u-boot/board/davinci/common/misc.c
Ben Gardiner 7b37a27e14 davinci_emac: davinci_eth_set_mac_addr to ->write_hwaddr
This patch proposes to migrate the davinci_emac driver to using the
eth_device->write_hwaddr function pointer as suggested by Ben Warren.

All the davinci boards had the behaviour, prior to this patch, of
sync'ing the environment variable enetaddr with the MAC address read
from non-volatile storage on boot -- when the two locations disagreed,
the environment variable value took precendence. This patch keeps the
same behaviour but lets eth_initialize take care of it.

This patch refactors davinci_emac setup in the boards so that the MAC
address is read from non-volatile storage into the environment variable
and then the environment variable value is use in eth_intialize. The
only exception is the direct call to davinci_eth_set_mac_addr made by
the da830evm board init which was changed into an assignment of the
enetaddr field.

Signed-off-by: Ben Gardiner <bengardiner@nanometrics.ca>
Tested-by: Nick Thompson <nick.thompson@ge.com>
Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
2010-10-11 23:07:17 -07:00

182 lines
4.8 KiB
C

/*
* Miscelaneous DaVinci functions.
*
* Copyright (C) 2009 Nick Thompson, GE Fanuc Ltd, <nick.thompson@gefanuc.com>
* Copyright (C) 2007 Sergey Kubushyn <ksi@koi8.net>
* Copyright (C) 2008 Lyrtech <www.lyrtech.com>
* Copyright (C) 2004 Texas Instruments.
*
* See file CREDITS for list of people who contributed to this
* project.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
*/
#include <common.h>
#include <i2c.h>
#include <net.h>
#include <asm/arch/hardware.h>
#include <asm/io.h>
#include "misc.h"
DECLARE_GLOBAL_DATA_PTR;
#if defined(CONFIG_SYS_ARM_WITHOUT_RELOC)
int dram_init(void)
{
gd->bd->bi_dram[0].start = PHYS_SDRAM_1;
gd->bd->bi_dram[0].size = PHYS_SDRAM_1_SIZE;
return(0);
}
#else
int dram_init(void)
{
/* dram_init must store complete ramsize in gd->ram_size */
gd->ram_size = get_ram_size(
(volatile void *)CONFIG_SYS_SDRAM_BASE,
CONFIG_MAX_RAM_BANK_SIZE);
return 0;
}
void dram_init_banksize(void)
{
gd->bd->bi_dram[0].start = CONFIG_SYS_SDRAM_BASE;
gd->bd->bi_dram[0].size = gd->ram_size;
}
#endif
#ifdef CONFIG_DRIVER_TI_EMAC
/* Read ethernet MAC address from EEPROM for DVEVM compatible boards.
* Returns 1 if found, 0 otherwise.
*/
int dvevm_read_mac_address(uint8_t *buf)
{
#ifdef CONFIG_SYS_I2C_EEPROM_ADDR
/* Read MAC address. */
if (i2c_read(CONFIG_SYS_I2C_EEPROM_ADDR, 0x7F00, CONFIG_SYS_I2C_EEPROM_ADDR_LEN,
(uint8_t *) &buf[0], 6))
goto i2cerr;
/* Check that MAC address is valid. */
if (!is_valid_ether_addr(buf))
goto err;
return 1; /* Found */
i2cerr:
printf("Read from EEPROM @ 0x%02x failed\n", CONFIG_SYS_I2C_EEPROM_ADDR);
err:
#endif /* CONFIG_SYS_I2C_EEPROM_ADDR */
return 0;
}
/*
* If there is no MAC address in the environment, then it will be initialized
* (silently) from the value in the EEPROM.
*/
void davinci_sync_env_enetaddr(uint8_t *rom_enetaddr)
{
uint8_t env_enetaddr[6];
eth_getenv_enetaddr_by_index(0, env_enetaddr);
if (!memcmp(env_enetaddr, "\0\0\0\0\0\0", 6)) {
/* There is no MAC address in the environment, so we initialize
* it from the value in the EEPROM. */
debug("### Setting environment from EEPROM MAC address = "
"\"%pM\"\n",
env_enetaddr);
eth_setenv_enetaddr("ethaddr", rom_enetaddr);
}
}
#endif /* DAVINCI_EMAC */
/*
* Change the setting of a pin multiplexer field.
*
* Takes an array of pinmux settings similar to:
*
* struct pinmux_config uart_pins[] = {
* { &davinci_syscfg_regs->pinmux[8], 2, 7 },
* { &davinci_syscfg_regs->pinmux[9], 2, 0 }
* };
*
* Stepping through the array, each pinmux[n] register has the given value
* set in the pin mux field specified.
*
* The number of pins in the array must be passed (ARRAY_SIZE can provide
* this value conveniently).
*
* Returns 0 if all field numbers and values are in the correct range,
* else returns -1.
*/
int davinci_configure_pin_mux(const struct pinmux_config *pins,
const int n_pins)
{
int i;
/* check for invalid pinmux values */
for (i = 0; i < n_pins; i++) {
if (pins[i].field >= PIN_MUX_NUM_FIELDS ||
(pins[i].value & ~PIN_MUX_FIELD_MASK) != 0)
return -1;
}
/* configure the pinmuxes */
for (i = 0; i < n_pins; i++) {
const int offset = pins[i].field * PIN_MUX_FIELD_SIZE;
const unsigned int value = pins[i].value << offset;
const unsigned int mask = PIN_MUX_FIELD_MASK << offset;
const dv_reg *mux = pins[i].mux;
writel(value | (readl(mux) & (~mask)), mux);
}
return 0;
}
/*
* Configure multiple pinmux resources.
*
* Takes an pinmux_resource array of pinmux_config and pin counts:
*
* const struct pinmux_resource pinmuxes[] = {
* PINMUX_ITEM(uart_pins),
* PINMUX_ITEM(i2c_pins),
* };
*
* The number of items in the array must be passed (ARRAY_SIZE can provide
* this value conveniently).
*
* Each item entry is configured in the defined order. If configuration
* of any item fails, -1 is returned and none of the following items are
* configured. On success, 0 is returned.
*/
int davinci_configure_pin_mux_items(const struct pinmux_resource *item,
const int n_items)
{
int i;
for (i = 0; i < n_items; i++) {
if (davinci_configure_pin_mux(item[i].pins,
item[i].n_pins) != 0)
return -1;
}
return 0;
}