mirror of
https://github.com/AsahiLinux/u-boot
synced 2024-11-12 16:07:30 +00:00
8038b497e7
* This is done by limiting the ARM's bandwidth and setting DSS priority in the EMIF controller to ensure underflows do not occur.
279 lines
7.9 KiB
C
279 lines
7.9 KiB
C
/*
|
|
* DDR Configuration for AM33xx devices.
|
|
*
|
|
* Copyright (C) 2011 Texas Instruments Incorporated - http://www.ti.com/
|
|
*
|
|
* SPDX-License-Identifier: GPL-2.0+
|
|
*/
|
|
|
|
#include <asm/arch/cpu.h>
|
|
#include <asm/arch/ddr_defs.h>
|
|
#include <asm/arch/sys_proto.h>
|
|
#include <asm/io.h>
|
|
#include <asm/emif.h>
|
|
|
|
/**
|
|
* Base address for EMIF instances
|
|
*/
|
|
static struct emif_reg_struct *emif_reg[2] = {
|
|
(struct emif_reg_struct *)EMIF4_0_CFG_BASE,
|
|
(struct emif_reg_struct *)EMIF4_1_CFG_BASE};
|
|
|
|
/**
|
|
* Base addresses for DDR PHY cmd/data regs
|
|
*/
|
|
static struct ddr_cmd_regs *ddr_cmd_reg[2] = {
|
|
(struct ddr_cmd_regs *)DDR_PHY_CMD_ADDR,
|
|
(struct ddr_cmd_regs *)DDR_PHY_CMD_ADDR2};
|
|
|
|
static struct ddr_data_regs *ddr_data_reg[2] = {
|
|
(struct ddr_data_regs *)DDR_PHY_DATA_ADDR,
|
|
(struct ddr_data_regs *)DDR_PHY_DATA_ADDR2};
|
|
|
|
/**
|
|
* Base address for ddr io control instances
|
|
*/
|
|
static struct ddr_cmdtctrl *ioctrl_reg = {
|
|
(struct ddr_cmdtctrl *)DDR_CONTROL_BASE_ADDR};
|
|
|
|
static inline u32 get_mr(int nr, u32 cs, u32 mr_addr)
|
|
{
|
|
u32 mr;
|
|
|
|
mr_addr |= cs << EMIF_REG_CS_SHIFT;
|
|
writel(mr_addr, &emif_reg[nr]->emif_lpddr2_mode_reg_cfg);
|
|
|
|
mr = readl(&emif_reg[nr]->emif_lpddr2_mode_reg_data);
|
|
debug("get_mr: EMIF1 cs %d mr %08x val 0x%x\n", cs, mr_addr, mr);
|
|
if (((mr & 0x0000ff00) >> 8) == (mr & 0xff) &&
|
|
((mr & 0x00ff0000) >> 16) == (mr & 0xff) &&
|
|
((mr & 0xff000000) >> 24) == (mr & 0xff))
|
|
return mr & 0xff;
|
|
else
|
|
return mr;
|
|
}
|
|
|
|
static inline void set_mr(int nr, u32 cs, u32 mr_addr, u32 mr_val)
|
|
{
|
|
mr_addr |= cs << EMIF_REG_CS_SHIFT;
|
|
writel(mr_addr, &emif_reg[nr]->emif_lpddr2_mode_reg_cfg);
|
|
writel(mr_val, &emif_reg[nr]->emif_lpddr2_mode_reg_data);
|
|
}
|
|
|
|
static void configure_mr(int nr, u32 cs)
|
|
{
|
|
u32 mr_addr;
|
|
|
|
while (get_mr(nr, cs, LPDDR2_MR0) & LPDDR2_MR0_DAI_MASK)
|
|
;
|
|
set_mr(nr, cs, LPDDR2_MR10, 0x56);
|
|
|
|
set_mr(nr, cs, LPDDR2_MR1, 0x43);
|
|
set_mr(nr, cs, LPDDR2_MR2, 0x2);
|
|
|
|
mr_addr = LPDDR2_MR2 | EMIF_REG_REFRESH_EN_MASK;
|
|
set_mr(nr, cs, mr_addr, 0x2);
|
|
}
|
|
|
|
/*
|
|
* Configure EMIF4D5 registers and MR registers
|
|
*/
|
|
void config_sdram_emif4d5(const struct emif_regs *regs, int nr)
|
|
{
|
|
writel(0xA0, &emif_reg[nr]->emif_pwr_mgmt_ctrl);
|
|
writel(0xA0, &emif_reg[nr]->emif_pwr_mgmt_ctrl_shdw);
|
|
writel(0x1, &emif_reg[nr]->emif_iodft_tlgc);
|
|
writel(regs->zq_config, &emif_reg[nr]->emif_zq_config);
|
|
|
|
writel(regs->temp_alert_config, &emif_reg[nr]->emif_temp_alert_config);
|
|
writel(regs->emif_rd_wr_lvl_rmp_win,
|
|
&emif_reg[nr]->emif_rd_wr_lvl_rmp_win);
|
|
writel(regs->emif_rd_wr_lvl_rmp_ctl,
|
|
&emif_reg[nr]->emif_rd_wr_lvl_rmp_ctl);
|
|
writel(regs->emif_rd_wr_lvl_ctl, &emif_reg[nr]->emif_rd_wr_lvl_ctl);
|
|
writel(regs->emif_rd_wr_exec_thresh,
|
|
&emif_reg[nr]->emif_rd_wr_exec_thresh);
|
|
|
|
/*
|
|
* for most SOCs these registers won't need to be changed so only
|
|
* write to these registers if someone explicitly has set the
|
|
* register's value.
|
|
*/
|
|
if(regs->emif_cos_config) {
|
|
writel(regs->emif_prio_class_serv_map, &emif_reg[nr]->emif_prio_class_serv_map);
|
|
writel(regs->emif_connect_id_serv_1_map, &emif_reg[nr]->emif_connect_id_serv_1_map);
|
|
writel(regs->emif_connect_id_serv_2_map, &emif_reg[nr]->emif_connect_id_serv_2_map);
|
|
writel(regs->emif_cos_config, &emif_reg[nr]->emif_cos_config);
|
|
}
|
|
|
|
writel(regs->ref_ctrl, &emif_reg[nr]->emif_sdram_ref_ctrl);
|
|
writel(regs->ref_ctrl, &emif_reg[nr]->emif_sdram_ref_ctrl_shdw);
|
|
writel(regs->sdram_config, &emif_reg[nr]->emif_sdram_config);
|
|
writel(regs->sdram_config, &cstat->secure_emif_sdram_config);
|
|
|
|
if (emif_sdram_type() == EMIF_SDRAM_TYPE_LPDDR2) {
|
|
configure_mr(nr, 0);
|
|
configure_mr(nr, 1);
|
|
}
|
|
}
|
|
|
|
/**
|
|
* Configure SDRAM
|
|
*/
|
|
void config_sdram(const struct emif_regs *regs, int nr)
|
|
{
|
|
if (regs->zq_config) {
|
|
/*
|
|
* A value of 0x2800 for the REF CTRL will give us
|
|
* about 570us for a delay, which will be long enough
|
|
* to configure things.
|
|
*/
|
|
writel(0x2800, &emif_reg[nr]->emif_sdram_ref_ctrl);
|
|
writel(regs->zq_config, &emif_reg[nr]->emif_zq_config);
|
|
writel(regs->sdram_config, &cstat->secure_emif_sdram_config);
|
|
writel(regs->sdram_config, &emif_reg[nr]->emif_sdram_config);
|
|
writel(regs->ref_ctrl, &emif_reg[nr]->emif_sdram_ref_ctrl);
|
|
writel(regs->ref_ctrl, &emif_reg[nr]->emif_sdram_ref_ctrl_shdw);
|
|
}
|
|
writel(regs->ref_ctrl, &emif_reg[nr]->emif_sdram_ref_ctrl);
|
|
writel(regs->ref_ctrl, &emif_reg[nr]->emif_sdram_ref_ctrl_shdw);
|
|
writel(regs->sdram_config, &emif_reg[nr]->emif_sdram_config);
|
|
}
|
|
|
|
/**
|
|
* Set SDRAM timings
|
|
*/
|
|
void set_sdram_timings(const struct emif_regs *regs, int nr)
|
|
{
|
|
writel(regs->sdram_tim1, &emif_reg[nr]->emif_sdram_tim_1);
|
|
writel(regs->sdram_tim1, &emif_reg[nr]->emif_sdram_tim_1_shdw);
|
|
writel(regs->sdram_tim2, &emif_reg[nr]->emif_sdram_tim_2);
|
|
writel(regs->sdram_tim2, &emif_reg[nr]->emif_sdram_tim_2_shdw);
|
|
writel(regs->sdram_tim3, &emif_reg[nr]->emif_sdram_tim_3);
|
|
writel(regs->sdram_tim3, &emif_reg[nr]->emif_sdram_tim_3_shdw);
|
|
}
|
|
|
|
void __weak emif_get_ext_phy_ctrl_const_regs(const u32 **regs, u32 *size)
|
|
{
|
|
}
|
|
|
|
/*
|
|
* Configure EXT PHY registers
|
|
*/
|
|
static void ext_phy_settings(const struct emif_regs *regs, int nr)
|
|
{
|
|
u32 *ext_phy_ctrl_base = 0;
|
|
u32 *emif_ext_phy_ctrl_base = 0;
|
|
const u32 *ext_phy_ctrl_const_regs;
|
|
u32 i = 0;
|
|
u32 size;
|
|
|
|
ext_phy_ctrl_base = (u32 *)&(regs->emif_ddr_ext_phy_ctrl_1);
|
|
emif_ext_phy_ctrl_base =
|
|
(u32 *)&(emif_reg[nr]->emif_ddr_ext_phy_ctrl_1);
|
|
|
|
/* Configure external phy control timing registers */
|
|
for (i = 0; i < EMIF_EXT_PHY_CTRL_TIMING_REG; i++) {
|
|
writel(*ext_phy_ctrl_base, emif_ext_phy_ctrl_base++);
|
|
/* Update shadow registers */
|
|
writel(*ext_phy_ctrl_base++, emif_ext_phy_ctrl_base++);
|
|
}
|
|
|
|
/*
|
|
* external phy 6-24 registers do not change with
|
|
* ddr frequency
|
|
*/
|
|
emif_get_ext_phy_ctrl_const_regs(&ext_phy_ctrl_const_regs, &size);
|
|
|
|
if (!size)
|
|
return;
|
|
|
|
for (i = 0; i < size; i++) {
|
|
writel(ext_phy_ctrl_const_regs[i], emif_ext_phy_ctrl_base++);
|
|
/* Update shadow registers */
|
|
writel(ext_phy_ctrl_const_regs[i], emif_ext_phy_ctrl_base++);
|
|
}
|
|
}
|
|
|
|
/**
|
|
* Configure DDR PHY
|
|
*/
|
|
void config_ddr_phy(const struct emif_regs *regs, int nr)
|
|
{
|
|
/*
|
|
* disable initialization and refreshes for now until we
|
|
* finish programming EMIF regs.
|
|
*/
|
|
setbits_le32(&emif_reg[nr]->emif_sdram_ref_ctrl,
|
|
EMIF_REG_INITREF_DIS_MASK);
|
|
|
|
writel(regs->emif_ddr_phy_ctlr_1,
|
|
&emif_reg[nr]->emif_ddr_phy_ctrl_1);
|
|
writel(regs->emif_ddr_phy_ctlr_1,
|
|
&emif_reg[nr]->emif_ddr_phy_ctrl_1_shdw);
|
|
|
|
if (get_emif_rev((u32)emif_reg[nr]) == EMIF_4D5)
|
|
ext_phy_settings(regs, nr);
|
|
}
|
|
|
|
/**
|
|
* Configure DDR CMD control registers
|
|
*/
|
|
void config_cmd_ctrl(const struct cmd_control *cmd, int nr)
|
|
{
|
|
if (!cmd)
|
|
return;
|
|
|
|
writel(cmd->cmd0csratio, &ddr_cmd_reg[nr]->cm0csratio);
|
|
writel(cmd->cmd0iclkout, &ddr_cmd_reg[nr]->cm0iclkout);
|
|
|
|
writel(cmd->cmd1csratio, &ddr_cmd_reg[nr]->cm1csratio);
|
|
writel(cmd->cmd1iclkout, &ddr_cmd_reg[nr]->cm1iclkout);
|
|
|
|
writel(cmd->cmd2csratio, &ddr_cmd_reg[nr]->cm2csratio);
|
|
writel(cmd->cmd2iclkout, &ddr_cmd_reg[nr]->cm2iclkout);
|
|
}
|
|
|
|
/**
|
|
* Configure DDR DATA registers
|
|
*/
|
|
void config_ddr_data(const struct ddr_data *data, int nr)
|
|
{
|
|
int i;
|
|
|
|
if (!data)
|
|
return;
|
|
|
|
for (i = 0; i < DDR_DATA_REGS_NR; i++) {
|
|
writel(data->datardsratio0,
|
|
&(ddr_data_reg[nr]+i)->dt0rdsratio0);
|
|
writel(data->datawdsratio0,
|
|
&(ddr_data_reg[nr]+i)->dt0wdsratio0);
|
|
writel(data->datawiratio0,
|
|
&(ddr_data_reg[nr]+i)->dt0wiratio0);
|
|
writel(data->datagiratio0,
|
|
&(ddr_data_reg[nr]+i)->dt0giratio0);
|
|
writel(data->datafwsratio0,
|
|
&(ddr_data_reg[nr]+i)->dt0fwsratio0);
|
|
writel(data->datawrsratio0,
|
|
&(ddr_data_reg[nr]+i)->dt0wrsratio0);
|
|
}
|
|
}
|
|
|
|
void config_io_ctrl(const struct ctrl_ioregs *ioregs)
|
|
{
|
|
if (!ioregs)
|
|
return;
|
|
|
|
writel(ioregs->cm0ioctl, &ioctrl_reg->cm0ioctl);
|
|
writel(ioregs->cm1ioctl, &ioctrl_reg->cm1ioctl);
|
|
writel(ioregs->cm2ioctl, &ioctrl_reg->cm2ioctl);
|
|
writel(ioregs->dt0ioctl, &ioctrl_reg->dt0ioctl);
|
|
writel(ioregs->dt1ioctl, &ioctrl_reg->dt1ioctl);
|
|
#ifdef CONFIG_AM43XX
|
|
writel(ioregs->dt2ioctrl, &ioctrl_reg->dt2ioctrl);
|
|
writel(ioregs->dt3ioctrl, &ioctrl_reg->dt3ioctrl);
|
|
writel(ioregs->emif_sdram_config_ext,
|
|
&ioctrl_reg->emif_sdram_config_ext);
|
|
#endif
|
|
}
|