u-boot/arch/arm/dts/fsl-ls1028a-kontron-sl28-var1.dts
Michael Walle c7155d29fb arm: dts: sl28: sync dtbs
Copy the board device tree files from linux v5.14. On top of the v5.14
dtbs the changes of these two patches are included here which are needed
for u-boot:
  https://lore.kernel.org/linux-devicetree/20210831134013.1625527-7-michael@walle.cc/
  https://lore.kernel.org/linux-devicetree/20210831134013.1625527-8-michael@walle.cc/

At the time of this writing the patches were accepted and will be
included in 5.15.

Signed-off-by: Michael Walle <michael@walle.cc>
Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
2021-11-09 17:18:23 +05:30

59 lines
1.4 KiB
Text

// SPDX-License-Identifier: GPL-2.0+
/*
* Device Tree file for the Kontron SMARC-sAL28 board.
*
* This is for the network variant 1 which has one ethernet port. It is
* different than the base variant, which also has one port, but here the
* port is connected via RGMII. This port is not TSN aware.
* None of the four SerDes lanes are used by the module, instead they are
* all led out to the carrier for customer use.
*
* Copyright (C) 2021 Michael Walle <michael@walle.cc>
*
*/
/dts-v1/;
#include "fsl-ls1028a-kontron-sl28.dts"
#include <dt-bindings/net/qca-ar803x.h>
/ {
model = "Kontron SMARC-sAL28 (4 Lanes)";
compatible = "kontron,sl28-var1", "kontron,sl28", "fsl,ls1028a";
};
&enetc_mdio_pf3 {
/* Delete unused phy node */
/delete-node/ ethernet-phy@5;
phy0: ethernet-phy@4 {
reg = <0x4>;
eee-broken-1000t;
eee-broken-100tx;
qca,clk-out-frequency = <125000000>;
qca,clk-out-strength = <AR803X_STRENGTH_FULL>;
qca,keep-pll-enabled;
vddio-supply = <&vddio>;
vddio: vddio-regulator {
regulator-name = "VDDIO";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
};
vddh: vddh-regulator {
regulator-name = "VDDH";
};
};
};
&enetc_port0 {
status = "disabled";
/* Delete the phy-handle to the old phy0 label */
/delete-property/ phy-handle;
};
&enetc_port1 {
phy-handle = <&phy0>;
phy-mode = "rgmii-id";
status = "okay";
};