mirror of
https://github.com/AsahiLinux/u-boot
synced 2024-11-15 17:28:15 +00:00
b1b147f2b8
This patch modify the loop in mtd erase command to erase one by one the blocks in the requested area. It solves issue on "mtd erase" command on nand with existing bad block, the command is interrupted on the first bad block with the trace: "Skipping bad block at 0xffffffffffffffff" In MTD driver (nand/raw), when a bad block is present on the MTD device, the erase_op.fail_addr is not updated and we have the initial value MTD_FAIL_ADDR_UNKNOWN = (ULL)-1. This case seems normal in nand_base.c:nand_erase_nand(), we have the 2 exit cases during the loop: 1/ we have a bad block (nand_block_checkbad) instr->state = MTD_ERASE_FAILED loop interrupted (goto erase_exit) 2/ if block erase failed (status & NAND_STATUS_FAIL) instr->state = MTD_ERASE_FAILED; instr->fail_addr = ((loff_t)page << chip->page_shift); loop interrupted (goto erase_exit) So erase_op.fail_addr can't be used if bad blocks were present in the erased area; we need to use mtd_erase only one block to detect and skip these existing bad blocks (as it is done in nand_util.c). Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com> Reviewed-by: Miquel Raynal <miquel.raynal@bootlin.com>
558 lines
13 KiB
C
558 lines
13 KiB
C
// SPDX-License-Identifier: GPL-2.0+
|
|
/*
|
|
* mtd.c
|
|
*
|
|
* Generic command to handle basic operations on any memory device.
|
|
*
|
|
* Copyright: Bootlin, 2018
|
|
* Author: Miquèl Raynal <miquel.raynal@bootlin.com>
|
|
*/
|
|
|
|
#include <command.h>
|
|
#include <common.h>
|
|
#include <console.h>
|
|
#include <malloc.h>
|
|
#include <mapmem.h>
|
|
#include <mtd.h>
|
|
|
|
#include <linux/ctype.h>
|
|
|
|
static struct mtd_info *get_mtd_by_name(const char *name)
|
|
{
|
|
struct mtd_info *mtd;
|
|
|
|
mtd_probe_devices();
|
|
|
|
mtd = get_mtd_device_nm(name);
|
|
if (IS_ERR_OR_NULL(mtd))
|
|
printf("MTD device %s not found, ret %ld\n", name,
|
|
PTR_ERR(mtd));
|
|
|
|
return mtd;
|
|
}
|
|
|
|
static uint mtd_len_to_pages(struct mtd_info *mtd, u64 len)
|
|
{
|
|
do_div(len, mtd->writesize);
|
|
|
|
return len;
|
|
}
|
|
|
|
static bool mtd_is_aligned_with_min_io_size(struct mtd_info *mtd, u64 size)
|
|
{
|
|
return !do_div(size, mtd->writesize);
|
|
}
|
|
|
|
static bool mtd_is_aligned_with_block_size(struct mtd_info *mtd, u64 size)
|
|
{
|
|
return !do_div(size, mtd->erasesize);
|
|
}
|
|
|
|
static void mtd_dump_buf(const u8 *buf, uint len, uint offset)
|
|
{
|
|
int i, j;
|
|
|
|
for (i = 0; i < len; ) {
|
|
printf("0x%08x:\t", offset + i);
|
|
for (j = 0; j < 8; j++)
|
|
printf("%02x ", buf[i + j]);
|
|
printf(" ");
|
|
i += 8;
|
|
for (j = 0; j < 8; j++)
|
|
printf("%02x ", buf[i + j]);
|
|
printf("\n");
|
|
i += 8;
|
|
}
|
|
}
|
|
|
|
static void mtd_dump_device_buf(struct mtd_info *mtd, u64 start_off,
|
|
const u8 *buf, u64 len, bool woob)
|
|
{
|
|
bool has_pages = mtd->type == MTD_NANDFLASH ||
|
|
mtd->type == MTD_MLCNANDFLASH;
|
|
int npages = mtd_len_to_pages(mtd, len);
|
|
uint page;
|
|
|
|
if (has_pages) {
|
|
for (page = 0; page < npages; page++) {
|
|
u64 data_off = page * mtd->writesize;
|
|
|
|
printf("\nDump %d data bytes from 0x%08llx:\n",
|
|
mtd->writesize, start_off + data_off);
|
|
mtd_dump_buf(&buf[data_off],
|
|
mtd->writesize, start_off + data_off);
|
|
|
|
if (woob) {
|
|
u64 oob_off = page * mtd->oobsize;
|
|
|
|
printf("Dump %d OOB bytes from page at 0x%08llx:\n",
|
|
mtd->oobsize, start_off + data_off);
|
|
mtd_dump_buf(&buf[len + oob_off],
|
|
mtd->oobsize, 0);
|
|
}
|
|
}
|
|
} else {
|
|
printf("\nDump %lld data bytes from 0x%llx:\n",
|
|
len, start_off);
|
|
mtd_dump_buf(buf, len, start_off);
|
|
}
|
|
}
|
|
|
|
static void mtd_show_parts(struct mtd_info *mtd, int level)
|
|
{
|
|
struct mtd_info *part;
|
|
int i;
|
|
|
|
list_for_each_entry(part, &mtd->partitions, node) {
|
|
for (i = 0; i < level; i++)
|
|
printf("\t");
|
|
printf(" - 0x%012llx-0x%012llx : \"%s\"\n",
|
|
part->offset, part->offset + part->size, part->name);
|
|
|
|
mtd_show_parts(part, level + 1);
|
|
}
|
|
}
|
|
|
|
static void mtd_show_device(struct mtd_info *mtd)
|
|
{
|
|
/* Device */
|
|
printf("* %s\n", mtd->name);
|
|
#if defined(CONFIG_DM)
|
|
if (mtd->dev) {
|
|
printf(" - device: %s\n", mtd->dev->name);
|
|
printf(" - parent: %s\n", mtd->dev->parent->name);
|
|
printf(" - driver: %s\n", mtd->dev->driver->name);
|
|
}
|
|
#endif
|
|
|
|
/* MTD device information */
|
|
printf(" - type: ");
|
|
switch (mtd->type) {
|
|
case MTD_RAM:
|
|
printf("RAM\n");
|
|
break;
|
|
case MTD_ROM:
|
|
printf("ROM\n");
|
|
break;
|
|
case MTD_NORFLASH:
|
|
printf("NOR flash\n");
|
|
break;
|
|
case MTD_NANDFLASH:
|
|
printf("NAND flash\n");
|
|
break;
|
|
case MTD_DATAFLASH:
|
|
printf("Data flash\n");
|
|
break;
|
|
case MTD_UBIVOLUME:
|
|
printf("UBI volume\n");
|
|
break;
|
|
case MTD_MLCNANDFLASH:
|
|
printf("MLC NAND flash\n");
|
|
break;
|
|
case MTD_ABSENT:
|
|
default:
|
|
printf("Unknown\n");
|
|
break;
|
|
}
|
|
|
|
printf(" - block size: 0x%x bytes\n", mtd->erasesize);
|
|
printf(" - min I/O: 0x%x bytes\n", mtd->writesize);
|
|
|
|
if (mtd->oobsize) {
|
|
printf(" - OOB size: %u bytes\n", mtd->oobsize);
|
|
printf(" - OOB available: %u bytes\n", mtd->oobavail);
|
|
}
|
|
|
|
if (mtd->ecc_strength) {
|
|
printf(" - ECC strength: %u bits\n", mtd->ecc_strength);
|
|
printf(" - ECC step size: %u bytes\n", mtd->ecc_step_size);
|
|
printf(" - bitflip threshold: %u bits\n",
|
|
mtd->bitflip_threshold);
|
|
}
|
|
|
|
printf(" - 0x%012llx-0x%012llx : \"%s\"\n",
|
|
mtd->offset, mtd->offset + mtd->size, mtd->name);
|
|
|
|
/* MTD partitions, if any */
|
|
mtd_show_parts(mtd, 1);
|
|
}
|
|
|
|
/* Logic taken from fs/ubifs/recovery.c:is_empty() */
|
|
static bool mtd_oob_write_is_empty(struct mtd_oob_ops *op)
|
|
{
|
|
int i;
|
|
|
|
for (i = 0; i < op->len; i++)
|
|
if (op->datbuf[i] != 0xff)
|
|
return false;
|
|
|
|
for (i = 0; i < op->ooblen; i++)
|
|
if (op->oobbuf[i] != 0xff)
|
|
return false;
|
|
|
|
return true;
|
|
}
|
|
|
|
static int do_mtd_list(cmd_tbl_t *cmdtp, int flag, int argc,
|
|
char * const argv[])
|
|
{
|
|
struct mtd_info *mtd;
|
|
int dev_nb = 0;
|
|
|
|
/* Ensure all devices (and their partitions) are probed */
|
|
mtd_probe_devices();
|
|
|
|
printf("List of MTD devices:\n");
|
|
mtd_for_each_device(mtd) {
|
|
if (!mtd_is_partition(mtd))
|
|
mtd_show_device(mtd);
|
|
|
|
dev_nb++;
|
|
}
|
|
|
|
if (!dev_nb) {
|
|
printf("No MTD device found\n");
|
|
return CMD_RET_FAILURE;
|
|
}
|
|
|
|
return CMD_RET_SUCCESS;
|
|
}
|
|
|
|
static int mtd_special_write_oob(struct mtd_info *mtd, u64 off,
|
|
struct mtd_oob_ops *io_op,
|
|
bool write_empty_pages, bool woob)
|
|
{
|
|
int ret = 0;
|
|
|
|
/*
|
|
* By default, do not write an empty page.
|
|
* Skip it by simulating a successful write.
|
|
*/
|
|
if (!write_empty_pages && mtd_oob_write_is_empty(io_op)) {
|
|
io_op->retlen = mtd->writesize;
|
|
io_op->oobretlen = woob ? mtd->oobsize : 0;
|
|
} else {
|
|
ret = mtd_write_oob(mtd, off, io_op);
|
|
}
|
|
|
|
return ret;
|
|
}
|
|
|
|
static int do_mtd_io(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
|
|
{
|
|
bool dump, read, raw, woob, write_empty_pages, has_pages = false;
|
|
u64 start_off, off, len, remaining, default_len;
|
|
struct mtd_oob_ops io_op = {};
|
|
uint user_addr = 0, npages;
|
|
const char *cmd = argv[0];
|
|
struct mtd_info *mtd;
|
|
u32 oob_len;
|
|
u8 *buf;
|
|
int ret;
|
|
|
|
if (argc < 2)
|
|
return CMD_RET_USAGE;
|
|
|
|
mtd = get_mtd_by_name(argv[1]);
|
|
if (IS_ERR_OR_NULL(mtd))
|
|
return CMD_RET_FAILURE;
|
|
|
|
if (mtd->type == MTD_NANDFLASH || mtd->type == MTD_MLCNANDFLASH)
|
|
has_pages = true;
|
|
|
|
dump = !strncmp(cmd, "dump", 4);
|
|
read = dump || !strncmp(cmd, "read", 4);
|
|
raw = strstr(cmd, ".raw");
|
|
woob = strstr(cmd, ".oob");
|
|
write_empty_pages = !has_pages || strstr(cmd, ".dontskipff");
|
|
|
|
argc -= 2;
|
|
argv += 2;
|
|
|
|
if (!dump) {
|
|
if (!argc) {
|
|
ret = CMD_RET_USAGE;
|
|
goto out_put_mtd;
|
|
}
|
|
|
|
user_addr = simple_strtoul(argv[0], NULL, 16);
|
|
argc--;
|
|
argv++;
|
|
}
|
|
|
|
start_off = argc > 0 ? simple_strtoul(argv[0], NULL, 16) : 0;
|
|
if (!mtd_is_aligned_with_min_io_size(mtd, start_off)) {
|
|
printf("Offset not aligned with a page (0x%x)\n",
|
|
mtd->writesize);
|
|
ret = CMD_RET_FAILURE;
|
|
goto out_put_mtd;
|
|
}
|
|
|
|
default_len = dump ? mtd->writesize : mtd->size;
|
|
len = argc > 1 ? simple_strtoul(argv[1], NULL, 16) : default_len;
|
|
if (!mtd_is_aligned_with_min_io_size(mtd, len)) {
|
|
len = round_up(len, mtd->writesize);
|
|
printf("Size not on a page boundary (0x%x), rounding to 0x%llx\n",
|
|
mtd->writesize, len);
|
|
}
|
|
|
|
remaining = len;
|
|
npages = mtd_len_to_pages(mtd, len);
|
|
oob_len = woob ? npages * mtd->oobsize : 0;
|
|
|
|
if (dump)
|
|
buf = kmalloc(len + oob_len, GFP_KERNEL);
|
|
else
|
|
buf = map_sysmem(user_addr, 0);
|
|
|
|
if (!buf) {
|
|
printf("Could not map/allocate the user buffer\n");
|
|
ret = CMD_RET_FAILURE;
|
|
goto out_put_mtd;
|
|
}
|
|
|
|
if (has_pages)
|
|
printf("%s %lld byte(s) (%d page(s)) at offset 0x%08llx%s%s%s\n",
|
|
read ? "Reading" : "Writing", len, npages, start_off,
|
|
raw ? " [raw]" : "", woob ? " [oob]" : "",
|
|
!read && write_empty_pages ? " [dontskipff]" : "");
|
|
else
|
|
printf("%s %lld byte(s) at offset 0x%08llx\n",
|
|
read ? "Reading" : "Writing", len, start_off);
|
|
|
|
io_op.mode = raw ? MTD_OPS_RAW : MTD_OPS_AUTO_OOB;
|
|
io_op.len = has_pages ? mtd->writesize : len;
|
|
io_op.ooblen = woob ? mtd->oobsize : 0;
|
|
io_op.datbuf = buf;
|
|
io_op.oobbuf = woob ? &buf[len] : NULL;
|
|
|
|
/* Search for the first good block after the given offset */
|
|
off = start_off;
|
|
while (mtd_block_isbad(mtd, off))
|
|
off += mtd->erasesize;
|
|
|
|
/* Loop over the pages to do the actual read/write */
|
|
while (remaining) {
|
|
/* Skip the block if it is bad */
|
|
if (mtd_is_aligned_with_block_size(mtd, off) &&
|
|
mtd_block_isbad(mtd, off)) {
|
|
off += mtd->erasesize;
|
|
continue;
|
|
}
|
|
|
|
if (read)
|
|
ret = mtd_read_oob(mtd, off, &io_op);
|
|
else
|
|
ret = mtd_special_write_oob(mtd, off, &io_op,
|
|
write_empty_pages, woob);
|
|
|
|
if (ret) {
|
|
printf("Failure while %s at offset 0x%llx\n",
|
|
read ? "reading" : "writing", off);
|
|
break;
|
|
}
|
|
|
|
off += io_op.retlen;
|
|
remaining -= io_op.retlen;
|
|
io_op.datbuf += io_op.retlen;
|
|
io_op.oobbuf += io_op.oobretlen;
|
|
}
|
|
|
|
if (!ret && dump)
|
|
mtd_dump_device_buf(mtd, start_off, buf, len, woob);
|
|
|
|
if (dump)
|
|
kfree(buf);
|
|
else
|
|
unmap_sysmem(buf);
|
|
|
|
if (ret) {
|
|
printf("%s on %s failed with error %d\n",
|
|
read ? "Read" : "Write", mtd->name, ret);
|
|
ret = CMD_RET_FAILURE;
|
|
} else {
|
|
ret = CMD_RET_SUCCESS;
|
|
}
|
|
|
|
out_put_mtd:
|
|
put_mtd_device(mtd);
|
|
|
|
return ret;
|
|
}
|
|
|
|
static int do_mtd_erase(cmd_tbl_t *cmdtp, int flag, int argc,
|
|
char * const argv[])
|
|
{
|
|
struct erase_info erase_op = {};
|
|
struct mtd_info *mtd;
|
|
u64 off, len;
|
|
bool scrub;
|
|
int ret = 0;
|
|
|
|
if (argc < 2)
|
|
return CMD_RET_USAGE;
|
|
|
|
mtd = get_mtd_by_name(argv[1]);
|
|
if (IS_ERR_OR_NULL(mtd))
|
|
return CMD_RET_FAILURE;
|
|
|
|
scrub = strstr(argv[0], ".dontskipbad");
|
|
|
|
argc -= 2;
|
|
argv += 2;
|
|
|
|
off = argc > 0 ? simple_strtoul(argv[0], NULL, 16) : 0;
|
|
len = argc > 1 ? simple_strtoul(argv[1], NULL, 16) : mtd->size;
|
|
|
|
if (!mtd_is_aligned_with_block_size(mtd, off)) {
|
|
printf("Offset not aligned with a block (0x%x)\n",
|
|
mtd->erasesize);
|
|
ret = CMD_RET_FAILURE;
|
|
goto out_put_mtd;
|
|
}
|
|
|
|
if (!mtd_is_aligned_with_block_size(mtd, len)) {
|
|
printf("Size not a multiple of a block (0x%x)\n",
|
|
mtd->erasesize);
|
|
ret = CMD_RET_FAILURE;
|
|
goto out_put_mtd;
|
|
}
|
|
|
|
printf("Erasing 0x%08llx ... 0x%08llx (%d eraseblock(s))\n",
|
|
off, off + len - 1, mtd_div_by_eb(len, mtd));
|
|
|
|
erase_op.mtd = mtd;
|
|
erase_op.addr = off;
|
|
erase_op.len = mtd->erasesize;
|
|
erase_op.scrub = scrub;
|
|
|
|
while (len) {
|
|
ret = mtd_erase(mtd, &erase_op);
|
|
|
|
if (ret) {
|
|
/* Abort if its not a bad block error */
|
|
if (ret != -EIO)
|
|
break;
|
|
printf("Skipping bad block at 0x%08llx\n",
|
|
erase_op.addr);
|
|
}
|
|
|
|
len -= mtd->erasesize;
|
|
erase_op.addr += mtd->erasesize;
|
|
}
|
|
|
|
if (ret && ret != -EIO)
|
|
ret = CMD_RET_FAILURE;
|
|
else
|
|
ret = CMD_RET_SUCCESS;
|
|
|
|
out_put_mtd:
|
|
put_mtd_device(mtd);
|
|
|
|
return ret;
|
|
}
|
|
|
|
static int do_mtd_bad(cmd_tbl_t *cmdtp, int flag, int argc,
|
|
char * const argv[])
|
|
{
|
|
struct mtd_info *mtd;
|
|
loff_t off;
|
|
|
|
if (argc < 2)
|
|
return CMD_RET_USAGE;
|
|
|
|
mtd = get_mtd_by_name(argv[1]);
|
|
if (IS_ERR_OR_NULL(mtd))
|
|
return CMD_RET_FAILURE;
|
|
|
|
if (!mtd_can_have_bb(mtd)) {
|
|
printf("Only NAND-based devices can have bad blocks\n");
|
|
goto out_put_mtd;
|
|
}
|
|
|
|
printf("MTD device %s bad blocks list:\n", mtd->name);
|
|
for (off = 0; off < mtd->size; off += mtd->erasesize) {
|
|
if (mtd_block_isbad(mtd, off))
|
|
printf("\t0x%08llx\n", off);
|
|
}
|
|
|
|
out_put_mtd:
|
|
put_mtd_device(mtd);
|
|
|
|
return CMD_RET_SUCCESS;
|
|
}
|
|
|
|
#ifdef CONFIG_AUTO_COMPLETE
|
|
static int mtd_name_complete(int argc, char * const argv[], char last_char,
|
|
int maxv, char *cmdv[])
|
|
{
|
|
int len = 0, n_found = 0;
|
|
struct mtd_info *mtd;
|
|
|
|
argc--;
|
|
argv++;
|
|
|
|
if (argc > 1 ||
|
|
(argc == 1 && (last_char == '\0' || isblank(last_char))))
|
|
return 0;
|
|
|
|
if (argc)
|
|
len = strlen(argv[0]);
|
|
|
|
mtd_for_each_device(mtd) {
|
|
if (argc &&
|
|
(len > strlen(mtd->name) ||
|
|
strncmp(argv[0], mtd->name, len)))
|
|
continue;
|
|
|
|
if (n_found >= maxv - 2) {
|
|
cmdv[n_found++] = "...";
|
|
break;
|
|
}
|
|
|
|
cmdv[n_found++] = mtd->name;
|
|
}
|
|
|
|
cmdv[n_found] = NULL;
|
|
|
|
return n_found;
|
|
}
|
|
#endif /* CONFIG_AUTO_COMPLETE */
|
|
|
|
#ifdef CONFIG_SYS_LONGHELP
|
|
static char mtd_help_text[] =
|
|
"- generic operations on memory technology devices\n\n"
|
|
"mtd list\n"
|
|
"mtd read[.raw][.oob] <name> <addr> [<off> [<size>]]\n"
|
|
"mtd dump[.raw][.oob] <name> [<off> [<size>]]\n"
|
|
"mtd write[.raw][.oob][.dontskipff] <name> <addr> [<off> [<size>]]\n"
|
|
"mtd erase[.dontskipbad] <name> [<off> [<size>]]\n"
|
|
"\n"
|
|
"Specific functions:\n"
|
|
"mtd bad <name>\n"
|
|
"\n"
|
|
"With:\n"
|
|
"\t<name>: NAND partition/chip name\n"
|
|
"\t<addr>: user address from/to which data will be retrieved/stored\n"
|
|
"\t<off>: offset in <name> in bytes (default: start of the part)\n"
|
|
"\t\t* must be block-aligned for erase\n"
|
|
"\t\t* must be page-aligned otherwise\n"
|
|
"\t<size>: length of the operation in bytes (default: the entire device)\n"
|
|
"\t\t* must be a multiple of a block for erase\n"
|
|
"\t\t* must be a multiple of a page otherwise (special case: default is a page with dump)\n"
|
|
"\n"
|
|
"The .dontskipff option forces writing empty pages, don't use it if unsure.\n";
|
|
#endif
|
|
|
|
U_BOOT_CMD_WITH_SUBCMDS(mtd, "MTD utils", mtd_help_text,
|
|
U_BOOT_SUBCMD_MKENT(list, 1, 1, do_mtd_list),
|
|
U_BOOT_SUBCMD_MKENT_COMPLETE(read, 5, 0, do_mtd_io,
|
|
mtd_name_complete),
|
|
U_BOOT_SUBCMD_MKENT_COMPLETE(write, 5, 0, do_mtd_io,
|
|
mtd_name_complete),
|
|
U_BOOT_SUBCMD_MKENT_COMPLETE(dump, 4, 0, do_mtd_io,
|
|
mtd_name_complete),
|
|
U_BOOT_SUBCMD_MKENT_COMPLETE(erase, 4, 0, do_mtd_erase,
|
|
mtd_name_complete),
|
|
U_BOOT_SUBCMD_MKENT_COMPLETE(bad, 2, 1, do_mtd_bad,
|
|
mtd_name_complete));
|