mirror of
https://github.com/AsahiLinux/u-boot
synced 2024-11-18 10:48:51 +00:00
1180baec98
A simple prototyping board with one microSD port, one Ethernet port, 2 USB ports, I2C, SPI, GPIO, and UART interfaces. Signed-off-by: Oleh Kravchenko <oleg@kaa.org.ua> Cc: Stefano Babic <sbabic@denx.de>
109 lines
2.1 KiB
Text
109 lines
2.1 KiB
Text
// SPDX-License-Identifier: GPL-2.0+
|
|
// Copyright (C) 2021 Oleh Kravchenko <oleg@kaa.org.ua>
|
|
|
|
/dts-v1/;
|
|
|
|
#include "o4-imx6ull-nano.dtsi"
|
|
|
|
/ {
|
|
model = "EV-iMX280-NANO-X-MB";
|
|
compatible = "evodbg,ev-imx280-nano-x-mb",
|
|
"out4,o4-imx6ull-nano",
|
|
"fsl,imx6ull";
|
|
|
|
aliases {
|
|
mmc1 = &usdhc1;
|
|
};
|
|
|
|
chosen {
|
|
stdout-path = &uart1;
|
|
};
|
|
};
|
|
|
|
&iomuxc {
|
|
pinctrl_uart1: uart1grp {
|
|
fsl,pins = <
|
|
MX6UL_PAD_UART1_RX_DATA__UART1_DCE_RX 0x1b0b1
|
|
MX6UL_PAD_UART1_TX_DATA__UART1_DCE_TX 0x1b0b1
|
|
>;
|
|
};
|
|
|
|
pinctrl_usdhc1: usdhc1grp {
|
|
fsl,pins = <
|
|
MX6UL_PAD_SD1_CLK__USDHC1_CLK 0x10069
|
|
MX6UL_PAD_SD1_CMD__USDHC1_CMD 0x17059
|
|
MX6UL_PAD_SD1_DATA0__USDHC1_DATA0 0x17059
|
|
MX6UL_PAD_SD1_DATA1__USDHC1_DATA1 0x17059
|
|
MX6UL_PAD_SD1_DATA2__USDHC1_DATA2 0x17059
|
|
MX6UL_PAD_SD1_DATA3__USDHC1_DATA3 0x17059
|
|
MX6UL_PAD_UART1_RTS_B__USDHC1_CD_B 0x03029
|
|
>;
|
|
};
|
|
|
|
pinctrl_mdio: mdiogrp {
|
|
fsl,pins = <
|
|
MX6UL_PAD_GPIO1_IO06__ENET1_MDIO 0x1b0b0
|
|
MX6UL_PAD_GPIO1_IO07__ENET1_MDC 0x1b0b0
|
|
MX6UL_PAD_SNVS_TAMPER1__GPIO5_IO01 0xb0b0 /* RST */
|
|
>;
|
|
};
|
|
|
|
pinctrl_usb_otg1_id: usbotg1idgrp {
|
|
fsl,pins = <
|
|
MX6UL_PAD_GPIO1_IO00__ANATOP_OTG1_ID 0x17059
|
|
>;
|
|
};
|
|
};
|
|
|
|
&uart1 {
|
|
pinctrl-0 = <&pinctrl_uart1>;
|
|
pinctrl-names = "default";
|
|
status = "okay";
|
|
};
|
|
|
|
&usdhc1 {
|
|
bus-width = <4>;
|
|
no-1-8-v;
|
|
pinctrl-0 = <&pinctrl_usdhc1>;
|
|
pinctrl-names = "default";
|
|
status = "okay";
|
|
wakeup-source;
|
|
};
|
|
|
|
&fec1 {
|
|
phy-handle = <&phy0>;
|
|
phy-mode = "rmii";
|
|
phy-reset-duration = <250>;
|
|
phy-reset-post-delay = <100>;
|
|
phy-reset-gpios = <&gpio5 1 GPIO_ACTIVE_LOW>;
|
|
pinctrl-0 = <&pinctrl_fec1 &pinctrl_mdio>;
|
|
pinctrl-names = "default";
|
|
status = "okay";
|
|
|
|
mdio {
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
|
|
phy0: ethernet-phy@0 {
|
|
clocks = <&clks IMX6UL_CLK_ENET_REF>;
|
|
clock-names = "rmii-ref";
|
|
interrupt-parent = <&gpio5>;
|
|
interrupts = <7 IRQ_TYPE_EDGE_FALLING>;
|
|
pinctrl-0 = <&pinctrl_phy0_irq>;
|
|
pinctrl-names = "default";
|
|
reg = <0>;
|
|
};
|
|
};
|
|
};
|
|
|
|
&usbotg1 {
|
|
dr_mode = "otg";
|
|
pinctrl-0 = <&pinctrl_usb_otg1_id>;
|
|
pinctrl-names = "default";
|
|
status = "okay";
|
|
};
|
|
|
|
&usbotg2 {
|
|
dr_mode = "host";
|
|
status = "okay";
|
|
};
|