mirror of
https://github.com/AsahiLinux/u-boot
synced 2024-11-07 21:54:45 +00:00
fa14fa71f7
Convert README to reStructuredText format. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com> Reviewed-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> Tested-by: Bin Meng <bmeng.cn@gmail.com> [bmeng: spell out U-Boot correctly] Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
112 lines
2.6 KiB
ReStructuredText
112 lines
2.6 KiB
ReStructuredText
.. SPDX-License-Identifier: GPL-2.0+
|
|
|
|
Verdin iMX8M Mini Module
|
|
========================
|
|
|
|
Quick Start
|
|
-----------
|
|
|
|
- Build the ARM trusted firmware binary
|
|
- Get the DDR firmware
|
|
- Build U-Boot
|
|
- Flash to eMMC
|
|
- Boot
|
|
|
|
Get and Build the ARM Trusted Firmware (Trusted Firmware A)
|
|
-----------------------------------------------------------
|
|
|
|
.. code-block:: bash
|
|
|
|
$ echo "Downloading and building TF-A..."
|
|
$ git clone -b imx_4.14.98_2.3.0 \
|
|
https://source.codeaurora.org/external/imx/imx-atf
|
|
$ cd imx-atf
|
|
|
|
Please edit ``plat/imx/imx8mm/include/platform_def.h`` so it contains proper
|
|
values for UART configuration and BL31 base address (correct values listed
|
|
below):
|
|
|
|
.. code-block:: bash
|
|
|
|
#define BL31_BASE 0x910000
|
|
#define IMX_BOOT_UART_BASE 0x30860000
|
|
#define DEBUG_CONSOLE 1
|
|
|
|
Then build ATF (TF-A):
|
|
|
|
.. code-block:: bash
|
|
|
|
$ make PLAT=imx8mm bl31
|
|
|
|
Get the DDR Firmware
|
|
--------------------
|
|
|
|
.. code-block:: bash
|
|
|
|
$ wget https://www.nxp.com/lgfiles/NMG/MAD/YOCTO/firmware-imx-8.4.1.bin
|
|
$ chmod +x firmware-imx-8.4.1.bin
|
|
$ ./firmware-imx-8.4.1.bin
|
|
$ cp firmware-imx-8.4.1/firmware/ddr/synopsys/lpddr4*.bin ./
|
|
|
|
Build U-Boot
|
|
------------
|
|
.. code-block:: bash
|
|
|
|
$ export CROSS_COMPILE=aarch64-linux-gnu-
|
|
$ make verdin-imx8mm_defconfig
|
|
$ make flash.bin
|
|
|
|
Flash to eMMC
|
|
-------------
|
|
|
|
.. code-block:: bash
|
|
|
|
> tftpboot ${loadaddr} flash.bin
|
|
> setexpr blkcnt ${filesize} + 0x1ff && setexpr blkcnt ${blkcnt} / 0x200
|
|
> mmc dev 0 1 && mmc write ${loadaddr} 0x2 ${blkcnt}
|
|
|
|
As a convenience, instead of the last two commands one may also use the update
|
|
U-Boot wrapper:
|
|
|
|
.. code-block:: bash
|
|
|
|
> run update_uboot
|
|
|
|
Boot
|
|
----
|
|
|
|
ATF, U-Boot proper and u-boot.dtb images are packed into FIT image,
|
|
which is loaded and parsed by SPL.
|
|
|
|
Boot sequence is:
|
|
|
|
* SPL ---> ATF (TF-A) ---> U-Boot proper
|
|
|
|
Output:
|
|
|
|
.. code-block:: bash
|
|
|
|
U-Boot SPL 2020.01-00187-gd411d164e5 (Jan 26 2020 - 04:47:26 +0100)
|
|
Normal Boot
|
|
Trying to boot from MMC1
|
|
NOTICE: Configuring TZASC380
|
|
NOTICE: RDC off
|
|
NOTICE: BL31: v2.0(release):rel_imx_4.14.98_2.3.0-0-g09c5cc994-dirty
|
|
NOTICE: BL31: Built : 01:11:41, Jan 25 2020
|
|
NOTICE: sip svc init
|
|
|
|
|
|
U-Boot 2020.01-00187-gd411d164e5 (Jan 26 2020 - 04:47:26 +0100)
|
|
|
|
CPU: Freescale i.MX8MMQ rev1.0 at 0 MHz
|
|
Reset cause: POR
|
|
DRAM: 2 GiB
|
|
MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2
|
|
Loading Environment from MMC... OK
|
|
In: serial
|
|
Out: serial
|
|
Err: serial
|
|
Model: Toradex Verdin iMX8M Mini Quad 2GB Wi-Fi / BT IT V1.0A, Serial:
|
|
Net: eth0: ethernet@30be0000
|
|
Hit any key to stop autoboot: 0
|
|
Verdin iMX8MM #
|