u-boot/arch/mips/mach-mtmips/mt7620/init.c
Weijie Gao dd4fdc0b14 mips: mtmips: add support for MediaTek MT7620 SoC
This patch adds support for MediaTek MT7620 SoC.
All files are dedicated for u-boot.

Reviewed-by: Stefan Roese <sr@denx.de>
Signed-off-by: Weijie Gao <weijie.gao@mediatek.com>
2021-01-24 21:39:26 +01:00

193 lines
4.5 KiB
C

// SPDX-License-Identifier: GPL-2.0
/*
* Copyright (C) 2020 MediaTek Inc. All Rights Reserved.
*
* Author: Weijie Gao <weijie.gao@mediatek.com>
*/
#include <config.h>
#include <asm/global_data.h>
#include <linux/io.h>
#include "mt7620.h"
DECLARE_GLOBAL_DATA_PTR;
static const char * const dram_type[] = {
"SDRAM", "DDR", "DDR2", "SDRAM"
};
static const char * const boot_mode[(CHIP_MODE_M >> CHIP_MODE_S) + 1] = {
[1] = "NAND 4-cycles 2KB-page",
[2] = "SPI-NOR 3-Byte Addr",
[3] = "SPI-NOR 4-Byte Addr",
[10] = "NAND 4-cycles 512B-page",
[11] = "NAND 5-cycles 2KB-page",
[12] = "NAND 3-cycles 512B-page",
};
static void cpu_pll_init(void)
{
void __iomem *sysc = ioremap_nocache(SYSCTL_BASE, SYSCTL_SIZE);
u32 pllmul = CONFIG_CPU_FREQ_MULTI;
/* Make sure the pll multiplier is valid */
if (pllmul > 7)
pllmul = 7;
/* Set init CPU clock to 480MHz */
clrsetbits_32(sysc + SYSCTL_CPLL_CFG1_REG, CPU_CLK_AUX1, CPU_CLK_AUX0);
/* Enable software control of CPU PLL */
setbits_32(sysc + SYSCTL_CPLL_CFG0_REG, CPLL_SW_CFG);
/* CPU PLL power down */
setbits_32(sysc + SYSCTL_CPLL_CFG1_REG, CPLL_PD);
/* PLL configuration */
clrsetbits_32(sysc + SYSCTL_CPLL_CFG0_REG, PLL_MULT_RATIO_M |
PLL_DIV_RATIO_M | SSC_UP_BOUND_M | SSC_EN,
(pllmul << PLL_MULT_RATIO_S) | SSC_SWING_M);
/* CPU PLL power up */
clrbits_32(sysc + SYSCTL_CPLL_CFG1_REG, CPLL_PD);
/* Wait for CPU PLL locked */
while (!(readl(sysc + SYSCTL_CPLL_CFG1_REG) & CPLL_LD))
;
/* Set final CPU clock source */
clrbits_32(sysc + SYSCTL_CPLL_CFG1_REG, CPU_CLK_AUX1 | CPU_CLK_AUX0);
/* Adjust CPU clock */
clrsetbits_32(sysc + SYSCTL_CPU_SYS_CLKCFG_REG,
CPU_FDIV_M | CPU_FFRAC_M,
(1 << CPU_FDIV_S) | (1 << CPU_FFRAC_S));
}
void mt7620_init(void)
{
u32 cpu_clk;
cpu_pll_init();
/*
* Set timer freq, which will be used during DRAM initialization
* Note that this function is using a temporary gd which will be
* destroyed after leaving this function.
*/
mt7620_get_clks(&cpu_clk, NULL, NULL);
gd->arch.timer_freq = cpu_clk / 2;
mt7620_dram_init();
}
void mt7620_get_clks(u32 *cpu_clk, u32 *sys_clk, u32 *xtal_clk)
{
void __iomem *sysc = ioremap_nocache(SYSCTL_BASE, SYSCTL_SIZE);
u32 val, multi, div, fdiv, ffrac, dram_type, sys_div;
u32 cpu_freq, xtal_freq;
static const u32 div_ratio_table[] = {2, 3, 4, 8};
val = readl(sysc + SYSCTL_SYSCFG0_REG);
dram_type = (val & DRAM_TYPE_M) >> DRAM_TYPE_S;
if (val & XTAL_FREQ_SEL)
xtal_freq = 40000000;
else
xtal_freq = 20000000;
val = readl(sysc + SYSCTL_CPLL_CFG1_REG);
if (val & CPU_CLK_AUX1) {
cpu_freq = xtal_freq;
} else if (val & CPU_CLK_AUX0) {
cpu_freq = 480000000;
} else {
val = readl(sysc + SYSCTL_CPLL_CFG0_REG);
if (val & CPLL_SW_CFG) {
multi = (val & PLL_MULT_RATIO_M) >> PLL_MULT_RATIO_S;
div = (val & PLL_DIV_RATIO_M) >> PLL_DIV_RATIO_S;
cpu_freq = (multi + 24) * 40000000 /
div_ratio_table[div];
} else {
cpu_freq = 600000000;
}
}
val = readl(sysc + SYSCTL_CUR_CLK_STS_REG);
ffrac = (val & CUR_CPU_FFRAC_M) >> CUR_CPU_FFRAC_S;
fdiv = (val & CUR_CPU_FDIV_M) >> CUR_CPU_FDIV_S;
cpu_freq = (cpu_freq * ffrac) / fdiv;
switch (dram_type) {
case DRAM_SDRAM_E1:
sys_div = 4;
break;
case DRAM_DDR1:
case DRAM_DDR2:
sys_div = 3;
break;
case DRAM_SDRAM:
sys_div = 5;
break;
}
if (cpu_clk)
*cpu_clk = cpu_freq;
if (sys_clk)
*sys_clk = cpu_freq / sys_div;
if (xtal_clk)
*xtal_clk = xtal_freq;
}
int print_cpuinfo(void)
{
void __iomem *sysc = ioremap_nocache(SYSCTL_BASE, SYSCTL_SIZE);
u32 cpu_clk, bus_clk, xtal_clk;
u32 val, ver, eco, pkg, dram, chipmode;
const char *bootdev;
val = readl(sysc + SYSCTL_CHIP_REV_ID_REG);
ver = (val & VER_M) >> VER_S;
eco = (val & ECO_M) >> ECO_S;
pkg = !!(val & PKG_ID);
val = readl(sysc + SYSCTL_SYSCFG0_REG);
dram = (val & DRAM_TYPE_M) >> DRAM_TYPE_S;
chipmode = (val & CHIP_MODE_M) >> CHIP_MODE_S;
bootdev = boot_mode[chipmode];
if (!bootdev)
bootdev = "Unsupported boot mode";
printf("CPU: MediaTek MT7620%c ver:%u eco:%u\n",
pkg ? 'A' : 'N', ver, eco);
printf("Boot: %s, %s\n", dram_type[dram], bootdev);
mt7620_get_clks(&cpu_clk, &bus_clk, &xtal_clk);
/* Set final timer frequency */
gd->arch.timer_freq = cpu_clk / 2;
printf("Clock: CPU: %uMHz, Bus: %uMHz, XTAL: %uMHz\n",
cpu_clk / 1000000, bus_clk / 1000000, xtal_clk / 1000000);
return 0;
}
ulong notrace get_tbclk(void)
{
return gd->arch.timer_freq;
}
void _machine_restart(void)
{
void __iomem *sysc = ioremap_nocache(SYSCTL_BASE, SYSCTL_SIZE);
while (1)
writel(SYS_RST, sysc + SYSCTL_RSTCTL_REG);
}