLASH_WRITE_TOUT (20*CFG_HZ) /* Timeout for Flash Write */
|
|
#define CFG_MAX_FLASH_SECT 128
|
|
#define CFG_ENV_SIZE 32768
|
|
|
|
#define PHYS_FLASH_1 (CFG_FLASH_BASE)
|
|
|
|
/*-----------------------------------------------------------------------
|
|
* PCI definitions
|
|
*/
|
|
|
|
/*#define CONFIG_PCI /--* include pci support */
|
|
#undef CONFIG_PCI_PNP
|
|
#define CONFIG_PCI_SCAN_SHOW 1 /* show pci devices on startup */
|
|
#define DEBUG
|
|
|
|
#define CONFIG_EEPRO100
|
|
#define CFG_RX_ETH_BUFFER 8 /* use 8 rx buffer on eepro100 */
|
|
|
|
|
|
#define INTEGRATOR_BOOT_ROM_BASE 0x20000000
|
|
#define INTEGRATOR_HDR0_SDRAM_BASE 0x80000000
|
|
|
|
/* PCI Base area */
|
|
#define INTEGRATOR_PCI_BASE 0x40000000
|
|
#define INTEGRATOR_PCI_SIZE 0x3FFFFFFF
|
|
|
|
/* memory map as seen by the CPU on the local bus */
|
|
#define CPU_PCI_IO_ADRS 0x60000000 /* PCI I/O space base */
|
|
#define CPU_PCI_IO_SIZE 0x10000
|
|
|
|
#define CPU_PCI_CNFG_ADRS 0x61000000 /* PCI config space */
|
|
#define CPU_PCI_CNFG_SIZE 0x1000000
|
|
|
|
#define PCI_MEM_BASE 0x40000000 /* 512M to xxx */
|
|
/* unused 256M from A0000000-AFFFFFFF might be used for I2O ??? */
|
|
#define INTEGRATOR_PCI_IO_BASE 0x60000000 /* 16M to xxx */
|
|
/* unused (128-16)M from B1000000-B7FFFFFF */
|
|
#define PCI_CONFIG_BASE 0x61000000 /* 16M to xxx */
|
|
/* unused ((128-16)M - 64K) from XXX */
|
|
|
|
#define PCI_V3_BASE 0x62000000
|
|
|
|
/* V3 PCI bridge controller */
|
|
#define V3_BASE 0x62000000 /* V360EPC registers */
|
|
|
|
#define PCI_ENET0_IOADDR (CPU_PCI_IO_ADRS)
|
|
#define PCI_ENET0_MEMADDR (PCI_MEM_BASE)
|
|
|
|
|
|
#define V3_PCI_VENDOR 0x00000000
|
|
#define V3_PCI_DEVICE 0x00000002
|
|
#define V3_PCI_CMD 0x00000004
|
|
#define V3_PCI_STAT 0x00000006
|
|
#define V3_PCI_CC_REV 0x00000008
|
|
#define V3_PCI_HDR_CF 0x0000000C
|
|
#define V3_PCI_IO_BASE 0x00000010
|
|
#define V3_PCI_BASE0 0x00000014
|
|
#define V3_PCI_BASE1 0x00000018
|
|
#define V3_PCI_SUB_VENDOR 0x0000002C
|
|
#define V3_PCI_SUB_ID 0x0000002E
|
|
#define V3_PCI_ROM 0x00000030
|
|
#define V3_PCI_BPARAM 0x0000003C
|
|
#define V3_PCI_MAP0 0x00000040
|
|
#define V3_PCI_MAP1 0x00000044
|
|
#define V3_PCI_INT_STAT 0x00000048
|
|
#define V3_PCI_INT_CFG 0x0000004C
|
|
#define V3_LB_BASE0 0x00000054
|
|
#define V3_LB_BASE1 0x00000058
|
|
#define V3_LB_MAP0 0x0000005E
|
|
#define V3_LB_MAP1 0x00000062
|
|
#define V3_LB_BASE2 0x00000064
|
|
#define V3_LB_MAP2 0x00000066
|
|
#define V3_LB_SIZE 0x00000068
|
|
#define V3_LB_IO_BASE 0x0000006E
|
|
#define V3_FIFO_CFG 0x00000070
|
|
#define V3_FIFO_PRIORITY 0x00000072
|
|
#define V3_FIFO_STAT 0x00000074
|
|
#define V3_LB_ISTAT 0x00000076
|
|
#define V3_LB_IMASK 0x00000077
|
|
#define V3_SYSTEM 0x00000078
|
|
#define V3_LB_CFG 0x0000007A
|
|
#define V3_PCI_CFG 0x0000007C
|
|
#define V3_DMA_PCI_ADR0 0x00000080
|
|
#define V3_DMA_PCI_ADR1 0x00000090
|
|
#define V3_DMA_LOCAL_ADR0 0x00000084
|
|
#define V3_DMA_LOCAL_ADR1 0x00000094
|
|
#define V3_DMA_LENGTH0 0x00000088
|
|
#define V3_DMA_LENGTH1 0x00000098
|
|
#define V3_DMA_CSR0 0x0000008B
|
|
#define V3_DMA_CSR1 0x0000009B
|
|
#define V3_DMA_CTLB_ADR0 0x0000008C
|
|
#define V3_DMA_CTLB_ADR1 0x0000009C
|
|
#define V3_DMA_DELAY 0x000000E0
|
|
#define V3_MAIL_DATA 0x000000C0
|
|
#define V3_PCI_MAIL_IEWR 0x000000D0
|
|
#define V3_PCI_MAIL_IERD 0x000000D2
|
|
#define V3_LB_MAIL_IEWR 0x000000D4
|
|
#define V3_LB_MAIL_IERD 0x000000D6
|
|
#define V3_MAIL_WR_STAT 0x000000D8
|
|
#define V3_MAIL_RD_STAT 0x000000DA
|
|
#define V3_QBA_MAP 0x000000DC
|
|
|
|
/* SYSTEM register bits */
|
|
#define V3_SYSTEM_M_RST_OUT (1 << 15)
|
|
#define V3_SYSTEM_M_LOCK (1 << 14)
|
|
|
|
/* PCI_CFG bits */
|
|
#define V3_PCI_CFG_M_RETRY_EN (1 << 10)
|
|
#define V3_PCI_CFG_M_AD_LOW1 (1 << 9)
|
|
#define V3_PCI_CFG_M_AD_LOW0 (1 << 8)
|
|
|
|
/* PCI MAP register bits (PCI -> Local bus) */
|
|
#define V3_PCI_MAP_M_MAP_ADR 0xFFF00000
|
|
#define V3_PCI_MAP_M_RD_POST_INH (1 << 15)
|
|
#define V3_PCI_MAP_M_ROM_SIZE (1 << 11 | 1 << 10)
|
|
#define V3_PCI_MAP_M_SWAP (1 << 9 | 1 << 8)
|
|
#define V3_PCI_MAP_M_ADR_SIZE 0x000000F0
|
|
#define V3_PCI_MAP_M_REG_EN (1 << 1)
|
|
#define V3_PCI_MAP_M_ENABLE (1 << 0)
|
|
|
|
/* 9 => 512M window size */
|
|
#define V3_PCI_MAP_M_ADR_SIZE_512M 0x00000090
|
|
|
|
/* A => 1024M window size */
|
|
#define V3_PCI_MAP_M_ADR_SIZE_1024M 0x000000A0
|
|
|
|
/* LB_BASE register bits (Local bus -> PCI) */
|
|
#define V3_LB_BASE_M_MAP_ADR 0xFFF00000
|
|
#define V3_LB_BASE_M_SWAP (1 << 8 | 1 << 9)
|
|
#define V3_LB_BASE_M_ADR_SIZE 0x000000F0
|
|
#define V3_LB_BASE_M_PREFETCH (1 << 3)
|
|
#define V3_LB_BASE_M_ENABLE (1 << 0)
|
|
|
|
/* PCI COMMAND REGISTER bits */
|
|
#define V3_COMMAND_M_FBB_EN (1 << 9)
|
|
#define V3_COMMAND_M_SERR_EN (1 << 8)
|
|
#define V3_COMMAND_M_PAR_EN (1 << 6)
|
|
#define V3_COMMAND_M_MASTER_EN (1 << 2)
|
|
#define V3_COMMAND_M_MEM_EN (1 << 1)
|
|
#define V3_COMMAND_M_IO_EN (1 << 0)
|
|
|
|
#define INTEGRATOR_SC_BASE 0x11000000
|
|
#define INTEGRATOR_SC_PCIENABLE_OFFSET 0x18
|
|
#define INTEGRATOR_SC_PCIENABLE \
|
|
(INTEGRATOR_SC_BASE + INTEGRATOR_SC_PCIENABLE_OFFSET)
|
|
|
|
|
|
#endif /* __CONFIG_H */
|