u-boot/tools/mrvl_uart.sh
Andreas Färber ceb3281803 tools/mrvl_uart.sh: Tidy script output
Fix a typo in help output (awailable -> available).
Tidy the grammar - not the board connects to a port, we do.

While at it, be consistent in upper-casing the comments.

Fixes: eee4835d22 ("tools: Add Marvell recovery image download script")
Cc: Konstantin Porotchkin <kostap@marvell.com>
Cc: Stefan Roese <sr@denx.de>
Cc: Igal Liberman <igall@marvell.com>
Signed-off-by: Andreas Färber <afaerber@suse.de>
Reviewed-by: Konstantin Porotchkin <kostap@marvell.com>
Reviewed-by: Stefan Roese <sr@denx.de>
Signed-off-by: Stefan Roese <sr@denx.de>
2018-01-29 13:36:32 +01:00

119 lines
2.8 KiB
Bash
Executable file

#!/bin/bash
#
######################################################
# Copyright (C) 2016 Marvell International Ltd.
#
# SPDX-License-Identifier: GPL-2.0
# https://spdx.org/licenses
#
# Author: Konstantin Porotchkin kostap@marvell.com
#
# Version 0.3
#
# UART recovery downloader for Armada SoCs
#
######################################################
port=$1
file=$2
speed=$3
pattern_repeat=1500
default_baudrate=115200
tmpfile=/tmp/xmodem.pattern
tools=( dd stty sx minicom )
case "$3" in
2)
fast_baudrate=230400
prefix="\xF2"
;;
4)
fast_baudrate=460800
prefix="\xF4"
;;
8)
fast_baudrate=921600
prefix="\xF8"
;;
*)
fast_baudrate=$default_baudrate
prefix="\xBB"
esac
if [[ -z "$port" || -z "$file" ]]
then
echo -e "\nMarvell recovery image downloader for Armada SoC family."
echo -e "Command syntax:"
echo -e "\t$(basename $0) <port> <file> [2|4|8]"
echo -e "\tport - serial port the target board is connected to"
echo -e "\tfile - recovery boot image for target download"
echo -e "\t2|4|8 - times to increase the default serial port speed by"
echo -e "For example - load the image over ttyUSB0 @ 460800 baud:"
echo -e "$(basename $0) /dev/ttyUSB0 /tmp/flash-image.bin 4\n"
echo -e "=====WARNING====="
echo -e "- The speed-up option is not available in SoC families prior to A8K+"
echo -e "- This utility is not compatible with Armada 37xx SoC family\n"
fi
# Sanity checks
if [ -c "$port" ]
then
echo -e "Using device connected on serial port \"$port\""
else
echo "Wrong serial port name!"
exit 1
fi
if [ -f "$file" ]
then
echo -e "Loading flash image file \"$file\""
else
echo "File $file does not exist!"
exit 1
fi
# Verify required tools installation
for tool in ${tools[@]}
do
toolname=`which $tool`
if [ -z "$toolname" ]
then
echo -e "Missing installation of \"$tool\" --> Exiting"
exit 1
fi
done
echo -e "Recovery will run at $fast_baudrate baud"
echo -e "========================================"
if [ -f "$tmpfile" ]
then
rm -f $tmpfile
fi
# Send the escape sequence to target board using default debug port speed
stty -F $port raw ignbrk time 5 $default_baudrate
counter=0
while [ $counter -lt $pattern_repeat ]; do
echo -n -e "$prefix\x11\x22\x33\x44\x55\x66\x77" >> $tmpfile
let counter=counter+1
done
echo -en "Press the \"Reset\" button on the target board and "
echo -en "the \"Enter\" key on the host keyboard simultaneously"
read
dd if=$tmpfile of=$port &>/dev/null
# Speed up the binary image transfer
stty -F $port raw ignbrk time 5 $fast_baudrate
sx -vv $file > $port < $port
#sx-at91 $port $file
# Return the port to the default speed
stty -F $port raw ignbrk time 5 $default_baudrate
# Optional - fire up Minicom
minicom -D $port -b $default_baudrate